This new callback can be used to tune the rate to be used to send multicast
frames. The callback can be used with vif configured as ADHOC or MESH_POINT
only.
In the current state the multicast rate can be specified on IBSS/MESH joining
only. This makes it impossible to select a custom multicast rate when then join
command is sent by an external program (e.g. wpa_supplicant)
Signed-off-by: Antonio Quartulli <ordex@xxxxxxxxxxxxx>
---
net/mac80211/cfg.c | 7 +++++++
net/mac80211/ieee80211_i.h | 3 +++
net/mac80211/util.c | 12 ++++++++++++
3 files changed, 22 insertions(+)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index ed27988..21461dc 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1924,6 +1924,12 @@ static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
return ieee80211_ibss_leave(IEEE80211_DEV_TO_SUB_IF(dev));
}
+static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev,
+ int rate[IEEE80211_NUM_BANDS])
+{
+ return ieee80211_mcast_rate(IEEE80211_DEV_TO_SUB_IF(dev), rate);
+}
+
static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
@@ -3123,6 +3129,7 @@ struct cfg80211_ops mac80211_config_ops = {
.disassoc = ieee80211_disassoc,
.join_ibss = ieee80211_join_ibss,
.leave_ibss = ieee80211_leave_ibss,
+ .set_mcast_rate = ieee80211_set_mcast_rate,
.set_wiphy_params = ieee80211_set_wiphy_params,
.set_tx_power = ieee80211_set_tx_power,
.get_tx_power = ieee80211_get_tx_power,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 78c4bbb..e3b9eff 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1575,6 +1575,9 @@ void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata);
void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local,
struct ieee80211_chanctx *chanctx);
+int ieee80211_mcast_rate(struct ieee80211_sub_if_data *sdata,
+ int rate[IEEE80211_NUM_BANDS]);
+
#ifdef CONFIG_MAC80211_NOINLINE
#define debug_noinline noinline
#else
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 350b7a7..c9f6813 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1959,3 +1959,15 @@ u8 ieee80211_mcs_to_chains(const struct ieee80211_mcs_info *mcs)
return 2;
return 1;
}
+
+int ieee80211_mcast_rate(struct ieee80211_sub_if_data *sdata,
+ int rate[IEEE80211_NUM_BANDS])
+{
+ if (sdata->vif.type != NL80211_IFTYPE_ADHOC &&
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
+ return -EOPNOTSUPP;
+
+ memcpy(sdata->vif.bss_conf.mcast_rate, &rate, sizeof(rate));
+
+ return 0;
+}
--
1.7.12.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
