When the BT connection is initiated by headset, it's possible that headset
requests to make one A2DP and one Voice connection over the same link.
BT firmware will send a new profile A2DP_Voice in this case. So WLAN
has to take care of this new profile for tuning BTCOEX parameters.
Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 1 +
drivers/net/wireless/ath/ath9k/mci.h | 2 ++
2 files changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
index 3e51f54..66d7ab9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -126,6 +126,7 @@ enum ath_mci_gpm_coex_profile_type {
MCI_GPM_COEX_PROFILE_HID,
MCI_GPM_COEX_PROFILE_BNEP,
MCI_GPM_COEX_PROFILE_VOICE,
+ MCI_GPM_COEX_PROFILE_A2DPVO,
MCI_GPM_COEX_PROFILE_MAX
};
diff --git a/drivers/net/wireless/ath/ath9k/mci.h b/drivers/net/wireless/ath/ath9k/mci.h
index e5f170a..0695883 100644
--- a/drivers/net/wireless/ath/ath9k/mci.h
+++ b/drivers/net/wireless/ath/ath9k/mci.h
@@ -70,6 +70,7 @@
_mci->num_pan++; \
break; \
case MCI_GPM_COEX_PROFILE_VOICE: \
+ case MCI_GPM_COEX_PROFILE_A2DPVO:\
_mci->num_sco++; \
break; \
default: \
@@ -94,6 +95,7 @@
_mci->num_pan--; \
break; \
case MCI_GPM_COEX_PROFILE_VOICE: \
+ case MCI_GPM_COEX_PROFILE_A2DPVO:\
_mci->num_sco--; \
break; \
default: \
--
1.7.12.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
