Hi, Here is the set of fixes for AR9565 BTCoex issues -Rajkumar Bala Shanmugam (2): ath9k: Set appropriate bit for AR9565 in btc control register ath9k: turn off RXIQ calibration while re-calibrating radio Rajkumar Manoharan (10): ath9k_hw: Enable OSLA hw fix for AR9565 ath9k_hw: Fix selfgen chainmask for 9565 ath9k_hw: Disable MCI stat counter by default for AR9565 ath9k_hw: Fix frequent BT rx recovery ath9k_hw: program radio_post_sys2ant initval for AR9565 ath9k_hw: Fix max rx rate drop for AR9565 ath9k_hw: Configure new switch table for AR9565 BTCOEX ath9k_hw: Set default MCI config for AR9565 ath9k: adjust duty cycle for FTP profile for AR9565 ath9k: Add new BT profile info A2DP_Voice drivers/net/wireless/ath/ath9k/ar9003_calib.c | 5 +++ drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_mci.c | 45 +++++++++++++++++++++++--- drivers/net/wireless/ath/ath9k/ar9003_mci.h | 2 ++ drivers/net/wireless/ath/ath9k/ar9003_phy.c | 5 +-- drivers/net/wireless/ath/ath9k/ar9003_phy.h | 1 + drivers/net/wireless/ath/ath9k/btcoex.c | 2 +- drivers/net/wireless/ath/ath9k/btcoex.h | 1 + drivers/net/wireless/ath/ath9k/mci.c | 2 +- drivers/net/wireless/ath/ath9k/mci.h | 2 ++ drivers/net/wireless/ath/ath9k/reg.h | 7 ++++ 11 files changed, 64 insertions(+), 10 deletions(-) -- 1.7.12.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html