I've had the same experience, I can connect with iw, but not with
wpa_supplicant with wpa. I also couldn't get higher than 65Mbps, MCS7
(other devices on the same router will go faster). I'm probably the
other post you mentioned.
Jon
On 12-09-26 07:02 AM, Ben Gray wrote:
Hi,
I have a bunch of UB134 USB dongles which have a ath6kl chip with
H/W version 0x31c8088a, I'm trying to get them to work with the ath6kl
driver from the compat-wireless-3.6-rc5-1 package. I've applied this
(https://patchwork.kernel.org/patch/1203191/) patch to the source and
pulled the hw1.3 firmware from the linux-firmware git.
The driver works as far as it can scan AP's and connect to
unencrypted networks, however WPA/WPA2 doesn't work when I run
wpa_supplicant. I realise "WPA doesn't work" is a bit vague, and I can
post the wpa_supplicant and driver logs if that helps, but I've seen
another post which says they couldn't get WPA to work either, so I'd
like to know if this is a known issue with the driver and/or firmware?
Has anyone had any luck getting WPA/WPA2 working with ath6kl hw1.3 ?
If this is a known issue does anyone know when it might be fixed ?
Thanks in advance,
Ben.
--
To unsubscribe from this list: send the line "unsubscribe
linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
