Search Linux Wireless

Re: [PATCH 5/5] rt2x00: Clean up RFCSR1 programming in rt2800_config_channel_rf3xxx.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Sep 16, 2012 at 10:29 PM, Gertjan van Wingerde
<gwingerde@xxxxxxxxx> wrote:
> Setting of the individual fields of the RF register can be simplified.
>
> Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>

Acked-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>

> diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
> index d745c32..540c94f 100644
> --- a/drivers/net/wireless/rt2x00/rt2800lib.c
> +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
> @@ -1763,36 +1763,15 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
>
>         rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
>         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
> +       rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
> +                         rt2x00dev->default_ant.rx_chain_num <= 1);
> +       rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD,
> +                         rt2x00dev->default_ant.rx_chain_num <= 2);
>         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
> -       if (rt2x00_rt(rt2x00dev, RT3390)) {
> -               rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
> -                                 rt2x00dev->default_ant.rx_chain_num == 1);
> -               rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
> -                                 rt2x00dev->default_ant.tx_chain_num == 1);
> -       } else {
> -               rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
> -               rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
> -               rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
> -               rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
> -
> -               switch (rt2x00dev->default_ant.tx_chain_num) {
> -               case 1:
> -                       rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
> -                       /* fall through */
> -               case 2:
> -                       rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
> -                       break;
> -               }
> -
> -               switch (rt2x00dev->default_ant.rx_chain_num) {
> -               case 1:
> -                       rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
> -                       /* fall through */
> -               case 2:
> -                       rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
> -                       break;
> -               }
> -       }
> +       rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
> +                         rt2x00dev->default_ant.tx_chain_num <= 1);
> +       rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD,
> +                         rt2x00dev->default_ant.tx_chain_num <= 2);
>         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
>
>         rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
> --
> 1.7.11.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux