On Fri, Aug 31, 2012 at 7:22 PM, Gertjan van Wingerde
<gwingerde@xxxxxxxxx> wrote:
> Ensure that all active GPIO pins are included in the GPIO register
> definitions, nothing more and nothing less.
>
> Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
Acked-by: Ivo van Doorn@xxxxxxxxx>
> diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
> index 7564ae9..9d78a53 100644
> --- a/drivers/net/wireless/rt2x00/rt2400pci.h
> +++ b/drivers/net/wireless/rt2x00/rt2400pci.h
> @@ -671,6 +671,13 @@
> #define GPIOCSR_BIT6 FIELD32(0x00000040)
> #define GPIOCSR_BIT7 FIELD32(0x00000080)
> #define GPIOCSR_BIT8 FIELD32(0x00000100)
> +#define GPIOCSR_BIT9 FIELD32(0x00000200)
> +#define GPIOCSR_BIT10 FIELD32(0x00000400)
> +#define GPIOCSR_BIT11 FIELD32(0x00000800)
> +#define GPIOCSR_BIT12 FIELD32(0x00001000)
> +#define GPIOCSR_BIT13 FIELD32(0x00002000)
> +#define GPIOCSR_BIT14 FIELD32(0x00004000)
> +#define GPIOCSR_BIT15 FIELD32(0x00008000)
>
> /*
> * BBPPCSR: BBP Pin control register.
> diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
> index 196bd51..9652300 100644
> --- a/drivers/net/wireless/rt2x00/rt2500usb.h
> +++ b/drivers/net/wireless/rt2x00/rt2500usb.h
> @@ -198,6 +198,13 @@
> #define MAC_CSR19_BIT6 FIELD16(0x0040)
> #define MAC_CSR19_BIT7 FIELD16(0x0080)
> #define MAC_CSR19_BIT8 FIELD16(0x0100)
> +#define MAC_CSR19_BIT9 FIELD16(0x0200)
> +#define MAC_CSR19_BIT10 FIELD16(0x0400)
> +#define MAC_CSR19_BIT11 FIELD16(0x0800)
> +#define MAC_CSR19_BIT12 FIELD16(0x1000)
> +#define MAC_CSR19_BIT13 FIELD16(0x2000)
> +#define MAC_CSR19_BIT14 FIELD16(0x4000)
> +#define MAC_CSR19_BIT15 FIELD16(0x8000)
>
> /*
> * MAC_CSR20: LED control register.
> diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
> index e252e9b..a838e17 100644
> --- a/drivers/net/wireless/rt2x00/rt2800.h
> +++ b/drivers/net/wireless/rt2x00/rt2800.h
> @@ -459,6 +459,12 @@
> #define GPIO_CTRL_CFG_GPIOD_BIT5 FIELD32(0x00002000)
> #define GPIO_CTRL_CFG_GPIOD_BIT6 FIELD32(0x00004000)
> #define GPIO_CTRL_CFG_GPIOD_BIT7 FIELD32(0x00008000)
> +#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00010000)
> +#define GPIO_CTRL_CFG_BIT9 FIELD32(0x00020000)
> +#define GPIO_CTRL_CFG_BIT10 FIELD32(0x00040000)
> +#define GPIO_CTRL_CFG_GPIOD_BIT8 FIELD32(0x01000000)
> +#define GPIO_CTRL_CFG_GPIOD_BIT9 FIELD32(0x02000000)
> +#define GPIO_CTRL_CFG_GPIOD_BIT10 FIELD32(0x04000000)
>
> /*
> * MCU_CMD_CFG
> diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
> index 8f3da5a..9ee0c33 100644
> --- a/drivers/net/wireless/rt2x00/rt61pci.h
> +++ b/drivers/net/wireless/rt2x00/rt61pci.h
> @@ -365,8 +365,6 @@ struct hw_pairwise_ta_entry {
> #define MAC_CSR13_BIT3 FIELD32(0x00000008)
> #define MAC_CSR13_BIT4 FIELD32(0x00000010)
> #define MAC_CSR13_BIT5 FIELD32(0x00000020)
> -#define MAC_CSR13_BIT6 FIELD32(0x00000040)
> -#define MAC_CSR13_BIT7 FIELD32(0x00000080)
> #define MAC_CSR13_BIT8 FIELD32(0x00000100)
> #define MAC_CSR13_BIT9 FIELD32(0x00000200)
> #define MAC_CSR13_BIT10 FIELD32(0x00000400)
> --
> 1.7.11.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
