[PATCH 14/17] rt2x00: Fix rt73usb rfkill polling prior to interface start.

[Gertjan van Wingerde <gwingerde@xxxxxxxxx>]

We need to program the rfkill switch GPIO pin direction to input at
device initialization time, not only when the interface is brought up.
Doing this only when the interface is brought up could lead to rfkill
detecting the switch is turned on erroneously and inability to create
the interface and bringing it up.

Reported-and-tested-by: Andreas Messer <andi@xxxxxxxxxxxx>
Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>

diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d5b6fb8..cfa9f37 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2177,6 +2177,7 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -2190,6 +2191,14 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00usb_register_read(rt2x00dev, MAC_CSR13, &reg);
+	rt2x00_set_field32(&reg, MAC_CSR13_DIR7, 0);
+	rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt73usb_probe_hw_mode(rt2x00dev);
-- 
1.7.11.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html