[PATCH 08/14] rt2x00: Align rt61pci MAC_CSR13 definition with datasheet.

[Gertjan van Wingerde <gwingerde@xxxxxxxxx>]

Rename MAC_CSR13_BIT<x> to MAC_CSR13_VAL<x> and MAC_CSR13_DIR<x> to
represent the actual meaning better.
Clean up list to only mention the active GPIO pins, not just all bits.

Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>

diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 3f7bc5c..d84b17f 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -243,7 +243,7 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	u32 reg;
 
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
-	return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
+	return rt2x00_get_field32(reg, MAC_CSR13_VAL5);
 }
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
@@ -715,11 +715,11 @@ static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev,
 
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
 
-	rt2x00_set_field32(&reg, MAC_CSR13_BIT4, p1);
-	rt2x00_set_field32(&reg, MAC_CSR13_BIT12, 0);
+	rt2x00_set_field32(&reg, MAC_CSR13_DIR4, 0);
+	rt2x00_set_field32(&reg, MAC_CSR13_VAL4, p1);
 
-	rt2x00_set_field32(&reg, MAC_CSR13_BIT3, !p2);
-	rt2x00_set_field32(&reg, MAC_CSR13_BIT11, 0);
+	rt2x00_set_field32(&reg, MAC_CSR13_DIR3, 0);
+	rt2x00_set_field32(&reg, MAC_CSR13_VAL3, !p2);
 
 	rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
 }
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index e3cd6db..9bc6b60 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -357,21 +357,22 @@ struct hw_pairwise_ta_entry {
 
 /*
  * MAC_CSR13: GPIO.
+ *	MAC_CSR13_VALx: GPIO value
+ *	MAC_CSR13_DIRx: GPIO direction: 0 = output; 1 = input
  */
 #define MAC_CSR13			0x3034
-#define MAC_CSR13_BIT0			FIELD32(0x00000001)
-#define MAC_CSR13_BIT1			FIELD32(0x00000002)
-#define MAC_CSR13_BIT2			FIELD32(0x00000004)
-#define MAC_CSR13_BIT3			FIELD32(0x00000008)
-#define MAC_CSR13_BIT4			FIELD32(0x00000010)
-#define MAC_CSR13_BIT5			FIELD32(0x00000020)
-#define MAC_CSR13_BIT6			FIELD32(0x00000040)
-#define MAC_CSR13_BIT7			FIELD32(0x00000080)
-#define MAC_CSR13_BIT8			FIELD32(0x00000100)
-#define MAC_CSR13_BIT9			FIELD32(0x00000200)
-#define MAC_CSR13_BIT10			FIELD32(0x00000400)
-#define MAC_CSR13_BIT11			FIELD32(0x00000800)
-#define MAC_CSR13_BIT12			FIELD32(0x00001000)
+#define MAC_CSR13_VAL0			FIELD32(0x00000001)
+#define MAC_CSR13_VAL1			FIELD32(0x00000002)
+#define MAC_CSR13_VAL2			FIELD32(0x00000004)
+#define MAC_CSR13_VAL3			FIELD32(0x00000008)
+#define MAC_CSR13_VAL4			FIELD32(0x00000010)
+#define MAC_CSR13_VAL5			FIELD32(0x00000020)
+#define MAC_CSR13_DIR0			FIELD32(0x00000100)
+#define MAC_CSR13_DIR1			FIELD32(0x00000200)
+#define MAC_CSR13_DIR2			FIELD32(0x00000400)
+#define MAC_CSR13_DIR3			FIELD32(0x00000800)
+#define MAC_CSR13_DIR4			FIELD32(0x00001000)
+#define MAC_CSR13_DIR5			FIELD32(0x00002000)
 
 /*
  * MAC_CSR14: LED control register.
-- 
1.7.11.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html