Search Linux Wireless

[PATCH v2] mwifiex: use is_broadcast_ether_addr() instead of memcmp()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wei Yongjun <yongjun_wei@xxxxxxxxxxxxxxxxx>

Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.

Signed-off-by: Wei Yongjun <yongjun_wei@xxxxxxxxxxxxxxxxx>
---
 drivers/net/wireless/mwifiex/sta_cmd.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index df3a33c..323b91b 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -551,7 +551,6 @@ mwifiex_cmd_802_11_key_material(struct mwifiex_private *priv,
 	struct host_cmd_tlv_mac_addr *tlv_mac;
 	u16 key_param_len = 0, cmd_size;
 	int ret = 0;
-	const u8 bc_mac[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 
 	cmd->command = cpu_to_le16(HostCmd_CMD_802_11_KEY_MATERIAL);
 	key_material->action = cpu_to_le16(cmd_action);
@@ -593,7 +592,7 @@ mwifiex_cmd_802_11_key_material(struct mwifiex_private *priv,
 			/* set 0 when re-key */
 			key_material->key_param_set.key[1] = 0;
 
-		if (0 != memcmp(enc_key->mac_addr, bc_mac, sizeof(bc_mac))) {
+		if (!is_broadcast_ether_addr(enc_key->mac_addr)) {
 			/* WAPI pairwise key: unicast */
 			key_material->key_param_set.key_info |=
 				cpu_to_le16(KEY_UNICAST);


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux