This patch reduces the per rate target power eeprom reads for AR5K_EEPROM_MODE_11A from 10 to 8, as there are only 8 valid power curve entries on the eeprom. The former 10 reads lead to equal max power limits per rate and this causes an increasing distortion for all rates above 24 MBit and leads to a needless poor performance in 802.11a mode. Signed-off-by: Thomas Huehn <thomas@xxxxxxxxxxxxxxxxxxxxxxx> --- madwifi cross validation check. Thx to Felix Fiethkau reworked former patch series. Thx to Nick Kossifidis --- drivers/net/wireless/ath/ath5k/eeprom.c | 2 +- drivers/net/wireless/ath/ath5k/eeprom.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 4026c90..b7e0258 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -1482,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) case AR5K_EEPROM_MODE_11A: offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); rate_pcal_info = ee->ee_rate_tpwr_a; - ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; break; case AR5K_EEPROM_MODE_11B: offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index dc2bcfe..94a9bbe 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -182,6 +182,7 @@ #define AR5K_EEPROM_EEP_DELTA 10 #define AR5K_EEPROM_N_MODES 3 #define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 #define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 -- 1.7.11.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
