Hi devs,
The following card does not work (remains always 'hard blocked'):
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313
802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
There is no a physical lock on the notebook in question.
I know windows can change only by software.
When i do this, wireless net (and bluetooth) works fine on linux.
Ok, install windows, unblock... But, why linux can't do this?
I have trying a lot of tips about rfkill (unblock all, ...) but
nothing, remains hard blocked.
Also i tried, unsuccessfully, map Fn + F12 keys...
Someone have an idea?
Hardware information in attachment.
Thanks in advance.
Best regards.
--
Arliton Rocha
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 4159 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 7 Region 0: Memory at c0604000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at c060a000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at c0600000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 4179 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: COMPAL Electronics Inc Device 0056 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: c0500000-c05fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #1, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: COMPAL Electronics Inc Device 0056 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at c0609000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 309c [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3098 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at c0608000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 4169 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at c0606000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3040 [size=32] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: COMPAL Electronics Inc Device 0056 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 4151 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Unknown small resource type 00, will not decode more. Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00 Kernel driver in use: r8169 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Broadcom Corporation Device 051a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at c0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME- Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us ClockPM+ Surprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-b5-ff-ff-bb-7c-4f Capabilities: [16c v1] Power Budgeting <?> Kernel driver in use: brcmsmac
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-3-686-pae (Debian 3.2.23-1) (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 03:50:34 UTC 2012 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000ace3f000 (usable) [ 0.000000] BIOS-e820: 00000000ace3f000 - 00000000acebf000 (reserved) [ 0.000000] BIOS-e820: 00000000acebf000 - 00000000acfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000acfbf000 - 00000000acfff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000acfff000 - 00000000ad000000 (usable) [ 0.000000] BIOS-e820: 00000000ad000000 - 00000000afa00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000014fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: Compal PBL0001/Base Board Product Name, BIOS 1.70 3/25/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x14fe00 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0AD000000 mask FFF000000 uncachable [ 0.000000] 3 base 0AE000000 mask FFE000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask FC0000000 write-back [ 0.000000] 7 base 140000000 mask FF0000000 write-back [ 0.000000] 8 base 14FE00000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fe1b0] fe1b0 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 36f95000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 35f3a000 - 36f941d1 [ 0.000000] Move RAMDISK from 0000000036f95000 - 0000000037fef1d0 to 35f3a000 - 36f941d0 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 INSYDE) [ 0.000000] ACPI: XSDT acffe120 00084 (v01 INSYDE HR CRB 00000001 01000013) [ 0.000000] ACPI: FACP acffc000 000F4 (v04 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT acff0000 08C80 (v01 INSYDE HR CRB 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS acf4e000 00040 [ 0.000000] ACPI: ASF! acffd000 000A5 (v32 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET acffb000 00038 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC acffa000 0008C (v02 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG acff9000 0003C (v01 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: SLIC acfef000 00176 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: WDAT acfee000 00224 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT acfed000 006FE (v01 INSYDE HR CRB 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT acfeb000 00028 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT acfe8000 00034 (v07 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT acfe7000 0090C (v01 INSYDE HR CRB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT acfe6000 00996 (v01 INSYDE HR CRB 00003000 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4484MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0014fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000ace3f [ 0.000000] 0: 0x000acfff -> 0x000ad000 [ 0.000000] 0: 0x00100000 -> 0x0014fe00 [ 0.000000] On node 0 totalpages: 1035213 [ 0.000000] free_area_init_node: node 0, pgdat c140d680, node_mem_map f353a200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8969 pages used for memmap [ 0.000000] HighMem zone: 798521 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:30600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f797b000 s33280 r0 d24064 u57344 [ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1024464 [ 0.000000] Kernel command line: root=/dev/sda2 ro nomodeset vga=791 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Initializing HighMem for node 0 (000379fe:0014fe00) [ 0.000000] Memory: 4074564k/5502976k available (2836k kernel code, 66288k reserved, 1343k data, 412k init, 3229960k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc1415000 - 0xc147c000 ( 412 kB) [ 0.000000] .data : 0xc12c51ec - 0xc1414f40 (1343 kB) [ 0.000000] .text : 0xc1000000 - 0xc12c51ec (2836 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16 [ 0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2095.662 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.32 BogoMIPS (lpj=8382648) [ 0.000009] pid_max: default: 32768 minimum: 301 [ 0.000035] Security Framework initialized [ 0.000041] AppArmor: AppArmor disabled by boot time parameter [ 0.000055] Mount-cache hash table entries: 512 [ 0.000150] Initializing cgroup subsys cpuacct [ 0.000158] Initializing cgroup subsys memory [ 0.000166] Initializing cgroup subsys devices [ 0.000169] Initializing cgroup subsys freezer [ 0.000172] Initializing cgroup subsys net_cls [ 0.000176] Initializing cgroup subsys blkio [ 0.000181] Initializing cgroup subsys perf_event [ 0.000208] CPU: Physical Processor ID: 0 [ 0.000211] CPU: Processor Core ID: 0 [ 0.000217] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000218] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000224] mce: CPU supports 7 MCE banks [ 0.000235] CPU0: Thermal monitoring handled by SMI [ 0.000243] using mwait in idle threads. [ 0.000714] ACPI: Core revision 20110623 [ 0.019669] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020090] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.059726] CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07 [ 0.166975] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.166983] PEBS disabled due to CPU errata. [ 0.166987] ... version: 3 [ 0.166990] ... bit width: 48 [ 0.166992] ... generic registers: 4 [ 0.166995] ... value mask: 0000ffffffffffff [ 0.166998] ... max period: 000000007fffffff [ 0.167001] ... fixed-purpose events: 3 [ 0.167004] ... event mask: 000000070000000f [ 0.167159] NMI watchdog enabled, takes one hw-pmu counter. [ 0.167244] CPU 1 irqstacks, hard=f7514000 soft=f7516000 [ 0.167246] Booting Node 0, Processors #1 [ 0.167250] smpboot cpu 1: start_ip = 99000 [ 0.177569] Initializing CPU#1 [ 0.254862] CPU1: Thermal monitoring handled by SMI [ 0.274938] NMI watchdog enabled, takes one hw-pmu counter. [ 0.275036] CPU 2 irqstacks, hard=f7544000 soft=f7546000 [ 0.275038] #2 [ 0.275040] smpboot cpu 2: start_ip = 99000 [ 0.285311] Initializing CPU#2 [ 0.362695] CPU2: Thermal monitoring handled by SMI [ 0.382801] NMI watchdog enabled, takes one hw-pmu counter. [ 0.382888] CPU 3 irqstacks, hard=f7556000 soft=f7558000 [ 0.382890] #3 [ 0.382891] smpboot cpu 3: start_ip = 99000 [ 0.393162] Initializing CPU#3 [ 0.470527] CPU3: Thermal monitoring handled by SMI [ 0.490553] NMI watchdog enabled, takes one hw-pmu counter. [ 0.490581] Brought up 4 CPUs [ 0.490584] Total of 4 processors activated (16762.18 BogoMIPS). [ 0.494448] devtmpfs: initialized [ 0.494610] PM: Registering ACPI NVS region at acebf000 (1048576 bytes) [ 0.494776] print_constraints: dummy: [ 0.494829] NET: Registered protocol family 16 [ 0.494909] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.494914] ACPI: bus type pci registered [ 0.494985] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.494992] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.494996] PCI: Using MMCONFIG for extended config space [ 0.494999] PCI: Using configuration type 1 for base access [ 0.495616] bio: create slab <bio-0> at 0 [ 0.495694] ACPI: Added _OSI(Module Device) [ 0.495697] ACPI: Added _OSI(Processor Device) [ 0.495701] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.495704] ACPI: Added _OSI(Processor Aggregator Device) [ 0.497122] ACPI: EC: Look up EC in DSDT [ 0.498480] ACPI: Executed 1 blocks of module-level executable AML code [ 0.502433] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.502883] ACPI: SSDT ace70718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.503248] ACPI: Dynamic OEM Table Load: [ 0.503252] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.514813] ACPI: SSDT ace71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.515212] ACPI: Dynamic OEM Table Load: [ 0.515216] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.526632] ACPI: SSDT ace6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.526986] ACPI: Dynamic OEM Table Load: [ 0.526989] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.539217] ACPI: Interpreter enabled [ 0.539225] ACPI: (supports S0 S3 S4 S5) [ 0.539250] ACPI: Using IOAPIC for interrupt routing [ 0.660567] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.660915] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.661983] ACPI: Power Resource [FN00] (off) [ 0.662070] ACPI: Power Resource [FN01] (off) [ 0.662440] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.662607] ACPI: No dock devices found. [ 0.662610] HEST: Table not found. [ 0.662615] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.662966] \_SB_.PCI0:_OSC invalid UUID [ 0.662967] _OSC request data:1 8 1f [ 0.662971] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.663565] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.663570] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.663574] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.663580] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff] [ 0.663595] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.663634] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300 [ 0.663646] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.663653] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.663658] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.663734] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.663769] pci 0000:00:16.0: reg 10: [mem 0xc0604000-0xc060400f 64bit] [ 0.663886] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.663892] pci 0000:00:16.0: PME# disabled [ 0.663942] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.664324] pci 0000:00:1a.0: reg 10: [mem 0xc060a000-0xc060a3ff] [ 0.666492] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.666498] pci 0000:00:1a.0: PME# disabled [ 0.666537] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.666563] pci 0000:00:1b.0: reg 10: [mem 0xc0600000-0xc0603fff 64bit] [ 0.666687] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.666693] pci 0000:00:1b.0: PME# disabled [ 0.666727] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.666858] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.666864] pci 0000:00:1c.0: PME# disabled [ 0.666900] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.667031] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.667036] pci 0000:00:1c.1: PME# disabled [ 0.667087] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.667457] pci 0000:00:1d.0: reg 10: [mem 0xc0609000-0xc06093ff] [ 0.669623] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.669628] pci 0000:00:1d.0: PME# disabled [ 0.669661] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601 [ 0.669842] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.669877] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f] [ 0.669891] pci 0000:00:1f.2: reg 14: [io 0x309c-0x309f] [ 0.669904] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087] [ 0.669918] pci 0000:00:1f.2: reg 1c: [io 0x3098-0x309b] [ 0.669931] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f] [ 0.669945] pci 0000:00:1f.2: reg 24: [mem 0xc0608000-0xc06087ff] [ 0.670033] pci 0000:00:1f.2: PME# supported from D3hot [ 0.670038] pci 0000:00:1f.2: PME# disabled [ 0.670066] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.670092] pci 0000:00:1f.3: reg 10: [mem 0xc0606000-0xc06060ff 64bit] [ 0.670130] pci 0000:00:1f.3: reg 20: [io 0x3040-0x305f] [ 0.670334] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200 [ 0.670407] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff] [ 0.670537] pci 0000:01:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.670617] pci 0000:01:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.670975] pci 0000:01:00.0: supports D1 D2 [ 0.670976] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.670992] pci 0000:01:00.0: PME# disabled [ 0.678244] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.678259] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.678279] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.678470] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280 [ 0.678526] pci 0000:02:00.0: reg 10: [mem 0xc0500000-0xc0503fff 64bit] [ 0.678832] pci 0000:02:00.0: supports D1 D2 [ 0.678834] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.678844] pci 0000:02:00.0: PME# disabled [ 0.686243] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.686263] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.686301] pci_bus 0000:00: on NUMA node 0 [ 0.686309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.686524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.686561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.686662] \_SB_.PCI0:_OSC invalid UUID [ 0.686663] _OSC request data:1 1f 1f [ 0.686667] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.686704] \_SB_.PCI0:_OSC invalid UUID [ 0.686705] _OSC request data:1 0 1d [ 0.686709] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.686713] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.689449] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.689504] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.689555] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.689607] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.689657] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.689709] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.689760] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.689811] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.689907] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.689917] vgaarb: loaded [ 0.689919] vgaarb: bridge control possible 0000:00:02.0 [ 0.689951] PCI: Using ACPI for IRQ routing [ 0.703420] PCI: pci_cache_line_size set to 64 bytes [ 0.703517] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.703520] reserve RAM buffer: 00000000ace3f000 - 00000000afffffff [ 0.703523] reserve RAM buffer: 00000000ad000000 - 00000000afffffff [ 0.703526] reserve RAM buffer: 000000014fe00000 - 000000014fffffff [ 0.703630] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.703638] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.705652] Switching to clocksource hpet [ 0.707136] pnp: PnP ACPI init [ 0.707151] ACPI: bus type pnp registered [ 0.707456] pnp 00:00: [bus 00-fe] [ 0.707458] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.707460] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.707462] pnp 00:00: [io 0x0d00-0xffff window] [ 0.707464] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.707466] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.707468] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.707470] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.707472] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.707474] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.707476] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.707479] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.707481] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.707483] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.707485] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.707487] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.707489] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.707491] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.707493] pnp 00:00: [mem 0xafa00000-0xfeafffff window] [ 0.707540] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.707553] pnp 00:01: [io 0x0000-0x001f] [ 0.707555] pnp 00:01: [io 0x0081-0x0091] [ 0.707557] pnp 00:01: [io 0x0093-0x009f] [ 0.707558] pnp 00:01: [io 0x00c0-0x00df] [ 0.707560] pnp 00:01: [dma 4] [ 0.707583] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.707592] pnp 00:02: [mem 0xff000000-0xffffffff] [ 0.707612] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.707680] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.707702] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.707712] pnp 00:04: [io 0x00f0] [ 0.707719] pnp 00:04: [irq 13] [ 0.707741] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.707751] pnp 00:05: [io 0x002e-0x002f] [ 0.707753] pnp 00:05: [io 0x004e-0x004f] [ 0.707755] pnp 00:05: [io 0x0061] [ 0.707756] pnp 00:05: [io 0x0063] [ 0.707758] pnp 00:05: [io 0x0065] [ 0.707759] pnp 00:05: [io 0x0067] [ 0.707761] pnp 00:05: [io 0x0070] [ 0.707762] pnp 00:05: [io 0x0080] [ 0.707764] pnp 00:05: [io 0x0092] [ 0.707765] pnp 00:05: [io 0x00b2-0x00b3] [ 0.707767] pnp 00:05: [io 0x0680-0x069f] [ 0.707769] pnp 00:05: [io 0x1000-0x100f] [ 0.707770] pnp 00:05: [io 0x1010-0x1013] [ 0.707772] pnp 00:05: [io 0xffff] [ 0.707774] pnp 00:05: [io 0x0400-0x0453] [ 0.707775] pnp 00:05: [io 0x0458-0x047f] [ 0.707777] pnp 00:05: [io 0x0500-0x057f] [ 0.707779] pnp 00:05: [io 0x164e-0x164f] [ 0.707816] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.707821] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.707825] system 00:05: [io 0x1010-0x1013] has been reserved [ 0.707829] system 00:05: [io 0xffff] has been reserved [ 0.707833] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.707837] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.707841] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.707845] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.707849] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.707857] pnp 00:06: [io 0x0070-0x0077] [ 0.707862] pnp 00:06: [irq 8] [ 0.707885] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.707904] pnp 00:07: [io 0x0454-0x0457] [ 0.707936] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.707940] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.769604] pnp 00:08: [io 0x0060] [ 0.769609] pnp 00:08: [io 0x0064] [ 0.769619] pnp 00:08: [irq 1] [ 0.769689] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.769720] pnp 00:09: [irq 12] [ 0.769748] pnp 00:09: Plug and Play ACPI device, IDs FFFffff SYN0700 SYN0002 PNP0f13 (active) [ 0.769851] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 0.769853] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 0.769855] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 0.769857] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 0.769859] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.769861] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 0.769862] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 0.769865] pnp 00:0a: [mem 0xff000000-0xffffffff] [ 0.769867] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 0.769869] pnp 00:0a: [mem 0xafa00000-0xafa00fff] [ 0.769907] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.769912] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.769916] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.769920] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.769925] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.769929] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.769933] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.769938] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 0.769942] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.769947] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.769951] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.770149] pnp 00:0b: [mem 0x20000000-0x201fffff] [ 0.770150] pnp 00:0b: [mem 0x40000000-0x401fffff] [ 0.770201] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved [ 0.770206] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved [ 0.770210] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.770233] pnp: PnP ACPI: found 12 devices [ 0.770236] ACPI: ACPI bus type pnp unregistered [ 0.770240] PnPBIOS: Disabled by ACPI PNP [ 0.806965] PCI: max bus depth: 1 pci_try_num: 2 [ 0.806993] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.807000] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.807013] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.807025] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.807033] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.807059] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.807067] pci 0000:00:1c.0: setting latency timer to 64 [ 0.807078] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.807085] pci 0000:00:1c.1: setting latency timer to 64 [ 0.807090] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.807092] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.807094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.807096] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff] [ 0.807098] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.807100] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.807103] pci_bus 0000:02: resource 1 [mem 0xc0500000-0xc05fffff] [ 0.807161] NET: Registered protocol family 2 [ 0.807217] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.807382] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.807626] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.807737] TCP: Hash tables configured (established 131072 bind 65536) [ 0.807742] TCP reno registered [ 0.807746] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.807753] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.807839] NET: Registered protocol family 1 [ 0.807851] pci 0000:00:02.0: Boot video device [ 0.807863] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.821507] pci 0000:00:1a.0: PCI INT A disabled [ 0.821557] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.837471] pci 0000:00:1d.0: PCI INT A disabled [ 0.837543] PCI: CLS 64 bytes, default 64 [ 0.837623] Unpacking initramfs... [ 1.277627] Freeing initrd memory: 16748k freed [ 1.279920] Simple Boot Flag at 0x44 set to 0x1 [ 1.280389] audit: initializing netlink socket (disabled) [ 1.280400] type=2000 audit(1344008733.108:1): initialized [ 1.300045] highmem bounce pool size: 64 pages [ 1.300053] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.307449] VFS: Disk quotas dquot_6.5.2 [ 1.307484] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.307551] msgmni has been set to 1682 [ 1.307697] alg: No test for stdrng (krng) [ 1.307728] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.307734] io scheduler noop registered [ 1.307736] io scheduler deadline registered [ 1.307755] io scheduler cfq registered (default) [ 1.307973] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.307999] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.308003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.308271] vesafb: mode is 1024x768x16, linelength=2048, pages=20 [ 1.308275] vesafb: scrolling: redraw [ 1.308279] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.308551] vesafb: framebuffer at 0xb0000000, mapped to 0xf8280000, using 3072k, total 32704k [ 1.338983] Console: switching to colour frame buffer device 128x48 [ 1.369684] fb0: VESA VGA frame buffer device [ 1.369948] intel_idle: MWAIT substates: 0x21120 [ 1.369950] intel_idle: v0.4 model 0x2A [ 1.369952] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.369982] ERST: Table is not found! [ 1.370192] GHES: HEST is not enabled! [ 1.370418] isapnp: Scanning for PnP cards... [ 1.680836] isapnp: No Plug & Play device found [ 1.681149] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.684669] Linux agpgart interface v0.103 [ 1.684996] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.685392] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.686820] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.687302] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 [ 1.687824] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.728000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.728294] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.728698] mousedev: PS/2 mouse device common for all mice [ 1.730779] rtc_cmos 00:06: RTC can wake from S4 [ 1.731175] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.731558] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.732028] cpuidle: using governor ladder [ 1.732379] cpuidle: using governor menu [ 1.732767] TCP cubic registered [ 1.733045] NET: Registered protocol family 10 [ 1.733767] Mobile IPv6 [ 1.745202] NET: Registered protocol family 17 [ 1.756750] Registering the dns_resolver key type [ 1.768331] Using IPI No-Shortcut mode [ 1.779942] PM: Hibernation image not present or could not be loaded. [ 1.779951] registered taskstats version 1 [ 1.795483] rtc_cmos 00:06: setting system clock to 2012-08-03 15:45:34 UTC (1344008734) [ 1.807315] Initializing network drop monitor service [ 1.819141] Freeing unused kernel memory: 412k freed [ 1.830954] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.843073] Write protecting the kernel text: 2840k [ 1.855091] Write protecting the kernel read-only data: 1088k [ 1.867062] NX-protecting the kernel data: 3304k [ 1.906240] udevd[56]: starting version 175 [ 1.930778] [drm] Initialized drm 1.1.0 20060810 [ 1.945791] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.962320] SCSI subsystem initialized [ 1.974582] ACPI: Fan [FAN0] (off) [ 1.989488] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.002073] ACPI: Fan [FAN1] (off) [ 2.002721] usbcore: registered new interface driver usbfs [ 2.002744] usbcore: registered new interface driver hub [ 2.015732] ACPI: Lid Switch [LID0] [ 2.015808] input: Sleep Button as /devices/LNXSYSTM:00/PNP0C0E:00/input/input2 [ 2.015812] ACPI: Sleep Button [SLPB] [ 2.015864] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.015867] ACPI: Power Button [PWRF] [ 2.099537] usbcore: registered new device driver usb [ 2.108294] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.108360] r8169 0000:01:00.0: setting latency timer to 64 [ 2.108588] r8169 0000:01:00.0: irq 40 for MSI/MSI-X [ 2.109052] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xf8250000, b8:70:f4:b1:de:9f, XID 0c200000 IRQ 40 [ 2.109056] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.151129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.164973] libata version 3.00 loaded. [ 2.166823] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.179710] ACPI: Thermal Zone [TZ00] (0 C) [ 2.192529] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.205565] i915 0000:00:02.0: setting latency timer to 64 [ 2.205821] checking generic (b0000000 1ff0000) vs hw (b0000000 10000000) [ 2.205824] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 2.219078] Console: switching to colour dummy device 80x25 [ 2.230969] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining [ 2.230975] [drm] MTRR allocation failed. Graphics performance may suffer. [ 2.231246] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 2.231250] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.231254] [drm] Driver supports precise vblank timestamp query. [ 2.231282] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.275322] Refined TSC clocksource calibration: 2095.240 MHz. [ 2.275330] Switching to clocksource tsc [ 2.819019] fbcon: inteldrmfb (fb0) is primary device [ 3.018271] Console: switching to colour frame buffer device 170x48 [ 3.022295] fb0: inteldrmfb frame buffer device [ 3.022297] drm: registered panic notifier [ 3.022308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 3.027038] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 3.030620] acpi device:37: registered as cooling_device2 [ 3.030911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4 [ 3.030971] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.031043] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.031259] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.031346] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.031351] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 3.031425] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.031500] ehci_hcd 0000:00:1a.0: debug port 2 [ 3.035406] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 3.035631] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc060a000 [ 3.050192] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.050345] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.050388] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.050433] usb usb1: Product: EHCI Host Controller [ 3.050464] usb usb1: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd [ 3.050501] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.050646] hub 1-0:1.0: USB hub found [ 3.050675] hub 1-0:1.0: 2 ports detected [ 3.050766] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.050828] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.050832] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 3.052268] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.053721] ehci_hcd 0000:00:1d.0: debug port 2 [ 3.059020] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 3.059035] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc0609000 [ 3.074153] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.075664] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.077058] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.078463] usb usb2: Product: EHCI Host Controller [ 3.079853] usb usb2: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd [ 3.081238] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.082727] hub 2-0:1.0: USB hub found [ 3.084089] hub 2-0:1.0: 2 ports detected [ 3.085491] ahci 0000:00:1f.2: version 3.0 [ 3.085580] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.087092] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 3.087132] ahci: SSS flag set, parallel bus scan disabled [ 3.102151] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode [ 3.103587] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 3.104970] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.110693] scsi0 : ahci [ 3.112206] scsi1 : ahci [ 3.113625] scsi2 : ahci [ 3.115009] scsi3 : ahci [ 3.116345] scsi4 : ahci [ 3.117647] scsi5 : ahci [ 3.118965] ata1: SATA max UDMA/133 abar m2048@0xc0608000 port 0xc0608100 irq 42 [ 3.120210] ata2: DUMMY [ 3.121437] ata3: DUMMY [ 3.122641] ata4: DUMMY [ 3.123821] ata5: SATA max UDMA/133 abar m2048@0xc0608000 port 0xc0608300 irq 42 [ 3.125037] ata6: DUMMY [ 3.361738] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 3.445625] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.494083] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.495407] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.496882] hub 1-1:1.0: USB hub found [ 3.498457] hub 1-1:1.0: 6 ports detected [ 3.510426] ata1.00: ATA-8: WDC WD3200BPVT-00JJ5T0, 01.01A01, max UDMA/133 [ 3.511724] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.515643] ata1.00: configured for UDMA/133 [ 3.517138] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-0 01.0 PQ: 0 ANSI: 5 [ 3.609378] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 3.741716] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.743058] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.744513] hub 2-1:1.0: USB hub found [ 3.746084] hub 2-1:1.0: 6 ports detected [ 3.821258] usb 1-1.3: new high-speed USB device number 3 using ehci_hcd [ 3.837033] ata5: SATA link down (SStatus 0 SControl 300) [ 3.842255] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.843573] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.844888] sd 0:0:0:0: [sda] Write Protect is off [ 3.846169] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.846186] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.905139] sda: sda1 sda2 [ 3.906806] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.004678] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=58e8 [ 4.006132] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 4.007450] usb 1-1.3: Product: USB Camera [ 4.008771] usb 1-1.3: Manufacturer: LTD5L1MY [ 4.010064] usb 1-1.3: SerialNumber: 200901010001 [ 4.084866] usb 1-1.4: new high-speed USB device number 4 using ehci_hcd [ 4.193199] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0138 [ 4.194617] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.195941] usb 1-1.4: Product: USB2.0-CRW [ 4.197243] usb 1-1.4: Manufacturer: Generic [ 4.198529] usb 1-1.4: SerialNumber: 20090516388200000 [ 4.207320] usbcore: registered new interface driver uas [ 4.209348] Initializing USB Mass Storage driver... [ 4.210674] usbcore: registered new interface driver usb-storage [ 4.211980] USB Mass Storage support registered. [ 4.232632] scsi6 : usb-storage 1-1.4:1.0 [ 4.234009] usbcore: registered new interface driver ums-realtek [ 4.276580] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 4.292927] hub 1-1:1.0: unable to enumerate USB device on port 6 [ 4.294972] usb 1-1.4: USB disconnect, device number 4 [ 4.623283] kjournald starting. Commit interval 5 seconds [ 4.623357] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 4.623874] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd [ 4.719929] usb 2-1.1: New USB device found, idVendor=093a, idProduct=2510 [ 4.721408] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.722868] usb 2-1.1: Product: USB OPTICAL MOUSE [ 4.724317] usb 2-1.1: Manufacturer: PIXART [ 6.179419] udevd[323]: starting version 175 [ 6.797971] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.891426] iTCO_vendor_support: vendor-support=0 [ 6.936698] ACPI: Requesting acpi_cpufreq [ 6.942031] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 6.943612] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 6.945202] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.132416] ACPI: Battery Slot [BAT1] (battery present) [ 7.251949] ACPI: AC Adapter [ACAD] (on-line) [ 7.286006] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 7.287475] ACPI: resource 0000:00:1f.3 [io 0x3040-0x305f] conflicts with ACPI region SMBI [io 0x3040-0x304f] [ 7.289000] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.633698] cfg80211: Calling CRDA to update world regulatory domain [ 7.640719] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input6 [ 7.642412] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.1/input0 [ 7.644070] usbcore: registered new interface driver usbhid [ 7.645763] usbhid: USB HID core driver [ 7.681256] Linux media interface: v0.10 [ 7.853602] Linux video capture interface: v2.00 [ 7.907136] uvcvideo: Found UVC 1.00 device USB Camera (0bda:58e8) [ 7.916854] input: USB Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7 [ 7.918638] usbcore: registered new interface driver uvcvideo [ 7.920387] USB Video Class driver (1.1.1) [ 7.971505] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10 [ 7.974744] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.977999] brcmsmac 0000:02:00.0: setting latency timer to 64 [ 8.236600] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.239096] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 8.239142] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 8.303050] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.859912] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 8.988289] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 9.813728] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 9.921269] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.923122] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.925017] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 11.011671] EXT3-fs (sda2): using internal journal [ 11.115899] loop: module loaded [ 12.686023] RPC: Registered named UNIX socket transport module. [ 12.687571] RPC: Registered udp transport module. [ 12.689106] RPC: Registered tcp transport module. [ 12.690619] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.781867] FS-Cache: Loaded [ 12.808634] FS-Cache: Netfs 'nfs' registered for caching [ 12.824704] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 13.434870] r8169 0000:01:00.0: eth0: link down [ 13.438392] r8169 0000:01:00.0: eth0: link down [ 13.442233] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.707602] fuse init (API version 7.17) [ 15.005247] r8169 0000:01:00.0: eth0: link up [ 15.008038] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.625687] Bluetooth: Core ver 2.16 [ 18.628622] NET: Registered protocol family 31 [ 18.629945] Bluetooth: HCI device and connection manager initialized [ 18.631170] Bluetooth: HCI socket layer initialized [ 18.632378] Bluetooth: L2CAP socket layer initialized [ 18.633576] Bluetooth: SCO socket layer initialized [ 18.647948] Bluetooth: RFCOMM TTY layer initialized [ 18.649158] Bluetooth: RFCOMM socket layer initialized [ 18.650320] Bluetooth: RFCOMM ver 1.11 [ 18.705648] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.706846] Bluetooth: BNEP filters: protocol multicast [ 19.821217] lp: driver loaded but no devices found [ 19.848988] ppdev: user-space parallel port driver [ 25.408873] eth0: no IPv6 routers present [ 25.999236] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement) [ 25.999241] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement) [ 25.999245] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock [ 25.999247] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock [ 25.999249] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock [ 25.999251] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock [ 25.999254] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 25.999367] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 94.565717] atkbd serio0: Unknown key pressed (translated set 2, code 0x84 on isa0060/serio0). [ 94.565723] atkbd serio0: Use 'setkeycodes e004 <keycode>' to make it known. [ 94.576795] atkbd serio0: Unknown key released (translated set 2, code 0x84 on isa0060/serio0). [ 94.576801] atkbd serio0: Use 'setkeycodes e004 <keycode>' to make it known. [ 94.858117] atkbd serio0: Unknown key pressed (translated set 2, code 0x84 on isa0060/serio0). [ 94.858123] atkbd serio0: Use 'setkeycodes e004 <keycode>' to make it known. [ 94.870303] atkbd serio0: Unknown key released (translated set 2, code 0x84 on isa0060/serio0). [ 94.870308] atkbd serio0: Use 'setkeycodes e004 <keycode>' to make it known.
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux linux 3.2.0-3-686-pae #1 SMP Mon Jul 23 03:50:34 UTC 2012 i686 GNU/Linux Gnu C 4.6 Gnu make 3.81 binutils 2.22 util-linux 2.20.1 mount support module-init-tools 8 e2fsprogs 1.42 reiserfsprogs 3.6.21 PPP 2.4.5 Linux C Library 2.13 Dynamic linker (ldd) 2.13 Procps 3.2.8 Net-tools 1.60 Kbd 1.15.3 Sh-utils 8.13 wireless-tools 30 Modules Loaded sg cpufreq_userspace cpufreq_stats cpufreq_conservative cpufreq_powersave parport_pc ppdev lp parport bnep rfcomm bluetooth crc16 fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop snd_hda_codec_hdmi joydev snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss brcmsmac snd_pcm uvcvideo cordic snd_page_alloc crc8 videodev brcmutil snd_seq_dummy snd_seq_oss media snd_seq_midi mac80211 snd_seq_midi_event usbhid cfg80211 rfkill hid snd_rawmidi snd_seq snd_seq_device snd_timer snd psmouse serio_raw acpi_cpufreq mperf i2c_i801 soundcore iTCO_wdt processor ac battery iTCO_vendor_support coretemp evdev crc32c_intel pcspkr power_supply ext3 mbcache jbd ums_realtek usb_storage uas sd_mod crc_t10dif ahci i915 libahci i2c_algo_bit ehci_hcd libata drm_kms_helper usbcore thermal scsi_mod fan button video r8169 mii usb_common drm i2c_core thermal_sys
Distributor ID: Debian Description: Debian GNU/Linux testing/unstable Release: testing/unstable Codename: n/a
Attachment:
config-3.2.0-3-686-pae
Description: Binary data
ls /lib/firmware/brcm/ bcm4329-fullmac-4.bin bcm43xx-0.fw bcm43xx-0.fw-610.811 bcm43xx_hdr-0.fw bcm43xx_hdr-0.fw-610.811 brcmfmac43236b.bin brcmfmac4329.bin brcmfmac4330.bin brcmfmac4334.bin
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping : 7 microcode : 0x9 cpu MHz : 800.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid bogomips : 4191.32 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping : 7 microcode : 0x9 cpu MHz : 800.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid bogomips : 4190.27 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping : 7 microcode : 0x9 cpu MHz : 800.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 2 initial apicid : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid bogomips : 4190.28 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping : 7 microcode : 0x9 cpu MHz : 800.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 3 initial apicid : 3 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid bogomips : 4190.30 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:
# dmidecode 2.11 SMBIOS 2.7 present. 45 structures occupying 2199 bytes. Table at 0x000E68D0. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: INSYDE Version: 1.70 Release Date: 3/25/2010 ROM Size: 2560 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported Japanese floppy for NEC 9800 1.2 MB is supported (int 13h) Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) 8042 keyboard services are supported (int 9h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 70.240 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Compal Product Name: PBL0001 Version: 1.70 Serial Number: 123456789 UUID: 0E2F618D-BDB1-E011-8221-B870F4B1DE9F Wake-up Type: Power Switch SKU Number: HuronRiver_CRB Family: Intel_Mobile Handle 0x0002, DMI type 2, 16 bytes Base Board Information Manufacturer: Compal Product Name: Base Board Product Name Version: Base Board Version Serial Number: Base Board Serial Number Asset Tag: Base Board Asset Tag Features: Board is a hosting board Board is replaceable Location In Chassis: Base Board Chassis Location Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 23 bytes Chassis Information Manufacturer: Chassis Manufacturer Type: Notebook Lock: Not Present Version: Chassis Version Serial Number: Chassis Serial Number Asset Tag: Chassis Asset Tag Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 SKU Number: Not Specified Handle 0x0004, DMI type 9, 17 bytes System Slot Information Designation: J5C1 Type: x16 PCI Express x16 Current Usage: In Use Length: Long ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0005, DMI type 9, 17 bytes System Slot Information Designation: J6C1 Type: x4 PCI Express x4 Current Usage: In Use Length: Short ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0006, DMI type 9, 17 bytes System Slot Information Designation: J6C2 Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0007, DMI type 9, 17 bytes System Slot Information Designation: J6D2 Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0008, DMI type 9, 17 bytes System Slot Information Designation: J7C1 Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0009, DMI type 9, 17 bytes System Slot Information Designation: J7D2 Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x000A, DMI type 9, 17 bytes System Slot Information Designation: J8C2 Type: x16 PCI Express x16 Current Usage: In Use Length: Long ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x000B, DMI type 11, 5 bytes OEM Strings String 1: String1 for Original Equipment Manufacturer String 2: String2 for Original Equipment Manufacturer String 3: String3 for Original Equipment Manufacturer String 4: String4 for Original Equipment Manufacturer String 5: String5 for Original Equipment Manufacturer Handle 0x000C, DMI type 12, 5 bytes System Configuration Options Option 1: String1 for Type12 Equipment Manufacturer Handle 0x000D, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 4 en|US|iso8859-1 fr|CA|iso8859-1 ja|JP|unicode zh|TW|unicode Currently Installed Language: en|US|iso8859-1 Handle 0x000E, DMI type 21, 7 bytes Built-in Pointing Device Type: Touch Pad Interface: PS/2 Buttons: 4 Handle 0x000F, DMI type 26, 22 bytes Voltage Probe Description: Voltage Probe Description. Location: Unknown Status: Unknown Maximum Value: Unknown Minimum Value: Unknown Resolution: Unknown Tolerance: Unknown Accuracy: Unknown OEM-specific Information: 0x00000000 Nominal Value: Unknown Handle 0x0010, DMI type 27, 15 bytes Cooling Device Type: Fan Status: OK OEM-specific Information: 0x00000000 Nominal Speed: 2000 rpm Description: Cooling Device Description. Handle 0x0011, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x0012, DMI type 39, 22 bytes System Power Supply Location: OEM_Define0 Name: OEM_Define1 Manufacturer: OEM_Define2 Serial Number: OEM_Define3 Asset Tag: OEM_Define4 Model Part Number: OEM_Define5 Revision: OEM_Define6 Max Power Capacity: 75 W Status: Present, OK Type: Regulator Input Voltage Range Switching: Auto-switch Plugged: No Hot Replaceable: No Cooling Device Handle: 0x0010 Handle 0x0013, DMI type 40, 18 bytes Additional Information 1 Referenced Handle: 0x0004 Referenced Offset: 0x05 String: PCIExpressx16 Value: 0xaa Additional Information 2 Referenced Handle: 0x0000 Referenced Offset: 0x05 String: Compiler Version: VC 9.0 Value: 0x05dc Handle 0x0014, DMI type 41, 11 bytes Onboard Device Reference Designation: Hanksville Gbe Lan Connection Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:00.1 Handle 0x0015, DMI type 22, 26 bytes Portable Battery Location: Fake Manufacturer: -Virtual Battery 0- Manufacture Date: 10/12/2007 Serial Number: Battery 0 Name: CRB Battery 0 Chemistry: Lithium Ion Design Capacity: Unknown Design Voltage: Unknown SBDS Version: Not Specified Maximum Error: Unknown OEM-specific Information: 0x00000000 Handle 0x0016, DMI type 136, 6 bytes OEM-specific Type Header and Data: 88 06 16 00 5A 5A Handle 0x0017, DMI type 129, 8 bytes OEM-specific Type Header and Data: 81 08 17 00 01 01 02 01 Strings: Intel_ASF Intel_ASF_001 Handle 0x0018, DMI type 130, 20 bytes OEM-specific Type Header and Data: 82 14 18 00 24 41 4D 54 01 01 01 01 01 A5 1F 02 00 00 00 00 Handle 0x0019, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 16 GB Error Information Handle: No Error Number Of Devices: 2 Handle 0x001A, DMI type 17, 34 bytes Memory Device Array Handle: 0x0019 Error Information Handle: 0x001C Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: SODIMM Set: None Locator: ChannelA-DIMM0 Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Not Specified Serial Number: 00000000 Asset Tag: 0123456789 Part Number: H6451U64F9333G Rank: Unknown Configured Clock Speed: 1333 MHz Handle 0x001B, DMI type 6, 12 bytes Memory Module Information Socket Designation: ChannelA-DIMM0 Bank Connections: None Current Speed: Unknown Type: DIMM Installed Size: 4096 MB (Single-bank Connection) Enabled Size: 4096 MB (Single-bank Connection) Error Status: OK Handle 0x001C, DMI type 18, 23 bytes 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x001D, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Device Handle: 0x001A Memory Array Mapped Address Handle: 0x0025 Partition Row Position: Unknown Interleave Position: 1 Interleaved Data Depth: 2 Handle 0x001E, DMI type 17, 34 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: ChannelA-DIMM1 Bank Locator: BANK 1 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: 0123456789 Part Number: Not Specified Rank: Unknown Configured Clock Speed: Unknown Handle 0x001F, DMI type 6, 12 bytes Memory Module Information Socket Designation: ChannelA-DIMM1 Bank Connections: None Current Speed: Unknown Type: DIMM Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0020, DMI type 17, 34 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: ChannelB-DIMM0 Bank Locator: BANK 2 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: 0123456789 Part Number: Not Specified Rank: Unknown Configured Clock Speed: Unknown Handle 0x0021, DMI type 6, 12 bytes Memory Module Information Socket Designation: ChannelB-DIMM0 Bank Connections: None Current Speed: Unknown Type: DIMM Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0022, DMI type 17, 34 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: ChannelB-DIMM1 Bank Locator: BANK 3 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: 0123456789 Part Number: Not Specified Rank: Unknown Configured Clock Speed: Unknown Handle 0x0023, DMI type 6, 12 bytes Memory Module Information Socket Designation: ChannelB-DIMM1 Bank Connections: None Current Speed: Unknown Type: DIMM Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0024, DMI type 18, 23 bytes 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x0025, DMI type 19, 31 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Array Handle: 0x0019 Partition Width: 2 Handle 0x0026, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 8192 MB Maximum Total Memory Size: 16384 MB Supported Speeds: Other Supported Memory Types: Other Memory Module Voltage: Unknown Associated Memory Slots: 2 0x001B 0x0021 Enabled Error Correcting Capabilities: None Handle 0x0027, DMI type 4, 42 bytes Processor Information Socket Designation: CPU1 Type: Central Processor Family: Core i3 Manufacturer: Intel(R) Corporation ID: A7 06 02 00 FF FB EB BF Signature: Type 0, Family 6, Model 42, Stepping 7 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz Voltage: 0.0 V External Clock: 1333 MHz Max Speed: 4000 MHz Current Speed: 2100 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0029 L2 Cache Handle: 0x002A L3 Cache Handle: 0x002B Serial Number: Not Specified Asset Tag: FFFF Part Number: Not Specified Core Count: 2 Core Enabled: 2 Thread Count: 4 Characteristics: 64-bit capable Handle 0x0028, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Through Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x0029, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Through Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Instruction Associativity: 8-way Set-associative Handle 0x002A, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Through Location: Internal Installed Size: 256 kB Maximum Size: 256 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x002B, DMI type 7, 19 bytes Cache Information Socket Designation: L3 Cache Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Write Through Location: Internal Installed Size: 3072 kB Maximum Size: 3072 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 12-way Set-associative Handle 0x002C, DMI type 127, 4 bytes End Of Table
SIOCSIFFLAGS: Operation not possible due to RF-kill
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0062-0062 : EC data
0064-0064 : keyboard
0066-0066 : EC cmd
0070-0077 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
03c0-03df : vesafb
0400-0453 : pnp 00:05
0400-0403 : ACPI PM1a_EVT_BLK
0404-0405 : ACPI PM1a_CNT_BLK
0408-040b : ACPI PM_TMR
0410-0415 : ACPI CPU throttle
0420-042f : ACPI GPE0_BLK
0430-0433 : iTCO_wdt
0450-0450 : ACPI PM2_CNT_BLK
0454-0457 : pnp 00:07
0458-047f : pnp 00:05
0460-047f : iTCO_wdt
0500-057f : pnp 00:05
0680-069f : pnp 00:05
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
1000-100f : pnp 00:05
1010-1013 : pnp 00:05
164e-164f : pnp 00:05
2000-2fff : PCI Bus 0000:01
2000-20ff : 0000:01:00.0
2000-20ff : r8169
3000-303f : 0000:00:02.0
3040-305f : 0000:00:1f.3
3060-307f : 0000:00:1f.2
3060-307f : ahci
3080-3087 : 0000:00:1f.2
3080-3087 : ahci
3088-308f : 0000:00:1f.2
3088-308f : ahci
3098-309b : 0000:00:1f.2
3098-309b : ahci
309c-309f : 0000:00:1f.2
309c-309f : ahci
ffff-ffff : pnp 00:05
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 06
serial: b8:70:f4:b1:de:9f
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.184 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:40 ioport:2000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff
*-network DISABLED
description: Wireless interface
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlan0
version: 01
serial: 7c:4f:b5:bb:c1:94
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=brcmsmac driverversion=3.2.0-3-686-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
resources: irq:17 memory:c0500000-c0503fff
Module Size Used by sg 21476 0 cpufreq_userspace 12520 0 cpufreq_stats 12762 0 cpufreq_conservative 12987 0 cpufreq_powersave 12422 0 parport_pc 22036 0 ppdev 12651 0 lp 12797 0 parport 31254 3 lp,ppdev,parport_pc bnep 17288 2 rfcomm 28590 4 bluetooth 103750 10 rfcomm,bnep crc16 12327 1 bluetooth fuse 52153 1 nfsd 173714 2 nfs 265779 0 nfs_acl 12463 2 nfs,nfsd auth_rpcgss 32143 2 nfs,nfsd fscache 31978 1 nfs lockd 57255 2 nfs,nfsd sunrpc 143853 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd loop 17810 0 snd_hda_codec_hdmi 26511 1 joydev 17010 0 snd_hda_codec_realtek 45892 1 arc4 12418 2 snd_hda_intel 21853 3 snd_hda_codec 72775 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi snd_hwdep 12943 1 snd_hda_codec snd_pcm_oss 36181 0 snd_mixer_oss 17668 1 snd_pcm_oss brcmsmac 447838 0 snd_pcm 53497 4 snd_pcm_oss,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi uvcvideo 56896 0 cordic 12305 1 brcmsmac snd_page_alloc 12867 2 snd_pcm,snd_hda_intel crc8 12394 1 brcmsmac videodev 61658 1 uvcvideo brcmutil 12785 1 brcmsmac snd_seq_dummy 12455 0 snd_seq_oss 28489 0 media 13692 2 videodev,uvcvideo snd_seq_midi 12744 0 mac80211 171359 1 brcmsmac snd_seq_midi_event 13124 2 snd_seq_midi,snd_seq_oss usbhid 31523 0 cfg80211 117454 2 mac80211,brcmsmac rfkill 18516 4 cfg80211,bluetooth hid 60120 1 usbhid snd_rawmidi 22472 1 snd_seq_midi snd_seq 39487 6 snd_seq_midi_event,snd_seq_midi,snd_seq_oss,snd_seq_dummy snd_seq_device 13016 5 snd_seq,snd_rawmidi,snd_seq_midi,snd_seq_oss,snd_seq_dummy snd_timer 22356 2 snd_seq,snd_pcm snd 43038 21 snd_timer,snd_seq_device,snd_seq,snd_rawmidi,snd_seq_midi,snd_seq_oss,snd_seq_dummy,snd_pcm,snd_mixer_oss,snd_pcm_oss,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi psmouse 54927 0 serio_raw 12803 0 acpi_cpufreq 12807 1 mperf 12421 1 acpi_cpufreq i2c_i801 12670 0 soundcore 12921 1 snd iTCO_wdt 16945 0 processor 27565 1 acpi_cpufreq ac 12552 0 battery 12957 0 iTCO_vendor_support 12632 1 iTCO_wdt coretemp 12770 0 evdev 17225 13 crc32c_intel 12659 0 pcspkr 12515 0 power_supply 13283 2 battery,ac ext3 138190 1 mbcache 12897 1 ext3 jbd 47281 1 ext3 ums_realtek 13012 0 usb_storage 35142 1 ums_realtek uas 13096 0 sd_mod 35425 2 crc_t10dif 12332 1 sd_mod ahci 20821 1 i915 307698 2 libahci 18308 1 ahci i2c_algo_bit 12713 1 i915 ehci_hcd 35509 0 libata 124981 2 libahci,ahci drm_kms_helper 22699 1 i915 usbcore 104352 7 ehci_hcd,uas,usb_storage,ums_realtek,usbhid,uvcvideo thermal 13103 0 scsi_mod 135124 5 libata,sd_mod,uas,usb_storage,sg fan 12594 0 button 12817 1 i915 video 17412 1 i915 r8169 41810 0 mii 12595 1 r8169 usb_common 12338 1 usbcore drm 134178 3 drm_kms_helper,i915 i2c_core 19116 6 drm,drm_kms_helper,i2c_algo_bit,i915,i2c_i801,videodev thermal_sys 17752 4 video,fan,thermal,processor
filename: /lib/modules/3.2.0-3-686-pae/kernel/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko license: Dual BSD/GPL description: Broadcom 802.11n wireless LAN driver. author: Broadcom Corporation alias: pci:v000014E4d00000576sv*sd*bc*sc*i* alias: pci:v000014E4d00004727sv*sd*bc*sc*i* alias: pci:v000014E4d00004353sv*sd*bc*sc*i* alias: pci:v000014E4d00004357sv*sd*bc*sc*i* depends: mac80211,brcmutil,cfg80211,cordic,crc8 intree: Y vermagic: 3.2.0-3-686-pae SMP mod_unload modversions 686
0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes
/sys/class/rfkill/rfkill0/state state => 2 echo "1" > /sys/class/rfkill/rfkill0/state (does not work, remains 2)
