Drop defconfigs that were destined to enable specific builds, but they are not used at all. Let's clean them. Signed-off-by: Ozan Çağlayan <ozancag@xxxxxxxxx> --- defconfigs/README | 2 - defconfigs/atheros-debug.mk | 649 -------------------------------------------- 2 files changed, 651 deletions(-) delete mode 100644 defconfigs/README delete mode 100644 defconfigs/atheros-debug.mk diff --git a/defconfigs/README b/defconfigs/README deleted file mode 100644 index 5dcd84a..0000000 --- a/defconfigs/README +++ /dev/null @@ -1,2 +0,0 @@ -You can stuff into this directory default config.mk files which are suited -for debugging or other testing purposes. diff --git a/defconfigs/atheros-debug.mk b/defconfigs/atheros-debug.mk deleted file mode 100644 index 285b231..0000000 --- a/defconfigs/atheros-debug.mk +++ /dev/null @@ -1,649 +0,0 @@ -export - -## NOTE -## Make sure to have each variable declaration start -## in the first column, no whitespace allowed. - -ifeq ($(wildcard $(KLIB_BUILD)/.config),) -# These will be ignored by compat autoconf - CONFIG_PCI=y - CONFIG_USB=y - CONFIG_PCMCIA=y - CONFIG_SSB=m -else -include $(KLIB_BUILD)/.config -endif - -ifneq ($(wildcard $(KLIB_BUILD)/Makefile),) - -COMPAT_LATEST_VERSION = 1 - -KERNEL_VERSION := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^\([0-9]\)\..*/\1/p') - -ifneq ($(KERNEL_VERSION),2) -KERNEL_SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^3\.\([0-9]\+\).*/\1/p') -else -COMPAT_26LATEST_VERSION = 39 -KERNEL_26SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p') -COMPAT_26VERSIONS := $(shell I=$(COMPAT_26LATEST_VERSION); while [ "$$I" -gt $(KERNEL_26SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done) -$(foreach ver,$(COMPAT_26VERSIONS),$(eval CONFIG_COMPAT_KERNEL_2_6_$(ver)=y)) -KERNEL_SUBLEVEL := -1 -endif - -COMPAT_VERSIONS := $(shell I=$(COMPAT_LATEST_VERSION); while [ "$$I" -gt $(KERNEL_SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done) -$(foreach ver,$(COMPAT_VERSIONS),$(eval CONFIG_COMPAT_KERNEL_3_$(ver)=y)) - -ifdef CONFIG_COMPAT_KERNEL_2_6_24 -$(error "ERROR: compat-wireless by default supports kernels >= 2.6.24, try enabling only one driver though") -endif #CONFIG_COMPAT_KERNEL_2_6_24 - -ifeq ($(CONFIG_CFG80211),y) -$(error "ERROR: your kernel has CONFIG_CFG80211=y, you should have it CONFIG_CFG80211=m if you want to use this thing.") -endif - - -# 2.6.27 has FTRACE_DYNAMIC borked, so we will complain if -# you have it enabled, otherwise you will very likely run into -# a kernel panic. -ifeq ($(shell test $(KERNEL_VERSION) -eq 2 -a $(KERNEL_SUBLEVEL) -eq 27 && echo yes),yes) -ifeq ($(CONFIG_DYNAMIC_FTRACE),y) -$(error "ERROR: Your 2.6.27 kernel has CONFIG_DYNAMIC_FTRACE, please upgrade your distribution kernel as newer ones should not have this enabled (and if so report a bug) or remove this warning if you know what you are doing") -endif -endif - -# This is because with CONFIG_MAC80211 include/linux/skbuff.h will -# enable on 2.6.27 a new attribute: -# -# skb->do_not_encrypt -# -# and on 2.6.28 another new attribute: -# -# skb->requeue -# -# In kernel 2.6.32 both attributes were removed. -# -ifeq ($(shell test $(KERNEL_VERSION) -eq 2 -a $(KERNEL_SUBLEVEL) -ge 27 -a $(KERNEL_SUBLEVEL) -le 31 && echo yes),yes) -ifeq ($(CONFIG_MAC80211),) -$(error "ERROR: Your >=2.6.27 and <= 2.6.31 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.") -endif -endif - -ifneq ($(KERNELRELEASE),) # This prevents a warning - -# We will warn when you don't have MQ support or NET_SCHED enabled. -# -# We could consider just quiting if MQ and NET_SCHED is disabled -# as I suspect all users of this package want 802.11e (WME) and -# 802.11n (HT) support. -ifeq ($(CONFIG_NET_SCHED),) - QOS_REQS_MISSING+=CONFIG_NET_SCHED -endif - -ifneq ($(QOS_REQS_MISSING),) # Complain about our missing dependencies -$(warning "WARNING: You are running a kernel >= 2.6.23, you should enable in it $(QOS_REQS_MISSING) for 802.11[ne] support") -endif - -endif # build check -endif # kernel Makefile check - -# These both are needed by compat-wireless || compat-bluetooth so enable them - CONFIG_COMPAT_RFKILL=y - -ifeq ($(CONFIG_MAC80211),y) -$(error "ERROR: you have MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If you are using Fedora upgrade your kernel as later version should this set as modular. For further information on Fedora see https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using your own kernel recompile it and make mac80211 modular") -else - CONFIG_COMPAT_WIRELESS=y - CONFIG_COMPAT_WIRELESS_MODULES=m - CONFIG_COMPAT_VAR_MODULES=m -# We could technically separate these but not yet, we only have b44 -# Note that we don't intend on backporting network drivers that -# use Multiqueue as that was a pain to backport to kernels older than -# 2.6.27. But -- we could just disable those drivers from kernels -# older than 2.6.27 - CONFIG_COMPAT_NETWORK_MODULES=m - CONFIG_COMPAT_NET_USB_MODULES=m -endif - -# The Bluetooth compatibility only builds on kernels >= 2.6.27 for now -ifndef CONFIG_COMPAT_KERNEL_2_6_27 -ifeq ($(CONFIG_BT),y) -# we'll ignore compiling bluetooth -else - CONFIG_COMPAT_BLUETOOTH=y - CONFIG_COMPAT_BLUETOOTH_MODULES=m -endif -endif #CONFIG_COMPAT_KERNEL_2_6_27 - -ifdef CONFIG_COMPAT_KERNEL_2_6_33 -ifdef CONFIG_FW_LOADER - CONFIG_COMPAT_FIRMWARE_CLASS=m -endif #CONFIG_FW_LOADER -endif #CONFIG_COMPAT_KERNEL_2_6_33 - -# Wireless subsystem stuff -CONFIG_MAC80211=m - -CONFIG_MAC80211_DEBUGFS=y -CONFIG_MAC80211_NOINLINE=y -CONFIG_MAC80211_VERBOSE_DEBUG=y -CONFIG_MAC80211_HT_DEBUG=y -# CONFIG_MAC80211_TKIP_DEBUG=y -# CONFIG_MAC80211_IBSS_DEBUG=y -CONFIG_MAC80211_VERBOSE_PS_DEBUG=y -# CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y -# CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG=y -CONFIG_MAC80211_DEBUG_COUNTERS=y -# CONFIG_MAC80211_DRIVER_API_TRACER=y - -# choose between pid and minstrel as default rate control algorithm -CONFIG_MAC80211_RC_DEFAULT=minstrel_ht -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -# CONFIG_MAC80211_RC_DEFAULT_PID=y -# This is the one used by our compat-wireless net/mac80211/rate.c -# in case you have and old kernel which is overriding this to pid. -CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht -CONFIG_MAC80211_RC_PID=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_MINSTREL_HT=y -ifdef CONFIG_LEDS_TRIGGERS -CONFIG_MAC80211_LEDS=y -endif #CONFIG_LEDS_TRIGGERS - -# enable mesh networking too -CONFIG_MAC80211_MESH=y - -CONFIG_CFG80211=m -CONFIG_CFG80211_DEFAULT_PS=y -CONFIG_CFG80211_DEBUGFS=y -# CONFIG_NL80211_TESTMODE=y -CONFIG_CFG80211_DEVELOPER_WARNINGS=y -CONFIG_CFG80211_REG_DEBUG=y -# See below for wext stuff - -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG=y - -CONFIG_BT=m -CONFIG_COMPAT_BT_L2CAP=y -CONFIG_COMPAT_BT_SCO=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -# CONFIG_BT_CMTP depends on ISDN_CAPI -ifdef CONFIG_ISDN_CAPI -CONFIG_BT_CMTP=m -endif #CONFIG_ISDN_CAPI -ifndef CONFIG_COMPAT_KERNEL_2_6_28 -CONFIG_COMPAT_BT_HIDP=m -endif #CONFIG_COMPAT_KERNEL_2_6_28 - -CONFIG_BT_HCIUART=M -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y - -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m - -ifdef CONFIG_PCMCIA -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -endif #CONFIG_PCMCIA - - -# We need CONFIG_WIRELESS_EXT for CONFIG_CFG80211_WEXT for every kernel -# version. The new way CONFIG_CFG80211_WEXT is called from the kernel -# does not work with compat-wireless because it calls some callback -# function on struct wiphy. This struct is shipped with compat-wireless -# and changes from kernel version to version. We are using the -# wireless_handlers attribute which will be activated by -# CONFIG_WIRELESS_EXT. -ifdef CONFIG_WIRELESS_EXT -CONFIG_CFG80211_WEXT=y -else #CONFIG_CFG80211_WEXT -$(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.") -endif #CONFIG_WIRELESS_EXT - -ifdef CONFIG_STAGING -CONFIG_COMPAT_STAGING=m -endif #CONFIG_STAGING - -# mac80211 test driver -CONFIG_MAC80211_HWSIM=m - -CONFIG_ATH5K=m -CONFIG_ATH5K_DEBUG=y -# CONFIG_ATH5K_AHB=y - -CONFIG_ATH9K=m -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_DEBUGFS=y -# CONFIG_ATH9K_AHB=y -CONFIG_ATH9K_PKTLOG=y - -# Disable this to get minstrel as default, we leave the ath9k -# rate control algorithm as the default for now as that is also -# default upstream on the kernel. We will move this to minstrel -# as default once we get minstrel properly tested and blessed by -# our systems engineering team. CCK rates also need to be used -# for long range considerations. -CONFIG_ATH9K_RATE_CONTROL=y - -# PCI Drivers -ifdef CONFIG_PCI - -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_PCI=y - -CONFIG_IWLAGN=m -# CONFIG_IWLWIFI_DEBUG=y -# CONFIG_IWLWIFI_DEBUGFS=y -# CONFIG_IWLWIFI_DEVICE_TRACING=y -# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y -CONFIG_IWL_P2P=y - -CONFIG_IWLWIFI_LEGACY=m -CONFIG_COMPAT_IWL4965=m -CONFIG_IWL3945=m -# CONFIG_IWLWIFI_LEGACY_DEBUG=y -# CONFIG_IWLWIFI_LEGACY_DEBUGFS=y -# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING=y - - -CONFIG_B43=m -CONFIG_B43_HWRNG=y -CONFIG_B43_PCI_AUTOSELECT=y -ifdef CONFIG_PCMCIA -CONFIG_B43_PCMCIA=y -endif #CONFIG_PCMCIA -ifdef CONFIG_MAC80211_LEDS -CONFIG_B43_LEDS=y -endif #CONFIG_MAC80211_LEDS -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_N=y -# CONFIG_B43_FORCE_PIO=y -# CONFIG_B43_DEBUG=y - -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_HWRNG=y -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -ifdef CONFIG_MAC80211_LEDS -CONFIG_B43LEGACY_LEDS=y -endif #CONFIG_MAC80211_LEDS -# CONFIG_B43LEGACY_DEBUG=y -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y - -ifdef CONFIG_WIRELESS_EXT -# The Intel ipws -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG=y - -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG=y -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG=y -# The above enables use a second interface prefixed 'rtap'. -# Example usage: -# -# % modprobe ipw2200 rtap_iface=1 -# % ifconfig rtap0 up -# % tethereal -i rtap0 -# -# If you do not specify 'rtap_iface=1' as a module parameter then -# the rtap interface will not be created and you will need to turn -# it on via sysfs: -# -# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface -endif #CONFIG_WIRELESS_EXT - -ifdef CONFIG_SSB -# Sonics Silicon Backplane -CONFIG_SSB_SPROM=y - -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -ifdef CONFIG_PCMCIA -CONFIG_SSB_PCMCIAHOST=y -endif #CONFIG_PCMCIA -# CONFIG_SSB_DEBUG=y -CONFIG_SSB_DRIVER_PCICORE=y -endif #CONFIG_SSB - -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI=y -# CONFIG_BCMA_DEBUG=y - -CONFIG_P54_PCI=m - -CONFIG_B44=m -CONFIG_B44_PCI=y - -CONFIG_RTL8180=m - -CONFIG_ADM8211=m - -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -ifdef CONFIG_CRC_CCITT -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -# CONFIG_RT2800PCI_RT53XX=y -endif #CONFIG_CRC_CCITT -NEED_RT2X00=y - -# Two rt2x00 drivers require firmware: rt61pci and rt73usb. They depend on -# CRC to check the firmware. We check here first for the PCI -# driver as we're in the PCI section. -ifdef CONFIG_CRC_ITU_T -CONFIG_RT61PCI=m -endif #CONFIG_CRC_ITU_T - -CONFIG_MWL8K=m - -# Ethernet drivers go here -CONFIG_ATL1=m -CONFIG_ATL2=m -CONFIG_ATL1E=m -ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_ATL1C=n -else #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_ATL1C=m -endif #CONFIG_COMPAT_KERNEL_2_6_27 - -ifdef CONFIG_WIRELESS_EXT -CONFIG_HERMES=m -CONFIG_HERMES_CACHE_FW_ON_INIT=y -ifdef CONFIG_PPC_PMAC -CONFIG_APPLE_AIRPORT=m -endif #CONFIG_PPC_PMAC -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCI_HERMES=m -ifdef CONFIG_PCMCIA -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -endif #CONFIG_PCMCIA -endif #CONFIG_WIRELESS_EXT - -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m - -ifdef CONFIG_COMPAT_STAGING -CONFIG_BRCMSMAC=m -endif #CONFIG_COMPAT_STAGING - -endif #CONFIG_PCI -## end of PCI - -ifdef CONFIG_PCMCIA - -ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS=n -CONFIG_LIBERTAS_CS=n -else #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_CS=m -NEED_LIBERTAS=y -endif #CONFIG_COMPAT_KERNEL_2_6_27 - -endif #CONFIG_PCMCIA -## end of PCMCIA - -# This is required for some cards -CONFIG_EEPROM_93CX6=m - -# USB Drivers -ifdef CONFIG_USB -ifndef CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_COMPAT_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG=y -endif #CONFIG_COMPAT_KERNEL_2_6_29 - -# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat... - -# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC -# All of these devices are based on Broadcom 4320 chip which -# is only wireless RNDIS chip known to date. -# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER -# it also requires new RNDIS_HOST and CDC_ETHER modules which we add -ifdef CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_USB_COMPAT_USBNET=n -CONFIG_USB_NET_COMPAT_RNDIS_HOST=n -CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n -CONFIG_USB_NET_COMPAT_CDCETHER=n -else #CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_USB_COMPAT_USBNET=m -ifdef CONFIG_USB_NET_CDCETHER -CONFIG_USB_NET_COMPAT_RNDIS_HOST=m -CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m -endif #CONFIG_USB_NET_CDCETHER -ifdef CONFIG_USB_NET_CDCETHER_MODULE -CONFIG_USB_NET_COMPAT_RNDIS_HOST=m -CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m -endif #CONFIG_USB_NET_CDCETHER -CONFIG_USB_NET_COMPAT_CDCETHER=m -endif #CONFIG_COMPAT_KERNEL_2_6_29 - - -CONFIG_P54_USB=m -CONFIG_RTL8187=m -ifdef CONFIG_MAC80211_LEDS -CONFIG_RTL8187_LEDS=y -endif #CONFIG_MAC80211_LEDS - -CONFIG_AT76C50X_USB=m - -ifndef CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_CARL9170=m -ifdef CONFIG_MAC80211_LEDS -CONFIG_CARL9170_LEDS=y -endif #CONFIG_MAC80211_LEDS -CONFIG_CARL9170_DEBUGFS=y -CONFIG_CARL9170_WPC=y -endif #CONFIG_COMPAT_KERNEL_2_6_29 - -# This activates a threading fix for usb urb. -# this is mainline commit: b3e670443b7fb8a2d29831b62b44a039c283e351 -# This fix will be included in some stable releases. -CONFIG_COMPAT_USB_URB_THREAD_FIX=y - -CONFIG_ATH9K_HTC=m -CONFIG_ATH9K_HTC_DEBUGFS=y - -# RT2500USB does not require firmware -CONFIG_RT2500USB=m -ifdef CONFIG_CRC_CCITT -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -# CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_UNKNOWN=y -endif #CONFIG_CRC_CCITT -CONFIG_RT2X00_LIB_USB=m -NEED_RT2X00=y -# RT73USB requires firmware -ifdef CONFIG_CRC_ITU_T -CONFIG_RT73USB=m -endif #CONFIG_CRC_ITU_T - -ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_THINFIRM_USB=n -CONFIG_LIBERTAS_USB=n -NEED_LIBERTAS=n -else #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_LIBERTAS_USB=m -NEED_LIBERTAS=y -endif #CONFIG_COMPAT_KERNEL_2_6_27 - -CONFIG_ORINOCO_USB=m - -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_ATH3K=m - -CONFIG_RTL8192CU=m - -endif #CONFIG_USB end of USB driver list - -ifdef CONFIG_SPI_MASTER -ifndef CONFIG_COMPAT_KERNEL_2_6_25 - -ifdef CONFIG_CRC7 -CONFIG_WL1251_SPI=m -CONFIG_WL12XX_SPI=m -endif #CONFIG_CRC7 -CONFIG_P54_SPI=m - -ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_SPI=n -NEED_LIBERTAS=n -else #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_SPI=m -NEED_LIBERTAS=y -endif #CONFIG_COMPAT_KERNEL_2_6_27 - -endif #CONFIG_COMPAT_KERNEL_2_6_25 -endif #CONFIG_SPI_MASTER end of SPI driver list - -ifdef CONFIG_MMC - -CONFIG_SSB_SDIOHOST=y -CONFIG_B43_SDIO=y - -ifdef CONFIG_CRC7 -ifdef CONFIG_WL12XX_PLATFORM_DATA -CONFIG_COMPAT_WL1251_SDIO=m -endif #CONFIG_WL12XX_PLATFORM_DATA - -ifndef CONFIG_COMPAT_KERNEL_2_6_32 -ifdef CONFIG_WL12XX_PLATFORM_DATA -CONFIG_COMPAT_WL12XX_SDIO=m -endif #CONFIG_WL12XX_PLATFORM_DATA -endif #CONFIG_COMPAT_KERNEL_2_6_32 - -endif #CONFIG_CRC7 - -CONFIG_MWIFIEX_SDIO=m - -ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_SDIO=n -NEED_LIBERTAS=n -else #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_SDIO=m -NEED_LIBERTAS=y -endif #CONFIG_COMPAT_KERNEL_2_6_27 - -CONFIG_IWM=m -# CONFIG_IWM_DEBUG=y - -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_MRVL_SDIO=m - -ifdef CONFIG_COMPAT_STAGING -ifdef CONFIG_WIRELESS_EXT -# CONFIG_ATH6KL_DISABLE_TARGET_DBGLOGS is not set -# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set -# CONFIG_ATH6KL_ENABLE_HOST_DEBUG is not set -CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y -# CONFIG_ATH6KL_HCI_BRIDGE is not set -# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set -# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set -CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y -CONFIG_ATH6K_LEGACY=m - -CONFIG_BRCMFMAC=m - -endif #CONFIG_WIRELESS_EXT -endif #CONFIG_COMPAT_STAGING - - -endif #CONFIG_MMC - -CONFIG_RTLWIFI=m -CONFIG_RTL8192C_COMMON=m - -# Common rt2x00 requirements -ifeq ($(NEED_RT2X00),y) -CONFIG_RT2X00=y -CONFIG_RT2X00_LIB=m -CONFIG_RT2800_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -# CONFIG_RT2X00_LIB_SOC=y -ifdef CONFIG_COMPAT_KERNEL_2_6_25 -CONFIG_RT2X00_LIB_LEDS=n -else #CONFIG_COMPAT_KERNEL_2_6_25 -ifdef CONFIG_LEDS_CLASS -CONFIG_RT2X00_LIB_LEDS=y -endif #CONFIG_LEDS_CLASS -endif #CONFIG_COMPAT_KERNEL_2_6_25 -# CONFIG_RT2X00_DEBUG=y -# CONFIG_RT2X00_LIB_DEBUGFS -endif - -# p54 -CONFIG_P54_COMMON=m -ifdef CONFIG_MAC80211_LEDS -CONFIG_P54_LEDS=y -endif #CONFIG_MAC80211_LEDS - -# Atheros -CONFIG_ATH_COMMON=m -CONFIG_ATH_DEBUG=y - -ifdef CONFIG_COMPAT_STAGING -CONFIG_BRCMUTIL=m -# CONFIG_BRCMDBG=y -endif #CONFIG_COMPAT_STAGING - -ifdef CONFIG_CRC7 -CONFIG_WL1251=m -CONFIG_WL12XX=m -CONFIG_WL12XX_HT=y -endif #CONFIG_CRC7 - -CONFIG_MWIFIEX=m - -ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS=n -else #CONFIG_COMPAT_KERNEL_2_6_27 -ifeq ($(NEED_LIBERTAS),y) -CONFIG_LIBERTAS_THINFIRM=m -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_MESH=y -# CONFIG_LIBERTAS_DEBUG=y -endif -endif #CONFIG_COMPAT_KERNEL_2_6_27 - -# We need the backported rfkill module on kernel < 2.6.31. -# In more recent kernel versions use the in kernel rfkill module. -ifdef CONFIG_COMPAT_KERNEL_2_6_31 -CONFIG_RFKILL_BACKPORT=m -ifdef CONFIG_LEDS_TRIGGERS -CONFIG_RFKILL_BACKPORT_LEDS=y -endif #CONFIG_LEDS_TRIGGERS -CONFIG_RFKILL_BACKPORT_INPUT=y -endif #CONFIG_COMPAT_KERNEL_2_6_31 - -- 1.7.11.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
