From: Woody Hung <Woody.Hung@xxxxxxxxxxxx>
Date: Tue, 31 Jul 2012 21:53:33 +0800
This patch is going to fix the resuming failed from S3/S4
for rt3290 chip.
Signed-off-by: Woody Hung <Woody.Hung@xxxxxxxxxxxx>
CC-by: Kevin Chou <kevin.chou@xxxxxxxxxxxx>
Signed-off-by: Chen, Chien-Chia <machen@xxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 68 +++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2800pci.c | 71 -------------------------------
2 files changed, 68 insertions(+), 71 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index e76f03c..7bc4768 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -221,6 +221,67 @@ static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
mutex_unlock(&rt2x00dev->csr_mutex);
}
+static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
+ int i, count;
+
+ rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®);
+ if (rt2x00_get_field32(reg, WLAN_EN))
+ return 0;
+
+ rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
+ rt2x00_set_field32(®, FRC_WL_ANT_SET, 1);
+ rt2x00_set_field32(®, WLAN_CLK_EN, 0);
+ rt2x00_set_field32(®, WLAN_EN, 1);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+
+ udelay(REGISTER_BUSY_DELAY);
+
+ count = 0;
+ do {
+ /*
+ * Check PLL_LD & XTAL_RDY.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2800_register_read(rt2x00dev, CMB_CTRL, ®);
+ if (rt2x00_get_field32(reg, PLL_LD) &&
+ rt2x00_get_field32(reg, XTAL_RDY))
+ break;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ if (i >= REGISTER_BUSY_COUNT) {
+
+ if (count >= 10)
+ return -EIO;
+
+ rt2800_register_write(rt2x00dev, 0x58, 0x018);
+ udelay(REGISTER_BUSY_DELAY);
+ rt2800_register_write(rt2x00dev, 0x58, 0x418);
+ udelay(REGISTER_BUSY_DELAY);
+ rt2800_register_write(rt2x00dev, 0x58, 0x618);
+ udelay(REGISTER_BUSY_DELAY);
+ count++;
+ } else {
+ count = 0;
+ }
+
+ rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®);
+ rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0);
+ rt2x00_set_field32(®, WLAN_CLK_EN, 1);
+ rt2x00_set_field32(®, WLAN_RESET, 1);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+ udelay(10);
+ rt2x00_set_field32(®, WLAN_RESET, 0);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+ udelay(10);
+ rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
+ } while (count != 0);
+
+ return 0;
+}
+
void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1)
@@ -400,6 +461,13 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
{
unsigned int i;
u32 reg;
+ int retval;
+
+ if (rt2x00_rt(rt2x00dev, RT3290)) {
+ retval = rt2800_enable_wlan_rt3290(rt2x00dev);
+ if (retval)
+ return -EBUSY;
+ }
/*
* If driver doesn't wake up firmware here,
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 235376e..98aa426 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -980,66 +980,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
return rt2800_validate_eeprom(rt2x00dev);
}
-static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
- int i, count;
-
- rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®);
- if (rt2x00_get_field32(reg, WLAN_EN))
- return 0;
-
- rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
- rt2x00_set_field32(®, FRC_WL_ANT_SET, 1);
- rt2x00_set_field32(®, WLAN_CLK_EN, 0);
- rt2x00_set_field32(®, WLAN_EN, 1);
- rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
-
- udelay(REGISTER_BUSY_DELAY);
-
- count = 0;
- do {
- /*
- * Check PLL_LD & XTAL_RDY.
- */
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_register_read(rt2x00dev, CMB_CTRL, ®);
- if (rt2x00_get_field32(reg, PLL_LD) &&
- rt2x00_get_field32(reg, XTAL_RDY))
- break;
- udelay(REGISTER_BUSY_DELAY);
- }
-
- if (i >= REGISTER_BUSY_COUNT) {
-
- if (count >= 10)
- return -EIO;
-
- rt2800_register_write(rt2x00dev, 0x58, 0x018);
- udelay(REGISTER_BUSY_DELAY);
- rt2800_register_write(rt2x00dev, 0x58, 0x418);
- udelay(REGISTER_BUSY_DELAY);
- rt2800_register_write(rt2x00dev, 0x58, 0x618);
- udelay(REGISTER_BUSY_DELAY);
- count++;
- } else {
- count = 0;
- }
-
- rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®);
- rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0);
- rt2x00_set_field32(®, WLAN_CLK_EN, 1);
- rt2x00_set_field32(®, WLAN_RESET, 1);
- rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
- udelay(10);
- rt2x00_set_field32(®, WLAN_RESET, 0);
- rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
- udelay(10);
- rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
- } while (count != 0);
-
- return 0;
-}
static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
@@ -1063,17 +1003,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
return retval;
/*
- * In probe phase call rt2800_enable_wlan_rt3290 to enable wlan
- * clk for rt3290. That avoid the MCU fail in start phase.
- */
- if (rt2x00_rt(rt2x00dev, RT3290)) {
- retval = rt2800_enable_wlan_rt3290(rt2x00dev);
-
- if (retval)
- return retval;
- }
-
- /*
* This device has multiple filters for control frames
* and has a separate filter for PS Poll frames.
*/
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
