From: Johannes Berg <johannes.berg@xxxxxxxxx>
In order to support using a different MAC address
for the P2P Device address we must first have a
P2P Device abstraction that can be assigned a MAC
address.
This abstraction will also be useful to support
offloading P2P operations to the device, e.g.
periodic listen for discoverability.
Currently, the driver is responsible for assigning
a MAC address to the P2P Device, but this could be
changed by allowing a MAC address to be given to
the NEW_INTERFACE command.
As it has no associated netdev, a P2P Device can
only be identified by its wdev identifier but the
previous patches allowed using the wdev identifier
in various APIs, e.g. remain-on-channel.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
include/linux/nl80211.h | 30 ++++++++++--
include/net/cfg80211.h | 40 +++++++++++++++-
net/mac80211/iface.c | 3 ++
net/mac80211/util.c | 2 +
net/wireless/chan.c | 5 ++
net/wireless/core.c | 53 +++++++++++++++++++-
net/wireless/mlme.c | 10 ++--
net/wireless/nl80211.c | 122 ++++++++++++++++++++++++++++++++++++++++++++---
net/wireless/util.c | 18 ++++++-
9 files changed, 264 insertions(+), 19 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2f38788..4584162 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -565,6 +565,14 @@
* %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
* %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
*
+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
+ * its %NL80211_ATTR_WDEV identifier. It must have been created with
+ * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
+ * P2P Device can be used for P2P operations, e.g. remain-on-channel and
+ * public action frame TX.
+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
+ * its %NL80211_ATTR_WDEV identifier.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -708,6 +716,9 @@ enum nl80211_commands {
NL80211_CMD_CH_SWITCH_NOTIFY,
+ NL80211_CMD_START_P2P_DEVICE,
+ NL80211_CMD_STOP_P2P_DEVICE,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1575,6 +1586,10 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_MESH_POINT: mesh point
* @NL80211_IFTYPE_P2P_CLIENT: P2P client
* @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
+ * and therefore can't be created in the normal ways, use the
+ * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
+ * commands to create and destroy one
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -1593,6 +1608,7 @@ enum nl80211_iftype {
NL80211_IFTYPE_MESH_POINT,
NL80211_IFTYPE_P2P_CLIENT,
NL80211_IFTYPE_P2P_GO,
+ NL80211_IFTYPE_P2P_DEVICE,
/* keep last */
NUM_NL80211_IFTYPES,
@@ -2994,12 +3010,18 @@ enum nl80211_ap_sme_features {
* @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
* to work properly to suppport receiving regulatory hints from
* cellular base stations.
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
+ * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
+ * in the interface combinations, even when it's only used for scan
+ * and remain-on-channel. This could be due to, for example, the
+ * remain-on-channel implementation requiring a channel context.
*/
enum nl80211_feature_flags {
- NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
- NL80211_FEATURE_HT_IBSS = 1 << 1,
- NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
- NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+ NL80211_FEATURE_HT_IBSS = 1 << 1,
+ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+ NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
+ NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
};
/**
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 493fa0c..4c518f1 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1437,7 +1437,8 @@ struct cfg80211_gtk_rekey_data {
* @add_virtual_intf: create a new virtual interface with the given name,
* must set the struct wireless_dev's iftype. Beware: You must create
* the new netdev in the wiphy's network namespace! Returns the struct
- * wireless_dev, or an ERR_PTR.
+ * wireless_dev, or an ERR_PTR. For P2P device wdevs, the driver must
+ * also set the address member in the wdev.
*
* @del_virtual_intf: remove the virtual interface
*
@@ -1616,6 +1617,9 @@ struct cfg80211_gtk_rekey_data {
* @get_channel: Get the current operating channel for the virtual interface.
* For monitor interfaces, it should return %NULL unless there's a single
* current monitoring channel.
+ *
+ * @start_p2p_device: Start the given P2P device.
+ * @stop_p2p_device: Stop the given P2P device.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -1832,6 +1836,11 @@ struct cfg80211_ops {
(*get_channel)(struct wiphy *wiphy,
struct wireless_dev *wdev,
enum nl80211_channel_type *type);
+
+ int (*start_p2p_device)(struct wiphy *wiphy,
+ struct wireless_dev *wdev);
+ void (*stop_p2p_device)(struct wiphy *wiphy,
+ struct wireless_dev *wdev);
};
/*
@@ -2395,6 +2404,8 @@ struct cfg80211_cached_keys;
* @cleanup_work: work struct used for cleanup that can't be done directly
* @beacon_interval: beacon interval used on this device for transmitting
* beacons, 0 when not valid
+ * @address: The address for this device, valid only if @netdev is %NULL
+ * @p2p_started: true if this is a P2P Device that has been started
*/
struct wireless_dev {
struct wiphy *wiphy;
@@ -2413,7 +2424,9 @@ struct wireless_dev {
struct work_struct cleanup_work;
- bool use_4addr;
+ bool use_4addr, p2p_started;
+
+ u8 address[ETH_ALEN] __aligned(sizeof(u16));
/* currently used for IBSS and SME - might be rearranged later */
u8 ssid[IEEE80211_MAX_SSID_LEN];
@@ -2461,6 +2474,13 @@ struct wireless_dev {
#endif
};
+static inline u8 *wdev_address(struct wireless_dev *wdev)
+{
+ if (wdev->netdev)
+ return wdev->netdev->dev_addr;
+ return wdev->address;
+}
+
/**
* wdev_priv - return wiphy priv from wireless_dev
*
@@ -3528,6 +3548,22 @@ void cfg80211_ch_switch_notify(struct net_device *dev, int freq,
*/
u32 cfg80211_calculate_bitrate(struct rate_info *rate);
+/**
+ * cfg80211_unregister_wdev - remove the given wdev
+ * @wdev: struct wireless_dev to remove
+ *
+ * Call this function only for wdevs that have no netdev assigned,
+ * e.g. P2P Devices. It removes the device from the list so that
+ * it can no longer be used. It is necessary to call this function
+ * even when cfg80211 requests the removal of the interface by
+ * calling the del_virtual_intf() callback. The function must also
+ * be called when the driver wishes to unregister the wdev, e.g.
+ * when the device is unbound from the driver.
+ *
+ * Requires the RTNL to be held.
+ */
+void cfg80211_unregister_wdev(struct wireless_dev *wdev);
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index bfb57dc..e8f116b 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -449,6 +449,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_P2P_DEVICE:
/* cannot happen */
WARN_ON(1);
break;
@@ -1147,6 +1148,8 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ /* not yet supported */
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
BUG();
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 39b82fe..454ae63 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1385,6 +1385,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
case NL80211_IFTYPE_MONITOR:
/* ignore virtual */
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ /* not yet supported */
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index d355f67..6ce1754 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -143,6 +143,11 @@ cfg80211_get_chan_state(struct wireless_dev *wdev,
case NL80211_IFTYPE_WDS:
/* these interface types don't really have a channel */
return;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ if (wdev->wiphy->features &
+ NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL)
+ *chanmode = CHAN_MODE_EXCLUSIVE;
+ return;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
WARN_ON(1);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 31b40cc..91b3004 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -230,9 +230,24 @@ static int cfg80211_rfkill_set_block(void *data, bool blocked)
rtnl_lock();
mutex_lock(&rdev->devlist_mtx);
- list_for_each_entry(wdev, &rdev->wdev_list, list)
- if (wdev->netdev)
+ list_for_each_entry(wdev, &rdev->wdev_list, list) {
+ if (wdev->netdev) {
dev_close(wdev->netdev);
+ continue;
+ }
+ /* otherwise, check iftype */
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_P2P_DEVICE:
+ if (!wdev->p2p_started)
+ break;
+ rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+ wdev->p2p_started = false;
+ rdev->opencount--;
+ break;
+ default:
+ break;
+ }
+ }
mutex_unlock(&rdev->devlist_mtx);
rtnl_unlock();
@@ -407,6 +422,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy)
if (WARN_ON(wiphy->software_iftypes & types))
return -EINVAL;
+ /* Only a single P2P_DEVICE can be allowed */
+ if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
+ c->limits[j].max > 1))
+ return -EINVAL;
+
cnt += c->limits[j].max;
/*
* Don't advertise an unsupported type
@@ -734,6 +754,35 @@ static void wdev_cleanup_work(struct work_struct *work)
dev_put(wdev->netdev);
}
+void cfg80211_unregister_wdev(struct wireless_dev *wdev)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+
+ ASSERT_RTNL();
+
+ if (WARN_ON(wdev->netdev))
+ return;
+
+ mutex_lock(&rdev->devlist_mtx);
+ list_del_rcu(&wdev->list);
+ rdev->devlist_generation++;
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_P2P_DEVICE:
+ if (!wdev->p2p_started)
+ break;
+ rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+ wdev->p2p_started = false;
+ rdev->opencount--;
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+ mutex_unlock(&rdev->devlist_mtx);
+}
+EXPORT_SYMBOL(cfg80211_unregister_wdev);
+
static struct device_type wiphy_type = {
.name = "wlan",
};
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 1cdb1d5..8fd0242 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -736,7 +736,6 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
const u8 *buf, size_t len, bool no_cck,
bool dont_wait_for_ack, u64 *cookie)
{
- struct net_device *dev = wdev->netdev;
const struct ieee80211_mgmt *mgmt;
u16 stype;
@@ -796,7 +795,7 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_AP_VLAN:
- if (!ether_addr_equal(mgmt->bssid, dev->dev_addr))
+ if (!ether_addr_equal(mgmt->bssid, wdev_address(wdev)))
err = -EINVAL;
break;
case NL80211_IFTYPE_MESH_POINT:
@@ -809,6 +808,11 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
* cfg80211 doesn't track the stations
*/
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ /*
+ * fall through, P2P device only supports
+ * public action frames
+ */
default:
err = -EOPNOTSUPP;
break;
@@ -819,7 +823,7 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
return err;
}
- if (!ether_addr_equal(mgmt->sa, dev->dev_addr))
+ if (!ether_addr_equal(mgmt->sa, wdev_address(wdev)))
return -EINVAL;
/* Transmit the Action frame as requested by user space */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 50b1a0e..19b0607 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1100,6 +1100,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
if (nla_put_u32(msg, i, NL80211_CMD_REGISTER_BEACONS))
goto nla_put_failure;
}
+ CMD(start_p2p_device, START_P2P_DEVICE);
#ifdef CONFIG_NL80211_TESTMODE
CMD(testmode_cmd, TESTMODE);
@@ -1748,13 +1749,13 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags,
if (dev &&
(nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
- nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name) ||
- nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, dev->dev_addr)))
+ nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name)))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFTYPE, wdev->iftype) ||
nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) ||
+ nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, wdev_address(wdev)) ||
nla_put_u32(msg, NL80211_ATTR_GENERATION,
rdev->devlist_generation ^
(cfg80211_rdev_list_generation << 2)))
@@ -2021,8 +2022,10 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
return PTR_ERR(wdev);
}
- if (type == NL80211_IFTYPE_MESH_POINT &&
- info->attrs[NL80211_ATTR_MESH_ID]) {
+ switch (type) {
+ case NL80211_IFTYPE_MESH_POINT:
+ if (!info->attrs[NL80211_ATTR_MESH_ID])
+ break;
wdev_lock(wdev);
BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
IEEE80211_MAX_MESH_ID_LEN);
@@ -2031,6 +2034,26 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
wdev->mesh_id_up_len);
wdev_unlock(wdev);
+ break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ /*
+ * P2P Device doesn't have a netdev, so doesn't go
+ * through the netdev notifier and must be added here
+ */
+ mutex_init(&wdev->mtx);
+ INIT_LIST_HEAD(&wdev->event_list);
+ spin_lock_init(&wdev->event_lock);
+ INIT_LIST_HEAD(&wdev->mgmt_registrations);
+ spin_lock_init(&wdev->mgmt_registrations_lock);
+
+ mutex_lock(&rdev->devlist_mtx);
+ wdev->identifier = ++rdev->wdev_id;
+ list_add_rcu(&wdev->list, &rdev->wdev_list);
+ rdev->devlist_generation++;
+ mutex_unlock(&rdev->devlist_mtx);
+ break;
+ default:
+ break;
}
if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0,
@@ -6053,6 +6076,7 @@ static int nl80211_register_mgmt(struct sk_buff *skb, struct genl_info *info)
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_P2P_DEVICE:
break;
default:
return -EOPNOTSUPP;
@@ -6099,6 +6123,7 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_P2P_DEVICE:
break;
default:
return -EOPNOTSUPP;
@@ -6195,6 +6220,7 @@ static int nl80211_tx_mgmt_cancel_wait(struct sk_buff *skb, struct genl_info *in
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_P2P_DEVICE:
break;
default:
return -EOPNOTSUPP;
@@ -6810,6 +6836,68 @@ static int nl80211_register_beacons(struct sk_buff *skb, struct genl_info *info)
return 0;
}
+static int nl80211_start_p2p_device(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct wireless_dev *wdev = info->user_ptr[1];
+ int err;
+
+ if (!rdev->ops->start_p2p_device)
+ return -EOPNOTSUPP;
+
+ if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
+ return -EOPNOTSUPP;
+
+ if (wdev->p2p_started)
+ return 0;
+
+ mutex_lock(&rdev->devlist_mtx);
+ err = cfg80211_can_add_interface(rdev, wdev->iftype);
+ mutex_unlock(&rdev->devlist_mtx);
+ if (err)
+ return err;
+
+ err = rdev->ops->start_p2p_device(&rdev->wiphy, wdev);
+ if (err)
+ return err;
+
+ wdev->p2p_started = true;
+ mutex_lock(&rdev->devlist_mtx);
+ rdev->opencount++;
+ mutex_unlock(&rdev->devlist_mtx);
+
+ return 0;
+}
+
+static int nl80211_stop_p2p_device(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct wireless_dev *wdev = info->user_ptr[1];
+
+ if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
+ return -EOPNOTSUPP;
+
+ if (!rdev->ops->stop_p2p_device)
+ return -EOPNOTSUPP;
+
+ if (!wdev->p2p_started)
+ return 0;
+
+ rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+ wdev->p2p_started = false;
+
+ mutex_lock(&rdev->devlist_mtx);
+ rdev->opencount--;
+ mutex_unlock(&rdev->devlist_mtx);
+
+ if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, true);
+ }
+
+ return 0;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -6817,7 +6905,7 @@ static int nl80211_register_beacons(struct sk_buff *skb, struct genl_info *info)
#define NL80211_FLAG_NEED_NETDEV_UP (NL80211_FLAG_NEED_NETDEV |\
NL80211_FLAG_CHECK_NETDEV_UP)
#define NL80211_FLAG_NEED_WDEV 0x10
-/* If a netdev is associated, it must be UP */
+/* If a netdev is associated, it must be UP, P2P must be started */
#define NL80211_FLAG_NEED_WDEV_UP (NL80211_FLAG_NEED_WDEV |\
NL80211_FLAG_CHECK_NETDEV_UP)
@@ -6878,6 +6966,13 @@ static int nl80211_pre_doit(struct genl_ops *ops, struct sk_buff *skb,
}
dev_hold(dev);
+ } else if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP) {
+ if (!wdev->p2p_started) {
+ mutex_unlock(&cfg80211_mutex);
+ if (rtnl)
+ rtnl_unlock();
+ return -ENETDOWN;
+ }
}
cfg80211_lock_rdev(rdev);
@@ -7439,7 +7534,22 @@ static struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
-
+ {
+ .cmd = NL80211_CMD_START_P2P_DEVICE,
+ .doit = nl80211_start_p2p_device,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WDEV |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_STOP_P2P_DEVICE,
+ .doit = nl80211_stop_p2p_device,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
diff --git a/net/wireless/util.c b/net/wireless/util.c
index ce393dd..d7b6722 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -800,6 +800,10 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
if (otype == NL80211_IFTYPE_AP_VLAN)
return -EOPNOTSUPP;
+ /* cannot change into P2P device type */
+ if (ntype == NL80211_IFTYPE_P2P_DEVICE)
+ return -EOPNOTSUPP;
+
if (!rdev->ops->change_virtual_intf ||
!(rdev->wiphy.interface_modes & (1 << ntype)))
return -EOPNOTSUPP;
@@ -877,6 +881,9 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
case NUM_NL80211_IFTYPES:
/* not happening */
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ WARN_ON(1);
+ break;
}
}
@@ -1041,8 +1048,15 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
list_for_each_entry(wdev_iter, &rdev->wdev_list, list) {
if (wdev_iter == wdev)
continue;
- if (!netif_running(wdev_iter->netdev))
- continue;
+ if (wdev_iter->netdev) {
+ if (!netif_running(wdev_iter->netdev))
+ continue;
+ } else if (wdev_iter->iftype == NL80211_IFTYPE_P2P_DEVICE) {
+ if (!wdev_iter->p2p_started)
+ continue;
+ } else {
+ WARN_ON(1);
+ }
if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
continue;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
