Add some comments by the way
Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
drivers/net/wireless/b43/main.c | 21 +++++++++++++--------
1 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index a56f182..f6f8ccd 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2719,32 +2719,37 @@ static int b43_gpio_init(struct b43_wldev *dev)
if (dev->dev->chip_id == 0x4301) {
mask |= 0x0060;
set |= 0x0060;
+ } else if (dev->dev->chip_id == 0x5354) {
+ /* Don't allow overtaking buttons GPIOs */
+ set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */
}
- if (dev->dev->chip_id == 0x5354)
- set &= 0xff02;
+
if (0 /* FIXME: conditional unknown */ ) {
b43_write16(dev, B43_MMIO_GPIO_MASK,
b43_read16(dev, B43_MMIO_GPIO_MASK)
| 0x0100);
- mask |= 0x0180;
- set |= 0x0180;
+ /* BT Coexistance Input */
+ mask |= 0x0080;
+ set |= 0x0080;
+ /* BT Coexistance Out */
+ mask |= 0x0100;
+ set |= 0x0100;
}
if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
+ /* PA is controlled by gpio 9, let ucode handle it */
b43_write16(dev, B43_MMIO_GPIO_MASK,
b43_read16(dev, B43_MMIO_GPIO_MASK)
| 0x0200);
mask |= 0x0200;
set |= 0x0200;
}
- if (dev->dev->core_rev >= 2)
- mask |= 0x0010; /* FIXME: This is redundant. */
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL,
(bcma_cc_read32(&dev->dev->bdev->bus->drv_cc,
- BCMA_CC_GPIOCTL) & mask) | set);
+ BCMA_CC_GPIOCTL) & ~mask) | set);
break;
#endif
#ifdef CONFIG_B43_SSB
@@ -2753,7 +2758,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
if (gpiodev)
ssb_write32(gpiodev, B43_GPIO_CONTROL,
(ssb_read32(gpiodev, B43_GPIO_CONTROL)
- & mask) | set);
+ & ~mask) | set);
break;
#endif
}
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
