Hi all, After applying this 2 patches I got the following eeprom read on an Wistron CM9: [ 38.880000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[0].freq = 4920, rate[0].target_power_6to24 = 36, rate[0].target_power_36 = 32, rate[0].target_power_48 = 28, rate[0].target_power_54 = 24 [ 38.896000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[1].freq = 5040, rate[1].target_power_6to24 = 36, rate[1].target_power_36 = 32, rate[1].target_power_48 = 28, rate[1].target_power_54 = 24 [ 38.916000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[2].freq = 5170, rate[2].target_power_6to24 = 36, rate[2].target_power_36 = 32, rate[2].target_power_48 = 30, rate[2].target_power_54 = 26 [ 38.936000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[3].freq = 5240, rate[3].target_power_6to24 = 38, rate[3].target_power_36 = 34, rate[3].target_power_48 = 30, rate[3].target_power_54 = 26 [ 38.952000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[4].freq = 5320, rate[4].target_power_6to24 = 38, rate[4].target_power_36 = 34, rate[4].target_power_48 = 30, rate[4].target_power_54 = 26 [ 38.972000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[5].freq = 5500, rate[5].target_power_6to24 = 38, rate[5].target_power_36 = 32, rate[5].target_power_48 = 28, rate[5].target_power_54 = 26 [ 38.992000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[6].freq = 5700, rate[6].target_power_6to24 = 36, rate[6].target_power_36 = 32, rate[6].target_power_48 = 28, rate[6].target_power_54 = 26 [ 39.012000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[7].freq = 5825, rate[7].target_power_6to24 = 34, rate[7].target_power_36 = 30, rate[7].target_power_48 = 26, rate[7].target_power_54 = 24 [ 39.036000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[0].freq = 2412, rate[0].target_power_6to24 = 39, rate[0].target_power_36 = 39, rate[0].target_power_48 = 39, rate[0].target_power_54 = 39 [ 39.056000] ath5k: phy0: [bluse ath5k_eeprom] rate_pcal_info[1].freq = 2484, rate[1].target_power_6to24 = 38, rate[1].target_power_36 = 38, rate[1].target_power_48 = 38, rate[1].target_power_54 = 38 The 5 GHz values look ok for me, but is the 2,4 GHz amp really that linear to support all powers at all rates ? Greetings Thomas -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
