This patch is going to fix the resuming failed from S3/S4 for rt3290 chip. Signed-off-by: Chen, Chien-Chia <machen@xxxxxxxx> CC-by: Kevin Chou <kevin.chou@xxxxxxxxxxxx> --- diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index e76f03c..1715776 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -400,6 +400,13 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, { unsigned int i; u32 reg; + int retval; + + if (rt2x00_rt(rt2x00dev,RT3290)){ + retval = rt2800_enable_wlan_rt3290(rt2x00dev); + if (retval) + return -EBUSY; + } /* * If driver doesn't wake up firmware here, @@ -5152,6 +5159,65 @@ int rt2800_get_survey(struct ieee80211_hw *hw, int idx, } EXPORT_SYMBOL_GPL(rt2800_get_survey); +int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + int i, count; + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); + if ((rt2x00_get_field32(reg, WLAN_EN) == 1)) + return 0; + + rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); + rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); + rt2x00_set_field32(®, WLAN_CLK_EN, 0); + rt2x00_set_field32(®, WLAN_EN, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + + udelay(REGISTER_BUSY_DELAY); + count = 0; + do { + /* + * Check PLL_LD & XTAL_RDY. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, CMB_CTRL, ®); + if ((rt2x00_get_field32(reg, PLL_LD) == 1) && + (rt2x00_get_field32(reg, XTAL_RDY) == 1)) + break; + udelay(REGISTER_BUSY_DELAY); + } + if (i >= REGISTER_BUSY_COUNT) { + if (count >= 10) + return -EIO; + + rt2800_register_write(rt2x00dev, 0x58, 0x018); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x418); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x618); + udelay(REGISTER_BUSY_DELAY); + count++; + } else { + count = 0; + } + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); + rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); + rt2x00_set_field32(®, WLAN_CLK_EN, 1); + rt2x00_set_field32(®, WLAN_RESET, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2x00_set_field32(®, WLAN_RESET, 0); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); + } while (count != 0); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_enable_wlan_rt3290); + MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz"); MODULE_VERSION(DRV_VERSION); MODULE_DESCRIPTION("Ralink RT2800 library"); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 18a0b67..12d6eeb 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -209,5 +209,5 @@ int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int rt2800_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey); void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev); - +int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev); #endif /* RT2800LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 235376e..b7a02bf 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -980,66 +980,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - int i, count; - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - if (rt2x00_get_field32(reg, WLAN_EN)) - return 0; - - rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); - rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); - rt2x00_set_field32(®, WLAN_CLK_EN, 0); - rt2x00_set_field32(®, WLAN_EN, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - - udelay(REGISTER_BUSY_DELAY); - - count = 0; - do { - /* - * Check PLL_LD & XTAL_RDY. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, CMB_CTRL, ®); - if (rt2x00_get_field32(reg, PLL_LD) && - rt2x00_get_field32(reg, XTAL_RDY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - if (i >= REGISTER_BUSY_COUNT) { - - if (count >= 10) - return -EIO; - - rt2800_register_write(rt2x00dev, 0x58, 0x018); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x418); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x618); - udelay(REGISTER_BUSY_DELAY); - count++; - } else { - count = 0; - } - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); - rt2x00_set_field32(®, WLAN_CLK_EN, 1); - rt2x00_set_field32(®, WLAN_RESET, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2x00_set_field32(®, WLAN_RESET, 0); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); - } while (count != 0); - - return 0; -} static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html