From: Yoni Divinsky <yoni.divinsky@xxxxxx> wlcore needs to wait for certain events for example for roc complete event. Usually the events are received from the FW very fast, therefore wlcore can poll with a short delay and if after a second the event was not received yet poll with a long (1-5 msec) delay. This implementation is similar to the sending of commands to the FW. Empirically the change reduced the wait for roc event from ~10-40msec to 100s of usecs. [replace udelay/msleep with usleep_range - Arik] Signed-off-by: Yoni Divinsky <yoni.divinsky@xxxxxx> Signed-off-by: Arik Nemtsov <arik@xxxxxxxxxx> --- drivers/net/wireless/ti/wlcore/cmd.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 087cb01..a23949c 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -39,6 +39,7 @@ #include "hw_ops.h" #define WL1271_CMD_FAST_POLL_COUNT 50 +#define WL1271_WAIT_EVENT_FAST_POLL_COUNT 20 /* * send command to firmware @@ -138,6 +139,7 @@ static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, u32 *events_vector; u32 event; unsigned long timeout_time; + u16 poll_count = 0; int ret = 0; *timeout = false; @@ -156,7 +158,11 @@ static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, goto out; } - msleep(1); + poll_count++; + if (poll_count < WL1271_WAIT_EVENT_FAST_POLL_COUNT) + usleep_range(50, 51); + else + usleep_range(1000, 5000); /* read from both event fields */ ret = wlcore_read(wl, wl->mbox_ptr[0], events_vector, -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
