Search Linux Wireless

Re: [PATCH v2 00/18] brcmsmac: update to get SoCs working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 03, 2012 at 09:13:13AM +0200, Arend van Spriel wrote:
> On 06/30/2012 03:16 PM, Hauke Mehrtens wrote:
> > This series contains some patches needed to get brcmsmac working on 
> > SoCs like the BCM4718.
> > The last part which adds core rev 17 (used in the BCM4718) to the list 
> > of supported cores is missing, because we do not have a firmware 
> > supporting this core yet, but I extended the b43 fwcutter to generate 
> > a firmware which brcmsmac accepts. With this firmware my BCM4718 
> > works. I would appreciate an official firmware release from Broadcom 
> > adding support for this core.
> > The final patch adding support for the BCM43224 is missing because 
> > the PCIe host controller on the BCM4718 still causes problems and I 
> > have to add some more read after writes into the code, for now it uses 
> > an ugly hack and sometimes the problems still occur.
> > 
> > The wifi is not stable on the BCM4718, I had no problems connecting to 
> > my ath9k driven access point but I have problems connecting to my 
> > BCM47186 based AP running the vendor firmware with the Broadcom 
> > proprietary driver.
> > I get 12MBit/s max with the BCM4718 connected to ath9k on the 2.4 GHz 
> > band and 35 MBit/s max with the BCM43224 on the 5Ghz band connected to 
> > a Broadcom based AP running the proprietary driver. This seams to be 
> > CPU bounced as I have over 50% sirq in both cases.
> > 
> > brcmsmac starts on the BCM47186 (id: 0x5357), but it does not tx or rx 
> > any traffic.
> > 
> > One patch extends the xmtfifo_sz array for more core revs, I just toke 
> > the values from the other phy-n cores and hope this is correct.
> > 
> > These patches are depending on: "[PATCH v2 0/9] bcma misc updates" and 
> > based on wireless-testing.
> > 
> > I will send a patch for bcma which converts the warning message when it 
> > found a PCI and not a PCIe card into a WARN.
> > 
> > v2:
> >   - when something depends on a patch for bcma, which is not in 
> >     wireless-testing yet, I add that to the commit comment.
> >   - removed changes for BCM43421 and BCM6362 as I do not have a device
> >     to test this.
> >   - xmtfifo_sz now starts at core rev 17 and contains the correct values 
> >     for core rev 28
> >   - make brcms_c_chipmatch() also work for SoCs
> >   - typos and format changes
> > 
> 
> I have acked all patches, but would like to do some sanity testing today.

Have you had a chance to do this testing?  Are you OK with this series?

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@xxxxxxxxxxxxx			might be all we have.  Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux