60g band uses different from .11n MCS scheme, so bitrate should be calculated
differently
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@xxxxxxxxxxxxxxxx>
---
include/net/cfg80211.h | 2 ++
net/wireless/util.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 51 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 56e840d..f760520 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -563,11 +563,13 @@ enum station_info_flags {
* @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
* @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
* @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
+ * @RATE_INFO_FLAGS_60G: 60gHz MCS
*/
enum rate_info_flags {
RATE_INFO_FLAGS_MCS = 1<<0,
RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1,
RATE_INFO_FLAGS_SHORT_GI = 1<<2,
+ RATE_INFO_FLAGS_60G = 1<<3,
};
/**
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 11188c6..4fe1766 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -890,12 +890,61 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
return err;
}
+static u16 cfg80211_calculate_bitrate_60g(struct rate_info *rate)
+{
+ static const u16 __mcs2bitrate[] = {
+ /* control PHY */
+ [0] = 275,
+ /* SC PHY */
+ [1] = 3850,
+ [2] = 7700,
+ [3] = 9625,
+ [4] = 11550,
+ [5] = 12512, /* 1251.25 mbps */
+ [6] = 15400,
+ [7] = 19250,
+ [8] = 23100,
+ [9] = 25025,
+ [10] = 30800,
+ [11] = 38500,
+ [12] = 46200,
+ /* OFDM PHY */
+ [13] = 6930,
+ [14] = 8662, /* 866.25 mbps */
+ [15] = 13860,
+ [16] = 17325,
+ [17] = 20790,
+ [18] = 27720,
+ [19] = 34650,
+ [20] = 41580,
+ [21] = 45045,
+ [22] = 51975,
+ [23] = 62370,
+ [24] = 67568, /* 6756.75 mbps */
+ /* LP-SC PHY */
+ [25] = 6260,
+ [26] = 8340,
+ [27] = 11120,
+ [28] = 12510,
+ [29] = 16680,
+ [30] = 22240,
+ [31] = 25030,
+ };
+
+ if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate)))
+ return 0;
+
+ return __mcs2bitrate[rate->mcs];
+}
+
u16 cfg80211_calculate_bitrate(struct rate_info *rate)
{
int modulation, streams, bitrate;
if (!(rate->flags & RATE_INFO_FLAGS_MCS))
return rate->legacy;
+ if (rate->flags & RATE_INFO_FLAGS_60G)
+ return cfg80211_calculate_bitrate_60g(rate);
/* the formula below does only work for MCS values smaller than 32 */
if (WARN_ON_ONCE(rate->mcs >= 32))
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
