On full reset, mci reset will put LNA update on 2G mode. And
Whenever 2g5g_switch is forced at the end of full reset, lna
update should not be skipped. Not doing so, is affecting WLAN
rx and causing beacon loss when BTCOEX is enabled on AR9462.
Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 6155837..9a34fca 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1015,12 +1015,9 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
return;
if (mci->is_2g) {
- if (!force) {
- ar9003_mci_send_2g5g_status(ah, true);
-
- ar9003_mci_send_lna_transfer(ah, true);
- udelay(5);
- }
+ ar9003_mci_send_2g5g_status(ah, true);
+ ar9003_mci_send_lna_transfer(ah, true);
+ udelay(5);
REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
@@ -1030,10 +1027,8 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
ar9003_mci_osla_setup(ah, true);
} else {
- if (!force) {
- ar9003_mci_send_lna_take(ah, true);
- udelay(5);
- }
+ ar9003_mci_send_lna_take(ah, true);
+ udelay(5);
REG_SET_BIT(ah, AR_MCI_TX_CTRL,
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
@@ -1041,8 +1036,7 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
ar9003_mci_osla_setup(ah, false);
- if (!force)
- ar9003_mci_send_2g5g_status(ah, true);
+ ar9003_mci_send_2g5g_status(ah, true);
}
}
--
1.7.11.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
