Search Linux Wireless

[PATCH 2/5] ath9k_hw: do not load noise floor readings when it is running

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Noise floor calibration is performed on longcal interval and
the reading will be updated in history buffer. On rare occasions,
the previous noisefloor calibration might not be completed within
the period and trying to load nf reading will be failed. In such
situation, postpone the nf cabliration to next cycle to give
enough time to complete the calibration. This was already taken
care for ar9002 chips.

Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index d7deb8c..84b558d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -159,14 +159,11 @@ static bool ar9003_hw_calibrate(struct ath_hw *ah,
 		}
 	}
 
-	/* Do NF cal only at longer intervals */
-	if (longcal) {
-		/*
-		 * Get the value from the previous NF cal and update
-		 * history buffer.
-		 */
-		ath9k_hw_getnf(ah, chan);
-
+	/*
+	 * Do NF cal only at longer intervals. Get the value from
+	 * the previous NF cal and update history buffer.
+	 */
+	if (longcal && ath9k_hw_getnf(ah, chan)) {
 		/*
 		 * Load the NF from history buffer of the current channel.
 		 * NF is slow time-variant, so it is OK to use a historical
-- 
1.7.11.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux