On 06/28/2012 03:59 PM, Jon Hunter wrote:
On 06/28/2012 05:53 PM, Franky Lin wrote:
I found one interesting thing. When I added the print info to see when
runtime_suspend/resume get called, it seems like the suspend/resume is
unbalance during boot. Resume got called more than suspend. So I hack
the code to make sure suspend and resume are called in pair. A resume
without suspend will do nothing and return immediately. This also makes
the hang vanish.
I am not 100% sure I follow. On boot I would expect to see a
resume/suspend due to the probe on the irq bank and then I would expect
to see another resume from the acquisition of the gpio, however, I would
not expect a suspend until the gpio is freed, which I don't believe you
are doing.
Can you share your hack? Just paste the diff? This may help me
understand more.
OK.
This is what I saw in the log:
[ 0.171844] dummy:
[ 0.172912] NET: Registered protocol family 16
[ 0.173431] GPMC revision 6.0
[ 0.173492] gpmc: irq-52 could not claim: err -22
[ 0.177551] ??????omap_gpio_runtime_resume
[ 0.178619] OMAP GPIO hardware version 0.1
[ 0.178649] !!!!!omap_gpio_runtime_suspend
[ 0.178771] ??????omap_gpio_runtime_resume
[ 0.179351] !!!!!omap_gpio_runtime_suspend
[ 0.179504] ??????omap_gpio_runtime_resume
[ 0.180023] !!!!!omap_gpio_runtime_suspend
[ 0.180145] ??????omap_gpio_runtime_resume
[ 0.180694] !!!!!omap_gpio_runtime_suspend
[ 0.180847] ??????omap_gpio_runtime_resume
[ 0.181365] !!!!!omap_gpio_runtime_suspend
[ 0.181518] ??????omap_gpio_runtime_resume
[ 0.182037] !!!!!omap_gpio_runtime_suspend
[ 0.185089] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.186462] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.186584] error setting wl12xx data: -38
[ 0.189788] _omap_mux_get_by_name: Could not find signal
uart1_rx.uart1_rx
[ 0.189788] _omap_mux_get_by_name: Could not find signal
uart1_rx.uart1_rx
[ 0.239501] ??????omap_gpio_runtime_resume
[ 0.239532] ??????omap_gpio_runtime_resume
[ 0.241058] usbhs_omap: alias fck already exists
[ 0.244781] ??????omap_gpio_runtime_resume
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index c4ed172..bca3985 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1146,7 +1146,7 @@ static int __devinit omap_gpio_probe(struct
platform_device *pdev)
#if defined(CONFIG_PM_RUNTIME)
static void omap_gpio_restore_context(struct gpio_bank *bank);
-
+static int flag = 0;
static int omap_gpio_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -1155,6 +1155,8 @@ static int omap_gpio_runtime_suspend(struct device
*dev)
unsigned long flags;
u32 wake_low, wake_hi;
+ flag ++;
+
spin_lock_irqsave(&bank->lock, flags);
/*
@@ -1221,6 +1223,11 @@ static int omap_gpio_runtime_resume(struct device
*dev)
u32 l = 0, gen, gen0, gen1;
unsigned long flags;
+ if (flag)
+ flag--;
+ else
+ return 0;
+
spin_lock_irqsave(&bank->lock, flags);
_gpio_dbck_enable(bank);
Regards,
Franky
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
