From: Franky Lin <frankyl@xxxxxxxxxxxx> txglomming alignment is a SDIO bus specific feature. It is more appropriate to place it in SDIO bus layer instead of common layer. Reviewed-by: Arend van Spriel <arend@xxxxxxxxxxxx> Signed-off-by: Franky Lin <frankyl@xxxxxxxxxxxx> --- .../net/wireless/brcm80211/brcmfmac/dhd_common.c | 7 ------- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 21 ++++++++++++++------ 2 files changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index 40fa472..2621dd3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -800,7 +800,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) char iovbuf[BRCMF_EVENTING_MASK_LEN + 12]; /* Room for "event_msgs" + '\0' + bitvec */ char buf[128], *ptr; - u32 dongle_align = drvr->bus_if->align; u32 roaming = 1; uint bcn_timeout = 3; int scan_assoc_time = 40; @@ -828,12 +827,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) /* Print fw version info */ brcmf_dbg(ERROR, "Firmware version = %s\n", buf); - /* Match Host and Dongle rx alignment */ - brcmf_c_mkiovar("bus:txglomalign", (char *)&dongle_align, 4, iovbuf, - sizeof(iovbuf)); - brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, - sizeof(iovbuf)); - /* Setup timeout if Beacons are lost and roam is off to report link down */ brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 1616c14..581e7d9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -4171,6 +4171,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) struct brcmf_sdio *bus; struct brcmf_bus_dcmd *dlst; u32 dngl_txglom; + u32 dngl_txglomalign; u8 idx; brcmf_dbg(TRACE, "Enter\n"); @@ -4260,12 +4261,20 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) /* sdio bus core specific dcmd */ idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); dlst = kzalloc(sizeof(struct brcmf_bus_dcmd), GFP_KERNEL); - if (bus->ci->c_inf[idx].rev < 12 && dlst) { - /* for sdio core rev < 12, disable txgloming */ - dngl_txglom = 0; - dlst->name = "bus:txglom"; - dlst->param = (char *)&dngl_txglom; - dlst->param_len = sizeof(u32); + if (dlst) { + if (bus->ci->c_inf[idx].rev < 12) { + /* for sdio core rev < 12, disable txgloming */ + dngl_txglom = 0; + dlst->name = "bus:txglom"; + dlst->param = (char *)&dngl_txglom; + dlst->param_len = sizeof(u32); + } else { + /* otherwise, set txglomalign */ + dngl_txglomalign = bus->sdiodev->bus_if->align; + dlst->name = "bus:txglomalign"; + dlst->param = (char *)&dngl_txglomalign; + dlst->param_len = sizeof(u32); + } list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list); } -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html