Configure CWmin based on slot time for IBSS mode. This helps in increasing the beacon distribution of ath9k to accepted levels in 11a mode. Signed-off-by: Vivek Natarajan <nataraja@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/beacon.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 11bc55e..70b8025 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -48,7 +48,10 @@ int ath_beaconq_config(struct ath_softc *sc) txq = sc->tx.txq_map[WME_AC_BE]; ath9k_hw_get_txq_props(ah, txq->axq_qnum, &qi_be); qi.tqi_aifs = qi_be.tqi_aifs; - qi.tqi_cwmin = 4*qi_be.tqi_cwmin; + if (ah->slottime == ATH9K_SLOT_TIME_20) + qi.tqi_cwmin = 2*qi_be.tqi_cwmin; + else + qi.tqi_cwmin = 4*qi_be.tqi_cwmin; qi.tqi_cwmax = qi_be.tqi_cwmax; } -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
