mac80211's IEEE80211_CONF_OFFCHANNEL can be used directly
to track offchannel state. Also pass the correct boolean
value to ath9k_hw_startpcureceive().
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 15 +++++++--------
drivers/net/wireless/ath/ath9k/main.c | 11 +++--------
drivers/net/wireless/ath/ath9k/recv.c | 4 ++--
3 files changed, 12 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 70504b7..9400579 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -586,14 +586,13 @@ struct ath_ant_comb {
#define SC_OP_INVALID BIT(0)
#define SC_OP_BEACONS BIT(1)
-#define SC_OP_OFFCHANNEL BIT(2)
-#define SC_OP_RXFLUSH BIT(3)
-#define SC_OP_TSF_RESET BIT(4)
-#define SC_OP_BT_PRIORITY_DETECTED BIT(5)
-#define SC_OP_BT_SCAN BIT(6)
-#define SC_OP_ANI_RUN BIT(7)
-#define SC_OP_PRIM_STA_VIF BIT(8)
-#define SC_OP_HW_RESET BIT(9)
+#define SC_OP_RXFLUSH BIT(2)
+#define SC_OP_TSF_RESET BIT(3)
+#define SC_OP_BT_PRIORITY_DETECTED BIT(4)
+#define SC_OP_BT_SCAN BIT(5)
+#define SC_OP_ANI_RUN BIT(6)
+#define SC_OP_PRIM_STA_VIF BIT(7)
+#define SC_OP_HW_RESET BIT(8)
/* Powersave flags */
#define PS_WAIT_FOR_BEACON BIT(0)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 672aefe..02a8010 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -152,7 +152,7 @@ void ath_start_ani(struct ath_common *common)
if (!(sc->sc_flags & SC_OP_ANI_RUN))
return;
- if (sc->sc_flags & SC_OP_OFFCHANNEL)
+ if (sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
return;
common->ani.longcal_timer = timestamp;
@@ -282,7 +282,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start)
ath9k_hw_set_interrupts(ah);
ath9k_hw_enable_interrupts(ah);
- if (!(sc->sc_flags & (SC_OP_OFFCHANNEL)) && start) {
+ if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) && start) {
if (sc->sc_flags & SC_OP_BEACONS)
ath_set_beacon(sc);
@@ -332,7 +332,7 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan,
spin_lock_bh(&sc->sc_pcu_lock);
- if (!(sc->sc_flags & SC_OP_OFFCHANNEL)) {
+ if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) {
fastcc = false;
caldata = &sc->caldata;
}
@@ -1639,11 +1639,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
if (ah->curchan)
old_pos = ah->curchan - &ah->channels[0];
- if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
- sc->sc_flags |= SC_OP_OFFCHANNEL;
- else
- sc->sc_flags &= ~SC_OP_OFFCHANNEL;
-
ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n",
curchan->center_freq, conf->channel_type);
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 544e549..7fa1e01 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -303,7 +303,7 @@ static void ath_edma_start_recv(struct ath_softc *sc)
ath_opmode_init(sc);
- ath9k_hw_startpcureceive(sc->sc_ah, (sc->sc_flags & SC_OP_OFFCHANNEL));
+ ath9k_hw_startpcureceive(sc->sc_ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL));
spin_unlock_bh(&sc->rx.rxbuflock);
}
@@ -500,7 +500,7 @@ int ath_startrecv(struct ath_softc *sc)
start_recv:
ath_opmode_init(sc);
- ath9k_hw_startpcureceive(ah, (sc->sc_flags & SC_OP_OFFCHANNEL));
+ ath9k_hw_startpcureceive(ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL));
spin_unlock_bh(&sc->rx.rxbuflock);
--
1.7.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
