This patch support the new chipset rt3290 wifi implementation in rt2x00.
It initailize the related mac, bbp and rf register in startup phase.
And this patch modify the efuse read/write method for the different efuse data offset of rt3290.
Signed-off-by: Woody Hung <Woody.Hung@xxxxxxxxxxxx>
---
drivers/net/wireless/rt2x00/Kconfig | 8 +
drivers/net/wireless/rt2x00/rt2800.h | 153 ++++++++++++
drivers/net/wireless/rt2x00/rt2800lib.c | 406 +++++++++++++++++++++++++++----
drivers/net/wireless/rt2x00/rt2800lib.h | 1 +
drivers/net/wireless/rt2x00/rt2800pci.c | 18 ++-
drivers/net/wireless/rt2x00/rt2800pci.h | 1 +
drivers/net/wireless/rt2x00/rt2x00.h | 2 +
drivers/net/wireless/rt2x00/rt2x00pci.c | 9 +
8 files changed, 544 insertions(+), 54 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 299c387..c7548da 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -99,6 +99,14 @@ config RT2800PCI_RT53XX
rt2800pci driver.
Supported chips: RT5390
+config RT2800PCI_RT3290
+ bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ default y
+ ---help---
+ This adds support for rt3290 wireless chipset family to the
+ rt2800pci driver.
+ Supported chips: RT3290
endif
config RT2500USB
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 9348521..7a825b3 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -67,6 +67,7 @@
#define RF3320 0x000b
#define RF3322 0x000c
#define RF3053 0x000d
+#define RF3290 0x3290
#define RF5370 0x5370
#define RF5372 0x5372
#define RF5390 0x5390
@@ -114,6 +115,12 @@
* Registers.
*/
+
+/*
+ * MAC_CSR0_3290: MAC_CSR0 for RT3290 to identity MAC version number.
+ */
+#define MAC_CSR0_3290 0x0000
+
/*
* E2PROM_CSR: PCI EEPROM control register.
* RELOAD: Write 1 to reload eeprom content.
@@ -130,6 +137,147 @@
#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
/*
+ * CMB_CTRL_CFG
+ */
+#define CMB_CTRL 0x0020
+#define AUX_OPT_BIT0 FIELD32(0x00000001)
+#define AUX_OPT_BIT1 FIELD32(0x00000002)
+#define AUX_OPT_BIT2 FIELD32(0x00000004)
+#define AUX_OPT_BIT3 FIELD32(0x00000008)
+#define AUX_OPT_BIT4 FIELD32(0x00000010)
+#define AUX_OPT_BIT5 FIELD32(0x00000020)
+#define AUX_OPT_BIT6 FIELD32(0x00000040)
+#define AUX_OPT_BIT7 FIELD32(0x00000080)
+#define AUX_OPT_BIT8 FIELD32(0x00000100)
+#define AUX_OPT_BIT9 FIELD32(0x00000200)
+#define AUX_OPT_BIT10 FIELD32(0x00000400)
+#define AUX_OPT_BIT11 FIELD32(0x00000800)
+#define AUX_OPT_BIT12 FIELD32(0x00001000)
+#define AUX_OPT_BIT13 FIELD32(0x00002000)
+#define AUX_OPT_BIT14 FIELD32(0x00004000)
+#define AUX_OPT_BIT15 FIELD32(0x00008000)
+#define LDO25_LEVEL FIELD32(0x00030000)
+#define LDO25_LARGEA FIELD32(0x00040000)
+#define LDO25_FRC_ON FIELD32(0x00080000)
+#define CMB_RSV FIELD32(0x00300000)
+#define XTAL_RDY FIELD32(0x00400000)
+#define PLL_LD FIELD32(0x00800000)
+#define LDO_CORE_LEVEL FIELD32(0x0F000000)
+#define LDO_BGSEL FIELD32(0x30000000)
+#define LDO3_EN FIELD32(0x40000000)
+#define LDO0_EN FIELD32(0x80000000)
+
+/*
+ * EFUSE_CSR_3290: RT3290 EEPROM
+ */
+#define EFUSE_CTRL_3290 0x0024
+
+/*
+ * EFUSE_DATA3 of 3290
+ */
+#define EFUSE_DATA3_3290 0x0028
+
+/*
+ * EFUSE_DATA2 of 3290
+ */
+#define EFUSE_DATA2_3290 0x002c
+
+/*
+ * EFUSE_DATA1 of 3290
+ */
+#define EFUSE_DATA1_3290 0x0030
+
+/*
+ * EFUSE_DATA0 of 3290
+ */
+#define EFUSE_DATA0_3290 0x0034
+
+/*
+ * OSC_CTRL_CFG
+ * Ring oscillator configuration
+ */
+#define OSC_CTRL 0x0038
+#define OSC_REF_CYCLE FIELD32(0x00001fff)
+#define OSC_RSV FIELD32(0x0000e000)
+#define OSC_CAL_CNT FIELD32(0x0fff0000)
+#define OSC_CAL_ACK FIELD32(0x10000000)
+#define OSC_CLK_32K_VLD FIELD32(0x20000000)
+#define OSC_CAL_REQ FIELD32(0x40000000)
+#define OSC_ROSC_EN FIELD32(0x80000000)
+
+/*
+ * COEX_CFG_0
+ */
+#define COEX_CFG0 0x0040
+#define COEX_CFG_ANT FIELD32(0xff000000)
+/*
+ * COEX_CFG_1
+ */
+#define COEX_CFG1 0x0044
+
+/*
+ * COEX_CFG_2
+ */
+#define COEX_CFG2 0x0048
+
+/*
+ * PLL_CTRL_CFG
+ * PLL configuration register
+ */
+#define PLL_CTRL 0x0050
+#define PLL_RESERVED_INPUT1 FIELD32(0x000000ff)
+#define PLL_RESERVED_INPUT2 FIELD32(0x0000ff00)
+#define PLL_CONTROL FIELD32(0x00070000)
+#define PLL_LPF_R1 FIELD32(0x00080000)
+#define PLL_LPF_C1_CTRL FIELD32(0x00300000)
+#define PLL_LPF_C2_CTRL FIELD32(0x00c00000)
+#define PLL_CP_CURRENT_CTRL FIELD32(0x03000000)
+#define PLL_PFD_DELAY_CTRL FIELD32(0x0c000000)
+#define PLL_LOCK_CTRL FIELD32(0x70000000)
+#define PLL_VBGBK_EN FIELD32(0x80000000)
+
+
+/*
+ * WLAN_CTRL_CFG
+ * RT3290 wlan configuration
+ */
+#define WLAN_FUN_CTRL 0x0080
+#define WLAN_EN FIELD32(0x00000001)
+#define WLAN_CLK_EN FIELD32(0x00000002)
+#define WLAN_RSV1 FIELD32(0x00000004)
+#define WLAN_RESET FIELD32(0x00000008)
+#define PCIE_APP0_CLK_REQ FIELD32(0x00000010)
+#define FRC_WL_ANT_SET FIELD32(0x00000020)
+#define INV_TR_SW0 FIELD32(0x00000040)
+#define WLAN_GPIO_IN_BIT0 FIELD32(0x00000100)
+#define WLAN_GPIO_IN_BIT1 FIELD32(0x00000200)
+#define WLAN_GPIO_IN_BIT2 FIELD32(0x00000400)
+#define WLAN_GPIO_IN_BIT3 FIELD32(0x00000800)
+#define WLAN_GPIO_IN_BIT4 FIELD32(0x00001000)
+#define WLAN_GPIO_IN_BIT5 FIELD32(0x00002000)
+#define WLAN_GPIO_IN_BIT6 FIELD32(0x00004000)
+#define WLAN_GPIO_IN_BIT7 FIELD32(0x00008000)
+#define WLAN_GPIO_IN_BIT_ALL FIELD32(0x0000ff00)
+#define WLAN_GPIO_OUT_BIT0 FIELD32(0x00010000)
+#define WLAN_GPIO_OUT_BIT1 FIELD32(0x00020000)
+#define WLAN_GPIO_OUT_BIT2 FIELD32(0x00040000)
+#define WLAN_GPIO_OUT_BIT3 FIELD32(0x00050000)
+#define WLAN_GPIO_OUT_BIT4 FIELD32(0x00100000)
+#define WLAN_GPIO_OUT_BIT5 FIELD32(0x00200000)
+#define WLAN_GPIO_OUT_BIT6 FIELD32(0x00400000)
+#define WLAN_GPIO_OUT_BIT7 FIELD32(0x00800000)
+#define WLAN_GPIO_OUT_BIT_ALL FIELD32(0x00ff0000)
+#define WLAN_GPIO_OUT_OE_BIT0 FIELD32(0x01000000)
+#define WLAN_GPIO_OUT_OE_BIT1 FIELD32(0x02000000)
+#define WLAN_GPIO_OUT_OE_BIT2 FIELD32(0x04000000)
+#define WLAN_GPIO_OUT_OE_BIT3 FIELD32(0x08000000)
+#define WLAN_GPIO_OUT_OE_BIT4 FIELD32(0x10000000)
+#define WLAN_GPIO_OUT_OE_BIT5 FIELD32(0x20000000)
+#define WLAN_GPIO_OUT_OE_BIT6 FIELD32(0x40000000)
+#define WLAN_GPIO_OUT_OE_BIT7 FIELD32(0x80000000)
+#define WLAN_GPIO_OUT_OE_BIT_ALL FIELD32(0xff000000)
+
+/*
* AUX_CTRL: Aux/PCI-E related configuration
*/
#define AUX_CTRL 0x10c
@@ -1914,6 +2062,11 @@ struct mac_iveiv_entry {
#define RFCSR27_R4 FIELD8(0x40)
/*
+ * RFCSR 29:
+ */
+#define RFCSR27_ADC FIELD8(0xc0)
+
+/*
* RFCSR 30:
*/
#define RFCSR30_TX_H20M FIELD8(0x02)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index dfc90d3..2368cb2 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -354,16 +354,15 @@ int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
* of 4kb. Certain USB chipsets however require different firmware,
* which Ralink only provides attached to the original firmware
* file. Thus for USB devices, firmware files have a length
- * which is a multiple of 4kb.
+ * which is a multiple of 4kb. The firmware for rt3290 chip also
+ * have a length which is a multiple of 4kb.
*/
- if (rt2x00_is_usb(rt2x00dev)) {
+ if (rt2x00_is_usb(rt2x00dev) || rt2x00_rt(rt2x00dev, RT3290))
fw_len = 4096;
- multiple = true;
- } else {
+ else
fw_len = 8192;
- multiple = true;
- }
+ multiple = true;
/*
* Validate the firmware length
*/
@@ -415,7 +414,8 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
return -EBUSY;
if (rt2x00_is_pci(rt2x00dev)) {
- if (rt2x00_rt(rt2x00dev, RT3572) ||
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT3572) ||
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_register_read(rt2x00dev, AUX_CTRL, ®);
@@ -851,8 +851,13 @@ int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
- rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
- return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+ if (rt2x00_rt(rt2x00dev, RT3290)) {
+ rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®);
+ return rt2x00_get_field32(reg, WLAN_GPIO_IN_BIT0);
+ } else {
+ rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
+ return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+ }
}
EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
@@ -1935,8 +1940,50 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
}
-#define RT5390_POWER_BOUND 0x27
-#define RT5390_FREQ_OFFSET_BOUND 0x5f
+#define POWER_BOUND 0x27
+#define FREQ_OFFSET_BOUND 0x5f
+
+static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ u8 rfcsr;
+
+ rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
+ rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
+ rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2);
+ rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr);
+ if (info->default_power1 > POWER_BOUND)
+ rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
+ rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
+ if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND)
+ rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
+ rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
+
+ if (rf->channel <= 14) {
+ if (rf->channel == 6)
+ rt2800_bbp_write(rt2x00dev, 68, 0x0c);
+ else
+ rt2800_bbp_write(rt2x00dev, 68, 0x0b);
+
+ if (rf->channel >= 1 && rf->channel <= 6)
+ rt2800_bbp_write(rt2x00dev, 59, 0x0f);
+ else if (rf->channel >= 7 && rf->channel <= 11)
+ rt2800_bbp_write(rt2x00dev, 59, 0x0e);
+ else if (rf->channel >= 12 && rf->channel <= 14)
+ rt2800_bbp_write(rt2x00dev, 59, 0x0d);
+ }
+}
static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
@@ -1952,8 +1999,8 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr);
- if (info->default_power1 > RT5390_POWER_BOUND)
- rt2x00_set_field8(&rfcsr, RFCSR49_TX, RT5390_POWER_BOUND);
+ if (info->default_power1 > POWER_BOUND)
+ rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND);
else
rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
@@ -1966,9 +2013,8 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
- if (rt2x00dev->freq_offset > RT5390_FREQ_OFFSET_BOUND)
- rt2x00_set_field8(&rfcsr, RFCSR17_CODE,
- RT5390_FREQ_OFFSET_BOUND);
+ if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND)
+ rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND);
else
rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
@@ -2021,15 +2067,6 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
}
}
}
-
- rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, 0);
- rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, 0);
- rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
-
- rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
- rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
}
static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
@@ -2039,7 +2076,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
{
u32 reg;
unsigned int tx_pin;
- u8 bbp;
+ u8 bbp, rfcsr;
if (rf->channel <= 14) {
info->default_power1 = TXPOWER_G_TO_DEV(info->default_power1);
@@ -2060,6 +2097,9 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
case RF3052:
rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
break;
+ case RF3290:
+ rt2800_config_channel_rf3290(rt2x00dev, conf, rf, info);
+ break;
case RF5370:
case RF5372:
case RF5390:
@@ -2069,6 +2109,20 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
}
+ if (rt2x00dev->chip.rf == RF3290 ||
+ rt2x00dev->chip.rf == RF5370 ||
+ rt2x00dev->chip.rf == RF5372 ||
+ rt2x00dev->chip.rf == RF5390) {
+ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, 0);
+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
+ }
+
/*
* Change BBP settings
*/
@@ -2549,6 +2603,7 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
break;
+ case RF3290:
case RF5370:
case RF5372:
case RF5390:
@@ -2682,6 +2737,7 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
if (rt2x00_rt(rt2x00dev, RT3070) ||
rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090) ||
+ rt2x00_rt(rt2x00dev, RT3290) ||
rt2x00_rt(rt2x00dev, RT3390) ||
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
@@ -2778,10 +2834,50 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+ if (rt2x00_rt(rt2x00dev, RT3290)) {
+ rt2800_enable_wlan_rt3290(rt2x00dev);
+ rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®);
+ if (rt2x00_get_field32(reg, WLAN_EN) == 1) {
+ rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 1);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+ }
+
+ rt2800_register_read(rt2x00dev, CMB_CTRL, ®);
+ if (!(rt2x00_get_field32(reg, LDO0_EN) == 1)) {
+ rt2x00_set_field32(®, LDO0_EN, 1);
+ rt2x00_set_field32(®, LDO_BGSEL, 3);
+ rt2800_register_write(rt2x00dev, CMB_CTRL, reg);
+ }
+
+ rt2800_register_read(rt2x00dev, OSC_CTRL, ®);
+ rt2x00_set_field32(®, OSC_ROSC_EN, 1);
+ rt2800_register_write(rt2x00dev, OSC_CTRL, reg);
+ rt2x00_set_field32(®, OSC_ROSC_EN, 1);
+ rt2x00_set_field32(®, OSC_CAL_REQ, 1);
+ rt2x00_set_field32(®, OSC_REF_CYCLE, 0x27);
+ rt2800_register_write(rt2x00dev, OSC_CTRL, reg);
+ rt2800_register_read(rt2x00dev, COEX_CFG0, ®);
+ rt2x00_set_field32(®, COEX_CFG_ANT, 0);
+ rt2x00_set_field32(®, COEX_CFG_ANT, 0x5e);
+ rt2800_register_write(rt2x00dev, COEX_CFG0, reg);
+ rt2800_register_write(rt2x00dev, COEX_CFG2, 0x0017937F);
+ rt2800_register_read(rt2x00dev, PLL_CTRL, ®);
+ rt2x00_set_field32(®, PLL_CONTROL, 1);
+ rt2800_register_write(rt2x00dev, PLL_CTRL, reg);
+ }
+
if (rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090) ||
- rt2x00_rt(rt2x00dev, RT3390)) {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
+ rt2x00_rt(rt2x00dev, RT3390) ||
+ rt2x00_rt(rt2x00dev, RT3290)) {
+
+ if (rt2x00_rt(rt2x00dev, RT3290))
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0,
+ 0x00000404);
+ else
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0,
+ 0x00000400);
+
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
@@ -3190,7 +3286,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_wait_bbp_ready(rt2x00dev)))
return -EACCES;
- if (rt2x00_rt(rt2x00dev, RT5390) ||
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_bbp_read(rt2x00dev, 4, &value);
rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
@@ -3198,6 +3295,7 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
}
if (rt2800_is_305x_soc(rt2x00dev) ||
+ rt2x00_rt(rt2x00dev, RT3290) ||
rt2x00_rt(rt2x00dev, RT3572) ||
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
@@ -3206,20 +3304,26 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
rt2800_bbp_write(rt2x00dev, 66, 0x38);
- if (rt2x00_rt(rt2x00dev, RT5390) ||
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 68, 0x0b);
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
rt2800_bbp_write(rt2x00dev, 69, 0x16);
rt2800_bbp_write(rt2x00dev, 73, 0x12);
- } else if (rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392)) {
+ } else if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_bbp_write(rt2x00dev, 69, 0x12);
rt2800_bbp_write(rt2x00dev, 73, 0x13);
rt2800_bbp_write(rt2x00dev, 75, 0x46);
rt2800_bbp_write(rt2x00dev, 76, 0x28);
- rt2800_bbp_write(rt2x00dev, 77, 0x59);
+
+ if (rt2x00_rt(rt2x00dev, RT3290))
+ rt2800_bbp_write(rt2x00dev, 77, 0x58);
+ else
+ rt2800_bbp_write(rt2x00dev, 77, 0x59);
} else {
rt2800_bbp_write(rt2x00dev, 69, 0x12);
rt2800_bbp_write(rt2x00dev, 73, 0x10);
@@ -3244,8 +3348,16 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_bbp_write(rt2x00dev, 81, 0x37);
}
+ if (rt2x00_rt(rt2x00dev, RT3290)) {
+ rt2800_bbp_write(rt2x00dev, 74, 0x0b);
+ rt2800_bbp_write(rt2x00dev, 79, 0x18);
+ rt2800_bbp_write(rt2x00dev, 80, 0x09);
+ rt2800_bbp_write(rt2x00dev, 81, 0x33);
+ }
+
rt2800_bbp_write(rt2x00dev, 82, 0x62);
- if (rt2x00_rt(rt2x00dev, RT5390) ||
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 83, 0x7a);
else
@@ -3253,13 +3365,15 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D))
rt2800_bbp_write(rt2x00dev, 84, 0x19);
- else if (rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392))
+ else if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 84, 0x9a);
else
rt2800_bbp_write(rt2x00dev, 84, 0x99);
- if (rt2x00_rt(rt2x00dev, RT5390) ||
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 86, 0x38);
else
@@ -3270,7 +3384,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_bbp_write(rt2x00dev, 91, 0x04);
- if (rt2x00_rt(rt2x00dev, RT5390) ||
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 92, 0x02);
else
@@ -3285,6 +3400,7 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E) ||
rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E) ||
+ rt2x00_rt(rt2x00dev, RT3290) ||
rt2x00_rt(rt2x00dev, RT3572) ||
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392) ||
@@ -3293,26 +3409,31 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
else
rt2800_bbp_write(rt2x00dev, 103, 0x00);
- if (rt2x00_rt(rt2x00dev, RT5390) ||
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 104, 0x92);
if (rt2800_is_305x_soc(rt2x00dev))
rt2800_bbp_write(rt2x00dev, 105, 0x01);
+ else if (rt2x00_rt(rt2x00dev, RT3290))
+ rt2800_bbp_write(rt2x00dev, 105, 0x1c);
else if (rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 105, 0x3c);
else
rt2800_bbp_write(rt2x00dev, 105, 0x05);
- if (rt2x00_rt(rt2x00dev, RT5390))
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390))
rt2800_bbp_write(rt2x00dev, 106, 0x03);
else if (rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 106, 0x12);
else
rt2800_bbp_write(rt2x00dev, 106, 0x35);
- if (rt2x00_rt(rt2x00dev, RT5390) ||
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 128, 0x12);
@@ -3338,6 +3459,27 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_bbp_write(rt2x00dev, 138, value);
}
+ if (rt2x00_rt(rt2x00dev, RT3290)) {
+ rt2800_bbp_write(rt2x00dev, 67, 0x24);
+ rt2800_bbp_write(rt2x00dev, 143, 0x04);
+ rt2800_bbp_write(rt2x00dev, 142, 0x99);
+ rt2800_bbp_write(rt2x00dev, 150, 0x30);
+ rt2800_bbp_write(rt2x00dev, 151, 0x2e);
+ rt2800_bbp_write(rt2x00dev, 152, 0x20);
+ rt2800_bbp_write(rt2x00dev, 153, 0x34);
+ rt2800_bbp_write(rt2x00dev, 154, 0x40);
+ rt2800_bbp_write(rt2x00dev, 155, 0x3b);
+ rt2800_bbp_write(rt2x00dev, 253, 0x04);
+
+ rt2800_bbp_read(rt2x00dev, 47, &value);
+ rt2x00_set_field8(&value, RFCSR2_RESCAL_EN, 1);
+ rt2800_bbp_write(rt2x00dev, 47, value);
+
+ rt2800_bbp_read(rt2x00dev, 3, &value);
+ rt2x00_set_field8(&value, RFCSR7_BITS67, 1);
+ rt2800_bbp_write(rt2x00dev, 3, value);
+ }
+
if (rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392)) {
int ant, div_mode;
@@ -3470,6 +3612,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
if (!rt2x00_rt(rt2x00dev, RT3070) &&
!rt2x00_rt(rt2x00dev, RT3071) &&
!rt2x00_rt(rt2x00dev, RT3090) &&
+ !rt2x00_rt(rt2x00dev, RT3290) &&
!rt2x00_rt(rt2x00dev, RT3390) &&
!rt2x00_rt(rt2x00dev, RT3572) &&
!rt2x00_rt(rt2x00dev, RT5390) &&
@@ -3480,7 +3623,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
/*
* Init RF calibration.
*/
- if (rt2x00_rt(rt2x00dev, RT5390) ||
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
@@ -3519,6 +3663,53 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
+ } else if (rt2x00_rt(rt2x00dev, RT3290)) {
+ rt2800_rfcsr_write(rt2x00dev, 1, 0x0f);
+ rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
+ rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 6, 0xa0);
+ rt2800_rfcsr_write(rt2x00dev, 8, 0xf3);
+ rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
+ rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
+ rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
+ rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
+ rt2800_rfcsr_write(rt2x00dev, 18, 0x02);
+ rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x83);
+ rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
+ rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
+ rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 34, 0x05);
+ rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
+ rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
+ rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
+ rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
+ rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
+ rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
+ rt2800_rfcsr_write(rt2x00dev, 43, 0x7b);
+ rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
+ rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
+ rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
+ rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 49, 0x98);
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
+ rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 54, 0x78);
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
+ rt2800_rfcsr_write(rt2x00dev, 56, 0x02);
+ rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
+ rt2800_rfcsr_write(rt2x00dev, 59, 0x09);
+ rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
+ rt2800_rfcsr_write(rt2x00dev, 61, 0xc1);
} else if (rt2x00_rt(rt2x00dev, RT3390)) {
rt2800_rfcsr_write(rt2x00dev, 0, 0xa0);
rt2800_rfcsr_write(rt2x00dev, 1, 0xe1);
@@ -3927,6 +4118,12 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 27, rfcsr);
}
+ if (rt2x00_rt(rt2x00dev, RT3290)) {
+ rt2800_rfcsr_read(rt2x00dev, 29, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR27_ADC, 0xc0);
+ rt2800_rfcsr_write(rt2x00dev, 29, rfcsr);
+ }
+
if (rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr);
@@ -4033,9 +4230,18 @@ EXPORT_SYMBOL_GPL(rt2800_disable_radio);
int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
+ u16 efuse_ctrl_reg;
- rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®);
+ /*
+ * Because rt2x00dev->chip.rt set in rt2800_init_eeprom.
+ * So we can't use rt2x00_rt(rt2x00dev, RT3290) here.
+ */
+ if (rt2x00dev->chip.device_id == 0x3290)
+ efuse_ctrl_reg = EFUSE_CTRL_3290;
+ else
+ efuse_ctrl_reg = EFUSE_CTRL;
+ rt2800_register_read(rt2x00dev, efuse_ctrl_reg, ®);
return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT);
}
EXPORT_SYMBOL_GPL(rt2800_efuse_detect);
@@ -4043,27 +4249,48 @@ EXPORT_SYMBOL_GPL(rt2800_efuse_detect);
static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i)
{
u32 reg;
+ u16 efuse_ctrl_reg;
+ u16 efuse_data0_reg;
+ u16 efuse_data1_reg;
+ u16 efuse_data2_reg;
+ u16 efuse_data3_reg;
+ /*
+ * Because rt2x00dev->chip.rt set in rt2800_init_eeprom.
+ * So we can't use rt2x00_rt(rt2x00dev, RT3290) here.
+ */
+ if (rt2x00dev->chip.device_id == 0x3290) {
+ efuse_ctrl_reg = EFUSE_CTRL_3290;
+ efuse_data0_reg = EFUSE_DATA0_3290;
+ efuse_data1_reg = EFUSE_DATA1_3290;
+ efuse_data2_reg = EFUSE_DATA2_3290;
+ efuse_data3_reg = EFUSE_DATA3_3290;
+ } else {
+ efuse_ctrl_reg = EFUSE_CTRL;
+ efuse_data0_reg = EFUSE_DATA0;
+ efuse_data1_reg = EFUSE_DATA1;
+ efuse_data2_reg = EFUSE_DATA2;
+ efuse_data3_reg = EFUSE_DATA3;
+ }
mutex_lock(&rt2x00dev->csr_mutex);
- rt2800_register_read_lock(rt2x00dev, EFUSE_CTRL, ®);
+ rt2800_register_read_lock(rt2x00dev, efuse_ctrl_reg, ®);
rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i);
rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0);
rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1);
- rt2800_register_write_lock(rt2x00dev, EFUSE_CTRL, reg);
+ rt2800_register_write_lock(rt2x00dev, efuse_ctrl_reg, reg);
/* Wait until the EEPROM has been loaded */
- rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®);
-
+ rt2800_regbusy_read(rt2x00dev, efuse_ctrl_reg, EFUSE_CTRL_KICK, ®);
/* Apparently the data is read from end to start */
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, ®);
+ rt2800_register_read_lock(rt2x00dev, efuse_data3_reg, ®);
/* The returned value is in CPU order, but eeprom is le */
*(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg);
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, ®);
+ rt2800_register_read_lock(rt2x00dev, efuse_data2_reg, ®);
*(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, ®);
+ rt2800_register_read_lock(rt2x00dev, efuse_data1_reg, ®);
*(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg);
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, ®);
+ rt2800_register_read_lock(rt2x00dev, efuse_data0_reg, ®);
*(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg);
mutex_unlock(&rt2x00dev->csr_mutex);
@@ -4225,8 +4452,13 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
* RT28xx/RT30xx: defined in "EEPROM_NIC_CONF0_RF_TYPE" field
* RT53xx: defined in "EEPROM_CHIP_ID" field
*/
- rt2800_register_read(rt2x00dev, MAC_CSR0, ®);
- if (rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5390 ||
+ if (rt2x00dev->chip.device_id == 0x3290)
+ rt2800_register_read(rt2x00dev, MAC_CSR0_3290, ®);
+ else
+ rt2800_register_read(rt2x00dev, MAC_CSR0, ®);
+
+ if (rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT3290 ||
+ rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5390 ||
rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5392)
rt2x00_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &value);
else
@@ -4242,6 +4474,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
case RT3070:
case RT3071:
case RT3090:
+ case RT3290:
case RT3390:
case RT3572:
case RT5390:
@@ -4262,6 +4495,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
case RF3021:
case RF3022:
case RF3052:
+ case RF3290:
case RF3320:
case RF5370:
case RF5372:
@@ -4576,6 +4810,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_rf(rt2x00dev, RF2020) ||
rt2x00_rf(rt2x00dev, RF3021) ||
rt2x00_rf(rt2x00dev, RF3022) ||
+ rt2x00_rf(rt2x00dev, RF3290) ||
rt2x00_rf(rt2x00dev, RF3320) ||
rt2x00_rf(rt2x00dev, RF5370) ||
rt2x00_rf(rt2x00dev, RF5372) ||
@@ -4662,6 +4897,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
case RF3022:
case RF3320:
case RF3052:
+ case RF3290:
case RF5370:
case RF5372:
case RF5390:
@@ -4892,6 +5128,70 @@ int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
}
EXPORT_SYMBOL_GPL(rt2800_get_survey);
+int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
+ int i, count;
+
+ rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®);
+ rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
+ rt2x00_set_field32(®, FRC_WL_ANT_SET, 1);
+ if ((rt2x00_get_field32(reg, WLAN_EN) == 1))
+ return 0;
+
+ rt2x00_set_field32(®, WLAN_CLK_EN, 0);
+ rt2x00_set_field32(®, WLAN_EN, 1);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+ udelay(REGISTER_BUSY_DELAY);
+
+ count = 0;
+ do {
+ reg = 0;
+ /*
+ * Check PLL_LD & XTAL_RDY.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2800_register_read(rt2x00dev, CMB_CTRL, ®);
+ if ((rt2x00_get_field32(reg, PLL_LD) == 1) &&
+ (rt2x00_get_field32(reg, XTAL_RDY) == 1))
+ break;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ if (i >= REGISTER_BUSY_COUNT) {
+
+ if (count >= 10)
+ break;
+
+ rt2800_register_write(rt2x00dev, 0x58, 0x018);
+ udelay(REGISTER_BUSY_DELAY);
+ rt2800_register_write(rt2x00dev, 0x58, 0x418);
+ udelay(REGISTER_BUSY_DELAY);
+ rt2800_register_write(rt2x00dev, 0x58, 0x618);
+ udelay(REGISTER_BUSY_DELAY);
+ count++;
+ } else {
+ rt2800_register_read(rt2x00dev,
+ WPDMA_GLO_CFG, ®);
+ count = 0;
+ }
+
+ rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®);
+ rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0);
+ rt2x00_set_field32(®, WLAN_CLK_EN, 1);
+ rt2x00_set_field32(®, WLAN_RESET, 1);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+ udelay(10);
+ rt2x00_set_field32(®, WLAN_RESET, 0);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+ udelay(10);
+ rt2800_register_write(rt2x00dev,
+ INT_SOURCE_CSR, 0x7fffffff);
+ } while (count != 0);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_enable_wlan_rt3290);
MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Ralink RT2800 library");
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 18a0b67..0321fd8 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -209,5 +209,6 @@ int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev);
+int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev);
#endif /* RT2800LIB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index cad25bf..4edeb01 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -280,7 +280,13 @@ static void rt2800pci_stop_queue(struct data_queue *queue)
*/
static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
{
- return FIRMWARE_RT2860;
+ /*
+ * Chip rt3290 use specific 4KB firmware named rt3290.bin.
+ */
+ if (rt2x00_rt(rt2x00dev, RT3290))
+ return FIRMWARE_RT3290;
+ else
+ return FIRMWARE_RT2860;
}
static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev,
@@ -1028,6 +1034,13 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
*/
rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+ /*
+ * In probe phase call rt2800_enable_wlan_rt3290 to enable wlan
+ * clk for rt3290. That avoid the MCU fail in start phase.
+ */
+ if (rt2x00_rf(rt2x00dev, RF3290))
+ rt2800_enable_wlan_rt3290(rt2x00dev);
+
return 0;
}
@@ -1175,6 +1188,9 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
{ PCI_DEVICE(0x1432, 0x7768) },
{ PCI_DEVICE(0x1462, 0x891a) },
{ PCI_DEVICE(0x1a3b, 0x1059) },
+#ifdef CONFIG_RT2800PCI_RT3290
+ { PCI_DEVICE(0x1814, 0x3290) },
+#endif
#ifdef CONFIG_RT2800PCI_RT33XX
{ PCI_DEVICE(0x1814, 0x3390) },
#endif
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h
index 70e050d..ab22a08 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.h
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -47,6 +47,7 @@
* 8051 firmware image.
*/
#define FIRMWARE_RT2860 "rt2860.bin"
+#define FIRMWARE_RT3290 "rt3290.bin"
#define FIRMWARE_IMAGE_BASE 0x2000
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index ca36ccc..f2d64cb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -187,6 +187,7 @@ struct rt2x00_chip {
#define RT3070 0x3070
#define RT3071 0x3071
#define RT3090 0x3090 /* 2.4GHz PCIe */
+#define RT3290 0x3290
#define RT3390 0x3390
#define RT3572 0x3572
#define RT3593 0x3593
@@ -196,6 +197,7 @@ struct rt2x00_chip {
u16 rf;
u16 rev;
+ u16 device_id;
enum rt2x00_chip_intf intf;
};
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 0a4653a..a672f43 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -256,6 +256,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
struct ieee80211_hw *hw;
struct rt2x00_dev *rt2x00dev;
int retval;
+ u16 device_id;
retval = pci_enable_device(pci_dev);
if (retval) {
@@ -305,6 +306,14 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
if (retval)
goto exit_free_device;
+ /*
+ * Because rt3290 chip use different efuse offset to read efuse data.
+ * So before read efuse it need one parameter to indicate it is the
+ * rt3290 or not.
+ */
+ pci_read_config_word(pci_dev, PCI_DEVICE_ID, &device_id);
+ rt2x00dev->chip.device_id = device_id;
+
retval = rt2x00lib_probe_dev(rt2x00dev);
if (retval)
goto exit_free_reg;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
