Hi Arend, I got a new device, a Linksys E3200 with a BCM47186 (id: 0x5357) and a BCM43236 v2 for 5GHz wifi. The BCM47186 has a wifi core rev 28, a N-PHY rev 9 and a 2057 radio rev 5 and it does not work with brcmsmac or b43. :-( Are there plans to add support for such new N-PHY revs to brcmsmac and the firmware? Here are some parts of my log with brcmsamc with firmware from linux-firmware. bcma: Found chip with id 0x5357, rev 0x02 and package 0x0A .... bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1C, class 0x0) .... [ 14.776000] b43-phy0: Broadcom 5357 WLAN found (core revision 28) [ 14.780000] b43-phy0 debug: Found PHY: Analog 9, Type 4, Revision 9 [ 14.780000] b43-phy0 ERROR: FOUND UNSUPPORTED RADIO (Manuf 0x17F, Version 0x2057, Revision 5) [ 14.792000] b43: probe of bcma0:5 failed with error -122 [ 14.796000] Broadcom 43xx driver loaded [ Features: PNL ] [ 14.824000] Broadcom 43xx-legacy driver loaded [ Features: PLID ] ... [ 15.048000] brcmsmac bcma0:5: mfg 4bf core 812 rev 28 class 0 irq 3 [ 15.144000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' ... [ 16.212000] brcmf_usb_fw_download: unsupported chip 43236 rev 2 [ 16.212000] brcmf_usb_attach: failed! [ 16.212000] brcmf_usb_probe: failed with errno -19 ... [ 32.508000] ieee80211 phy1: wl0: wlc_coreinit: ucode did not self-suspend! [ 32.516000] ieee80211 phy1: wlc_coreinit: txfifo mismatch: ucode size 127 driver size 29535 index 5 [ 32.636000] ieee80211 phy1: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on. [ 32.644000] ieee80211 phy1: wl0: psmdebug 0x00ff8cd4, phydebug 0x00000000, psm_brc 0x0000 ... (~6 times the same two messages) [ 33.372000] ieee80211 phy1: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on. [ 33.380000] ieee80211 phy1: wl0: psmdebug 0x00ff8cd4, phydebug 0x00000000, psm_brc 0x0000 [ 33.388000] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 33.396000] ieee80211 phy1: brcms_ops_config: change monitor mode: false [ 33.396000] ieee80211 phy1: brcms_ops_config: change power-save mode: false (implement) [ 33.492000] ieee80211 phy1: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on. [ 33.500000] ieee80211 phy1: wl0: psmdebug 0x00ff8cd4, phydebug 0x00000000, psm_brc 0x0000 ... (~10 times the same two messages) [ 43.144000] ieee80211 phy1: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on. [ 43.152000] ieee80211 phy1: wl0: psmdebug 0x00ff8cd4, phydebug 0x00000001, psm_brc 0x0000 [ 51.096000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC [ 51.236000] ieee80211 phy1: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on. [ 51.244000] ieee80211 phy1: wl0: psmdebug 0x00ff8cd4, phydebug 0x00000001, psm_brc 0x0000 ... (~10 times the same two messages) [ 53.652000] ieee80211 phy1: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on. [ 53.660000] ieee80211 phy1: wl0: psmdebug 0x00ff8cd4, phydebug 0x00000000, psm_brc 0x0000 [ 53.796000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC [ 53.956000] ------------[ cut here ]------------ [ 53.960000] WARNING: at /home/hauke/kamikaze/git/build_dir/linux-brcm47xx/compat-wireless-2012-04-17/drivers/net/wireless/brcm80211/brcmsmac/main.c:7975 brcms_c_wait_for_ tx_completion+0xc4/0xe0 [brcmsmac]() [ 53.976000] Modules linked in: usb_storage brcmfmac(O) uhci_hcd ohci_hcd nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_conn track xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd sd_mod pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt _mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables msdos brcmsmac(O) ppp_async ppp_generic slhc vfat fat ext4 jbd2 mbcache brcmutil(O) b43legacy(O) b43 (O) nls_utf8 nls_koi8_r nls_iso8859_2 nls_iso8859_15 nls_iso8859_13 nls_iso8859_1 nls_cp866 nls_cp852 nls_cp850 nls_cp775 nls_cp437 nls_cp1251 nls_cp1250 mac80211(O) usbcore usb_common switch_core(O) scsi_mod nls_base crc8 crc16 crc_ccitt cordic cfg80211(O) compat(O) ssb_hcd bcma_hcd arc4 aes_generic crypto_algapi tg3 diag(O) [last unloaded: switch_core] [ 54.056000] Call Trace: [ 54.060000] [<8024ea44>] dump_stack+0x8/0x34 [ 54.064000] [<80017f80>] warn_slowpath_common+0x78/0xa4 [ 54.068000] [<80017fc4>] warn_slowpath_null+0x18/0x24 [ 54.072000] [<82e8dd1c>] brcms_c_wait_for_tx_completion+0xc4/0xe0 [brcmsmac] [ 54.080000] [<82e80194>] 0x82e80194 [ 54.084000] [ 54.084000] ---[ end trace 374ee2ec89e7f317 ]--- [ 63.292000] ieee80211 phy1: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on. [ 63.300000] ieee80211 phy1: wl0: psmdebug 0x00ff8cd4, phydebug 0x00000001, psm_brc 0x0000 ... (~10 times the same two messages) [ 193.292000] ieee80211 phy1: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on. [ 193.300000] ieee80211 phy1: wl0: psmdebug 0x00ff8cd4, phydebug 0x00000001, psm_brc 0x0000 [ 203.292000] ieee80211 phy1: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on. When using the firmware from b43 (666.2, extracted from wl 5.100.138) I get the following messages, but iw wlan0 scan does not find any networks either. [ 30.088000] ieee80211 phy1: wlc_coreinit: txfifo mismatch: ucode size 127 driver size 29535 index 5 [ 30.164000] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 30.172000] ieee80211 phy1: brcms_ops_config: change monitor mode: false [ 30.172000] ieee80211 phy1: brcms_ops_config: change power-save mode: false (implement) [ 43.976000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC [ 44.844000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC [ 48.088000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC [ 48.956000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC [ 53.448000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC [ 54.316000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC [ 76.816000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC [ 77.684000] ieee80211 phy1: FIF_BCN_PRBRESP_PROMISC Did you talk to the firmware guys, is there a limitation to core rev 23 devices in the N-PHY firmware other than in the firmware used by wl? There is also a BCM43236 V2 (usb chip) on the board. I tried brcmfmac and the firmware from linux-firmware, but it did not work. This is a rev 2 device and brcmfmac just seams to support rev 3. Are there any plans to add support for rev 2 or is this an other problem and a rev 2 device should also work with brcmfmac? Hauke -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
