On Thursday, May 17, 2012 01:19:56 AM Alex Alouit wrote: > Hello, > > I want to use an Netgear WN111v2 (AR9170 usb wireless) with Vyatta 6.4, > I copied the firmware (http://linuxwireless.org/en/users/Drivers/carl9170), > (carl9170-1.fw in /usr/local/lib/firmware version 1.9.2 (kernel 3.0.23)) > but it seems that the module doesn't load correctly the firmware. that's pretty old. you can go with compat-wireless and a more recent firmware. > > usb 1-1: new high speed USB device number 2 using ehci_hcd > usb 1-1: New USB device found, idVendor=0846, idProduct=9001 > usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 > usb 1-1: Product: USB2.0 WLAN > usb 1-1: Manufacturer: ATHER > usb 1-1: SerialNumber: 12345 > usb 1-1: reset high speed USB device number 2 using ehci_hcd > usbcore: registered new interface driver carl9170 > usb 1-1: driver API: 1.9.2 2011-01-22 [1-1] > usb 1-1: firmware API: 1.9.2 2010-12-25 > usb 1-1: firmware upload failed (-110). > > It's the module or firmware that is buggy? How can I fix this? -110 is -ETIMEDOUT (The driver hasn't received the "fw booted" event and the upload timed out). This can be caused by a faulty module, firmware, linux's usb subsystem, (Virtual Machine, if you run Vyatta in one) and/or hardware. Regards, Christian -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
