On Wed, May 16, 2012 at 01:41:13PM -0700, Thomas Pedersen wrote:
> ath6kl would issue a wmi disconnect command in response to a remote
> disconnect and return early without notifying cfg80211, only sending a
> cfg80211_disconnected (with reason code always 3) in response to the
> second disconnect firmware event.
>
> Pass the right reason code to cfg80211 on the first disconnect instead.
This fixes at least one bug where a p2p client would stop trying to
connect after receiving a stale RSN deauth which was reported to
cfg80211 as GO leaving BSS.
> Signed-off-by: Thomas Pedersen <c_tpeder@xxxxxxxxxxxxxxxx>
> ---
> drivers/net/wireless/ath/ath6kl/cfg80211.c | 27 ++++++++++++---------------
> 1 files changed, 12 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
> index f3a6cfc..7845d33 100644
> --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
> +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
> @@ -860,20 +860,6 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
> }
> }
>
> - /*
> - * Send a disconnect command to target when a disconnect event is
> - * received with reason code other than 3 (DISCONNECT_CMD - disconnect
> - * request from host) to make the firmware stop trying to connect even
> - * after giving disconnect event. There will be one more disconnect
> - * event for this disconnect command with reason code DISCONNECT_CMD
> - * which will be notified to cfg80211.
> - */
> -
> - if (reason != DISCONNECT_CMD) {
> - ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
> - return;
> - }
> -
> clear_bit(CONNECT_PEND, &vif->flags);
>
> if (vif->sme_state == SME_CONNECTING) {
> @@ -883,11 +869,22 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
> WLAN_STATUS_UNSPECIFIED_FAILURE,
> GFP_KERNEL);
> } else if (vif->sme_state == SME_CONNECTED) {
> - cfg80211_disconnected(vif->ndev, reason,
> + cfg80211_disconnected(vif->ndev, proto_reason,
> NULL, 0, GFP_KERNEL);
> }
>
> vif->sme_state = SME_DISCONNECTED;
> +
> + /*
> + * Send a disconnect command to target when a disconnect event is
> + * received with reason code other than 3 (DISCONNECT_CMD - disconnect
> + * request from host) to make the firmware stop trying to connect even
> + * after giving disconnect event. There will be one more disconnect
> + * event for this disconnect command with reason code DISCONNECT_CMD
> + * which won't be notified to cfg80211.
> + */
> + if (reason != DISCONNECT_CMD)
> + ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
> }
>
> static int ath6kl_set_probed_ssids(struct ath6kl *ar,
> --
> 1.7.4.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
