Instead of cluttering ath9k_init_device() with 'ath_softc' specific initialization code, use ath9k_init_softc() to setup driver-specific work routines, timers etc. Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/init.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index dee9e09..3e22839 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -489,6 +489,7 @@ static void ath9k_init_misc(struct ath_softc *sc) setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc); + sc->last_rssi = ATH_RSSI_DUMMY_MARKER; sc->config.txpowlimit = ATH_TXPOWER_MAX; memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN); sc->beacon.slottime = ATH9K_SLOT_TIME_9; @@ -560,6 +561,12 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet, (unsigned long)sc); + INIT_WORK(&sc->hw_reset_work, ath_reset_work); + INIT_WORK(&sc->hw_check_work, ath_hw_check); + INIT_WORK(&sc->paprd_work, ath_paprd_calibrate); + INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work); + setup_timer(&sc->rx_poll_timer, ath_rx_poll, (unsigned long)sc); + /* * Cache line size is used to size and align various * structures used to communicate with the hardware. @@ -782,11 +789,6 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, ARRAY_SIZE(ath9k_tpt_blink)); #endif - INIT_WORK(&sc->hw_reset_work, ath_reset_work); - INIT_WORK(&sc->hw_check_work, ath_hw_check); - INIT_WORK(&sc->paprd_work, ath_paprd_calibrate); - INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work); - /* Register with mac80211 */ error = ieee80211_register_hw(hw); if (error) @@ -805,9 +807,6 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, goto error_world; } - setup_timer(&sc->rx_poll_timer, ath_rx_poll, (unsigned long)sc); - sc->last_rssi = ATH_RSSI_DUMMY_MARKER; - ath_init_leds(sc); ath_start_rfkill_poll(sc); -- 1.7.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
