From: Johannes Berg <johannes.berg@xxxxxxxxx>
Change cfg80211_can_beacon_sec_chan() to return true
if there is no secondary channel to simplify all the
current users of it. They all check the channel type
before calling the function because it returns false
if there's no secondary channel.
Also actually document the return value.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
include/net/cfg80211.h | 5 ++++-
net/mac80211/ibss.c | 3 +--
net/wireless/chan.c | 22 ++++++----------------
3 files changed, 11 insertions(+), 19 deletions(-)
--- a/include/net/cfg80211.h 2012-05-11 10:22:59.000000000 +0200
+++ b/include/net/cfg80211.h 2012-05-11 10:23:50.000000000 +0200
@@ -3359,11 +3359,14 @@ void cfg80211_report_obss_beacon(struct
const u8 *frame, size_t len,
int freq, int sig_dbm, gfp_t gfp);
-/*
+/**
* cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used
* @wiphy: the wiphy
* @chan: main channel
* @channel_type: HT mode
+ *
+ * This function returns true if there is no secondary channel or the secondary
+ * channel can be used for beaconing (i.e. is not a radar channel etc.)
*/
bool cfg80211_can_beacon_sec_chan(struct wiphy *wiphy,
struct ieee80211_channel *chan,
--- a/net/mac80211/ibss.c 2012-05-10 08:54:21.000000000 +0200
+++ b/net/mac80211/ibss.c 2012-05-11 10:24:13.000000000 +0200
@@ -82,8 +82,7 @@ static void __ieee80211_sta_join_ibss(st
local->oper_channel = chan;
channel_type = ifibss->channel_type;
- if (channel_type > NL80211_CHAN_HT20 &&
- !cfg80211_can_beacon_sec_chan(local->hw.wiphy, chan, channel_type))
+ if (!cfg80211_can_beacon_sec_chan(local->hw.wiphy, chan, channel_type))
channel_type = NL80211_CHAN_HT20;
if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
/* can only fail due to HT40+/- mismatch */
--- a/net/wireless/chan.c 2012-05-11 10:22:59.000000000 +0200
+++ b/net/wireless/chan.c 2012-05-11 10:25:12.000000000 +0200
@@ -60,7 +60,7 @@ bool cfg80211_can_beacon_sec_chan(struct
diff = -20;
break;
default:
- return false;
+ return true;
}
sec_chan = ieee80211_get_channel(wiphy, chan->center_freq + diff);
@@ -107,21 +107,11 @@ int cfg80211_set_freq(struct cfg80211_re
wdev->iftype == NL80211_IFTYPE_AP ||
wdev->iftype == NL80211_IFTYPE_AP_VLAN ||
wdev->iftype == NL80211_IFTYPE_MESH_POINT ||
- wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
- switch (channel_type) {
- case NL80211_CHAN_HT40PLUS:
- case NL80211_CHAN_HT40MINUS:
- if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, chan,
- channel_type)) {
- printk(KERN_DEBUG
- "cfg80211: Secondary channel not "
- "allowed to initiate communication\n");
- return -EINVAL;
- }
- break;
- default:
- break;
- }
+ wdev->iftype == NL80211_IFTYPE_P2P_GO) &&
+ !cfg80211_can_beacon_sec_chan(&rdev->wiphy, chan, channel_type)) {
+ printk(KERN_DEBUG
+ "cfg80211: Secondary channel not allowed to beacon\n");
+ return -EINVAL;
}
result = rdev->ops->set_channel(&rdev->wiphy,
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
