Search Linux Wireless

Re: Rtlwifi with hostapd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'm using 2.6.37 which is in OpenWRT's trunk for kirkwood platform.
I've compiled compat-wireless-2012-04-17 and now RTL8192DE doesn't
hang during hostapd start.
But the AP can't be found during scan performed on PC.

root@CPE:/# dmesg | grep rtl
[   12.203143] rtl8192de: FW Power Save off (module option)
[   12.208714] rtl8192de: Driver for Realtek RTL8192DE WLAN interface
[   12.214945] rtl8192de: Loading firmware file rtlwifi/rtl8192defw.bin
[   12.248888] rtl8192de: FW Power Save off (module option)
[   12.254450] rtl8192de: Driver for Realtek RTL8192DE WLAN interface
[   12.260680] rtl8192de: Loading firmware file rtlwifi/rtl8192defw.bin
[   12.370814] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[   12.371499] rtlwifi: wireless switch is on
[   12.380271] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   12.380947] rtlwifi: wireless switch is on
root@CPE:/# lsmod | grep rtl
rtl8192de              95684  0
rtl8192ce              46108  0
rtl8192c_common        31104  1 rtl8192ce
rtlwifi                49488  2 rtl8192de,rtl8192ce
mac80211              234384  7
ath9k,rtl8192ce,rtl8192c_common,rt2800lib,rtlwifi,rt2x00pci,rt2x00lib
cfg80211              133544  5 ath9k,rtlwifi,ath,rt2x00lib,mac80211
compat                  5872  9
rt2800pci,ath9k,rtl8192de,rtl8192ce,ath9k_common,ath9k_hw,rtlwifi,mac80211,cfg80211
root@CPE:/# dmesg | grep compat-wireless
[   10.704691] Compat-wireless backport release:
compat-wireless-2012-04-17-1-r779

Also I've tried to install RTL8192CE into the same board and it worked
well in AP mode, so I managed to connect to it.

On Thu, Apr 19, 2012 at 8:39 PM, Larry Finger <Larry.Finger@xxxxxxxxxxxx> wrote:
> On 04/19/2012 03:25 AM, Viktar Palstsiuk wrote:
>>
>> Hello
>>
>> I'm trying to run RTL8192DE-based wifi module in AP mode using hostapd.
>> RTL8192DE is connected to Marvell Kirkwood CPU using PCI Express bus.
>> But the kernel hangs right after hostapd was started.
>> In STA mode it is possible to scan for networks in 2.4 GHz band and it
>> discovers ~10 APs.
>> Was rtlwifi driver tested to work with hostapd?
>> I've tried compat-wireless-2011-12-01 and
>> 92ce_se_de_linux_mac80211_0005.1230.2011.tar.gz from Realtek site.
>
>
> without knowing any details of the kernel hangs, it is impossible to know
> what might be wrong. If you switch to the logging console immediately upon
> starting hostapd, is anything reported on the screen?
>
> I have not used the RTL8192DE as an AP, but the SE variety does work. There
> are some important fixes for AP mode that are not in compat-wireless as old
> as the one you are using. Please try a version from this week. Those fixes
> are also not included in the driver on the Realtek site.
>
> What kernel version are you using? Is there a possibility to switch to the
> kernel from the wireless-testing git tree?
>
> Larry
>



-- 
Best regards,
Viktar Palstsiuk

--
Software engineer
Promwad Innovation Company
22, Olshevskogo St.,
220073, Minsk, BELARUS
Phone/Fax: +375 (17) 312-12-46
E-mail: viktar.palstsiuk@xxxxxxxxxxx
Skype: vipals
Web: www.promwad.com
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux