Currently a WIP.
Signed-off-by: Joshua Roys <Joshua.Roys@xxxxxxxxxxxxxxx>
---
drivers/net/wireless/rtlwifi/Kconfig | 15 +-
drivers/net/wireless/rtlwifi/Makefile | 1 +
drivers/net/wireless/rtlwifi/rtl8192su/Makefile | 14 +
drivers/net/wireless/rtlwifi/rtl8192su/def.h | 30 +
drivers/net/wireless/rtlwifi/rtl8192su/dm.c | 737 +++++++
drivers/net/wireless/rtlwifi/rtl8192su/dm.h | 119 ++
drivers/net/wireless/rtlwifi/rtl8192su/fw.c | 800 +++++++
drivers/net/wireless/rtlwifi/rtl8192su/fw.h | 456 ++++
drivers/net/wireless/rtlwifi/rtl8192su/hw.c | 2573 +++++++++++++++++++++++
drivers/net/wireless/rtlwifi/rtl8192su/hw.h | 79 +
drivers/net/wireless/rtlwifi/rtl8192su/led.c | 154 ++
drivers/net/wireless/rtlwifi/rtl8192su/led.h | 38 +
drivers/net/wireless/rtlwifi/rtl8192su/phy.c | 1751 +++++++++++++++
drivers/net/wireless/rtlwifi/rtl8192su/phy.h | 100 +
drivers/net/wireless/rtlwifi/rtl8192su/reg.h | 1232 +++++++++++
drivers/net/wireless/rtlwifi/rtl8192su/rf.c | 542 +++++
drivers/net/wireless/rtlwifi/rtl8192su/rf.h | 42 +
drivers/net/wireless/rtlwifi/rtl8192su/sw.c | 546 +++++
drivers/net/wireless/rtlwifi/rtl8192su/sw.h | 36 +
drivers/net/wireless/rtlwifi/rtl8192su/table.c | 633 ++++++
drivers/net/wireless/rtlwifi/rtl8192su/table.h | 48 +
drivers/net/wireless/rtlwifi/rtl8192su/trx.c | 1089 ++++++++++
drivers/net/wireless/rtlwifi/rtl8192su/trx.h | 59 +
23 files changed, 11092 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/Makefile
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/def.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/dm.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/dm.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/fw.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/fw.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/hw.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/hw.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/led.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/led.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/phy.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/phy.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/reg.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/rf.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/rf.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/sw.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/sw.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/table.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/table.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/trx.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192su/trx.h
diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index cefac6a..b528f41 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -44,14 +44,25 @@ config RTL8192CU
If you choose to build it as a module, it will be called rtl8192cu
+config RTL8192SU
+ tristate "Realtek RTL8192SU/RTL8191SU/RTL8188SU USB Wireless Network Adapter"
+ depends on MAC80211 && USB && EXPERIMENTAL
+ select FW_LOADER
+ select RTLWIFI
+ ---help---
+ This is the driver for Realtek RTL8192SU/RTL8191SU/RTL8188SU 802.11 USB
+ wireless network adapters.
+
+ If you choose to build it as a module, it will be called rtl8192su
+
config RTLWIFI
tristate
- depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE
+ depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192SU || RTL8192DE
default m
config RTLWIFI_DEBUG
bool "Additional debugging output"
- depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE
+ depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192SU || RTL8192DE
default y
config RTL8192C_COMMON
diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile
index 97935c5..b54f45e 100644
--- a/drivers/net/wireless/rtlwifi/Makefile
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_RTL8192C_COMMON) += rtl8192c/
obj-$(CONFIG_RTL8192CE) += rtl8192ce/
obj-$(CONFIG_RTL8192CU) += rtl8192cu/
obj-$(CONFIG_RTL8192SE) += rtl8192se/
+obj-$(CONFIG_RTL8192SU) += rtl8192su/
obj-$(CONFIG_RTL8192DE) += rtl8192de/
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/Makefile b/drivers/net/wireless/rtlwifi/rtl8192su/Makefile
new file mode 100644
index 0000000..ebd7080
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/Makefile
@@ -0,0 +1,14 @@
+rtl8192su-objs := \
+ dm.o \
+ fw.o \
+ hw.o \
+ led.o \
+ phy.o \
+ rf.o \
+ sw.o \
+ table.o \
+ trx.o
+
+obj-$(CONFIG_RTL8192SU) += rtl8192su.o
+
+ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/def.h b/drivers/net/wireless/rtlwifi/rtl8192su/def.h
new file mode 100644
index 0000000..f2ce4bf
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/def.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../rtl8192se/def.h"
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/dm.c b/drivers/net/wireless/rtlwifi/rtl8192su/dm.c
new file mode 100644
index 0000000..27df33d
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/dm.c
@@ -0,0 +1,737 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+
+static const u32 edca_setting_dl[PEER_MAX] = {
+ 0xa44f, /* 0 UNKNOWN */
+ 0x5ea44f, /* 1 REALTEK_90 */
+ 0x5ea44f, /* 2 REALTEK_92SE */
+ 0xa630, /* 3 BROAD */
+ 0xa44f, /* 4 RAL */
+ 0xa630, /* 5 ATH */
+ 0xa630, /* 6 CISCO */
+ 0xa42b, /* 7 MARV */
+};
+
+static const u32 edca_setting_dl_gmode[PEER_MAX] = {
+ 0x4322, /* 0 UNKNOWN */
+ 0xa44f, /* 1 REALTEK_90 */
+ 0x5ea44f, /* 2 REALTEK_92SE */
+ 0xa42b, /* 3 BROAD */
+ 0x5e4322, /* 4 RAL */
+ 0x4322, /* 5 ATH */
+ 0xa430, /* 6 CISCO */
+ 0x5ea44f, /* 7 MARV */
+};
+
+static const u32 edca_setting_ul[PEER_MAX] = {
+ 0x5e4322, /* 0 UNKNOWN */
+ 0xa44f, /* 1 REALTEK_90 */
+ 0x5ea44f, /* 2 REALTEK_92SE */
+ 0x5ea322, /* 3 BROAD */
+ 0x5ea422, /* 4 RAL */
+ 0x5ea322, /* 5 ATH */
+ 0x3ea44f, /* 6 CISCO */
+ 0x5ea44f, /* 7 MARV */
+};
+
+#if 0
+static void _rtl92s_dm_check_edca_turbo(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+ static u64 last_txok_cnt;
+ static u64 last_rxok_cnt;
+ u64 cur_txok_cnt = 0;
+ u64 cur_rxok_cnt = 0;
+
+ u32 edca_be_ul = edca_setting_ul[mac->vendor];
+ u32 edca_be_dl = edca_setting_dl[mac->vendor];
+ u32 edca_gmode = edca_setting_dl_gmode[mac->vendor];
+
+ if (mac->link_state != MAC80211_LINKED) {
+ rtlpriv->dm.current_turbo_edca = false;
+ goto dm_checkedcaturbo_exit;
+ }
+
+ if ((!rtlpriv->dm.is_any_nonbepkts) &&
+ (!rtlpriv->dm.disable_framebursting)) {
+ cur_txok_cnt = rtlpriv->stats.txbytesunicast - last_txok_cnt;
+ cur_rxok_cnt = rtlpriv->stats.rxbytesunicast - last_rxok_cnt;
+
+ if (rtlpriv->phy.rf_type == RF_1T2R) {
+ if (cur_txok_cnt > 4 * cur_rxok_cnt) {
+ /* Uplink TP is present. */
+ if (rtlpriv->dm.is_cur_rdlstate ||
+ !rtlpriv->dm.current_turbo_edca) {
+ rtl_write_dword(rtlpriv, EDCAPARA_BE,
+ edca_be_ul);
+ rtlpriv->dm.is_cur_rdlstate = false;
+ }
+ } else {/* Balance TP is present. */
+ if (!rtlpriv->dm.is_cur_rdlstate ||
+ !rtlpriv->dm.current_turbo_edca) {
+ if (mac->mode == WIRELESS_MODE_G ||
+ mac->mode == WIRELESS_MODE_B)
+ rtl_write_dword(rtlpriv,
+ EDCAPARA_BE,
+ edca_gmode);
+ else
+ rtl_write_dword(rtlpriv,
+ EDCAPARA_BE,
+ edca_be_dl);
+ rtlpriv->dm.is_cur_rdlstate = true;
+ }
+ }
+ rtlpriv->dm.current_turbo_edca = true;
+ } else {
+ if (cur_rxok_cnt > 4 * cur_txok_cnt) {
+ if (!rtlpriv->dm.is_cur_rdlstate ||
+ !rtlpriv->dm.current_turbo_edca) {
+ if (mac->mode == WIRELESS_MODE_G ||
+ mac->mode == WIRELESS_MODE_B)
+ rtl_write_dword(rtlpriv,
+ EDCAPARA_BE,
+ edca_gmode);
+ else
+ rtl_write_dword(rtlpriv,
+ EDCAPARA_BE,
+ edca_be_dl);
+ rtlpriv->dm.is_cur_rdlstate = true;
+ }
+ } else {
+ if (rtlpriv->dm.is_cur_rdlstate ||
+ !rtlpriv->dm.current_turbo_edca) {
+ rtl_write_dword(rtlpriv, EDCAPARA_BE,
+ edca_be_ul);
+ rtlpriv->dm.is_cur_rdlstate = false;
+ }
+ }
+ rtlpriv->dm.current_turbo_edca = true;
+ }
+ } else {
+ if (rtlpriv->dm.current_turbo_edca) {
+ u8 tmp = AC0_BE;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
+ (u8 *)(&tmp));
+ rtlpriv->dm.current_turbo_edca = false;
+ }
+ }
+
+dm_checkedcaturbo_exit:
+ rtlpriv->dm.is_any_nonbepkts = false;
+ last_txok_cnt = rtlpriv->stats.txbytesunicast;
+ last_rxok_cnt = rtlpriv->stats.rxbytesunicast;
+}
+
+static void _rtl92s_dm_txpowertracking_callback_thermalmeter(
+ struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 thermalvalue = 0;
+
+ rtlpriv->dm.txpower_trackinginit = true;
+
+ thermalvalue = (u8)rtl_get_rfreg(hw, RF90_PATH_A, RF_T_METER, 0x1f);
+
+ RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+ "Readback Thermal Meter = 0x%x pre thermal meter 0x%x eeprom_thermal meter 0x%x\n",
+ thermalvalue,
+ rtlpriv->dm.thermalvalue, rtlefuse->eeprom_thermalmeter);
+
+ if (thermalvalue) {
+ rtlpriv->dm.thermalvalue = thermalvalue;
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_TXPWR_TRACK_THERMAL);
+ }
+
+ rtlpriv->dm.txpowercount = 0;
+}
+
+static void _rtl92s_dm_check_txpowertracking_thermalmeter(
+ struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ static u8 tm_trigger;
+ u8 tx_power_checkcnt = 5;
+
+ /* 2T2R TP issue */
+ if (rtlphy->rf_type == RF_2T2R)
+ return;
+
+ if (!rtlpriv->dm.txpower_tracking)
+ return;
+
+ if (rtlpriv->dm.txpowercount <= tx_power_checkcnt) {
+ rtlpriv->dm.txpowercount++;
+ return;
+ }
+
+ if (!tm_trigger) {
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_T_METER,
+ RFREG_OFFSET_MASK, 0x60);
+ tm_trigger = 1;
+ } else {
+ _rtl92s_dm_txpowertracking_callback_thermalmeter(hw);
+ tm_trigger = 0;
+ }
+}
+
+static void _rtl92s_dm_refresh_rateadaptive_mask(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rate_adaptive *ra = &(rtlpriv->ra);
+
+ u32 low_rssi_thresh = 0;
+ u32 middle_rssi_thresh = 0;
+ u32 high_rssi_thresh = 0;
+ struct ieee80211_sta *sta = NULL;
+
+ if (is_hal_stop(rtlhal))
+ return;
+
+ if (!rtlpriv->dm.useramask)
+ return;
+
+ if (!rtlpriv->dm.inform_fw_driverctrldm) {
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_CTRL_DM_BY_DRIVER);
+ rtlpriv->dm.inform_fw_driverctrldm = true;
+ }
+
+ rcu_read_lock();
+ if (mac->opmode == NL80211_IFTYPE_STATION)
+ sta = get_sta(hw, mac->vif, mac->bssid);
+ if ((mac->link_state == MAC80211_LINKED) &&
+ (mac->opmode == NL80211_IFTYPE_STATION)) {
+ switch (ra->pre_ratr_state) {
+ case DM_RATR_STA_HIGH:
+ high_rssi_thresh = 40;
+ middle_rssi_thresh = 30;
+ low_rssi_thresh = 20;
+ break;
+ case DM_RATR_STA_MIDDLE:
+ high_rssi_thresh = 44;
+ middle_rssi_thresh = 30;
+ low_rssi_thresh = 20;
+ break;
+ case DM_RATR_STA_LOW:
+ high_rssi_thresh = 44;
+ middle_rssi_thresh = 34;
+ low_rssi_thresh = 20;
+ break;
+ case DM_RATR_STA_ULTRALOW:
+ high_rssi_thresh = 44;
+ middle_rssi_thresh = 34;
+ low_rssi_thresh = 24;
+ break;
+ default:
+ high_rssi_thresh = 44;
+ middle_rssi_thresh = 34;
+ low_rssi_thresh = 24;
+ break;
+ }
+
+ if (rtlpriv->dm.undecorated_smoothed_pwdb >
+ (long)high_rssi_thresh) {
+ ra->ratr_state = DM_RATR_STA_HIGH;
+ } else if (rtlpriv->dm.undecorated_smoothed_pwdb >
+ (long)middle_rssi_thresh) {
+ ra->ratr_state = DM_RATR_STA_LOW;
+ } else if (rtlpriv->dm.undecorated_smoothed_pwdb >
+ (long)low_rssi_thresh) {
+ ra->ratr_state = DM_RATR_STA_LOW;
+ } else {
+ ra->ratr_state = DM_RATR_STA_ULTRALOW;
+ }
+
+ if (ra->pre_ratr_state != ra->ratr_state) {
+ RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+ "RSSI = %ld RSSI_LEVEL = %d PreState = %d, CurState = %d\n",
+ rtlpriv->dm.undecorated_smoothed_pwdb,
+ ra->ratr_state,
+ ra->pre_ratr_state, ra->ratr_state);
+
+ rtlpriv->cfg->ops->update_rate_tbl(hw, sta,
+ ra->ratr_state);
+ ra->pre_ratr_state = ra->ratr_state;
+ }
+ }
+ rcu_read_unlock();
+}
+
+static void _rtl92s_dm_switch_baseband_mrc(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ bool current_mrc;
+ bool enable_mrc = true;
+ long tmpentry_maxpwdb = 0;
+ u8 rssi_a = 0;
+ u8 rssi_b = 0;
+
+ if (is_hal_stop(rtlhal))
+ return;
+
+ if ((rtlphy->rf_type == RF_1T1R) || (rtlphy->rf_type == RF_2T2R))
+ return;
+
+ rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_MRC, (u8 *)(¤t_mrc));
+
+ if (mac->link_state >= MAC80211_LINKED) {
+ if (rtlpriv->dm.undecorated_smoothed_pwdb > tmpentry_maxpwdb) {
+ rssi_a = rtlpriv->stats.rx_rssi_percentage[RF90_PATH_A];
+ rssi_b = rtlpriv->stats.rx_rssi_percentage[RF90_PATH_B];
+ }
+ }
+
+ /* MRC settings would NOT affect TP on Wireless B mode. */
+ if (mac->mode != WIRELESS_MODE_B) {
+ if ((rssi_a == 0) && (rssi_b == 0)) {
+ enable_mrc = true;
+ } else if (rssi_b > 30) {
+ /* Turn on B-Path */
+ enable_mrc = true;
+ } else if (rssi_b < 5) {
+ /* Turn off B-path */
+ enable_mrc = false;
+ /* Take care of RSSI differentiation. */
+ } else if (rssi_a > 15 && (rssi_a >= rssi_b)) {
+ if ((rssi_a - rssi_b) > 15)
+ /* Turn off B-path */
+ enable_mrc = false;
+ else if ((rssi_a - rssi_b) < 10)
+ /* Turn on B-Path */
+ enable_mrc = true;
+ else
+ enable_mrc = current_mrc;
+ } else {
+ /* Turn on B-Path */
+ enable_mrc = true;
+ }
+ }
+
+ /* Update MRC settings if needed. */
+ if (enable_mrc != current_mrc)
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC,
+ (u8 *)&enable_mrc);
+
+}
+#endif
+
+void rtl92s_dm_init_edca_turbo(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->dm.current_turbo_edca = false;
+ rtlpriv->dm.is_any_nonbepkts = false;
+ rtlpriv->dm.is_cur_rdlstate = false;
+}
+
+static void _rtl92s_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rate_adaptive *ra = &(rtlpriv->ra);
+
+ ra->ratr_state = DM_RATR_STA_MAX;
+ ra->pre_ratr_state = DM_RATR_STA_MAX;
+
+ if (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER)
+ rtlpriv->dm.useramask = true;
+ else
+ rtlpriv->dm.useramask = false;
+
+ rtlpriv->dm.useramask = false;
+ rtlpriv->dm.inform_fw_driverctrldm = false;
+}
+
+static void _rtl92s_dm_init_txpowertracking_thermalmeter(
+ struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->dm.txpower_tracking = true;
+ rtlpriv->dm.txpowercount = 0;
+ rtlpriv->dm.txpower_trackinginit = false;
+}
+
+#if 0
+static void _rtl92s_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+ u32 ret_value;
+
+ ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER1, MASKDWORD);
+ falsealm_cnt->cnt_parity_fail = ((ret_value & 0xffff0000) >> 16);
+
+ ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER2, MASKDWORD);
+ falsealm_cnt->cnt_rate_illegal = (ret_value & 0xffff);
+ falsealm_cnt->cnt_crc8_fail = ((ret_value & 0xffff0000) >> 16);
+ ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER3, MASKDWORD);
+ falsealm_cnt->cnt_mcs_fail = (ret_value & 0xffff);
+
+ falsealm_cnt->cnt_ofdm_fail = falsealm_cnt->cnt_parity_fail +
+ falsealm_cnt->cnt_rate_illegal + falsealm_cnt->cnt_crc8_fail +
+ falsealm_cnt->cnt_mcs_fail;
+
+ /* read CCK false alarm */
+ ret_value = rtl_get_bbreg(hw, 0xc64, MASKDWORD);
+ falsealm_cnt->cnt_cck_fail = (ret_value & 0xffff);
+ falsealm_cnt->cnt_all = falsealm_cnt->cnt_ofdm_fail +
+ falsealm_cnt->cnt_cck_fail;
+}
+
+static void rtl92s_backoff_enable_flag(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct dig_t *digtable = &rtlpriv->dm_digtable;
+ struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+
+ if (falsealm_cnt->cnt_all > digtable->fa_highthresh) {
+ if ((digtable->backoff_val - 6) <
+ digtable->backoffval_range_min)
+ digtable->backoff_val = digtable->backoffval_range_min;
+ else
+ digtable->backoff_val -= 6;
+ } else if (falsealm_cnt->cnt_all < digtable->fa_lowthresh) {
+ if ((digtable->backoff_val + 6) >
+ digtable->backoffval_range_max)
+ digtable->backoff_val =
+ digtable->backoffval_range_max;
+ else
+ digtable->backoff_val += 6;
+ }
+}
+
+static void _rtl92s_dm_initial_gain_sta_beforeconnect(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct dig_t *digtable = &rtlpriv->dm_digtable;
+ struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+ static u8 initialized, force_write;
+ u8 initial_gain = 0;
+
+ if ((digtable->pre_sta_connectstate == digtable->cur_sta_connectstate) ||
+ (digtable->cur_sta_connectstate == DIG_STA_BEFORE_CONNECT)) {
+ if (digtable->cur_sta_connectstate == DIG_STA_BEFORE_CONNECT) {
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
+
+ if (digtable->backoff_enable_flag)
+ rtl92s_backoff_enable_flag(hw);
+ else
+ digtable->backoff_val = DM_DIG_BACKOFF;
+
+ if ((digtable->rssi_val + 10 - digtable->backoff_val) >
+ digtable->rx_gain_range_max)
+ digtable->cur_igvalue =
+ digtable->rx_gain_range_max;
+ else if ((digtable->rssi_val + 10 - digtable->backoff_val)
+ < digtable->rx_gain_range_min)
+ digtable->cur_igvalue =
+ digtable->rx_gain_range_min;
+ else
+ digtable->cur_igvalue = digtable->rssi_val + 10 -
+ digtable->backoff_val;
+
+ if (falsealm_cnt->cnt_all > 10000)
+ digtable->cur_igvalue =
+ (digtable->cur_igvalue > 0x33) ?
+ digtable->cur_igvalue : 0x33;
+
+ if (falsealm_cnt->cnt_all > 16000)
+ digtable->cur_igvalue =
+ digtable->rx_gain_range_max;
+ /* connected -> connected or disconnected -> disconnected */
+ } else {
+ /* Firmware control DIG, do nothing in driver dm */
+ return;
+ }
+ /* disconnected -> connected or connected ->
+ * disconnected or beforeconnect->(dis)connected */
+ } else {
+ /* Enable FW DIG */
+ digtable->dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_ENABLE);
+
+ digtable->backoff_val = DM_DIG_BACKOFF;
+ digtable->cur_igvalue = rtlpriv->phy.default_initialgain[0];
+ digtable->pre_igvalue = 0;
+ return;
+ }
+
+ /* Forced writing to prevent from fw-dig overwriting. */
+ if (digtable->pre_igvalue != rtl_get_bbreg(hw, ROFDM0_XAAGCCORE1,
+ MASKBYTE0))
+ force_write = 1;
+
+ if ((digtable->pre_igvalue != digtable->cur_igvalue) ||
+ !initialized || force_write) {
+ /* Disable FW DIG */
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_DISABLE);
+
+ initial_gain = (u8)digtable->cur_igvalue;
+
+ /* Set initial gain. */
+ rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, initial_gain);
+ rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, initial_gain);
+ digtable->pre_igvalue = digtable->cur_igvalue;
+ initialized = 1;
+ force_write = 0;
+ }
+}
+
+static void _rtl92s_dm_ctrl_initgain_bytwoport(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct dig_t *digtable = &rtlpriv->dm_digtable;
+
+ if (rtlpriv->mac80211.act_scanning)
+ return;
+
+ /* Decide the current status and if modify initial gain or not */
+ if (rtlpriv->mac80211.link_state >= MAC80211_LINKED ||
+ rtlpriv->mac80211.opmode == NL80211_IFTYPE_ADHOC)
+ digtable->cur_sta_connectstate = DIG_STA_CONNECT;
+ else
+ digtable->cur_sta_connectstate = DIG_STA_DISCONNECT;
+
+ digtable->rssi_val = rtlpriv->dm.undecorated_smoothed_pwdb;
+
+ /* Change dig mode to rssi */
+ if (digtable->cur_sta_connectstate != DIG_STA_DISCONNECT) {
+ if (digtable->dig_twoport_algorithm ==
+ DIG_TWO_PORT_ALGO_FALSE_ALARM) {
+ digtable->dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI;
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_MODE_SS);
+ }
+ }
+
+ _rtl92s_dm_false_alarm_counter_statistics(hw);
+ _rtl92s_dm_initial_gain_sta_beforeconnect(hw);
+
+ digtable->pre_sta_connectstate = digtable->cur_sta_connectstate;
+}
+
+static void _rtl92s_dm_ctrl_initgain_byrssi(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct dig_t *digtable = &rtlpriv->dm_digtable;
+
+ /* 2T2R TP issue */
+ if (rtlphy->rf_type == RF_2T2R)
+ return;
+
+ if (!rtlpriv->dm.dm_initialgain_enable)
+ return;
+
+ if (digtable->dig_enable_flag == false)
+ return;
+
+ _rtl92s_dm_ctrl_initgain_bytwoport(hw);
+}
+
+static void _rtl92s_dm_dynamic_txpower(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ long undecorated_smoothed_pwdb;
+ long txpwr_threshold_lv1, txpwr_threshold_lv2;
+
+ /* 2T2R TP issue */
+ if (rtlphy->rf_type == RF_2T2R)
+ return;
+
+ if (!rtlpriv->dm.dynamic_txpower_enable ||
+ rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) {
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+ return;
+ }
+
+ if ((mac->link_state < MAC80211_LINKED) &&
+ (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb == 0)) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+ "Not connected to any\n");
+
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+
+ rtlpriv->dm.last_dtp_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+ return;
+ }
+
+ if (mac->link_state >= MAC80211_LINKED) {
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "AP Client PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb);
+ } else {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.undecorated_smoothed_pwdb;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "STA Default Port PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb);
+ }
+ } else {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "AP Ext Port PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb);
+ }
+
+ txpwr_threshold_lv2 = TX_POWER_NEAR_FIELD_THRESH_LVL2;
+ txpwr_threshold_lv1 = TX_POWER_NEAR_FIELD_THRESH_LVL1;
+
+ if (rtl_get_bbreg(hw, 0xc90, MASKBYTE0) == 1)
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+ else if (undecorated_smoothed_pwdb >= txpwr_threshold_lv2)
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL2;
+ else if ((undecorated_smoothed_pwdb < (txpwr_threshold_lv2 - 3)) &&
+ (undecorated_smoothed_pwdb >= txpwr_threshold_lv1))
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL1;
+ else if (undecorated_smoothed_pwdb < (txpwr_threshold_lv1 - 3))
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+
+ if ((rtlpriv->dm.dynamic_txhighpower_lvl != rtlpriv->dm.last_dtp_lvl))
+ rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+
+ rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl;
+}
+#endif
+
+static void _rtl92s_dm_init_dig(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct dig_t *digtable = &rtlpriv->dm_digtable;
+
+ /* Disable DIG scheme now.*/
+ digtable->dig_enable_flag = true;
+ digtable->backoff_enable_flag = true;
+
+ if ((rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER) &&
+ (hal_get_firmwareversion(rtlpriv) >= 0x3c))
+ digtable->dig_algorithm = DIG_ALGO_BY_TOW_PORT;
+ else
+ digtable->dig_algorithm =
+ DIG_ALGO_BEFORE_CONNECT_BY_RSSI_AND_ALARM;
+
+ digtable->dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI;
+ digtable->dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
+ /* off=by real rssi value, on=by digtable->rssi_val for new dig */
+ digtable->dig_dbgmode = DM_DBG_OFF;
+ digtable->dig_slgorithm_switch = 0;
+
+ /* 2007/10/04 MH Define init gain threshol. */
+ digtable->dig_state = DM_STA_DIG_MAX;
+ digtable->dig_highpwrstate = DM_STA_DIG_MAX;
+
+ digtable->cur_sta_connectstate = DIG_STA_DISCONNECT;
+ digtable->pre_sta_connectstate = DIG_STA_DISCONNECT;
+ digtable->cur_ap_connectstate = DIG_AP_DISCONNECT;
+ digtable->pre_ap_connectstate = DIG_AP_DISCONNECT;
+
+ digtable->rssi_lowthresh = DM_DIG_THRESH_LOW;
+ digtable->rssi_highthresh = DM_DIG_THRESH_HIGH;
+
+ digtable->fa_lowthresh = DM_FALSEALARM_THRESH_LOW;
+ digtable->fa_highthresh = DM_FALSEALARM_THRESH_HIGH;
+
+ digtable->rssi_highpower_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW;
+ digtable->rssi_highpower_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH;
+
+ /* for dig debug rssi value */
+ digtable->rssi_val = 50;
+ digtable->backoff_val = DM_DIG_BACKOFF;
+ digtable->rx_gain_range_max = DM_DIG_MAX;
+
+ digtable->rx_gain_range_min = DM_DIG_MIN;
+
+ digtable->backoffval_range_max = DM_DIG_BACKOFF_MAX;
+ digtable->backoffval_range_min = DM_DIG_BACKOFF_MIN;
+}
+
+static void _rtl92s_dm_init_dynamic_txpower(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if ((hal_get_firmwareversion(rtlpriv) >= 60) &&
+ (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER))
+ rtlpriv->dm.dynamic_txpower_enable = true;
+ else
+ rtlpriv->dm.dynamic_txpower_enable = false;
+
+ rtlpriv->dm.last_dtp_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+}
+
+void rtl92s_dm_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->dm.dm_type = DM_TYPE_BYDRIVER;
+ rtlpriv->dm.undecorated_smoothed_pwdb = -1;
+
+ _rtl92s_dm_init_dynamic_txpower(hw);
+ rtl92s_dm_init_edca_turbo(hw);
+ _rtl92s_dm_init_rate_adaptive_mask(hw);
+ _rtl92s_dm_init_txpowertracking_thermalmeter(hw);
+ _rtl92s_dm_init_dig(hw);
+
+ //rtl_write_dword(rtlpriv, WFM5, FW_CCA_CHK_ENABLE);
+}
+
+void rtl92s_dm_watchdog(struct ieee80211_hw *hw)
+{
+/*
+ _rtl92s_dm_check_edca_turbo(hw);
+ _rtl92s_dm_check_txpowertracking_thermalmeter(hw);
+ _rtl92s_dm_ctrl_initgain_byrssi(hw);
+ _rtl92s_dm_dynamic_txpower(hw);
+ _rtl92s_dm_refresh_rateadaptive_mask(hw);
+ _rtl92s_dm_switch_baseband_mrc(hw);
+*/
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/dm.h b/drivers/net/wireless/rtlwifi/rtl8192su/dm.h
new file mode 100644
index 0000000..6bf5c70
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/dm.h
@@ -0,0 +1,119 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+#ifndef __RTL_92S_DM_H__
+#define __RTL_92S_DM_H__
+
+enum dm_dig_alg {
+ DIG_ALGO_BY_FALSE_ALARM = 0,
+ DIG_ALGO_BY_RSSI = 1,
+ DIG_ALGO_BEFORE_CONNECT_BY_RSSI_AND_ALARM = 2,
+ DIG_ALGO_BY_TOW_PORT = 3,
+ DIG_ALGO_MAX
+};
+
+enum dm_dig_two_port_alg {
+ DIG_TWO_PORT_ALGO_RSSI = 0,
+ DIG_TWO_PORT_ALGO_FALSE_ALARM = 1,
+};
+
+enum dm_dig_dbg {
+ DM_DBG_OFF = 0,
+ DM_DBG_ON = 1,
+ DM_DBG_MAX
+};
+
+enum dm_dig_sta {
+ DM_STA_DIG_OFF = 0,
+ DM_STA_DIG_ON,
+ DM_STA_DIG_MAX
+};
+
+enum dm_dig_connect {
+ DIG_STA_DISCONNECT = 0,
+ DIG_STA_CONNECT = 1,
+ DIG_STA_BEFORE_CONNECT = 2,
+ DIG_AP_DISCONNECT = 3,
+ DIG_AP_CONNECT = 4,
+ DIG_AP_ADD_STATION = 5,
+ DIG_CONNECT_MAX
+};
+
+enum dm_dig_ext_port_alg {
+ DIG_EXT_PORT_STAGE_0 = 0,
+ DIG_EXT_PORT_STAGE_1 = 1,
+ DIG_EXT_PORT_STAGE_2 = 2,
+ DIG_EXT_PORT_STAGE_3 = 3,
+ DIG_EXT_PORT_STAGE_MAX = 4,
+};
+
+enum dm_ratr_sta {
+ DM_RATR_STA_HIGH = 0,
+ DM_RATR_STA_MIDDLEHIGH = 1,
+ DM_RATR_STA_MIDDLE = 2,
+ DM_RATR_STA_MIDDLELOW = 3,
+ DM_RATR_STA_LOW = 4,
+ DM_RATR_STA_ULTRALOW = 5,
+ DM_RATR_STA_MAX
+};
+
+#define DM_TYPE_BYFW 0
+#define DM_TYPE_BYDRIVER 1
+
+#define TX_HIGH_PWR_LEVEL_NORMAL 0
+#define TX_HIGH_PWR_LEVEL_LEVEL1 1
+#define TX_HIGH_PWR_LEVEL_LEVEL2 2
+
+#define HAL_DM_DIG_DISABLE BIT(0) /* Disable Dig */
+#define HAL_DM_HIPWR_DISABLE BIT(1) /* Disable High Power */
+
+#define TX_HIGHPWR_LEVEL_NORMAL 0
+#define TX_HIGHPWR_LEVEL_NORMAL1 1
+#define TX_HIGHPWR_LEVEL_NORMAL2 2
+
+#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74
+#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67
+
+#define DM_DIG_THRESH_HIGH 40
+#define DM_DIG_THRESH_LOW 35
+#define DM_FALSEALARM_THRESH_LOW 40
+#define DM_FALSEALARM_THRESH_HIGH 1000
+#define DM_DIG_HIGH_PWR_THRESH_HIGH 75
+#define DM_DIG_HIGH_PWR_THRESH_LOW 70
+#define DM_DIG_BACKOFF 12
+#define DM_DIG_MAX 0x3e
+#define DM_DIG_MIN 0x1c
+#define DM_DIG_MIN_Netcore 0x12
+#define DM_DIG_BACKOFF_MAX 12
+#define DM_DIG_BACKOFF_MIN -4
+
+void rtl92s_dm_watchdog(struct ieee80211_hw *hw);
+void rtl92s_dm_init(struct ieee80211_hw *hw);
+void rtl92s_dm_init_edca_turbo(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/fw.c b/drivers/net/wireless/rtlwifi/rtl8192su/fw.c
new file mode 100644
index 0000000..1f2a019
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/fw.c
@@ -0,0 +1,800 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../usb.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "fw.h"
+
+/*
+static void _rtl92s_fw_set_rqpn(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtl_write_dword(rtlpriv, RQPN, 0xffffffff);
+ rtl_write_dword(rtlpriv, RQPN + 4, 0xffffffff);
+ rtl_write_byte(rtlpriv, RQPN + 8, 0xff);
+ rtl_write_byte(rtlpriv, RQPN + 0xB, 0x80);
+}
+*/
+
+static bool _rtl92s_firmware_enable_cpu(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 ichecktime = 200;
+ u16 tmpu2b;
+ u8 tmpu1b, cpustatus = 0;
+
+ //_rtl92s_fw_set_rqpn(hw);
+
+ /* Enable CPU. */
+ tmpu1b = rtl_read_byte(rtlpriv, SYS_CLKR);
+ /* AFE source */
+ rtl_write_byte(rtlpriv, SYS_CLKR, (tmpu1b | SYS_CPU_CLKSEL));
+
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | FEN_CPUEN));
+
+ /* Polling IMEM Ready after CPU has refilled. */
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & IMEM_RDY) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "IMEM Ready after CPU has refilled\n");
+ break;
+ }
+
+ udelay(100);
+ } while (ichecktime--);
+
+ if (!(cpustatus & IMEM_RDY))
+ return false;
+
+ return true;
+}
+
+static enum fw_status _rtl92s_firmware_get_nextstatus(
+ enum fw_status fw_currentstatus)
+{
+ enum fw_status next_fwstatus = 0;
+
+ switch (fw_currentstatus) {
+ case FW_STATUS_INIT:
+ next_fwstatus = FW_STATUS_LOAD_IMEM;
+ break;
+ case FW_STATUS_LOAD_IMEM:
+ next_fwstatus = FW_STATUS_LOAD_EMEM;
+ break;
+ case FW_STATUS_LOAD_EMEM:
+ next_fwstatus = FW_STATUS_LOAD_DMEM;
+ break;
+ case FW_STATUS_LOAD_DMEM:
+ next_fwstatus = FW_STATUS_READY;
+ break;
+ default:
+ break;
+ }
+
+ return next_fwstatus;
+}
+
+static u8 _rtl92s_firmware_header_map_rftype(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ switch (rtlphy->rf_type) {
+ case RF_1T1R:
+ return 0x11;
+ case RF_1T2R:
+ return 0x12;
+ case RF_2T2R:
+ return 0x22;
+ default:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown RF type(%x)\n",
+ rtlphy->rf_type);
+ break;
+ }
+ return 0x22;
+}
+
+static void _rtl92s_firmwareheader_priveupdate(struct ieee80211_hw *hw,
+ struct fw_priv *pfw_priv)
+{
+ /* Update RF types for RATR settings. */
+ pfw_priv->rf_config = _rtl92s_firmware_header_map_rftype(hw);
+}
+
+
+static void _rtl92s_cmd_complete(struct urb *urb)
+{
+}
+
+static bool _rtl92s_cmd_send_packet(struct ieee80211_hw *hw,
+ struct sk_buff *skb, u8 last)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+ struct rtl_tcb_desc *tcb_desc;
+ struct urb *urb;
+ u8 *pdesc;
+ u32 ep_num;
+
+ pdesc = (u8 *)skb_push(skb, RTL_TX_HEADER_SIZE);
+ rtlpriv->cfg->ops->fill_tx_cmddesc(hw, pdesc, 1, 1, skb);
+
+ tcb_desc = (struct rtl_tcb_desc *)(skb->cb);
+ /* _rtl_usb_transmit */
+ ep_num = rtlusb->ep_map.ep_mapping[tcb_desc->queue_index];
+ /* _rtl_usb_tx_urb_setup */
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG,
+ "Can't allocate URB for bulk out!\n");
+ kfree_skb(skb);
+ return false;
+ }
+ _rtl_install_trx_info(rtlusb, skb, ep_num);
+ usb_fill_bulk_urb(urb, rtlusb->udev, usb_sndbulkpipe(rtlusb->udev,
+ ep_num), skb->data, skb->len, _rtl92s_cmd_complete,
+ skb);
+ urb->transfer_flags |= URB_ZERO_PACKET;
+
+ /* _rtl_submit_tx_urb */
+ usb_anchor_urb(urb, &rtlusb->tx_submitted);
+ if (usb_submit_urb(urb, GFP_ATOMIC) < 0) {
+ RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG,
+ "Failed to submit urb\n");
+ usb_unanchor_urb(urb);
+ kfree_skb(skb);
+ return false;
+ }
+ usb_free_urb(urb);
+
+ return true;
+}
+
+static bool _rtl92s_firmware_downloadcode(struct ieee80211_hw *hw,
+ u8 *code_virtual_address, u32 buffer_len)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct sk_buff *skb;
+ struct rtl_tcb_desc *tcb_desc;
+ unsigned char *seg_ptr;
+ //u16 frag_threshold = MAX_FIRMWARE_CODE_SIZE;
+ u16 frag_threshold = 0xC000;
+ u16 frag_length, frag_offset = 0;
+ u16 extra_descoffset = 0;
+ u8 last_inipkt = 0;
+
+ //_rtl92s_fw_set_rqpn(hw);
+
+ if (buffer_len >= MAX_FIRMWARE_CODE_SIZE) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Size over FIRMWARE_CODE_SIZE!\n");
+
+ return false;
+ }
+
+ extra_descoffset = 0;
+
+ do {
+ if ((buffer_len - frag_offset) > frag_threshold) {
+ frag_length = frag_threshold + extra_descoffset;
+ } else {
+ frag_length = (u16)(buffer_len - frag_offset +
+ extra_descoffset);
+ last_inipkt = 1;
+ }
+
+ /* Allocate skb buffer to contain firmware */
+ /* info and tx descriptor info. */
+ skb = dev_alloc_skb(frag_length);
+ if (!skb)
+ return false;
+ skb_reserve(skb, extra_descoffset);
+ seg_ptr = (u8 *)skb_put(skb, (u32)(frag_length -
+ extra_descoffset));
+ memcpy(seg_ptr, code_virtual_address + frag_offset,
+ (u32)(frag_length - extra_descoffset));
+
+ tcb_desc = (struct rtl_tcb_desc *)(skb->cb);
+ tcb_desc->queue_index = RTL_TXQ_VO;
+ tcb_desc->cmd_or_init = DESC_PACKET_TYPE_INIT;
+ tcb_desc->last_inipkt = last_inipkt;
+
+ _rtl92s_cmd_send_packet(hw, skb, last_inipkt);
+
+ frag_offset += (frag_length - extra_descoffset);
+
+ } while (frag_offset < buffer_len);
+
+ return true ;
+}
+
+static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
+ u8 loadfw_status)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rt_firmware *firmware = (struct rt_firmware *)rtlhal->pfirmware;
+ u32 tmpu4b;
+ u8 cpustatus = 0;
+ short pollingcnt = 1000;
+ bool rtstatus = true;
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "LoadStaus(%d)\n", loadfw_status);
+
+ firmware->fwstatus = (enum fw_status)loadfw_status;
+
+ switch (loadfw_status) {
+ case FW_STATUS_LOAD_IMEM:
+ /* Polling IMEM code done. */
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & IMEM_CODE_DONE)
+ break;
+ udelay(5);
+ } while (pollingcnt--);
+
+ if (!(cpustatus & IMEM_CHK_RPT) || (pollingcnt <= 0)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",
+ cpustatus);
+ goto status_check_fail;
+ }
+ break;
+
+ case FW_STATUS_LOAD_EMEM:
+ /* Check Put Code OK and Turn On CPU */
+ /* Polling EMEM code done. */
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & EMEM_CODE_DONE)
+ break;
+ udelay(5);
+ } while (pollingcnt--);
+
+ if (!(cpustatus & EMEM_CHK_RPT) || (pollingcnt <= 0)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",
+ cpustatus);
+ goto status_check_fail;
+ }
+
+ /* Turn On CPU */
+ rtstatus = _rtl92s_firmware_enable_cpu(hw);
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Enable CPU fail!\n");
+ goto status_check_fail;
+ }
+ break;
+
+ case FW_STATUS_LOAD_DMEM:
+ /* Polling DMEM code done */
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & DMEM_CODE_DONE)
+ break;
+ udelay(5);
+ } while (pollingcnt--);
+
+ if (!(cpustatus & DMEM_CODE_DONE) || (pollingcnt <= 0)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Polling DMEM code done fail ! cpustatus(%#x)\n",
+ cpustatus);
+ goto status_check_fail;
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "DMEM code download success, cpustatus(%#x)\n",
+ cpustatus);
+
+ /* Prevent Delay too much and being scheduled out */
+ /* Polling Load Firmware ready */
+ pollingcnt = 30;
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & FWRDY)
+ break;
+ msleep(100);
+ } while (pollingcnt--);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Polling Load Firmware ready, cpustatus(%x)\n",
+ cpustatus);
+
+ if (((cpustatus & LOAD_FW_READY) != LOAD_FW_READY) ||
+ (pollingcnt <= 0)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Polling Load Firmware ready fail ! cpustatus(%x)\n",
+ cpustatus);
+ goto status_check_fail;
+ }
+
+ /* If right here, we can set TCR/RCR to desired value */
+ /* and config MAC lookback mode to normal mode */
+ tmpu4b = rtl_read_dword(rtlpriv, TCR);
+ rtl_write_dword(rtlpriv, TCR, (tmpu4b & (~TCR_ICV)));
+
+ tmpu4b = rtl_read_dword(rtlpriv, RCR);
+ rtl_write_dword(rtlpriv, RCR, (tmpu4b | RCR_RX_TCPOFDL_EN |
+ RCR_APP_PHYST_RXFF | RCR_APP_ICV | RCR_APP_MIC));
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Current RCR settings(%#x)\n", tmpu4b);
+
+ /* Set to normal mode. */
+ rtl_write_byte(rtlpriv, LBKMD_SEL, LBK_NORMAL);
+ break;
+
+ default:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ "Unknown status check!\n");
+ rtstatus = false;
+ break;
+ }
+
+status_check_fail:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "loadfw_status(%d), rtstatus(%x)\n",
+ loadfw_status, rtstatus);
+ return rtstatus;
+}
+
+int rtl92s_download_fw(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+ struct rt_firmware *firmware = NULL;
+ struct fw_hdr *pfwheader;
+ struct fw_priv *pfw_priv = NULL;
+ u8 *puc_mappedfile = NULL;
+ u32 ul_filelength = 0;
+ u8 fwhdr_size = RT_8192S_FIRMWARE_HDR_SIZE;
+ u8 fwstatus = FW_STATUS_INIT;
+ bool rtstatus = true;
+
+ if (rtlpriv->max_fw_size == 0 || !rtlhal->pfirmware)
+ return 1;
+
+ firmware = (struct rt_firmware *)rtlhal->pfirmware;
+ firmware->fwstatus = FW_STATUS_INIT;
+
+ puc_mappedfile = firmware->sz_fw_tmpbuffer;
+
+ /* 1. Retrieve FW header. */
+ firmware->pfwheader = (struct fw_hdr *) puc_mappedfile;
+ pfwheader = firmware->pfwheader;
+ memset(&pfwheader->fwpriv, 0, sizeof(struct fw_priv));
+ firmware->firmwareversion = byte(pfwheader->version, 0);
+ firmware->pfwheader->fwpriv.hci_sel = 0x12; /* RTL8712_HCI_TYPE_72USB */
+ firmware->pfwheader->fwpriv.usb_ep_num = rtlusb->in_ep_nums +
+ rtlusb->out_ep_nums;
+ firmware->pfwheader->fwpriv.vcs_type = 2;
+ firmware->pfwheader->fwpriv.vcs_mode = 1;
+ firmware->pfwheader->fwpriv.turbo_mode = 1;
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "signature:%x, version:%x, size:%x, imemsize:%x, sram size:%x\n",
+ pfwheader->signature,
+ pfwheader->version, pfwheader->dmem_size,
+ pfwheader->img_imem_size, pfwheader->img_sram_size);
+
+ /* 2. Retrieve IMEM image. */
+ if ((pfwheader->img_imem_size == 0) || (pfwheader->img_imem_size >
+ sizeof(firmware->fw_imem))) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "memory for data image is less than IMEM required\n");
+ goto fail;
+ } else {
+ puc_mappedfile += fwhdr_size;
+
+ memcpy(firmware->fw_imem, puc_mappedfile,
+ pfwheader->img_imem_size);
+ firmware->fw_imem_len = pfwheader->img_imem_size;
+ }
+
+ /* 3. Retriecve EMEM image. */
+ if (pfwheader->img_sram_size > sizeof(firmware->fw_emem)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "memory for data image is less than EMEM required\n");
+ goto fail;
+ } else {
+ puc_mappedfile += firmware->fw_imem_len;
+
+ memcpy(firmware->fw_emem, puc_mappedfile,
+ pfwheader->img_sram_size);
+ firmware->fw_emem_len = pfwheader->img_sram_size;
+ }
+
+ /* 4. download fw now */
+ fwstatus = _rtl92s_firmware_get_nextstatus(firmware->fwstatus);
+ while (fwstatus != FW_STATUS_READY) {
+ /* Image buffer redirection. */
+ switch (fwstatus) {
+ case FW_STATUS_LOAD_IMEM:
+ puc_mappedfile = firmware->fw_imem;
+ ul_filelength = firmware->fw_imem_len;
+ break;
+ case FW_STATUS_LOAD_EMEM:
+ puc_mappedfile = firmware->fw_emem;
+ ul_filelength = firmware->fw_emem_len;
+ break;
+ case FW_STATUS_LOAD_DMEM:
+ /* Partial update the content of header private. */
+ pfwheader = firmware->pfwheader;
+ pfw_priv = &pfwheader->fwpriv;
+ _rtl92s_firmwareheader_priveupdate(hw, pfw_priv);
+ puc_mappedfile = (u8 *)(firmware->pfwheader) +
+ RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
+ ul_filelength = fwhdr_size -
+ RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Unexpected Download step!!\n");
+ goto fail;
+ break;
+ }
+
+ /* <2> Download image file */
+ rtstatus = _rtl92s_firmware_downloadcode(hw, puc_mappedfile,
+ ul_filelength);
+
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+ goto fail;
+ }
+
+ /* <3> Check whether load FW process is ready */
+ rtstatus = _rtl92s_firmware_checkready(hw, fwstatus);
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+ goto fail;
+ }
+
+ fwstatus = _rtl92s_firmware_get_nextstatus(firmware->fwstatus);
+ }
+
+ return rtstatus;
+fail:
+ return 0;
+}
+
+static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen,
+ u32 cmd_num, u32 *pelement_id, u32 *pcmd_len,
+ u8 **pcmb_buffer, u8 *cmd_start_seq)
+{
+ u32 totallen = 0, len = 0, tx_desclen = 0;
+ u32 pre_continueoffset = 0;
+ u8 *ph2c_buffer;
+ u8 i = 0;
+
+ do {
+ /* 8 - Byte aligment */
+ len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
+
+ /* Buffer length is not enough */
+ if (h2cbufferlen < totallen + len + tx_desclen)
+ break;
+
+ /* Clear content */
+ ph2c_buffer = (u8 *)skb_put(skb, (u32)len);
+ memset((ph2c_buffer + totallen + tx_desclen), 0, len);
+
+ /* CMD len */
+ SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen),
+ 0, 16, N_BYTE_ALIGMENT(pcmd_len[i], 8));
+
+ /* CMD ID */
+ SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen),
+ 16, 8, pelement_id[i]);
+
+ /* CMD Sequence */
+ *cmd_start_seq = *cmd_start_seq % 0x80;
+ SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen),
+ 24, 7, *cmd_start_seq);
+ ++*cmd_start_seq;
+
+ /* Copy memory */
+ memcpy((ph2c_buffer + totallen + tx_desclen +
+ H2C_TX_CMD_HDR_LEN), pcmb_buffer[i], pcmd_len[i]);
+
+ /* CMD continue */
+ /* set the continue in prevoius cmd. */
+ if (i < cmd_num - 1)
+ SET_BITS_TO_LE_4BYTE((ph2c_buffer + pre_continueoffset),
+ 31, 1, 1);
+
+ pre_continueoffset = totallen;
+
+ totallen += len;
+ } while (++i < cmd_num);
+
+ return totallen;
+}
+
+static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len)
+{
+ u32 totallen = 0, len = 0, tx_desclen = 0;
+ u8 i = 0;
+
+ do {
+ /* 8 - Byte aligment */
+ len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
+
+ /* Buffer length is not enough */
+ if (h2cbufferlen < totallen + len + tx_desclen)
+ break;
+
+ totallen += len;
+ } while (++i < cmd_num);
+
+ return totallen + tx_desclen;
+}
+
+static bool _rtl92s_firmware_set_h2c_cmd(struct ieee80211_hw *hw, u8 h2c_cmd,
+ u8 *pcmd_buffer)
+{
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_tcb_desc *cb_desc;
+ struct sk_buff *skb;
+ u32 element_id = 0;
+ u32 cmd_len = 0;
+ u32 len;
+
+ switch (h2c_cmd) {
+ case FW_H2C_SETPWRMODE:
+ element_id = H2C_SETPWRMODE_CMD ;
+ cmd_len = sizeof(struct h2c_set_pwrmode_parm);
+ break;
+ case FW_H2C_JOINBSSRPT:
+ element_id = H2C_JOINBSSRPT_CMD;
+ cmd_len = sizeof(struct h2c_joinbss_rpt_parm);
+ break;
+/*
+ case FW_H2C_WOWLAN_UPDATE_GTK:
+ element_id = H2C_WOWLAN_UPDATE_GTK_CMD;
+ cmd_len = sizeof(struct h2c_wpa_two_way_parm);
+ break;
+*/
+ case FW_H2C_WOWLAN_UPDATE_IV:
+ element_id = H2C_WOWLAN_UPDATE_IV_CMD;
+ cmd_len = sizeof(unsigned long long);
+ break;
+ case FW_H2C_WOWLAN_OFFLOAD:
+ element_id = H2C_WOWLAN_FW_OFFLOAD;
+ cmd_len = sizeof(u8);
+ break;
+ case FW_H2C_SITESURVEY:
+ element_id = H2C_SITESURVEY_CMD;
+ cmd_len = sizeof(struct h2c_sitesurvey_parm);
+ break;
+ case FW_H2C_DISCONNECT:
+ element_id = H2C_DISCONNECT_CMD;
+ cmd_len = sizeof(struct h2c_disconnect_parm);
+ break;
+ case FW_H2C_SETCHANNEL:
+ element_id = H2C_SETCHANNEL_CMD;
+ cmd_len = sizeof(struct h2c_setchannel_parm);
+ break;
+ case FW_H2C_SETAUTH:
+ element_id = H2C_SETAUTH_CMD;
+ cmd_len = sizeof(struct h2c_setauth_parm);
+ break;
+ default:
+ break;
+ }
+
+ len = _rtl92s_get_h2c_cmdlen(MAX_TRANSMIT_BUFFER_SIZE, 1, &cmd_len);
+ skb = dev_alloc_skb(len);
+ if (!skb)
+ return false;
+ cb_desc = (struct rtl_tcb_desc *)(skb->cb);
+ cb_desc->queue_index = TXCMD_QUEUE;
+ cb_desc->cmd_or_init = DESC_PACKET_TYPE_NORMAL;
+ cb_desc->last_inipkt = false;
+
+ _rtl92s_fill_h2c_cmd(skb, MAX_TRANSMIT_BUFFER_SIZE, 1, &element_id,
+ &cmd_len, &pcmd_buffer, &rtlhal->h2c_txcmd_seq);
+ _rtl92s_cmd_send_packet(hw, skb, false);
+
+ return true;
+}
+
+void rtl92s_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 Mode)
+{
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct h2c_set_pwrmode_parm pwrmode;
+ u16 max_wakeup_period = 0;
+
+ pwrmode.mode = Mode;
+ pwrmode.flag_low_traffic_en = 0;
+ pwrmode.flag_lpnav_en = 0;
+ pwrmode.flag_rf_low_snr_en = 0;
+ pwrmode.flag_dps_en = 0;
+ pwrmode.bcn_rx_en = 0;
+ pwrmode.bcn_to = 0;
+ SET_BITS_TO_LE_2BYTE((u8 *)(&pwrmode) + 8, 0, 16,
+ mac->vif->bss_conf.beacon_int);
+ pwrmode.app_itv = 0;
+ pwrmode.awake_bcn_itvl = ppsc->reg_max_lps_awakeintvl;
+ pwrmode.smart_ps = 1;
+ pwrmode.bcn_pass_period = 10;
+
+ /* Set beacon pass count */
+ if (pwrmode.mode == FW_PS_MIN_MODE)
+ max_wakeup_period = mac->vif->bss_conf.beacon_int;
+ else if (pwrmode.mode == FW_PS_MAX_MODE)
+ max_wakeup_period = mac->vif->bss_conf.beacon_int *
+ mac->vif->bss_conf.dtim_period;
+
+ if (max_wakeup_period >= 500)
+ pwrmode.bcn_pass_cnt = 1;
+ else if ((max_wakeup_period >= 300) && (max_wakeup_period < 500))
+ pwrmode.bcn_pass_cnt = 2;
+ else if ((max_wakeup_period >= 200) && (max_wakeup_period < 300))
+ pwrmode.bcn_pass_cnt = 3;
+ else if ((max_wakeup_period >= 20) && (max_wakeup_period < 200))
+ pwrmode.bcn_pass_cnt = 5;
+ else
+ pwrmode.bcn_pass_cnt = 1;
+
+ _rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_SETPWRMODE, (u8 *)&pwrmode);
+
+}
+
+void rtl92s_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw,
+ u8 mstatus, u8 ps_qosinfo)
+{
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct h2c_joinbss_rpt_parm joinbss_rpt;
+
+ joinbss_rpt.opmode = mstatus;
+ joinbss_rpt.ps_qos_info = ps_qosinfo;
+ joinbss_rpt.bssid[0] = mac->bssid[0];
+ joinbss_rpt.bssid[1] = mac->bssid[1];
+ joinbss_rpt.bssid[2] = mac->bssid[2];
+ joinbss_rpt.bssid[3] = mac->bssid[3];
+ joinbss_rpt.bssid[4] = mac->bssid[4];
+ joinbss_rpt.bssid[5] = mac->bssid[5];
+ SET_BITS_TO_LE_2BYTE((u8 *)(&joinbss_rpt) + 8, 0, 16,
+ mac->vif->bss_conf.beacon_int);
+ SET_BITS_TO_LE_2BYTE((u8 *)(&joinbss_rpt) + 10, 0, 16, mac->assoc_id);
+
+ _rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_JOINBSSRPT, (u8 *)&joinbss_rpt);
+}
+
+int rtl92s_set_fw_sitesurvey_cmd(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, struct cfg80211_scan_request *req)
+{
+ struct h2c_sitesurvey_parm survey_args;
+
+ memset(&survey_args, 0, sizeof(struct h2c_sitesurvey_parm));
+ survey_args.bsslimit = cpu_to_le32(48);
+
+ if (req->n_ssids) {
+ survey_args.active = cpu_to_le32(1);
+ survey_args.ssidlen = cpu_to_le32(req->ssids[0].ssid_len);
+ memcpy(survey_args.ssid, req->ssids[0].ssid, req->ssids[0].ssid_len);
+ }
+
+ return (int)!_rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_SITESURVEY, (u8 *)&survey_args);
+}
+
+void rtl92s_set_fw_disconnect_cmd(struct ieee80211_hw *hw)
+{
+ struct h2c_disconnect_parm disconnect_args;
+
+ memset(&disconnect_args, 0, sizeof(struct h2c_disconnect_parm));
+
+ _rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_DISCONNECT, (u8 *)&disconnect_args);
+}
+
+u8 rtl92s_set_fw_setchannel_cmd(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct h2c_setchannel_parm chan_args;
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE, "SetChannel: %i\n",
+ rtlphy->current_channel);
+
+ chan_args.channel = cpu_to_le32(rtlphy->current_channel);
+
+ return (u8)_rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_SETCHANNEL, (u8 *)&chan_args);
+}
+
+void rtl92s_set_fw_setauth_cmd(struct ieee80211_hw *hw)
+{
+ struct h2c_setauth_parm auth_args;
+
+ memset(&auth_args, 0, sizeof(struct h2c_setauth_parm));
+ //auth_args.mode = cpu_to_le32(0);
+
+ _rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_SETAUTH, (u8 *)&auth_args);
+}
+
+u8 rtl92s_fw_iocmd(struct ieee80211_hw *hw, u32 cmd)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ int pollcount = 50;
+
+ rtl_write_dword(rtlpriv, IOCMD_CTRL, cmd);
+ msleep(100);
+ while (rtl_read_dword(rtlpriv, IOCMD_CTRL) && pollcount > 0) {
+ pollcount--;
+ msleep(20);
+ }
+
+ return !!pollcount;
+}
+
+void rtl92s_fw_iocmd_data(struct ieee80211_hw *hw, u32 *val, u8 flag)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (flag == 0) { /* set */
+ rtl_write_dword(rtlpriv, IOCMD_DATA, *val);
+ }
+ else { /* query */
+ *val = rtl_read_dword(rtlpriv, IOCMD_DATA);
+ }
+}
+
+u32 rtl92s_fw_iocmd_read(struct ieee80211_hw *hw, u8 ioclass, u16 iovalue, u8 ioindex)
+{
+ u32 tmpcmd, retval;
+
+ tmpcmd = (ioclass << 24) | (iovalue << 8) | ioindex;
+ if (rtl92s_fw_iocmd(hw, tmpcmd))
+ rtl92s_fw_iocmd_data(hw, &retval, 1);
+ else
+ retval = 0;
+
+ return retval;
+}
+
+u8 rtl92s_fw_iocmd_write(struct ieee80211_hw *hw, u8 ioclass, u16 iovalue, u8 ioindex, u32 val)
+{
+ u32 tmpcmd;
+
+ rtl92s_fw_iocmd_data(hw, &val, 0);
+ msleep(100);
+ tmpcmd = (ioclass << 24) | (iovalue << 8) | ioindex;
+ return rtl92s_fw_iocmd(hw, tmpcmd);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/fw.h b/drivers/net/wireless/rtlwifi/rtl8192su/fw.h
new file mode 100644
index 0000000..2e22284
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/fw.h
@@ -0,0 +1,456 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_FIRMWARE92S_H__
+#define __REALTEK_FIRMWARE92S_H__
+
+#define RTL8192_MAX_FIRMWARE_CODE_SIZE (64 * 1024)
+#define RTL8192_MAX_RAW_FIRMWARE_CODE_SIZE 200000
+#define RTL8192_CPU_START_OFFSET 0x80
+/* Firmware Local buffer size. 64k */
+#define MAX_FIRMWARE_CODE_SIZE 0xFF00
+
+#define RT_8192S_FIRMWARE_HDR_SIZE 80
+#define RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE 32
+
+/* support till 64 bit bus width OS */
+#define MAX_DEV_ADDR_SIZE 8
+#define MAX_FIRMWARE_INFORMATION_SIZE 32
+#define MAX_802_11_HEADER_LENGTH (40 + \
+ MAX_FIRMWARE_INFORMATION_SIZE)
+#define ENCRYPTION_MAX_OVERHEAD 128
+#define MAX_FRAGMENT_COUNT 8
+#define MAX_TRANSMIT_BUFFER_SIZE (1600 + \
+ (MAX_802_11_HEADER_LENGTH + \
+ ENCRYPTION_MAX_OVERHEAD) *\
+ MAX_FRAGMENT_COUNT)
+
+#define H2C_TX_CMD_HDR_LEN 8
+
+/* The following DM control code are for Reg0x364, */
+#define FW_DIG_ENABLE_CTL BIT(0)
+#define FW_HIGH_PWR_ENABLE_CTL BIT(1)
+#define FW_SS_CTL BIT(2)
+#define FW_RA_INIT_CTL BIT(3)
+#define FW_RA_BG_CTL BIT(4)
+#define FW_RA_N_CTL BIT(5)
+#define FW_PWR_TRK_CTL BIT(6)
+#define FW_IQK_CTL BIT(7)
+#define FW_FA_CTL BIT(8)
+#define FW_DRIVER_CTRL_DM_CTL BIT(9)
+#define FW_PAPE_CTL_BY_SW_HW BIT(10)
+#define FW_DISABLE_ALL_DM 0
+#define FW_PWR_TRK_PARAM_CLR 0x0000ffff
+#define FW_RA_PARAM_CLR 0xffff0000
+
+enum desc_packet_type {
+ DESC_PACKET_TYPE_INIT = 0,
+ DESC_PACKET_TYPE_NORMAL = 1,
+};
+
+/* 8-bytes alignment required */
+struct fw_priv {
+ /* --- long word 0 ---- */
+ /* 0x12: CE product, 0x92: IT product */
+ u8 signature_0;
+ /* 0x87: CE product, 0x81: IT product */
+ u8 signature_1;
+ /* 0x81: PCI-AP, 01:PCIe, 02: 92S-U,
+ * 0x82: USB-AP, 0x12: 72S-U, 03:SDIO */
+ u8 hci_sel;
+ /* the same value as reigster value */
+ u8 chip_version;
+ /* customer ID low byte */
+ u8 customer_id_0;
+ /* customer ID high byte */
+ u8 customer_id_1;
+ /* 0x11: 1T1R, 0x12: 1T2R,
+ * 0x92: 1T2R turbo, 0x22: 2T2R */
+ u8 rf_config;
+ /* 4: 4EP, 6: 6EP, 11: 11EP */
+ u8 usb_ep_num;
+
+ /* --- long word 1 ---- */
+ /* regulatory class bit map 0 */
+ u8 regulatory_class_0;
+ /* regulatory class bit map 1 */
+ u8 regulatory_class_1;
+ /* regulatory class bit map 2 */
+ u8 regulatory_class_2;
+ /* regulatory class bit map 3 */
+ u8 regulatory_class_3;
+ /* 0:SWSI, 1:HWSI, 2:HWPI */
+ u8 rfintfs;
+ u8 def_nettype;
+ u8 turbo_mode;
+ u8 lowpower_mode;
+
+ /* --- long word 2 ---- */
+ /* 0x00: normal, 0x03: MACLBK, 0x01: PHYLBK */
+ u8 lbk_mode;
+ /* 1: for MP use, 0: for normal
+ * driver (to be discussed) */
+ u8 mp_mode;
+ /* 0: off, 1: on, 2: auto */
+ u8 vcs_type;
+ /* 0: none, 1: RTS/CTS, 2: CTS to self */
+ u8 vcs_mode;
+ u8 rsvd022;
+ u8 rsvd023;
+ u8 rsvd024;
+ u8 rsvd025;
+
+ /* --- long word 3 ---- */
+ /* QoS enable */
+ u8 qos_en;
+ /* 40MHz BW enable */
+ /* 4181 convert AMSDU to AMPDU, 0: disable */
+ u8 bw_40mhz_en;
+ u8 amsdu2ampdu_en;
+ /* 11n AMPDU enable */
+ u8 ampdu_en;
+ /* FW offloads, 0: driver handles */
+ u8 rate_control_offload;
+ /* FW offloads, 0: driver handles */
+ u8 aggregation_offload;
+ u8 rsvd030;
+ u8 rsvd031;
+
+ /* --- long word 4 ---- */
+ /* 1. FW offloads, 0: driver handles */
+ u8 beacon_offload;
+ /* 2. FW offloads, 0: driver handles */
+ u8 mlme_offload;
+ /* 3. FW offloads, 0: driver handles */
+ u8 hwpc_offload;
+ /* 4. FW offloads, 0: driver handles */
+ u8 tcp_checksum_offload;
+ /* 5. FW offloads, 0: driver handles */
+ u8 tcp_offload;
+ /* 6. FW offloads, 0: driver handles */
+ u8 ps_control_offload;
+ /* 7. FW offloads, 0: driver handles */
+ u8 wwlan_offload;
+ u8 rsvd040;
+
+ /* --- long word 5 ---- */
+ /* tcp tx packet length low byte */
+ u8 tcp_tx_frame_len_L;
+ /* tcp tx packet length high byte */
+ u8 tcp_tx_frame_len_H;
+ /* tcp rx packet length low byte */
+ u8 tcp_rx_frame_len_L;
+ /* tcp rx packet length high byte */
+ u8 tcp_rx_frame_len_H;
+ u8 rsvd050;
+ u8 rsvd051;
+ u8 rsvd052;
+ u8 rsvd053;
+};
+
+/* 8-byte alinment required */
+struct fw_hdr {
+
+ /* --- LONG WORD 0 ---- */
+ u16 signature;
+ /* 0x8000 ~ 0x8FFF for FPGA version,
+ * 0x0000 ~ 0x7FFF for ASIC version, */
+ u16 version;
+ /* define the size of boot loader */
+ u32 dmem_size;
+
+
+ /* --- LONG WORD 1 ---- */
+ /* define the size of FW in IMEM */
+ u32 img_imem_size;
+ /* define the size of FW in SRAM */
+ u32 img_sram_size;
+
+ /* --- LONG WORD 2 ---- */
+ /* define the size of DMEM variable */
+ u32 fw_priv_size;
+ u32 rsvd0;
+
+ /* --- LONG WORD 3 ---- */
+ u32 rsvd1;
+ u32 rsvd2;
+
+ struct fw_priv fwpriv;
+
+} ;
+
+enum fw_status {
+ FW_STATUS_INIT = 0,
+ FW_STATUS_LOAD_IMEM = 1,
+ FW_STATUS_LOAD_EMEM = 2,
+ FW_STATUS_LOAD_DMEM = 3,
+ FW_STATUS_READY = 4,
+};
+
+struct rt_firmware {
+ struct fw_hdr *pfwheader;
+ enum fw_status fwstatus;
+ u16 firmwareversion;
+ u8 fw_imem[RTL8192_MAX_FIRMWARE_CODE_SIZE];
+ u8 fw_emem[RTL8192_MAX_FIRMWARE_CODE_SIZE];
+ u32 fw_imem_len;
+ u32 fw_emem_len;
+ u8 sz_fw_tmpbuffer[RTL8192_MAX_RAW_FIRMWARE_CODE_SIZE];
+ u32 sz_fw_tmpbufferlen;
+ u16 cmdpacket_fragthresold;
+};
+
+struct h2c_set_pwrmode_parm {
+ u8 mode;
+ u8 flag_low_traffic_en;
+ u8 flag_lpnav_en;
+ u8 flag_rf_low_snr_en;
+ /* 1: dps, 0: 32k */
+ u8 flag_dps_en;
+ u8 bcn_rx_en;
+ u8 bcn_pass_cnt;
+ /* beacon TO (ms). ¡§=0¡¨ no limit. */
+ u8 bcn_to;
+ u16 bcn_itv;
+ /* only for VOIP mode. */
+ u8 app_itv;
+ u8 awake_bcn_itvl;
+ u8 smart_ps;
+ /* unit: 100 ms */
+ u8 bcn_pass_period;
+};
+
+struct h2c_joinbss_rpt_parm {
+ u8 opmode;
+ u8 ps_qos_info;
+ u8 bssid[6];
+ u16 bcnitv;
+ u16 aid;
+} ;
+
+struct h2c_sitesurvey_parm {
+ u32 active;
+ u32 bsslimit;
+ u32 ssidlen;
+ u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+};
+
+struct h2c_disconnect_parm {
+ u32 rsvd0;
+};
+
+struct h2c_setchannel_parm {
+ u32 channel;
+};
+
+struct h2c_setauth_parm {
+ u8 mode;
+ u8 _1x;
+ u8 rsvd2[2];
+};
+
+struct h2c_wpa_ptk {
+ /* EAPOL-Key Key Confirmation Key (KCK) */
+ u8 kck[16];
+ /* EAPOL-Key Key Encryption Key (KEK) */
+ u8 kek[16];
+ /* Temporal Key 1 (TK1) */
+ u8 tk1[16];
+ union {
+ /* Temporal Key 2 (TK2) */
+ u8 tk2[16];
+ struct {
+ u8 tx_mic_key[8];
+ u8 rx_mic_key[8];
+ } athu;
+ } u;
+};
+
+struct h2c_wpa_two_way_parm {
+ /* algorithm TKIP or AES */
+ u8 pairwise_en_alg;
+ u8 group_en_alg;
+ struct h2c_wpa_ptk wpa_ptk_value;
+} ;
+
+enum h2c_cmd {
+ FW_H2C_SETPWRMODE = 0,
+ FW_H2C_JOINBSSRPT = 1,
+ FW_H2C_WOWLAN_UPDATE_GTK = 2,
+ FW_H2C_WOWLAN_UPDATE_IV = 3,
+ FW_H2C_WOWLAN_OFFLOAD = 4,
+ FW_H2C_SITESURVEY = 5,
+ FW_H2C_DISCONNECT = 6,
+ FW_H2C_SETCHANNEL = 7,
+ FW_H2C_SETOPMODE = 8,
+ FW_H2C_SETAUTH = 8,
+};
+
+enum fw_h2c_cmd {
+ H2C_READ_MACREG_CMD, /*0*/
+ H2C_WRITE_MACREG_CMD,
+ H2C_READBB_CMD,
+ H2C_WRITEBB_CMD,
+ H2C_READRF_CMD,
+ H2C_WRITERF_CMD, /*5*/
+ H2C_READ_EEPROM_CMD,
+ H2C_WRITE_EEPROM_CMD,
+ H2C_READ_EFUSE_CMD,
+ H2C_WRITE_EFUSE_CMD,
+ H2C_READ_CAM_CMD, /*10*/
+ H2C_WRITE_CAM_CMD,
+ H2C_SETBCNITV_CMD,
+ H2C_SETMBIDCFG_CMD,
+ H2C_JOINBSS_CMD,
+ H2C_DISCONNECT_CMD, /*15*/
+ H2C_CREATEBSS_CMD,
+ H2C_SETOPMode_CMD,
+ H2C_SITESURVEY_CMD,
+ H2C_SETAUTH_CMD,
+ H2C_SETKEY_CMD, /*20*/
+ H2C_SETSTAKEY_CMD,
+ H2C_SETASSOCSTA_CMD,
+ H2C_DELASSOCSTA_CMD,
+ H2C_SETSTAPWRSTATE_CMD,
+ H2C_SETBASICRATE_CMD, /*25*/
+ H2C_GETBASICRATE_CMD,
+ H2C_SETDATARATE_CMD,
+ H2C_GETDATARATE_CMD,
+ H2C_SETPHYINFO_CMD,
+ H2C_GETPHYINFO_CMD, /*30*/
+ H2C_SETPHY_CMD,
+ H2C_GETPHY_CMD,
+ H2C_READRSSI_CMD,
+ H2C_READGAIN_CMD,
+ H2C_SETATIM_CMD, /*35*/
+ H2C_SETPWRMODE_CMD,
+ H2C_JOINBSSRPT_CMD,
+ H2C_SETRATABLE_CMD,
+ H2C_GETRATABLE_CMD,
+ H2C_GETCCXREPORT_CMD, /*40*/
+ H2C_GETDTMREPORT_CMD,
+ H2C_GETTXRATESTATICS_CMD,
+ H2C_SETUSBSUSPEND_CMD,
+ H2C_SETH2CLBK_CMD,
+ H2C_TMP1, /*45*/
+ H2C_SETCHANNEL_CMD,
+ H2C_WOWLAN_FW_OFFLOAD,
+ H2C_TMP2,
+ H2C_TMP3,
+ H2C_WOWLAN_UPDATE_IV_CMD, /*50*/
+ H2C_TMP4,
+ MAX_H2CCMD /*52*/
+};
+
+struct ndis_802_11_ssid {
+ u32 ssidlen;
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+};
+
+struct ndis_802_11_configuration_fh {
+ u32 len;
+ u32 hoppattern;
+ u32 hopset;
+ u32 dwelltime;
+};
+
+struct ndis_802_11_configuration {
+ u32 len;
+ u32 beaconperiod;
+ u32 atimwindow;
+ u32 dsconfig;
+ struct ndis_802_11_configuration_fh fhconfig;
+};
+
+struct ndis_wlan_bssid_ex {
+ u32 len;
+ u8 macaddr[6];
+ u8 rsvd10[2];
+ struct ndis_802_11_ssid ssid;
+ u32 privacy;
+ s32 rssi;
+ u32 networktype; // enum
+ struct ndis_802_11_configuration config;
+ u32 inframode; // enum
+ u8 supportedrates[16]; // type
+ u32 ielen;
+ u8 ies[0];
+};
+
+struct ndis_802_11_fixed_ies {
+ u8 timestamp[8];
+ u16 beaconint;
+ u16 caps;
+};
+
+/* The following macros are used for FW
+ * CMD map and parameter updated. */
+#define FW_CMD_IO_CLR(rtlpriv, _Bit) \
+ do { \
+ udelay(1000); \
+ rtlpriv->rtlhal.fwcmd_iomap &= (~_Bit); \
+ } while (0)
+
+#define FW_CMD_IO_UPDATE(rtlpriv, _val) \
+ rtlpriv->rtlhal.fwcmd_iomap = _val;
+
+#define FW_CMD_IO_SET(rtlpriv, _val) \
+ do { \
+ rtl_write_word(rtlpriv, LBUS_MON_ADDR, (u16)_val); \
+ FW_CMD_IO_UPDATE(rtlpriv, _val); \
+ } while (0)
+
+#define FW_CMD_PARA_SET(rtlpriv, _val) \
+ do { \
+ rtl_write_dword(rtlpriv, LBUS_ADDR_MASK, _val); \
+ rtlpriv->rtlhal.fwcmd_ioparam = _val; \
+ } while (0)
+
+#define FW_CMD_IO_QUERY(rtlpriv) \
+ (u16)(rtlpriv->rtlhal.fwcmd_iomap)
+#define FW_CMD_IO_PARA_QUERY(rtlpriv) \
+ ((u32)(rtlpriv->rtlhal.fwcmd_ioparam))
+
+int rtl92s_download_fw(struct ieee80211_hw *hw);
+void rtl92s_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
+void rtl92s_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw,
+ u8 mstatus, u8 ps_qosinfo);
+int rtl92s_set_fw_sitesurvey_cmd(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_scan_request *req);
+void rtl92s_set_fw_disconnect_cmd(struct ieee80211_hw *hw);
+u8 rtl92s_set_fw_setchannel_cmd(struct ieee80211_hw *hw);
+void rtl92s_set_fw_setauth_cmd(struct ieee80211_hw *hw);
+
+u8 rtl92s_fw_iocmd(struct ieee80211_hw *hw, u32 cmd);
+void rtl92s_fw_iocmd_data(struct ieee80211_hw *hw, u32 *val, u8 flag);
+
+u32 rtl92s_fw_iocmd_read(struct ieee80211_hw *hw, u8 ioclass, u16 iovalue, u8 ioindex);
+u8 rtl92s_fw_iocmd_write(struct ieee80211_hw *hw, u8 ioclass, u16 iovalue, u8 ioindex, u32 val);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/hw.c b/drivers/net/wireless/rtlwifi/rtl8192su/hw.c
new file mode 100644
index 0000000..66e1f5e
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/hw.c
@@ -0,0 +1,2573 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../efuse.h"
+#include "../base.h"
+#include "../regd.h"
+#include "../cam.h"
+#include "../ps.h"
+#include "../usb.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "led.h"
+#include "hw.h"
+
+void rtl92su_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+ switch (variable) {
+ case HW_VAR_RCR: {
+ *((u32 *)(val)) = mac->rx_conf;
+ break;
+ }
+ case HW_VAR_RF_STATE: {
+ *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
+ break;
+ }
+ case HW_VAR_FW_PSMODE_STATUS: {
+ *((bool *) (val)) = ppsc->fw_current_inpsmode;
+ break;
+ }
+ case HW_VAR_CORRECT_TSF: {
+ u64 tsf;
+ u32 *ptsf_low = (u32 *)&tsf;
+ u32 *ptsf_high = ((u32 *)&tsf) + 1;
+
+ *ptsf_high = rtl_read_dword(rtlpriv, (TSFR + 4));
+ *ptsf_low = rtl_read_dword(rtlpriv, TSFR);
+
+ *((u64 *) (val)) = tsf;
+
+ break;
+ }
+ case HW_VAR_MRC: {
+ *((bool *)(val)) = rtlpriv->dm.current_mrc_switch;
+ break;
+ }
+ default: {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ break;
+ }
+ }
+}
+
+void rtl92su_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+
+ switch (variable) {
+ case HW_VAR_ETHER_ADDR:{
+ rtl_write_dword(rtlpriv, IDR0, ((u32 *)(val))[0]);
+ rtl_write_word(rtlpriv, IDR4, ((u16 *)(val + 4))[0]);
+ break;
+ }
+ case HW_VAR_BASIC_RATE:{
+ u16 rate_cfg = ((u16 *) val)[0];
+ u8 rate_index = 0;
+
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rate_cfg = rate_cfg & 0x150;
+ else
+ rate_cfg = rate_cfg & 0x15f;
+
+ rate_cfg |= 0x01;
+
+ rtl_write_byte(rtlpriv, RRSR, rate_cfg & 0xff);
+ rtl_write_byte(rtlpriv, RRSR + 1,
+ (rate_cfg >> 8) & 0xff);
+
+ while (rate_cfg > 0x1) {
+ rate_cfg = (rate_cfg >> 1);
+ rate_index++;
+ }
+ rtl_write_byte(rtlpriv, INIRTSMCS_SEL, rate_index);
+
+ break;
+ }
+ case HW_VAR_BSSID:{
+ rtl_write_dword(rtlpriv, BSSIDR, ((u32 *)(val))[0]);
+ rtl_write_word(rtlpriv, BSSIDR + 4,
+ ((u16 *)(val + 4))[0]);
+ break;
+ }
+ case HW_VAR_SIFS:{
+ rtl_write_byte(rtlpriv, SIFS_OFDM, val[0]);
+ rtl_write_byte(rtlpriv, SIFS_OFDM + 1, val[1]);
+ break;
+ }
+ case HW_VAR_SLOT_TIME:{
+ u8 e_aci;
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ "HW_VAR_SLOT_TIME %x\n", val[0]);
+
+ rtl_write_byte(rtlpriv, SLOT_TIME, val[0]);
+
+ for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_AC_PARAM,
+ (u8 *)(&e_aci));
+ }
+ break;
+ }
+ case HW_VAR_ACK_PREAMBLE:{
+ u8 reg_tmp;
+ u8 short_preamble = (bool) (*(u8 *) val);
+ reg_tmp = (mac->cur_40_prime_sc) << 5;
+ if (short_preamble)
+ reg_tmp |= 0x80;
+
+ rtl_write_byte(rtlpriv, RRSR + 2, reg_tmp);
+ break;
+ }
+ case HW_VAR_AMPDU_MIN_SPACE:{
+ u8 min_spacing_to_set;
+ u8 sec_min_space;
+
+ min_spacing_to_set = *((u8 *)val);
+ if (min_spacing_to_set <= 7) {
+ if (rtlpriv->sec.pairwise_enc_algorithm ==
+ NO_ENCRYPTION)
+ sec_min_space = 0;
+ else
+ sec_min_space = 1;
+
+ if (min_spacing_to_set < sec_min_space)
+ min_spacing_to_set = sec_min_space;
+ if (min_spacing_to_set > 5)
+ min_spacing_to_set = 5;
+
+ mac->min_space_cfg =
+ ((mac->min_space_cfg & 0xf8) |
+ min_spacing_to_set);
+
+ *val = min_spacing_to_set;
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
+ mac->min_space_cfg);
+
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+ mac->min_space_cfg);
+ }
+ break;
+ }
+ case HW_VAR_SHORTGI_DENSITY:{
+ u8 density_to_set;
+
+ density_to_set = *((u8 *) val);
+ mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
+ mac->min_space_cfg |= (density_to_set << 3);
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ "Set HW_VAR_SHORTGI_DENSITY: %#x\n",
+ mac->min_space_cfg);
+
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+ mac->min_space_cfg);
+
+ break;
+ }
+ case HW_VAR_AMPDU_FACTOR:{
+ u8 factor_toset;
+ u8 regtoset;
+ u8 factorlevel[18] = {
+ 2, 4, 4, 7, 7, 13, 13,
+ 13, 2, 7, 7, 13, 13,
+ 15, 15, 15, 15, 0};
+ u8 index = 0;
+
+ factor_toset = *((u8 *) val);
+ if (factor_toset <= 3) {
+ factor_toset = (1 << (factor_toset + 2));
+ if (factor_toset > 0xf)
+ factor_toset = 0xf;
+
+ for (index = 0; index < 17; index++) {
+ if (factorlevel[index] > factor_toset)
+ factorlevel[index] =
+ factor_toset;
+ }
+
+ for (index = 0; index < 8; index++) {
+ regtoset = ((factorlevel[index * 2]) |
+ (factorlevel[index *
+ 2 + 1] << 4));
+ rtl_write_byte(rtlpriv,
+ AGGLEN_LMT_L + index,
+ regtoset);
+ }
+
+ regtoset = ((factorlevel[16]) |
+ (factorlevel[17] << 4));
+ rtl_write_byte(rtlpriv, AGGLEN_LMT_H, regtoset);
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ "Set HW_VAR_AMPDU_FACTOR: %#x\n",
+ factor_toset);
+ }
+ break;
+ }
+ case HW_VAR_AC_PARAM:{
+ u8 e_aci = *((u8 *) val);
+ rtl92s_dm_init_edca_turbo(hw);
+
+ if (rtlusb->acm_method != eAcmWay2_SW)
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_ACM_CTRL,
+ (u8 *)(&e_aci));
+ break;
+ }
+ case HW_VAR_ACM_CTRL:{
+ u8 e_aci = *((u8 *) val);
+ union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)(&(
+ mac->ac[0].aifs));
+ u8 acm = p_aci_aifsn->f.acm;
+ u8 acm_ctrl = rtl_read_byte(rtlpriv, AcmHwCtrl);
+
+ acm_ctrl = acm_ctrl | ((rtlusb->acm_method == 2) ?
+ 0x0 : 0x1);
+
+ if (acm) {
+ switch (e_aci) {
+ case AC0_BE:
+ acm_ctrl |= AcmHw_BeqEn;
+ break;
+ case AC2_VI:
+ acm_ctrl |= AcmHw_ViqEn;
+ break;
+ case AC3_VO:
+ acm_ctrl |= AcmHw_VoqEn;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n",
+ acm);
+ break;
+ }
+ } else {
+ switch (e_aci) {
+ case AC0_BE:
+ acm_ctrl &= (~AcmHw_BeqEn);
+ break;
+ case AC2_VI:
+ acm_ctrl &= (~AcmHw_ViqEn);
+ break;
+ case AC3_VO:
+ acm_ctrl &= (~AcmHw_BeqEn);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ break;
+ }
+ }
+
+ RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
+ "HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl);
+ rtl_write_byte(rtlpriv, AcmHwCtrl, acm_ctrl);
+ break;
+ }
+ case HW_VAR_RCR:{
+ rtl_write_dword(rtlpriv, RCR, ((u32 *) (val))[0]);
+ mac->rx_conf = ((u32 *) (val))[0];
+ break;
+ }
+ case HW_VAR_RETRY_LIMIT:{
+ u8 retry_limit = ((u8 *) (val))[0];
+
+ rtl_write_word(rtlpriv, RETRY_LIMIT,
+ retry_limit << RETRY_LIMIT_SHORT_SHIFT |
+ retry_limit << RETRY_LIMIT_LONG_SHIFT);
+ break;
+ }
+ case HW_VAR_DUAL_TSF_RST: {
+ break;
+ }
+ case HW_VAR_EFUSE_BYTES: {
+ rtlefuse->efuse_usedbytes = *((u16 *) val);
+ break;
+ }
+ case HW_VAR_EFUSE_USAGE: {
+ rtlefuse->efuse_usedpercentage = *((u8 *) val);
+ break;
+ }
+ case HW_VAR_IO_CMD: {
+ break;
+ }
+ case HW_VAR_WPA_CONFIG: {
+ rtl_write_byte(rtlpriv, REG_SECR, *((u8 *) val));
+ break;
+ }
+ case HW_VAR_SET_RPWM:{
+ break;
+ }
+ case HW_VAR_H2C_FW_PWRMODE:{
+ break;
+ }
+ case HW_VAR_FW_PSMODE_STATUS: {
+ ppsc->fw_current_inpsmode = *((bool *) val);
+ break;
+ }
+ case HW_VAR_H2C_FW_JOINBSSRPT:{
+ break;
+ }
+ case HW_VAR_AID:{
+ break;
+ }
+ case HW_VAR_CORRECT_TSF:{
+ break;
+ }
+ case HW_VAR_MRC: {
+ bool bmrc_toset = *((bool *)val);
+// u8 u1bdata = 0;
+
+ if (bmrc_toset) {
+/*
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE0, 0x33);
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM1_TRXPATHENABLE,
+ MASKBYTE0);
+ rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+ MASKBYTE0,
+ ((u1bdata & 0xf0) | 0x03));
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM0_TRXPATHENABLE,
+ MASKBYTE1);
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE1,
+ (u1bdata | 0x04));
+*/
+
+ /* Update current settings. */
+ rtlpriv->dm.current_mrc_switch = bmrc_toset;
+ } else {
+/*
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE0, 0x13);
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM1_TRXPATHENABLE,
+ MASKBYTE0);
+ rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+ MASKBYTE0,
+ ((u1bdata & 0xf0) | 0x01));
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM0_TRXPATHENABLE,
+ MASKBYTE1);
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE1, (u1bdata & 0xfb));
+*/
+
+ /* Update current settings. */
+ rtlpriv->dm.current_mrc_switch = bmrc_toset;
+ }
+
+ break;
+ }
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ break;
+ }
+
+}
+
+void rtl92su_enable_hw_security_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 sec_reg_value = 0x0;
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
+ rtlpriv->sec.pairwise_enc_algorithm,
+ rtlpriv->sec.group_enc_algorithm);
+
+ if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "not open hw encryption\n");
+ return;
+ }
+
+ sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
+
+ if (rtlpriv->sec.use_defaultkey) {
+ sec_reg_value |= SCR_TXUSEDK;
+ sec_reg_value |= SCR_RXUSEDK;
+ }
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, "The SECR-value %x\n",
+ sec_reg_value);
+
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
+
+}
+
+static u8 _rtl92su_halset_sysclk(struct ieee80211_hw *hw, u16 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 waitcount = 100;
+ bool bresult = false;
+ u16 tmpvalue;
+
+ rtl_write_word(rtlpriv, SYS_CLKR, data);
+
+ /* Wait the MAC synchronized. */
+ udelay(400);
+
+ /* Check if it is set ready. */
+ tmpvalue = rtl_read_word(rtlpriv, SYS_CLKR);
+ bresult = ((tmpvalue & SYS_FWHW_SEL) == (data & SYS_FWHW_SEL));
+
+ if ((data & (SYS_SWHW_SEL | SYS_FWHW_SEL)) == false) {
+ waitcount = 100;
+ tmpvalue = 0;
+
+ while (1) {
+ waitcount--;
+
+ tmpvalue = rtl_read_word(rtlpriv, SYS_CLKR);
+ if ((tmpvalue & SYS_SWHW_SEL))
+ break;
+
+ pr_err("wait for SYS_SWHW_SEL in %x\n", tmpvalue);
+ if (waitcount == 0)
+ break;
+
+ udelay(10);
+ }
+
+ if (waitcount == 0)
+ bresult = false;
+ else
+ bresult = true;
+ }
+
+ return bresult;
+}
+
+void rtl8192su_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1tmp;
+
+ /* The following config GPIO function */
+ rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+ u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+ /* config GPIO3 to input */
+ u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+ rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+}
+
+static u8 _rtl92su_rf_onoff_detect(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1tmp;
+ u8 retval = ERFON;
+
+ /* The following config GPIO function */
+ rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+ u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+ /* config GPIO3 to input */
+ u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+ rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+ /* On some of the platform, driver cannot read correct
+ * value without delay between Write_GPIO_SEL and Read_GPIO_IN */
+ mdelay(10);
+
+ /* check GPIO3 */
+ u1tmp = rtl_read_byte(rtlpriv, GPIO_IN_SE);
+ retval = (u1tmp & HAL_8192S_HW_GPIO_OFF_BIT) ? ERFON : ERFOFF;
+
+ return retval;
+}
+
+static void _rtl92su_macconfig_before_fwdownload(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ u8 i;
+ u8 tmpu1b;
+ u16 tmpu2b;
+ u8 pollingcnt = 20;
+
+ /* Prevent EFUSE leakage */
+ rtl_write_byte(rtlpriv, REG_EFUSE_TEST + 3, 0xb0);
+ msleep(20);
+ rtl_write_byte(rtlpriv, REG_EFUSE_TEST + 3, 0x30);
+
+ /* Switch to SW IO control */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ if (tmpu2b & SYS_FWHW_SEL) {
+ tmpu2b &= ~(SYS_SWHW_SEL | SYS_FWHW_SEL);
+
+ /* Set failed, return to prevent hang. */
+ if (!_rtl92su_halset_sysclk(hw, tmpu2b))
+ return;
+ }
+
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+ udelay(50);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x54); // 0x34
+ udelay(50);
+
+ /* Reset MAC-IO and CPU and Core Digital BIT(10)/11/15 */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+ tmpu1b &= 0x73;
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+ /* wait for BIT 10/11/15 to pull high automatically!! */
+ mdelay(1);
+
+ rtl_write_byte(rtlpriv, SPS0_CTRL + 1, 0x53);
+ rtl_write_byte(rtlpriv, SPS0_CTRL + 0, 0x57);
+
+ rtl_write_byte(rtlpriv, CMDR, 0);
+ rtl_write_byte(rtlpriv, TCR, 0);
+
+ /* Enable AFE clock source */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+ /* Delay 1.5ms */
+ mdelay(2);
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+ /* Enable AFE Macro Block's Bandgap */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | AFE_BGEN));
+ mdelay(1);
+
+ /* Enable AFE Mbias */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | AFE_MBEN |
+ AFE_MISC_I32_EN));
+ mdelay(1);
+
+ /* Enable LDOA15 block */
+ tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | LDA15_EN));
+
+ /* Enable LDOV12D block */
+ tmpu1b = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+ rtl_write_byte(rtlpriv, LDOV12D_CTRL, (tmpu1b | LDV12_EN));
+
+ /* Set Digital Vdd to Retention isolation Path. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
+ rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | ISO_PWC_DV2RP));
+
+ /* For warm reboot NIC disappear bug. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+ /* Support 64k IMEM */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1);
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, (tmpu1b & 0x68));
+
+ /* Enable AFE PLL Macro Block */
+ /* We need to delay 100u before enabling PLL. */
+ udelay(200);
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+
+ /* for divider reset */
+ udelay(500);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) |
+ BIT(4) | BIT(6)));
+ udelay(500);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+ udelay(500);
+
+ /* Enable MAC 80MHZ clock */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Release isolation AFE PLL & MD */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL);
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, (tmpu1b & 0xee));
+
+ /* Switch to 40MHz clock */
+ rtl_write_byte(rtlpriv, SYS_CLKR, 0x00);
+ /* Disable CPU clock and 80MHz SSC to fix FW download timing issue */
+ tmpu1b = rtl_read_byte(rtlpriv, SYS_CLKR);
+ rtl_write_byte(rtlpriv, SYS_CLKR, (tmpu1b | 0xa0));
+ /* Enable MAC clock */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+ rtl_write_byte(rtlpriv, PMC_FSM, 0x02);
+
+ /* Enable Core digital and enable IOREG R/W */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11)));
+
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b & ~(BIT(7)));
+
+ /* enable REG_EN */
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+ /* Switch the control path. */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & ~SYS_CPU_CLKSEL));
+
+ tmpu2b = ((tmpu2b | SYS_FWHW_SEL) & (~SYS_SWHW_SEL));
+ if (!_rtl92su_halset_sysclk(hw, tmpu2b))
+ return; /* Set failed, return to prevent hang. */
+
+ rtl_write_word(rtlpriv, CMDR, 0x07FC);
+
+ /* MH We must enable the section of code to prevent load IMEM fail. */
+ /* Load MAC register from WMAc temporarily We simulate macreg. */
+ /* txt HW will provide MAC txt later */
+ rtl_write_byte(rtlpriv, 0x6, 0x30);
+
+ rtl_write_byte(rtlpriv, RCR + 1, 0xf0);
+ rtl_write_byte(rtlpriv, RCR + 3, 0x81);
+
+ rtl_write_byte(rtlpriv, PBP, 0x21);
+
+ rtl_write_byte(rtlpriv, TXDESC_MSK, 0xff);
+ rtl_write_byte(rtlpriv, TXDESC_MSK + 1, 0xff);
+ rtl_write_byte(rtlpriv, TXDESC_MSK + 2, 0xff);
+ rtl_write_byte(rtlpriv, TXDESC_MSK + 3, 0xff);
+
+ rtl_write_byte(rtlpriv, RXFILTERMAP_GP2, 0x00);
+ rtl_write_byte(rtlpriv, RXFILTERMAP_GP2 + 1, 0x00);
+
+ for (i = 0; i < 32; i++)
+ rtl_write_byte(rtlpriv, INIMCS_SEL + i, 0x1b);
+
+/*
+ rtl_write_byte(rtlpriv, CFEND_TH, 0xff);
+
+ rtl_write_byte(rtlpriv, DBG_PORT, 0x91);
+*/
+
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+ /* Fix USB RX FIFO error */
+ rtl_write_byte(rtlpriv, 0xFE5C, rtl_read_byte(rtlpriv, 0xFE5C) |
+ BIT(7));
+
+ /* Fix 8051 ROM incorrect code operation */
+ rtl_write_byte(rtlpriv, 0xFE1C, 0x80);
+
+ /* To make sure that TxDMA can ready to download FW. */
+ /* We should reset TxDMA if IMEM RPT was not ready. */
+ do {
+ tmpu1b = rtl_read_byte(rtlpriv, TCR);
+ if ((tmpu1b & TXDMA_INIT_VALUE) == TXDMA_INIT_VALUE)
+ break;
+
+ udelay(5);
+ } while (pollingcnt--);
+
+ if (pollingcnt <= 0) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
+ tmpu1b);
+ tmpu1b = rtl_read_byte(rtlpriv, CMDR);
+ rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
+ udelay(2);
+ /* Reset TxDMA */
+ rtl_write_byte(rtlpriv, CMDR, tmpu1b | TXDMA_EN);
+ }
+
+ /* After MACIO reset,we must refresh LED state. */
+ if ((ppsc->rfoff_reason == RF_CHANGE_BY_IPS) ||
+ (ppsc->rfoff_reason == 0)) {
+ struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
+ struct rtl_led *pLed0 = &(usbpriv->ledctl.sw_led0);
+ enum rf_pwrstate rfpwr_state_toset;
+ rfpwr_state_toset = _rtl92su_rf_onoff_detect(hw);
+
+ if (rfpwr_state_toset == ERFON)
+ rtl92su_sw_led_on(hw, pLed0);
+ }
+}
+
+static void _rtl92su_macconfig_after_fwdownload(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u8 i;
+ u16 tmpu2b;
+
+ /* 1. System Configure Register (Offset: 0x0000 - 0x003F) */
+
+ /* 2. Command Control Register (Offset: 0x0040 - 0x004F) */
+ /* Turn on 0x40 Command register */
+ rtl_write_word(rtlpriv, CMDR, (BBRSTN | BB_GLB_RSTN |
+ SCHEDULE_EN | MACRXEN | MACTXEN | DDMA_EN | FW2HW_EN |
+ RXDMA_EN | TXDMA_EN | HCI_RXDMA_EN | HCI_TXDMA_EN));
+
+ /* Set TCR TX DMA pre 2 FULL enable bit */
+/*
+ rtl_write_dword(rtlpriv, TCR, rtl_read_dword(rtlpriv, TCR) |
+ TXDMAPRE2FULL);
+*/
+
+ /* Set RCR */
+ rtl_write_dword(rtlpriv, RCR, mac->rx_conf);
+
+ /* 3. MACID Setting Register (Offset: 0x0050 - 0x007F) */
+
+ /* 4. Timing Control Register (Offset: 0x0080 - 0x009F) */
+ /* Set CCK/OFDM SIFS */
+ /* CCK SIFS shall always be 10us. */
+ rtl_write_word(rtlpriv, SIFS_CCK, 0x0a0a);
+ rtl_write_word(rtlpriv, SIFS_OFDM, 0x1010);
+
+ /* Set AckTimeout */
+ rtl_write_byte(rtlpriv, ACK_TIMEOUT, 0x40);
+
+ /* Beacon related */
+ rtl_write_word(rtlpriv, BCN_INTERVAL, 100);
+ rtl_write_word(rtlpriv, ATIMWND, 2);
+
+ /* 5. FIFO Control Register (Offset: 0x00A0 - 0x015F) */
+ tmpu2b = rtl_read_word(rtlpriv, RXFILTERMAP);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "MgtRxFilter: %04x\n", tmpu2b);
+ tmpu2b &= ~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) |
+ BIT(10) | BIT(11) | BIT(12) | BIT(13));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "MgtRxFilter: %04x\n", tmpu2b);
+ rtl_write_word(rtlpriv, RXFILTERMAP, tmpu2b);
+ rtl_write_word(rtlpriv, RXFILTERMAP_GP1, 0x0000);
+ rtl_write_word(rtlpriv, RXFILTERMAP_GP2, 0x0000);
+ /* 5.1 Initialize Number of Reserved Pages in Firmware Queue */
+ /* Firmware allocate now, associate with FW internal setting.!!! */
+
+ /* 5.2 Setting TX/RX page size 0/1/2/3/4=64/128/256/512/1024 */
+ rtl_write_byte(rtlpriv, PBP, rtl_read_byte(rtlpriv, PBP) | BIT(0));
+ /* 5.3 Set driver info, we only accept PHY status now. */
+ /* 5.4 Set RXDMA arbitration to control RXDMA/MAC/FW R/W for RXFIFO */
+ /* Set USB RX aggregation */
+ rtl_write_byte(rtlpriv, RXDMA, rtl_read_byte(rtlpriv, RXDMA) | RXDMA_AGG_EN);
+ //rtl_write_byte(rtlpriv, RXDMA, rtl_read_byte(rtlpriv, RXDMA) | BIT(6));
+ /* Set TH=1 */
+ rtl_write_byte(rtlpriv, RXDMA_AGG_PG_TH, 1);
+
+ /* 6. Adaptive Control Register (Offset: 0x0160 - 0x01CF) */
+ /* Set RRSR to all legacy rate and HT rate
+ * CCK rate is supported by default.
+ * CCK rate will be filtered out only when associated
+ * AP does not support it.
+ * Only enable ACK rate to OFDM 24M
+ * Disable RRSR for CCK rate in A-Cut */
+
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rtl_write_byte(rtlpriv, RRSR, 0xf0);
+ else if (rtlhal->version == VERSION_8192S_BCUT)
+ rtl_write_byte(rtlpriv, RRSR, 0xff);
+ rtl_write_byte(rtlpriv, RRSR + 1, 0x01);
+ rtl_write_byte(rtlpriv, RRSR + 2, 0x00);
+
+ /* A-Cut IC do not support CCK rate. We forbid ARFR to */
+ /* fallback to CCK rate */
+ for (i = 0; i < 8; i++) {
+ /*Disable RRSR for CCK rate in A-Cut */
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rtl_write_dword(rtlpriv, ARFR0 + i * 4, 0x1f0ff0f0);
+ }
+
+ /* Different rate use different AMPDU size */
+ /* MCS32/ MCS15_SG use max AMPDU size 15*2=30K */
+ rtl_write_byte(rtlpriv, AGGLEN_LMT_H, 0x0f);
+ /* MCS0/1/2/3 use max AMPDU size 4*2=8K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L, 0x7442);
+ /* MCS4/5 use max AMPDU size 8*2=16K 6/7 use 10*2=20K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L + 2, 0xddd7);
+ /* MCS8/9 use max AMPDU size 8*2=16K 10/11 use 10*2=20K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L + 4, 0xd772);
+ /* MCS12/13/14/15 use max AMPDU size 15*2=30K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L + 6, 0xfffd);
+
+ /* Set Data / Response auto rate fallack retry count */
+ rtl_write_dword(rtlpriv, DARFRC, 0x04010000);
+ rtl_write_dword(rtlpriv, DARFRC + 4, 0x09070605);
+ rtl_write_dword(rtlpriv, RARFRC, 0x04010000);
+ rtl_write_dword(rtlpriv, RARFRC + 4, 0x09070605);
+
+ /* 7. EDCA Setting Register (Offset: 0x01D0 - 0x01FF) */
+ /* Set all rate to support SG */
+ rtl_write_word(rtlpriv, SG_RATE, 0xFFFF);
+
+ /* 8. WMAC, BA, and CCX related Register (Offset: 0x0200 - 0x023F) */
+ /* Set NAV protection length */
+ rtl_write_word(rtlpriv, NAV_PROT_LEN, 0x0080);
+ /* CF-END Threshold */
+ rtl_write_byte(rtlpriv, CFEND_TH, 0xFF);
+ /* Set AMPDU minimum space */
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, 0x07);
+ /* Set TXOP stall control for several queue/HI/BCN/MGT/ */
+ rtl_write_byte(rtlpriv, TXOP_STALL_CTRL, 0x00);
+
+ /* 9. Security Control Register (Offset: 0x0240 - 0x025F) */
+ /* 10. Power Save Control Register (Offset: 0x0260 - 0x02DF) */
+ /* 11. General Purpose Register (Offset: 0x02E0 - 0x02FF) */
+ /* 12. Host Interrupt Status Register (Offset: 0x0300 - 0x030F) */
+ /* 13. Test Mode and Debug Control Register (Offset: 0x0310 - 0x034F) */
+
+ /* 14. Set driver info, we only accept PHY status now. */
+ rtl_write_byte(rtlpriv, RXDRVINFO_SZ, 4);
+
+ /* 15. For EEPROM R/W Workaround */
+ /* 16. For EFUSE to share REG_SYS_FUNC_EN with EEPROM!!! */
+/*
+ tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, tmpu2b | BIT(13));
+ tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL);
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, tmpu2b & (~BIT(8)));
+*/
+
+ /* 17. For EFUSE */
+#if 0
+ /* We may R/W EFUSE in EEPROM mode */
+ if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+ u8 tempval;
+
+ tempval = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1);
+ tempval &= 0xFE;
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, tempval);
+
+ /* Change Program timing */
+ rtl_write_byte(rtlpriv, REG_EFUSE_CTRL + 3, 0x72);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "EFUSE CONFIG OK\n");
+ }
+#endif
+
+ /* Set USB DMA Aggregation Timeout: 1.7/4ms */
+ rtl_write_byte(rtlpriv, REG_USB_DMA_AGG_TO, 0x04);
+ /* Fix USB RX FIFO error */
+ rtl_write_byte(rtlpriv, 0xFE5C, rtl_read_byte(rtlpriv, 0xFE5C) |
+ BIT(7));
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "OK\n");
+
+}
+
+static void _rtl92su_hw_configure(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+ u8 reg_bw_opmode = 0;
+ u32 reg_rrsr = 0;
+ u8 regtmp = 0;
+
+ reg_bw_opmode = BW_OPMODE_20MHZ;
+ reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+
+ regtmp = rtl_read_byte(rtlpriv, INIRTSMCS_SEL);
+ reg_rrsr = ((reg_rrsr & 0x000fffff) << 8) | regtmp;
+ rtl_write_dword(rtlpriv, INIRTSMCS_SEL, reg_rrsr);
+ rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+
+ rtl_write_byte(rtlpriv, MLT, 0x8f);
+
+ /* For Min Spacing configuration. */
+ switch (rtlphy->rf_type) {
+ case RF_1T2R:
+ case RF_1T1R:
+ rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
+ break;
+ case RF_2T2R:
+ case RF_2T2R_GREEN:
+ rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
+ break;
+ }
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, rtlhal->minspace_cfg);
+}
+
+void rtl92su_read_chip_version(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u8 tmp_byte;
+
+ tmp_byte = (rtl_read_dword(rtlpriv, PMC_FSM) >> 15) & 0x1F;
+ if (tmp_byte != 0x3) {
+ tmp_byte = (tmp_byte >> 1) + 1;
+ if (tmp_byte > 0x3)
+ tmp_byte = 0x2; /* default to BCUT */
+ }
+ rtlhal->version = (enum version_8192s)tmp_byte;
+ rtlhal->hw_type = HARDWARE_TYPE_RTL8192SU;
+}
+
+int rtl92su_hw_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ //u8 tmp_byte = 0;
+
+ bool rtstatus = true;
+ //u8 tmp_u1b;
+ int err = false;
+ u8 i;
+ int wdcapra_add[] = {
+ EDCAPARA_BE, EDCAPARA_BK,
+ EDCAPARA_VI, EDCAPARA_VO};
+ u8 secr_value = 0x0;
+
+ rtlhal->h2c_txcmd_seq = 0x01;
+
+ rtl_write_byte(rtlpriv, REG_USB_HRPWM, 0x00);
+
+ /* 1. MAC Initialize */
+ /* Before FW download, we have to set some MAC register */
+ _rtl92su_macconfig_before_fwdownload(hw);
+
+ rtl8192su_gpiobit3_cfg_inputmode(hw);
+
+ /* 2. download firmware */
+ rtstatus = rtl92s_download_fw(hw);
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ "Failed to download FW. Init HW without FW now... "
+ "Please copy FW into /lib/firmware/rtlwifi\n");
+ return 1;
+ }
+
+ /* After FW download, we have to reset MAC register */
+ _rtl92su_macconfig_after_fwdownload(hw);
+
+ /*Retrieve default FW Cmd IO map. */
+ //rtlhal->fwcmd_iomap = rtl_read_word(rtlpriv, LBUS_MON_ADDR);
+ //rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK);
+
+ /* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
+ if (!rtl92s_phy_mac_config(hw)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
+ return rtstatus;
+ }
+
+ /* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
+ /* We must set flag avoid BB/RF config period later!! */
+ //rtl_write_dword(rtlpriv, CMDR, 0x37FC);
+
+ /* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
+ if (!rtl92s_phy_bb_config(hw)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
+ return rtstatus;
+ }
+
+ /* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
+ /* Before initalizing RF. We can not use FW to do RF-R/W. */
+
+ rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
+
+ /* RF Power Save */
+#if 0
+ /* H/W or S/W RF OFF before sleep. */
+ if (rtlpriv->psc.rfoff_reason > RF_CHANGE_BY_PS) {
+ u32 rfoffreason = rtlpriv->psc.rfoff_reason;
+
+ rtlpriv->psc.rfoff_reason = RF_CHANGE_BY_INIT;
+ rtlpriv->psc.rfpwr_state = ERFON;
+ /* FIXME: check spinlocks if this block is uncommented */
+ rtl_ps_set_rf_state(hw, ERFOFF, rfoffreason);
+ } else {
+ /* gpio radio on/off is out of adapter start */
+ if (rtlpriv->psc.hwradiooff == false) {
+ rtlpriv->psc.rfpwr_state = ERFON;
+ rtlpriv->psc.rfoff_reason = 0;
+ }
+ }
+#endif
+
+ /* Before RF-R/W we must execute the IO from Scott's suggestion. */
+/*
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB);
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rtl_write_byte(rtlpriv, SPS1_CTRL + 3, 0x07);
+ else
+ rtl_write_byte(rtlpriv, RF_CTRL, 0x07);
+*/
+
+ if (!rtl92s_phy_rf_config(hw)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
+ return rtstatus;
+ }
+
+ /* After read predefined TXT, we must set BB/MAC/RF
+ * register as our requirement */
+
+/*
+ rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw,
+ (enum radio_path)0,
+ RF_CHNLBW,
+ RFREG_OFFSET_MASK);
+ rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw,
+ (enum radio_path)1,
+ RF_CHNLBW,
+ RFREG_OFFSET_MASK);
+*/
+
+ /*---- Set CCK and OFDM Block "ON"----*/
+ //rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
+ //rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
+
+ /*3 Set Hardware(Do nothing now) */
+ _rtl92su_hw_configure(hw);
+
+ /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
+ /* TX power index for different rate set. */
+ /* Get original hw reg values */
+ //rtl92s_phy_get_hw_reg_originalvalue(hw);
+ /* Write correct tx power index */
+ rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+
+ /* We must set MAC address after firmware download. */
+ for (i = 0; i < 6; i++)
+ rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+ /* EEPROM R/W workaround */
+/*
+ tmp_u1b = rtl_read_byte(rtlpriv, MAC_PINMUX_CFG);
+ rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, tmp_u1b & (~BIT(3)));
+
+ rtl_write_byte(rtlpriv, 0x4d, 0x0);
+
+ if (hal_get_firmwareversion(rtlpriv) >= 0x49) {
+ tmp_byte = rtl_read_byte(rtlpriv, FW_RSVD_PG_CRTL) & (~BIT(4));
+ tmp_byte = tmp_byte | BIT(5);
+ rtl_write_byte(rtlpriv, FW_RSVD_PG_CRTL, tmp_byte);
+ rtl_write_dword(rtlpriv, TXDESC_MSK, 0xFFFFCFFF);
+ }
+*/
+
+ /* We enable high power and RA related mechanism after NIC
+ * initialized. */
+ //rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
+
+ /* Add to prevent ASPM bug. */
+ /* Always enable hst and NIC clock request. */
+ //rtl92s_phy_switch_ephy_parameter(hw);
+
+ /* Security related
+ * 1. Clear all H/W keys.
+ * 2. Enable H/W encryption/decryption. */
+ rtl_cam_reset_all_entry(hw);
+ secr_value |= SCR_TXENCENABLE;
+ secr_value |= SCR_RXENCENABLE;
+ secr_value |= SCR_NOSKMC;
+ rtl_write_byte(rtlpriv, REG_SECR, secr_value);
+
+ for (i = 0; i < 4; i++)
+ rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322);
+
+ if (rtlphy->rf_type == RF_1T2R) {
+ bool mrc2set = true;
+ /* Turn on B-Path */
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set);
+ }
+
+ rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
+ rtl92s_dm_init(hw);
+
+ /* give fw time to boot */
+ msleep(500);
+
+ return err;
+}
+
+void rtl92su_set_mac_addr(struct rtl_io *io, const u8 * addr)
+{
+}
+
+void rtl92su_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u32 reg_rcr = mac->rx_conf;
+
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
+
+ if (check_bssid) {
+ reg_rcr |= (RCR_CBSSID);
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
+ } else if (!check_bssid) {
+ reg_rcr &= (~RCR_CBSSID);
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
+ }
+
+}
+
+static void _rtl92s_cmd_complete(struct urb *urb)
+{
+}
+
+static int _rtl92su_set_media_status(struct ieee80211_hw *hw,
+ enum nl80211_iftype type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ //u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
+ //u32 temp;
+ struct sk_buff *skb;
+ struct rtl_tcb_desc *tcb_desc;
+
+ //bt_msr &= ~MSR_LINK_MASK;
+
+ skb = dev_alloc_skb(RTL_TX_HEADER_SIZE + 8 + IEEE80211_MAX_FRAME_LEN);
+ tcb_desc = (struct rtl_tcb_desc *)(skb->cb);
+ tcb_desc->queue_index = RTL_TXQ_MGT;
+ tcb_desc->cmd_or_init = DESC_PACKET_TYPE_NORMAL;
+ tcb_desc->last_inipkt = 1;
+ // _rtl92s_cmd_send_packet
+ {
+ struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+ struct urb *urb;
+ u8 *pdesc, *fwcmd_hdr, *fwcmd;
+ u32 ep_num;
+
+ pdesc = (u8 *)skb_push(skb, RTL_TX_HEADER_SIZE);
+
+ // _rtl92s_fill_h2c_cmd
+ fwcmd_hdr = (u8 *)skb_put(skb, 8);
+ memset(fwcmd_hdr, 0, 8);
+ fwcmd_hdr[0] = 0x08; // size
+ fwcmd_hdr[1] = 0x00; // size
+ fwcmd_hdr[2] = 0x11; // cmd code
+ fwcmd_hdr[3] = rtlhal->h2c_txcmd_seq++; // seq#
+
+ fwcmd = (u8 *)skb_put(skb, 8); // 4 rounded up to 8
+ memset(fwcmd, 0, 8);
+ fwcmd[0] = 0x02; // AutoUnknown
+
+ rtlpriv->cfg->ops->fill_tx_cmddesc(hw, pdesc, 1, 1, skb);
+
+ ep_num = rtlusb->ep_map.ep_mapping[tcb_desc->queue_index];
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ kfree_skb(skb);
+ return 1;
+ }
+ usb_fill_bulk_urb(urb, rtlusb->udev, usb_sndbulkpipe(rtlusb->udev,
+ ep_num), skb->data, skb->len, _rtl92s_cmd_complete,
+ skb);
+ urb->transfer_flags |= URB_ZERO_PACKET;
+
+ usb_anchor_urb(urb, &rtlusb->tx_submitted);
+ if (usb_submit_urb(urb, GFP_ATOMIC) < 0) {
+ usb_unanchor_urb(urb);
+ kfree_skb(skb);
+ return 1;
+ }
+ usb_free_urb(urb);
+ }
+
+ switch (type) {
+ case NL80211_IFTYPE_UNSPECIFIED:
+ //bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "Set Network type to NO LINK!\n");
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ //bt_msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "Set Network type to Ad Hoc!\n");
+ break;
+ case NL80211_IFTYPE_STATION:
+ //bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "Set Network type to STA!\n");
+ break;
+ case NL80211_IFTYPE_AP:
+ //bt_msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "Set Network type to AP!\n");
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Network type %d not supported!\n", type);
+ return 1;
+ break;
+
+ }
+
+ //rtl_write_byte(rtlpriv, (MSR), bt_msr);
+
+ //temp = rtl_read_dword(rtlpriv, TCR);
+ //rtl_write_dword(rtlpriv, TCR, temp & (~BIT(8)));
+ //rtl_write_dword(rtlpriv, TCR, temp | BIT(8));
+
+ return 0;
+}
+
+/* HW_VAR_MEDIA_STATUS & HW_VAR_CECHK_BSSID */
+int rtl92su_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (_rtl92su_set_media_status(hw, type))
+ return -EOPNOTSUPP;
+
+ if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+ if (type != NL80211_IFTYPE_AP)
+ rtl92su_set_check_bssid(hw, true);
+ } else {
+ rtl92su_set_check_bssid(hw, false);
+ }
+
+ return 0;
+}
+
+/* don't set REG_EDCA_BE_PARAM here because mac80211 will send pkt when scan */
+void rtl92su_set_qos(struct ieee80211_hw *hw, int aci)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ rtl92s_dm_init_edca_turbo(hw);
+
+ switch (aci) {
+ case AC1_BK:
+ rtl_write_dword(rtlpriv, EDCAPARA_BK, 0xa44f);
+ break;
+ case AC0_BE:
+ /* rtl_write_dword(rtlpriv, EDCAPARA_BE, u4b_ac_param); */
+ break;
+ case AC2_VI:
+ rtl_write_dword(rtlpriv, EDCAPARA_VI, 0x5e4322);
+ break;
+ case AC3_VO:
+ rtl_write_dword(rtlpriv, EDCAPARA_VO, 0x2f3222);
+ break;
+ default:
+ RT_ASSERT(false, "invalid aci: %d !\n", aci);
+ break;
+ }
+}
+
+void rtl92su_enable_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+
+ rtl_write_dword(rtlpriv, INTA_MASK, rtlusb->irq_mask[0]);
+ /* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */
+ rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlusb->irq_mask[1] & 0x3F);
+}
+
+void rtl92su_disable_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv;
+
+ rtlpriv = rtl_priv(hw);
+ /* if firmware not available, no interrupts */
+ if (!rtlpriv || !rtlpriv->max_fw_size)
+ return;
+ rtl_write_dword(rtlpriv, INTA_MASK, 0);
+ rtl_write_dword(rtlpriv, INTA_MASK + 4, 0);
+}
+
+
+static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 waitcnt = 100;
+ bool result = false;
+ u8 tmp;
+
+ rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
+
+ /* Wait the MAC synchronized. */
+ udelay(400);
+
+ /* Check if it is set ready. */
+ tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+ result = ((tmp & BIT(7)) == (data & BIT(7)));
+
+ if ((data & (BIT(6) | BIT(7))) == false) {
+ waitcnt = 100;
+ tmp = 0;
+
+ while (1) {
+ waitcnt--;
+ tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+
+ if ((tmp & BIT(6)))
+ break;
+
+ pr_err("wait for BIT(6) return value %x\n", tmp);
+
+ if (waitcnt == 0)
+ break;
+ udelay(10);
+ }
+
+ if (waitcnt == 0)
+ result = false;
+ else
+ result = true;
+ }
+
+ return result;
+}
+
+static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ //struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ u8 u1btmp;
+
+ /* Power save for BB/RF */
+ u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+ u1btmp &= ~LDV12_EN;
+ rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+ rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+ rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+ rtl_write_byte(rtlpriv, RF_CTRL, 0x00);
+/*
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+ udelay(100);
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ udelay(10);
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+ udelay(10);
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ udelay(10);
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+ rtl_write_word(rtlpriv, CMDR, 0x0000);
+
+ if (rtlhal->driver_going2unload) {
+ u1btmp = rtl_read_byte(rtlpriv, (REG_SYS_FUNC_EN + 1));
+ u1btmp &= ~(BIT(0));
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1btmp);
+ }
+*/
+
+ u1btmp = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+
+ /* Add description. After switch control path. register
+ * after page1 will be invisible. We can not do any IO
+ * for register>0x40. After resume&MACIO reset, we need
+ * to remember previous reg content. */
+ if (u1btmp & BIT(7)) {
+ u1btmp &= ~(BIT(6) | BIT(7));
+ if (!_rtl92s_set_sysclk(hw, u1btmp)) {
+ pr_err("Switch ctrl path fail\n");
+ return;
+ }
+ }
+
+#if 0
+ /* Power save for MAC */
+ if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS &&
+ !rtlhal->driver_going2unload) {
+ /* enable LED function */
+ rtl_write_byte(rtlpriv, 0x03, 0xF9);
+ /* SW/HW radio off or halt adapter!! For example S3/S4 */
+ } else {
+ /* LED function disable. Power range is about 8mA now. */
+ /* if write 0xF1 disconnet_pci power
+ * ifconfig wlan0 down power are both high 35:70 */
+ /* if write oxF9 disconnet_pci power
+ * ifconfig wlan0 down power are both low 12:45*/
+ rtl_write_byte(rtlpriv, 0x03, 0xF9);
+ }
+#endif
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x70);
+ rtl_write_byte(rtlpriv, PMC_FSM, 0x06);
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xf9);
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0xe8);
+
+ //rtl_write_byte(rtlpriv, SYS_CLKR + 1, 0x70);
+ //rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, 0x68);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x00);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x54); // 0x34
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x50);
+ //rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, 0x0E);
+ rtl_write_byte(rtlpriv, AFE_MISC, 0x30);
+ rtl_write_byte(rtlpriv, SPS0_CTRL, 0x56);
+ rtl_write_byte(rtlpriv, SPS0_CTRL + 1, 0x43);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
+}
+
+static void _rtl92su_gen_refreshledstate(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
+ struct rtl_led *pLed0 = &(usbpriv->ledctl.sw_led0);
+ return;
+
+ if (rtlpriv->psc.rfoff_reason == RF_CHANGE_BY_IPS)
+ rtl92su_sw_led_on(hw, pLed0);
+ else
+ rtl92su_sw_led_off(hw, pLed0);
+}
+
+static void _rtl92su_power_domain_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 tmpu2b;
+ u8 tmpu1b;
+
+ rtlpriv->psc.pwrdomain_protect = true;
+
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ if (tmpu1b & BIT(7)) {
+ tmpu1b &= ~(BIT(6) | BIT(7));
+ if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+ rtlpriv->psc.pwrdomain_protect = false;
+ return;
+ }
+ }
+
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+
+ /* Reset MAC-IO and CPU and Core Digital BIT10/11/15 */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+
+ /* If IPS we need to turn LED on. So we not
+ * not disable BIT 3/7 of reg3. */
+ if (rtlpriv->psc.rfoff_reason & (RF_CHANGE_BY_IPS | RF_CHANGE_BY_HW))
+ tmpu1b &= 0xFB;
+ else
+ tmpu1b &= 0x73;
+
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+ /* wait for BIT 10/11/15 to pull high automatically!! */
+ mdelay(1);
+
+ rtl_write_byte(rtlpriv, SPS0_CTRL + 1, 0x53);
+ rtl_write_byte(rtlpriv, SPS0_CTRL + 0, 0x57);
+
+ rtl_write_byte(rtlpriv, CMDR, 0);
+ rtl_write_byte(rtlpriv, TCR, 0);
+
+ /* Enable AFE clock source */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+ /* Delay 1.5ms */
+ mdelay(2);
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+ /* Enable AFE Macro Block's Bandgap */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | AFE_BGEN));
+ mdelay(1);
+
+ /* Enable AFE Mbias */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | AFE_MBEN |
+ AFE_MISC_I32_EN));
+ mdelay(1);
+
+ /* Enable LDOA15 block */
+ tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | LDA15_EN));
+
+ /* Enable LDOV12D block */
+ tmpu1b = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+ rtl_write_byte(rtlpriv, LDOV12D_CTRL, (tmpu1b | LDV12_EN));
+
+ /* Set Digital Vdd to Retention isolation Path. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
+ rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | ISO_PWC_DV2RP));
+
+ /* For warm reboot NIC disappera bug. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+ /* Support 64k IMEM */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1);
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, (tmpu1b & 0x68));
+
+ /* Enable AFE PLL Macro Block */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+ /* Enable MAC 80MHZ clock */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Release isolation AFE PLL & MD */
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6);
+
+ /* Enable MAC clock */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+ /* Enable Core digital and enable IOREG R/W */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11)));
+ /* enable REG_EN */
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+ /* Switch the control path. */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
+
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
+ if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+ rtlpriv->psc.pwrdomain_protect = false;
+ return;
+ }
+
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+ /* After MACIO reset,we must refresh LED state. */
+ _rtl92su_gen_refreshledstate(hw);
+
+ rtlpriv->psc.pwrdomain_protect = false;
+}
+
+void rtl92su_card_disable(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ enum nl80211_iftype opmode;
+ u8 wait = 30;
+
+ /* we should chnge GPIO to input mode
+ * this will drop away current about 25mA*/
+ rtl8192su_gpiobit3_cfg_inputmode(hw);
+
+ /* this is very important for ips power save */
+ while (wait-- >= 10 && rtlpriv->psc.pwrdomain_protect) {
+ if (rtlpriv->psc.pwrdomain_protect)
+ mdelay(20);
+ else
+ break;
+ }
+
+ /* notify mac80211 to stop any work related to scanning */
+ //ieee80211_scan_completed(hw, true);
+
+ mac->link_state = MAC80211_NOLINK;
+ opmode = NL80211_IFTYPE_UNSPECIFIED;
+ _rtl92su_set_media_status(hw, opmode);
+
+ _rtl92s_phy_set_rfhalt(hw);
+ udelay(100);
+}
+
+void rtl92su_interrupt_recognized(struct ieee80211_hw *hw, u32 *p_inta,
+ u32 *p_intb)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+
+ *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlusb->irq_mask[0];
+ rtl_write_dword(rtlpriv, ISR, *p_inta);
+
+ *p_intb = rtl_read_dword(rtlpriv, ISR + 4) & rtlusb->irq_mask[1];
+ rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
+}
+
+void rtl92su_set_beacon_related_registers(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 bcntime_cfg = 0;
+ u16 bcn_cw = 6, bcn_ifs = 0xf;
+ u16 atim_window = 2;
+
+ /* ATIM Window (in unit of TU). */
+ rtl_write_word(rtlpriv, ATIMWND, atim_window);
+
+ /* Beacon interval (in unit of TU). */
+ rtl_write_word(rtlpriv, BCN_INTERVAL, mac->beacon_interval);
+
+ /* DrvErlyInt (in unit of TU). (Time to send
+ * interrupt to notify driver to change
+ * beacon content) */
+ rtl_write_word(rtlpriv, BCN_DRV_EARLY_INT, 10 << 4);
+
+ /* BcnDMATIM(in unit of us). Indicates the
+ * time before TBTT to perform beacon queue DMA */
+ rtl_write_word(rtlpriv, BCN_DMATIME, 256);
+
+ /* Force beacon frame transmission even
+ * after receiving beacon frame from
+ * other ad hoc STA */
+ rtl_write_byte(rtlpriv, BCN_ERR_THRESH, 100);
+
+ /* Beacon Time Configuration */
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ bcntime_cfg |= (bcn_cw << BCN_TCFG_CW_SHIFT);
+
+ /* TODO: bcn_ifs may required to be changed on ASIC */
+ bcntime_cfg |= bcn_ifs << BCN_TCFG_IFS;
+
+ /*for beacon changed */
+ rtl92s_phy_set_beacon_hwreg(hw, mac->beacon_interval);
+}
+
+void rtl92su_set_beacon_interval(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 bcn_interval = mac->beacon_interval;
+
+ /* Beacon interval (in unit of TU). */
+ rtl_write_word(rtlpriv, BCN_INTERVAL, bcn_interval);
+ /* 2008.10.24 added by tynli for beacon changed. */
+ rtl92s_phy_set_beacon_hwreg(hw, bcn_interval);
+}
+
+void rtl92su_update_interrupt_mask(struct ieee80211_hw *hw,
+ u32 add_msr, u32 rm_msr)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+
+ RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n",
+ add_msr, rm_msr);
+
+ if (add_msr)
+ rtlusb->irq_mask[0] |= add_msr;
+
+ if (rm_msr)
+ rtlusb->irq_mask[0] &= (~rm_msr);
+
+ rtl92su_disable_interrupt(hw);
+ rtl92su_enable_interrupt(hw);
+}
+
+static void _rtl8192se_get_IC_Inferiority(struct ieee80211_hw *hw)
+{
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u8 efuse_id;
+
+ rtlhal->ic_class = IC_INFERIORITY_A;
+
+ /* Only retrieving while using EFUSE. */
+ if ((rtlefuse->epromtype == EEPROM_BOOT_EFUSE) &&
+ !rtlefuse->autoload_failflag) {
+ efuse_id = efuse_read_1byte(hw, EFUSE_IC_ID_OFFSET);
+
+ if (efuse_id == 0xfe)
+ rtlhal->ic_class = IC_INFERIORITY_B;
+ }
+}
+
+static void _rtl92su_read_adapter_info(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u16 i, usvalue;
+ u16 eeprom_id;
+ u8 tempval;
+ u8 hwinfo[HWSET_MAX_SIZE_92S];
+ u8 rf_path, index;
+
+ if (rtlefuse->epromtype == EEPROM_93C46) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "RTL819X Not boot from eeprom, check it !!\n");
+ } else if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+ rtl_efuse_shadow_map_update(hw);
+
+ memcpy((void *)hwinfo, (void *)
+ &rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+ HWSET_MAX_SIZE_92S);
+ }
+
+ RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP",
+ hwinfo, HWSET_MAX_SIZE_92S);
+
+ eeprom_id = *((u16 *)&hwinfo[0]);
+ if (eeprom_id != RTL8190_EEPROM_ID) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ "EEPROM ID(%#x) is invalid!!\n", eeprom_id);
+ rtlefuse->autoload_failflag = true;
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
+ rtlefuse->autoload_failflag = false;
+ }
+
+ if (rtlefuse->autoload_failflag)
+ return;
+
+ _rtl8192se_get_IC_Inferiority(hw);
+
+ /* Read IC Version && Channel Plan */
+ /* VID, DID SE 0xA-D */
+ rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
+ rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
+// rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
+// rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
+ rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "EEPROMId = 0x%4x\n", eeprom_id);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did);
+// RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+// "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid);
+// RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+// "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
+
+ for (i = 0; i < 6; i += 2) {
+ usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
+ *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
+ }
+
+ for (i = 0; i < 6; i++)
+ rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr);
+
+ /* Get Tx Power Level by Channel */
+ /* Read Tx power of Channel 1 ~ 14 from EEPROM. */
+ /* 92S suupport RF A & B */
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ for (i = 0; i < 3; i++) {
+ /* Read CCK RF A & B Tx power */
+ rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][i] =
+ hwinfo[EEPROM_TXPOWERBASE + rf_path * 3 + i];
+
+ /* Read OFDM RF A & B Tx power for 1T */
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
+ hwinfo[EEPROM_TXPOWERBASE + 6 + rf_path * 3 + i];
+
+ /* Read OFDM RF A & B Tx power for 2T */
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path][i]
+ = hwinfo[EEPROM_TXPOWERBASE + 12 +
+ rf_path * 3 + i];
+ }
+ }
+
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ for (i = 0; i < 3; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+ "RF(%d) EEPROM CCK Area(%d) = 0x%x\n",
+ rf_path, i,
+ rtlefuse->eeprom_chnlarea_txpwr_cck
+ [rf_path][i]);
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ for (i = 0; i < 3; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+ "RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
+ rf_path, i,
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+ [rf_path][i]);
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ for (i = 0; i < 3; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+ "RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
+ rf_path, i,
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
+ [rf_path][i]);
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+
+ /* Assign dedicated channel tx power */
+ for (i = 0; i < 14; i++) {
+ /* channel 1~3 use the same Tx Power Level. */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 1;
+ /* Channel 9-14 */
+ else
+ index = 2;
+
+ /* Record A & B CCK /OFDM - 1T/2T Channel area
+ * tx power */
+ rtlefuse->txpwrlevel_cck[rf_path][i] =
+ rtlefuse->eeprom_chnlarea_txpwr_cck
+ [rf_path][index];
+ rtlefuse->txpwrlevel_ht40_1s[rf_path][i] =
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+ [rf_path][index];
+ rtlefuse->txpwrlevel_ht40_2s[rf_path][i] =
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
+ [rf_path][index];
+ }
+
+ for (i = 0; i < 14; i++) {
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n",
+ rf_path, i,
+ rtlefuse->txpwrlevel_cck[rf_path][i],
+ rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
+ rtlefuse->txpwrlevel_ht40_2s[rf_path][i]);
+ }
+ }
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ for (i = 0; i < 3; i++) {
+ /* Read Power diff limit. */
+ rtlefuse->eeprom_pwrgroup[rf_path][i] =
+ hwinfo[EEPROM_TXPWRGROUP + rf_path * 3 + i];
+ }
+ }
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ /* Fill Pwr group */
+ for (i = 0; i < 14; i++) {
+ /* Chanel 1-3 */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 1;
+ /* Channel 9-13 */
+ else
+ index = 2;
+
+ rtlefuse->pwrgroup_ht20[rf_path][i] =
+ (rtlefuse->eeprom_pwrgroup[rf_path][index] &
+ 0xf);
+ rtlefuse->pwrgroup_ht40[rf_path][i] =
+ ((rtlefuse->eeprom_pwrgroup[rf_path][index] &
+ 0xf0) >> 4);
+
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "RF-%d pwrgroup_ht20[%d] = 0x%x\n",
+ rf_path, i,
+ rtlefuse->pwrgroup_ht20[rf_path][i]);
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "RF-%d pwrgroup_ht40[%d] = 0x%x\n",
+ rf_path, i,
+ rtlefuse->pwrgroup_ht40[rf_path][i]);
+ }
+ }
+
+ for (i = 0; i < 14; i++) {
+ /* Read tx power difference between HT OFDM 20/40 MHZ */
+ /* channel 1-3 */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 1;
+ /* Channel 9-14 */
+ else
+ index = 2;
+
+ tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_HT20_DIFF +
+ index]) & 0xff;
+ rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF);
+ rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] =
+ ((tempval >> 4) & 0xF);
+
+ /* Read OFDM<->HT tx power diff */
+ /* Channel 1-3 */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 0x11;
+ /* Channel 9-14 */
+ else
+ index = 1;
+
+ tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_OFDM_DIFF + index])
+ & 0xff;
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] =
+ (tempval & 0xF);
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] =
+ ((tempval >> 4) & 0xF);
+
+// tempval = (*(u8 *)&hwinfo[TX_PWR_SAFETY_CHK]);
+// rtlefuse->txpwr_safetyflag = (tempval & 0x01);
+ }
+
+ rtlefuse->eeprom_regulatory = 0;
+ if (rtlefuse->eeprom_version >= 2) {
+ /* BIT(0)~2 */
+ if (rtlefuse->eeprom_version >= 4)
+ rtlefuse->eeprom_regulatory =
+ (hwinfo[EEPROM_REGULATORY] & 0x7);
+ else /* BIT(0) */
+ rtlefuse->eeprom_regulatory =
+ (hwinfo[EEPROM_REGULATORY] & 0x1);
+ }
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory);
+
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "RF-A Ht20 to HT40 Diff[%d] = 0x%x\n",
+ i, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]);
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "RF-A Legacy to Ht40 Diff[%d] = 0x%x\n",
+ i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]);
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "RF-B Ht20 to HT40 Diff[%d] = 0x%x\n",
+ i, rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]);
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "RF-B Legacy to HT40 Diff[%d] = 0x%x\n",
+ i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]);
+
+// RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+// "TxPwrSafetyFlag = %d\n", rtlefuse->txpwr_safetyflag);
+
+ /* Read RF-indication and Tx Power gain
+ * index diff of legacy to HT OFDM rate. */
+ tempval = (*(u8 *)&hwinfo[EEPROM_RFIND_POWERDIFF]) & 0xff;
+ rtlefuse->eeprom_txpowerdiff = tempval;
+ rtlefuse->legacy_httxpowerdiff =
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0];
+
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "TxPowerDiff = %#x\n", rtlefuse->eeprom_txpowerdiff);
+
+ /* Get TSSI value for each path. */
+ usvalue = *(u16 *)&hwinfo[EEPROM_TSSI_A];
+ rtlefuse->eeprom_tssi[RF90_PATH_A] = (u8)((usvalue & 0xff00) >> 8);
+ usvalue = *(u8 *)&hwinfo[EEPROM_TSSI_B];
+ rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff);
+
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower, "TSSI_A = 0x%x, TSSI_B = 0x%x\n",
+ rtlefuse->eeprom_tssi[RF90_PATH_A],
+ rtlefuse->eeprom_tssi[RF90_PATH_B]);
+
+ /* Read antenna tx power offset of B/C/D to A from EEPROM */
+ /* and read ThermalMeter from EEPROM */
+ tempval = *(u8 *)&hwinfo[EEPROM_THERMALMETER];
+ rtlefuse->eeprom_thermalmeter = tempval;
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter);
+
+ /* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */
+ rtlefuse->thermalmeter[0] = (rtlefuse->eeprom_thermalmeter & 0x1f);
+ rtlefuse->tssi_13dbm = rtlefuse->eeprom_thermalmeter * 100;
+
+ /* Read CrystalCap from EEPROM */
+ tempval = (*(u8 *)&hwinfo[EEPROM_CRYSTALCAP]) >> 4;
+ rtlefuse->eeprom_crystalcap = tempval;
+ /* CrystalCap, BIT(12)~15 */
+ rtlefuse->crystalcap = rtlefuse->eeprom_crystalcap;
+
+ /* Read IC Version && Channel Plan */
+ /* Version ID, Channel plan */
+ rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
+ rtlefuse->txpwr_fromeprom = true;
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ "EEPROM ChannelPlan = 0x%4x\n", rtlefuse->eeprom_channelplan);
+
+ /* Read Customer ID or Board Type!!! */
+ //tempval = *(u8 *)&hwinfo[EEPROM_BOARDTYPE];
+ /* Change RF type definition */
+/*
+ if (tempval == 0)
+ rtlphy->rf_type = RF_2T2R;
+ else if (tempval == 1)
+ rtlphy->rf_type = RF_1T2R;
+ else if (tempval == 2)
+ rtlphy->rf_type = RF_1T2R;
+ else if (tempval == 3)
+ rtlphy->rf_type = RF_1T1R;
+*/
+ // XXX
+ rtlphy->rf_type = RF_1T2R;
+
+ /* 1T2R but 1SS (1x1 receive combining) */
+ rtlefuse->b1x1_recvcombine = false;
+ if (rtlphy->rf_type == RF_1T2R) {
+ tempval = rtl_read_byte(rtlpriv, 0x07);
+ if (!(tempval & BIT(0))) {
+ rtlefuse->b1x1_recvcombine = true;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "RF_TYPE=1T2R but only 1SS\n");
+ }
+ }
+ rtlefuse->b1ss_support = rtlefuse->b1x1_recvcombine;
+ rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMID];
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM Customer ID: 0x%2x",
+ rtlefuse->eeprom_oemid);
+
+ /* set channel paln to world wide 13 */
+ rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
+}
+
+void rtl92su_read_eeprom_info(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 tmp_u1b = 0;
+
+ tmp_u1b = rtl_read_byte(rtlpriv, EPROM_CMD);
+
+ if (tmp_u1b & BIT(4)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n");
+ rtlefuse->epromtype = EEPROM_93C46;
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n");
+ rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
+ }
+
+ if (tmp_u1b & BIT(5)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
+ rtlefuse->autoload_failflag = false;
+ _rtl92su_read_adapter_info(hw);
+ } else {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ rtlefuse->autoload_failflag = true;
+ }
+}
+
+static void rtl92su_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u32 ratr_value;
+ u8 ratr_index = 0;
+ u8 nmode = mac->ht_enable;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+ u16 shortgi_rate = 0;
+ u32 tmp_ratr_value = 0;
+ u8 curtxbw_40mhz = mac->bw_40;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = mac->mode;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_value = sta->supp_rates[1] << 4;
+ else
+ ratr_value = sta->supp_rates[0];
+ ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
+ switch (wirelessmode) {
+ case WIRELESS_MODE_B:
+ ratr_value &= 0x0000000D;
+ break;
+ case WIRELESS_MODE_G:
+ ratr_value &= 0x00000FF5;
+ break;
+ case WIRELESS_MODE_N_24G:
+ case WIRELESS_MODE_N_5G:
+ nmode = 1;
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
+ ratr_value &= 0x0007F005;
+ } else {
+ u32 ratr_mask;
+
+ if (get_rf_type(rtlphy) == RF_1T2R ||
+ get_rf_type(rtlphy) == RF_1T1R) {
+ if (curtxbw_40mhz)
+ ratr_mask = 0x000ff015;
+ else
+ ratr_mask = 0x000ff005;
+ } else {
+ if (curtxbw_40mhz)
+ ratr_mask = 0x0f0ff015;
+ else
+ ratr_mask = 0x0f0ff005;
+ }
+
+ ratr_value &= ratr_mask;
+ }
+ break;
+ default:
+ if (rtlphy->rf_type == RF_1T2R)
+ ratr_value &= 0x000ff0ff;
+ else
+ ratr_value &= 0x0f0ff0ff;
+
+ break;
+ }
+
+ if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+ ratr_value &= 0x0FFFFFFF;
+ else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+ ratr_value &= 0x0FFFFFF0;
+
+ if (nmode && ((curtxbw_40mhz &&
+ curshortgi_40mhz) || (!curtxbw_40mhz &&
+ curshortgi_20mhz))) {
+
+ ratr_value |= 0x10000000;
+ tmp_ratr_value = (ratr_value >> 12);
+
+ for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+ if ((1 << shortgi_rate) & tmp_ratr_value)
+ break;
+ }
+
+ shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+ (shortgi_rate << 4) | (shortgi_rate);
+
+ rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+ }
+
+ rtl_write_dword(rtlpriv, ARFR0 + ratr_index * 4, ratr_value);
+ if (ratr_value & 0xfffff000)
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_N);
+ else
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_BG);
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
+ rtl_read_dword(rtlpriv, ARFR0));
+}
+
+static void rtl92su_update_hal_rate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
+ u32 ratr_bitmap;
+ u8 ratr_index = 0;
+ u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
+ ? 1 : 0;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = 0;
+ bool shortgi = false;
+ u32 ratr_value = 0;
+ u8 shortgi_rate = 0;
+ u32 mask = 0;
+ u32 band = 0;
+ bool bmulticast = false;
+ u8 macid = 0;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ wirelessmode = sta_entry->wireless_mode;
+ if (mac->opmode == NL80211_IFTYPE_STATION)
+ curtxbw_40mhz = mac->bw_40;
+ else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ macid = sta->aid + 1;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_bitmap = sta->supp_rates[1] << 4;
+ else
+ ratr_bitmap = sta->supp_rates[0];
+ ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
+ switch (wirelessmode) {
+ case WIRELESS_MODE_B:
+ band |= WIRELESS_11B;
+ ratr_index = RATR_INX_WIRELESS_B;
+ if (ratr_bitmap & 0x0000000c)
+ ratr_bitmap &= 0x0000000d;
+ else
+ ratr_bitmap &= 0x0000000f;
+ break;
+ case WIRELESS_MODE_G:
+ band |= (WIRELESS_11G | WIRELESS_11B);
+ ratr_index = RATR_INX_WIRELESS_GB;
+
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x00000f00;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x00000ff0;
+ else
+ ratr_bitmap &= 0x00000ff5;
+ break;
+ case WIRELESS_MODE_A:
+ band |= WIRELESS_11A;
+ ratr_index = RATR_INX_WIRELESS_A;
+ ratr_bitmap &= 0x00000ff0;
+ break;
+ case WIRELESS_MODE_N_24G:
+ case WIRELESS_MODE_N_5G:
+ band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+ ratr_index = RATR_INX_WIRELESS_NGB;
+
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x00070000;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x0007f000;
+ else
+ ratr_bitmap &= 0x0007f005;
+ } else {
+ if (rtlphy->rf_type == RF_1T2R ||
+ rtlphy->rf_type == RF_1T1R) {
+ if (rssi_level == 1) {
+ ratr_bitmap &= 0x000f0000;
+ } else if (rssi_level == 3) {
+ ratr_bitmap &= 0x000fc000;
+ } else if (rssi_level == 5) {
+ ratr_bitmap &= 0x000ff000;
+ } else {
+ if (curtxbw_40mhz)
+ ratr_bitmap &= 0x000ff015;
+ else
+ ratr_bitmap &= 0x000ff005;
+ }
+ } else {
+ if (rssi_level == 1) {
+ ratr_bitmap &= 0x0f8f0000;
+ } else if (rssi_level == 3) {
+ ratr_bitmap &= 0x0f8fc000;
+ } else if (rssi_level == 5) {
+ ratr_bitmap &= 0x0f8ff000;
+ } else {
+ if (curtxbw_40mhz)
+ ratr_bitmap &= 0x0f8ff015;
+ else
+ ratr_bitmap &= 0x0f8ff005;
+ }
+ }
+ }
+
+ if ((curtxbw_40mhz && curshortgi_40mhz) ||
+ (!curtxbw_40mhz && curshortgi_20mhz)) {
+ if (macid == 0)
+ shortgi = true;
+ else if (macid == 1)
+ shortgi = false;
+ }
+ break;
+ default:
+ band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+ ratr_index = RATR_INX_WIRELESS_NGB;
+
+ if (rtlphy->rf_type == RF_1T2R)
+ ratr_bitmap &= 0x000ff0ff;
+ else
+ ratr_bitmap &= 0x0f8ff0ff;
+ break;
+ }
+
+ if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+ ratr_bitmap &= 0x0FFFFFFF;
+ else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+ ratr_bitmap &= 0x0FFFFFF0;
+
+ if (shortgi) {
+ ratr_bitmap |= 0x10000000;
+ /* Get MAX MCS available. */
+ ratr_value = (ratr_bitmap >> 12);
+ for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+ if ((1 << shortgi_rate) & ratr_value)
+ break;
+ }
+
+ shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+ (shortgi_rate << 4) | (shortgi_rate);
+ rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+ }
+
+ mask |= (bmulticast ? 1 : 0) << 9 | (macid & 0x1f) << 4 | (band & 0xf);
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, "mask = %x, bitmap = %x\n",
+ mask, ratr_bitmap);
+ rtl_write_dword(rtlpriv, 0x2c4, ratr_bitmap);
+ rtl_write_dword(rtlpriv, WFM5, (FW_RA_UPDATE_MASK | (mask << 8)));
+
+ if (macid != 0)
+ sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92su_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->dm.useramask)
+ rtl92su_update_hal_rate_mask(hw, sta, rssi_level);
+ else
+ rtl92su_update_hal_rate_table(hw, sta);
+}
+
+void rtl92su_update_channel_access_setting(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 sifs_timer;
+
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
+ (u8 *)&mac->slot_time);
+ sifs_timer = 0x0e0e;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
+
+}
+
+/* this ifunction is for RFKILL, it's different with windows,
+ * because UI will disable wireless when GPIO Radio Off.
+ * And here we not check or Disable/Enable ASPM like windows*/
+bool rtl92su_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ enum rf_pwrstate rfpwr_toset /*, cur_rfstate */;
+ unsigned long flag = 0;
+ bool actuallyset = false;
+ bool turnonbypowerdomain = false;
+
+ if (ppsc->swrf_processing)
+ return false;
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ if (ppsc->rfchange_inprogress) {
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ return false;
+ } else {
+ ppsc->rfchange_inprogress = true;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ }
+
+ /* cur_rfstate = ppsc->rfpwr_state;*/
+
+ /* because after _rtl92s_phy_set_rfhalt, all power
+ * closed, so we must open some power for GPIO check,
+ * or we will always check GPIO RFOFF here,
+ * And we should close power after GPIO check */
+ if (RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+ _rtl92su_power_domain_init(hw);
+ turnonbypowerdomain = true;
+ }
+
+ rfpwr_toset = _rtl92su_rf_onoff_detect(hw);
+
+ if ((ppsc->hwradiooff) && (rfpwr_toset == ERFON)) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ "RFKILL-HW Radio ON, RF ON\n");
+
+ rfpwr_toset = ERFON;
+ ppsc->hwradiooff = false;
+ actuallyset = true;
+ } else if ((!ppsc->hwradiooff) && (rfpwr_toset == ERFOFF)) {
+ RT_TRACE(rtlpriv, COMP_RF,
+ DBG_DMESG, "RFKILL-HW Radio OFF, RF OFF\n");
+
+ rfpwr_toset = ERFOFF;
+ ppsc->hwradiooff = true;
+ actuallyset = true;
+ }
+
+ if (actuallyset) {
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ ppsc->rfchange_inprogress = false;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+
+ /* this not include ifconfig wlan0 down case */
+ /* } else if (rfpwr_toset == ERFOFF || cur_rfstate == ERFOFF) { */
+ } else {
+ /* because power_domain_init may be happen when
+ * _rtl92s_phy_set_rfhalt, this will open some powers
+ * and cause current increasing about 40 mA for ips,
+ * rfoff and ifconfig down, so we set
+ * _rtl92s_phy_set_rfhalt again here */
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC &&
+ turnonbypowerdomain) {
+ _rtl92s_phy_set_rfhalt(hw);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+ }
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ ppsc->rfchange_inprogress = false;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ }
+
+ *valid = 1;
+ return !ppsc->hwradiooff;
+
+}
+
+/* Is_wepkey just used for WEP used as group & pairwise key
+ * if pairwise is AES ang group is WEP Is_wepkey == false.*/
+void rtl92su_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
+ bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 *macaddr = p_macaddr;
+
+ u32 entry_id = 0;
+ bool is_pairwise = false;
+
+ static u8 cam_const_addr[4][6] = {
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+ };
+ static u8 cam_const_broad[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+ };
+
+ if (clear_all) {
+ u8 idx = 0;
+ u8 cam_offset = 0;
+ u8 clear_number = 5;
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n");
+
+ for (idx = 0; idx < clear_number; idx++) {
+ rtl_cam_mark_invalid(hw, cam_offset + idx);
+ rtl_cam_empty_entry(hw, cam_offset + idx);
+
+ if (idx < 5) {
+ memset(rtlpriv->sec.key_buf[idx], 0,
+ MAX_KEY_LEN);
+ rtlpriv->sec.key_len[idx] = 0;
+ }
+ }
+
+ } else {
+ switch (enc_algo) {
+ case WEP40_ENCRYPTION:
+ enc_algo = CAM_WEP40;
+ break;
+ case WEP104_ENCRYPTION:
+ enc_algo = CAM_WEP104;
+ break;
+ case TKIP_ENCRYPTION:
+ enc_algo = CAM_TKIP;
+ break;
+ case AESCCMP_ENCRYPTION:
+ enc_algo = CAM_AES;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ enc_algo = CAM_TKIP;
+ break;
+ }
+
+ if (is_wepkey || rtlpriv->sec.use_defaultkey) {
+ macaddr = cam_const_addr[key_index];
+ entry_id = key_index;
+ } else {
+ if (is_group) {
+ macaddr = cam_const_broad;
+ entry_id = key_index;
+ } else {
+ if (mac->opmode == NL80211_IFTYPE_AP) {
+ entry_id = rtl_cam_get_free_entry(hw,
+ p_macaddr);
+ if (entry_id >= TOTAL_CAM_ENTRY) {
+ RT_TRACE(rtlpriv,
+ COMP_SEC, DBG_EMERG,
+ "Can not find free hw security cam entry\n");
+ return;
+ }
+ } else {
+ entry_id = CAM_PAIRWISE_KEY_POSITION;
+ }
+
+ key_index = PAIRWISE_KEYIDX;
+ is_pairwise = true;
+ }
+ }
+
+ if (rtlpriv->sec.key_len[key_index] == 0) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "delete one entry, entry_id is %d\n",
+ entry_id);
+ if (mac->opmode == NL80211_IFTYPE_AP)
+ rtl_cam_del_entry(hw, p_macaddr);
+ rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
+ } else {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ "The insert KEY length is %d\n",
+ rtlpriv->sec.key_len[PAIRWISE_KEYIDX]);
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ "The insert KEY is %x %x\n",
+ rtlpriv->sec.key_buf[0][0],
+ rtlpriv->sec.key_buf[0][1]);
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "add one entry\n");
+ if (is_pairwise) {
+ RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
+ "Pairwise Key content",
+ rtlpriv->sec.pairwise_key,
+ rtlpriv->sec.
+ key_len[PAIRWISE_KEYIDX]);
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "set Pairwise key\n");
+
+ rtl_cam_add_one_entry(hw, macaddr, key_index,
+ entry_id, enc_algo,
+ CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[key_index]);
+ } else {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "set group key\n");
+
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ rtl_cam_add_one_entry(hw,
+ rtlefuse->dev_addr,
+ PAIRWISE_KEYIDX,
+ CAM_PAIRWISE_KEY_POSITION,
+ enc_algo, CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[entry_id]);
+ }
+
+ rtl_cam_add_one_entry(hw, macaddr, key_index,
+ entry_id, enc_algo,
+ CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[entry_id]);
+ }
+
+ }
+ }
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/hw.h b/drivers/net/wireless/rtlwifi/rtl8192su/hw.h
new file mode 100644
index 0000000..3a8e73c
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/hw.h
@@ -0,0 +1,79 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_HW_H__
+#define __REALTEK_PCI92SE_HW_H__
+
+#define MSR_LINK_MANAGED 2
+#define MSR_LINK_NONE 0
+#define MSR_LINK_SHIFT 0
+#define MSR_LINK_ADHOC 1
+#define MSR_LINK_MASTER 3
+
+enum WIRELESS_NETWORK_TYPE {
+ WIRELESS_11B = 1,
+ WIRELESS_11G = 2,
+ WIRELESS_11A = 4,
+ WIRELESS_11N = 8
+};
+
+void rtl92su_get_hw_reg(struct ieee80211_hw *hw,
+ u8 variable, u8 *val);
+void rtl92su_read_chip_version(struct ieee80211_hw *hw);
+void rtl92su_read_eeprom_info(struct ieee80211_hw *hw);
+void rtl92su_interrupt_recognized(struct ieee80211_hw *hw,
+ u32 *inta, u32 *intb);
+int rtl92su_hw_init(struct ieee80211_hw *hw);
+void rtl92su_card_disable(struct ieee80211_hw *hw);
+void rtl92su_enable_interrupt(struct ieee80211_hw *hw);
+void rtl92su_disable_interrupt(struct ieee80211_hw *hw);
+int rtl92su_set_network_type(struct ieee80211_hw *hw,
+ enum nl80211_iftype type);
+void rtl92su_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
+void rtl92su_set_mac_addr(struct rtl_io *io, const u8 * addr);
+void rtl92su_set_qos(struct ieee80211_hw *hw, int aci);
+void rtl92su_set_beacon_related_registers(struct ieee80211_hw *hw);
+void rtl92su_set_beacon_interval(struct ieee80211_hw *hw);
+void rtl92su_update_interrupt_mask(struct ieee80211_hw *hw,
+ u32 add_msr, u32 rm_msr);
+void rtl92su_set_hw_reg(struct ieee80211_hw *hw, u8 variable,
+ u8 *val);
+void rtl92su_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level);
+void rtl92su_update_channel_access_setting(struct ieee80211_hw *hw);
+bool rtl92su_gpio_radio_on_off_checking(struct ieee80211_hw *hw,
+ u8 *valid);
+void rtl8192su_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw);
+void rtl92su_enable_hw_security_config(struct ieee80211_hw *hw);
+void rtl92su_set_key(struct ieee80211_hw *hw,
+ u32 key_index, u8 *macaddr, bool is_group,
+ u8 enc_algo, bool is_wepkey, bool clear_all);
+void rtl92su_suspend(struct ieee80211_hw *hw);
+void rtl92su_resume(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/led.c b/drivers/net/wireless/rtlwifi/rtl8192su/led.c
new file mode 100644
index 0000000..134b1d1
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/led.c
@@ -0,0 +1,154 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../usb.h"
+#include "reg.h"
+#include "led.h"
+
+static void _rtl92su_init_led(struct ieee80211_hw *hw,
+ struct rtl_led *pled, enum rtl_led_pin ledpin)
+{
+ pled->hw = hw;
+ pled->ledpin = ledpin;
+ pled->ledon = false;
+}
+
+void rtl92su_init_sw_leds(struct ieee80211_hw *hw)
+{
+ struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
+ _rtl92su_init_led(hw, &(usbpriv->ledctl.sw_led0), LED_PIN_LED0);
+ _rtl92su_init_led(hw, &(usbpriv->ledctl.sw_led1), LED_PIN_LED1);
+}
+
+void rtl92su_deinit_sw_leds(struct ieee80211_hw *hw)
+{
+}
+
+void rtl92su_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+ u8 ledcfg;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
+ LEDCFG, pled->ledpin);
+
+ ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
+
+ switch (pled->ledpin) {
+ case LED_PIN_GPIO0:
+ break;
+ case LED_PIN_LED0:
+ rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0xf0);
+ break;
+ case LED_PIN_LED1:
+ rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0x0f);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ break;
+ }
+ pled->ledon = true;
+}
+
+void rtl92su_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+ struct rtl_priv *rtlpriv;
+ struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
+ u8 ledcfg;
+
+ rtlpriv = rtl_priv(hw);
+ if (!rtlpriv || rtlpriv->max_fw_size)
+ return;
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
+ LEDCFG, pled->ledpin);
+
+ ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
+
+ switch (pled->ledpin) {
+ case LED_PIN_GPIO0:
+ break;
+ case LED_PIN_LED0:
+ ledcfg &= 0xf0;
+ if (usbpriv->ledctl.led_opendrain)
+ rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(1)));
+ else
+ rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
+ break;
+ case LED_PIN_LED1:
+ ledcfg &= 0x0f;
+ rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ break;
+ }
+ pled->ledon = false;
+}
+
+static void _rtl92su_sw_led_control(struct ieee80211_hw *hw,
+ enum led_ctl_mode ledaction)
+{
+ struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
+ struct rtl_led *pLed0 = &(usbpriv->ledctl.sw_led0);
+ switch (ledaction) {
+ case LED_CTL_POWER_ON:
+ case LED_CTL_LINK:
+ case LED_CTL_NO_LINK:
+ rtl92su_sw_led_on(hw, pLed0);
+ break;
+ case LED_CTL_POWER_OFF:
+ rtl92su_sw_led_off(hw, pLed0);
+ break;
+ default:
+ break;
+ }
+}
+
+void rtl92su_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
+ (ledaction == LED_CTL_TX ||
+ ledaction == LED_CTL_RX ||
+ ledaction == LED_CTL_SITE_SURVEY ||
+ ledaction == LED_CTL_LINK ||
+ ledaction == LED_CTL_NO_LINK ||
+ ledaction == LED_CTL_START_TO_LINK ||
+ ledaction == LED_CTL_POWER_ON)) {
+ return;
+ }
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "ledaction %d\n", ledaction);
+
+ _rtl92su_sw_led_control(hw, ledaction);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/led.h b/drivers/net/wireless/rtlwifi/rtl8192su/led.h
new file mode 100644
index 0000000..2ed8772
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/led.h
@@ -0,0 +1,38 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_LED_H__
+#define __REALTEK_PCI92SE_LED_H__
+
+void rtl92su_init_sw_leds(struct ieee80211_hw *hw);
+void rtl92su_deinit_sw_leds(struct ieee80211_hw *hw);
+void rtl92su_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled);
+void rtl92su_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled);
+void rtl92su_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/phy.c b/drivers/net/wireless/rtlwifi/rtl8192su/phy.c
new file mode 100644
index 0000000..946bfe7
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/phy.c
@@ -0,0 +1,1751 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../ps.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+#include "fw.h"
+#include "hw.h"
+#include "table.h"
+
+static u32 _rtl92s_phy_calculate_bit_shift(u32 bitmask)
+{
+ u32 i;
+
+ for (i = 0; i <= 31; i++) {
+ if (((bitmask >> i) & 0x1) == 1)
+ break;
+ }
+
+ return i;
+}
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 returnvalue = 0, originalvalue, bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, "regaddr(%#x), bitmask(%#x)\n",
+ regaddr, bitmask);
+
+ originalvalue = rtl92s_fw_iocmd_read(hw,
+ IOCMD_CLASS_BB_RF,
+ (regaddr & 0x0fff),
+ IOCMD_BB_READ_IDX);
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ returnvalue = (originalvalue & bitmask) >> bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, "BBR MASK=0x%x Addr[0x%x]=0x%x\n",
+ bitmask, regaddr, originalvalue);
+
+ return returnvalue;
+
+}
+
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+ u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 originalvalue, bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+ "regaddr(%#x), bitmask(%#x), data(%#x)\n",
+ regaddr, bitmask, data);
+
+ if (bitmask != MASKDWORD) {
+ originalvalue = rtl92s_fw_iocmd_read(hw,
+ IOCMD_CLASS_BB_RF,
+ (regaddr & 0x0fff),
+ IOCMD_BB_READ_IDX);
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ data = ((originalvalue & (~bitmask)) | (data << bitshift));
+ }
+
+ rtl92s_fw_iocmd_write(hw,
+ IOCMD_CLASS_BB_RF,
+ (regaddr & 0x0fff),
+ IOCMD_BB_WRITE_IDX,
+ data);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+ "regaddr(%#x), bitmask(%#x), data(%#x)\n",
+ regaddr, bitmask, data);
+
+}
+
+#if 0
+static u32 _rtl92s_phy_rf_serial_read(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset)
+{
+
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+ u32 newoffset;
+ u32 tmplong, tmplong2;
+ u8 rfpi_enable = 0;
+ u32 retvalue = 0;
+
+ offset &= 0x3f;
+ newoffset = offset;
+
+ tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
+
+ if (rfpath == RF90_PATH_A)
+ tmplong2 = tmplong;
+ else
+ tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD);
+
+ tmplong2 = (tmplong2 & (~BLSSI_READADDRESS)) | (newoffset << 23) |
+ BLSSI_READEDGE;
+
+ rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
+ tmplong & (~BLSSI_READEDGE));
+
+ mdelay(1);
+
+ rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2);
+ mdelay(1);
+
+ rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD, tmplong |
+ BLSSI_READEDGE);
+ mdelay(1);
+
+ if (rfpath == RF90_PATH_A)
+ rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1,
+ BIT(8));
+ else if (rfpath == RF90_PATH_B)
+ rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1,
+ BIT(8));
+
+ if (rfpi_enable)
+ retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readbackpi,
+ BLSSI_READBACK_DATA);
+ else
+ retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+ BLSSI_READBACK_DATA);
+
+ retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+ BLSSI_READBACK_DATA);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, "RFR-%d Addr[0x%x]=0x%x\n",
+ rfpath, pphyreg->rflssi_readback, retvalue);
+
+ return retvalue;
+
+}
+
+static void _rtl92s_phy_rf_serial_write(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset,
+ u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+ u32 data_and_addr = 0;
+ u32 newoffset;
+
+ offset &= 0x3f;
+ newoffset = offset;
+
+ data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
+ rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, "RFW-%d Addr[0x%x]=0x%x\n",
+ rfpath, pphyreg->rf3wire_offset, data_and_addr);
+}
+#endif
+
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 original_value, readback_value, bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+ "regaddr(%#x), rfpath(%#x), bitmask(%#x)\n",
+ regaddr, rfpath, bitmask);
+
+ spin_lock(&rtlpriv->locks.rf_lock);
+
+ original_value = rtl92s_fw_iocmd_read(hw,
+ IOCMD_CLASS_BB_RF,
+ (rfpath << 8) | (regaddr & 0xff),
+ IOCMD_RF_READ_IDX);
+
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ readback_value = (original_value & bitmask) >> bitshift;
+
+ spin_unlock(&rtlpriv->locks.rf_lock);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+ "regaddr(%#x), rfpath(%#x), bitmask(%#x), original_value(%#x)\n",
+ regaddr, rfpath, bitmask, original_value);
+
+ return readback_value;
+}
+
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 original_value, bitshift;
+
+ if (!((rtlphy->rf_pathmap >> rfpath) & 0x1))
+ return;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+ "regaddr(%#x), bitmask(%#x), data(%#x), rfpath(%#x)\n",
+ regaddr, bitmask, data, rfpath);
+
+ spin_lock(&rtlpriv->locks.rf_lock);
+
+ if (bitmask != RFREG_OFFSET_MASK) {
+ original_value = rtl92s_fw_iocmd_read(hw,
+ IOCMD_CLASS_BB_RF,
+ (rfpath << 8) | (regaddr & 0xff),
+ IOCMD_RF_READ_IDX);
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ data = ((original_value & (~bitmask)) | (data << bitshift));
+ }
+
+ rtl92s_fw_iocmd_write(hw,
+ IOCMD_CLASS_BB_RF,
+ (rfpath << 8) | (regaddr & 0xff),
+ IOCMD_RF_WRITE_IDX,
+ data);
+
+ spin_unlock(&rtlpriv->locks.rf_lock);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+ "regaddr(%#x), bitmask(%#x), data(%#x), rfpath(%#x)\n",
+ regaddr, bitmask, data, rfpath);
+
+}
+
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
+ u8 operation)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+ if (!is_hal_stop(rtlhal)) {
+ switch (operation) {
+ case SCAN_OPT_BACKUP:
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_PAUSE_DM_BY_SCAN);
+ break;
+ case SCAN_OPT_RESTORE:
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Unknown operation\n");
+ break;
+ }
+ }
+}
+
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+ enum nl80211_channel_type ch_type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u8 reg_bw_opmode;
+
+ // XXX
+ return;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, "Switch to %s bandwidth\n",
+ rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
+ "20MHz" : "40MHz");
+
+ if (rtlphy->set_bwmode_inprogress)
+ return;
+ if (is_hal_stop(rtlhal))
+ return;
+
+ rtlphy->set_bwmode_inprogress = true;
+
+ reg_bw_opmode = rtl_read_byte(rtlpriv, BW_OPMODE);
+ /* dummy read */
+ rtl_read_byte(rtlpriv, RRSR + 2);
+
+ switch (rtlphy->current_chan_bw) {
+ case HT_CHANNEL_WIDTH_20:
+ reg_bw_opmode |= BW_OPMODE_20MHZ;
+ rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ reg_bw_opmode &= ~BW_OPMODE_20MHZ;
+ rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ break;
+ }
+
+ switch (rtlphy->current_chan_bw) {
+ case HT_CHANNEL_WIDTH_20:
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
+ rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
+
+ if (rtlhal->version >= VERSION_8192S_BCUT)
+ rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x58);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
+ rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
+
+ rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
+ (mac->cur_40_prime_sc >> 1));
+ rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
+
+ if (rtlhal->version >= VERSION_8192S_BCUT)
+ rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ break;
+ }
+
+ rtl92s_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
+ rtlphy->set_bwmode_inprogress = false;
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, "<==\n");
+}
+
+static bool _rtl92s_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+ u32 cmdtableidx, u32 cmdtablesz, enum swchnlcmd_id cmdid,
+ u32 para1, u32 para2, u32 msdelay)
+{
+ struct swchnlcmd *pcmd;
+
+ if (cmdtable == NULL) {
+ RT_ASSERT(false, "cmdtable cannot be NULL\n");
+ return false;
+ }
+
+ if (cmdtableidx >= cmdtablesz)
+ return false;
+
+ pcmd = cmdtable + cmdtableidx;
+ pcmd->cmdid = cmdid;
+ pcmd->para1 = para1;
+ pcmd->para2 = para2;
+ pcmd->msdelay = msdelay;
+
+ return true;
+}
+
+static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
+ u8 channel, u8 *stage, u8 *step, u32 *delay)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct swchnlcmd precommoncmd[MAX_PRECMD_CNT];
+ u32 precommoncmdcnt;
+ struct swchnlcmd postcommoncmd[MAX_POSTCMD_CNT];
+ u32 postcommoncmdcnt;
+ struct swchnlcmd rfdependcmd[MAX_RFDEPENDCMD_CNT];
+ u32 rfdependcmdcnt;
+ struct swchnlcmd *currentcmd = NULL;
+ u8 rfpath;
+ u8 num_total_rfpath = rtlphy->num_total_rfpath;
+
+ precommoncmdcnt = 0;
+ _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+ MAX_PRECMD_CNT, CMDID_SET_TXPOWEROWER_LEVEL, 0, 0, 0);
+ _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+ MAX_PRECMD_CNT, CMDID_END, 0, 0, 0);
+
+ postcommoncmdcnt = 0;
+
+ _rtl92s_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++,
+ MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0);
+
+ rfdependcmdcnt = 0;
+
+ RT_ASSERT((channel >= 1 && channel <= 14),
+ "invalid channel for Zebra: %d\n", channel);
+
+ _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+ MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG,
+ RF_CHNLBW, channel, 10);
+
+ _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+ MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0, 0);
+
+ do {
+ switch (*stage) {
+ case 0:
+ currentcmd = &precommoncmd[*step];
+ break;
+ case 1:
+ currentcmd = &rfdependcmd[*step];
+ break;
+ case 2:
+ currentcmd = &postcommoncmd[*step];
+ break;
+ }
+
+ if (currentcmd->cmdid == CMDID_END) {
+ if ((*stage) == 2) {
+ return true;
+ } else {
+ (*stage)++;
+ (*step) = 0;
+ continue;
+ }
+ }
+
+ switch (currentcmd->cmdid) {
+ case CMDID_SET_TXPOWEROWER_LEVEL:
+ rtl92s_phy_set_txpower(hw, channel);
+ break;
+ case CMDID_WRITEPORT_ULONG:
+ rtl_write_dword(rtlpriv, currentcmd->para1,
+ currentcmd->para2);
+ break;
+ case CMDID_WRITEPORT_USHORT:
+ rtl_write_word(rtlpriv, currentcmd->para1,
+ (u16)currentcmd->para2);
+ break;
+ case CMDID_WRITEPORT_UCHAR:
+ rtl_write_byte(rtlpriv, currentcmd->para1,
+ (u8)currentcmd->para2);
+ break;
+ case CMDID_RF_WRITEREG:
+ for (rfpath = 0; rfpath < num_total_rfpath; rfpath++) {
+ rtlphy->rfreg_chnlval[rfpath] =
+ ((rtlphy->rfreg_chnlval[rfpath] &
+ 0xfffffc00) | currentcmd->para2);
+ rtl_set_rfreg(hw, (enum radio_path)rfpath,
+ currentcmd->para1,
+ RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[rfpath]);
+ }
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ break;
+ }
+
+ break;
+ } while (true);
+
+ (*delay) = currentcmd->msdelay;
+ (*step)++;
+ return false;
+}
+
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 delay;
+ bool ret;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, "switch to channel%d\n",
+ rtlphy->current_channel);
+
+ if (rtlphy->sw_chnl_inprogress)
+ return 0;
+
+ if (rtlphy->set_bwmode_inprogress)
+ return 0;
+
+ if (is_hal_stop(rtlhal))
+ return 0;
+
+ rtlphy->sw_chnl_inprogress = true;
+ rtlphy->sw_chnl_stage = 0;
+ rtlphy->sw_chnl_step = 0;
+
+ do {
+ if (!rtlphy->sw_chnl_inprogress)
+ break;
+
+ ret = _rtl92s_phy_sw_chnl_step_by_step(hw,
+ rtlphy->current_channel,
+ &rtlphy->sw_chnl_stage,
+ &rtlphy->sw_chnl_step, &delay);
+ if (!ret) {
+ if (delay > 0)
+ mdelay(delay);
+ else
+ continue;
+ } else {
+ rtlphy->sw_chnl_inprogress = false;
+ }
+ break;
+ } while (true);
+
+ rtlphy->sw_chnl_inprogress = false;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, "<==\n");
+
+ return 1;
+}
+
+static void _rtl92se_phy_set_rf_sleep(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1btmp;
+
+ // XXX
+ return;
+
+ u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+ u1btmp |= BIT(0);
+
+ rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+ rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+ rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+ udelay(100);
+
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
+ udelay(10);
+
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+ udelay(10);
+
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ udelay(10);
+
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+
+ /* we should chnge GPIO to input mode
+ * this will drop away current about 25mA*/
+ rtl8192su_gpiobit3_cfg_inputmode(hw);
+}
+
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate rfpwr_state)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ bool bresult = true;
+
+ if (rfpwr_state == ppsc->rfpwr_state)
+ return false;
+
+ switch (rfpwr_state) {
+ case ERFON:{
+ if ((ppsc->rfpwr_state == ERFOFF) &&
+ RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+
+ bool rtstatus;
+ u32 InitializeCount = 0;
+ do {
+ InitializeCount++;
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ "IPS Set eRf nic enable\n");
+ rtstatus = rtl_ps_enable_nic(hw);
+ } while (!rtstatus && (InitializeCount < 10));
+
+ RT_CLEAR_PS_LEVEL(ppsc,
+ RT_RF_OFF_LEVL_HALT_NIC);
+ } else {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ "awake, sleeped:%d ms state_inap:%x\n",
+ jiffies_to_msecs(jiffies -
+ ppsc->
+ last_sleep_jiffies),
+ rtlpriv->psc.state_inap);
+ ppsc->last_awake_jiffies = jiffies;
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+ rtl_write_byte(rtlpriv, TXPAUSE, 0x00);
+ rtl_write_byte(rtlpriv, PHY_CCA, 0x3);
+ }
+
+ if (mac->link_state == MAC80211_LINKED)
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_LINK);
+ else
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_NO_LINK);
+ break;
+ }
+ case ERFOFF:{
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ "IPS Set eRf nic disable\n");
+ rtl_ps_disable_nic(hw);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+ } else {
+ if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_NO_LINK);
+ else
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_POWER_OFF);
+ }
+ break;
+ }
+ case ERFSLEEP:
+ if (ppsc->rfpwr_state == ERFOFF)
+ return false;
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ "Set ERFSLEEP awaked:%d ms\n",
+ jiffies_to_msecs(jiffies -
+ ppsc->last_awake_jiffies));
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ "sleep awaked:%d ms state_inap:%x\n",
+ jiffies_to_msecs(jiffies -
+ ppsc->last_awake_jiffies),
+ rtlpriv->psc.state_inap);
+ ppsc->last_sleep_jiffies = jiffies;
+ _rtl92se_phy_set_rf_sleep(hw);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ bresult = false;
+ break;
+ }
+
+ if (bresult)
+ ppsc->rfpwr_state = rfpwr_state;
+
+ return bresult;
+}
+
+static bool _rtl92s_phy_config_rfpa_bias_current(struct ieee80211_hw *hw,
+ enum radio_path rfpath)
+{
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ bool rtstatus = true;
+ u32 tmpval = 0;
+
+ /* If inferiority IC, we have to increase the PA bias current */
+ if (rtlhal->ic_class != IC_INFERIORITY_A) {
+ tmpval = rtl92s_phy_query_rf_reg(hw, rfpath, RF_IPA, 0xf);
+ rtl92s_phy_set_rf_reg(hw, rfpath, RF_IPA, 0xf, tmpval + 1);
+ }
+
+ return rtstatus;
+}
+
+static void _rtl92s_store_pwrindex_diffrate_offset(struct ieee80211_hw *hw,
+ u32 reg_addr, u32 bitmask, u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ int index;
+
+ if (reg_addr == RTXAGC_RATE18_06)
+ index = 0;
+ else if (reg_addr == RTXAGC_RATE54_24)
+ index = 1;
+ else if (reg_addr == RTXAGC_CCK_MCS32)
+ index = 6;
+ else if (reg_addr == RTXAGC_MCS03_MCS00)
+ index = 2;
+ else if (reg_addr == RTXAGC_MCS07_MCS04)
+ index = 3;
+ else if (reg_addr == RTXAGC_MCS11_MCS08)
+ index = 4;
+ else if (reg_addr == RTXAGC_MCS15_MCS12)
+ index = 5;
+ else
+ return;
+
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][index] = data;
+ if (index == 5)
+ rtlphy->pwrgroup_cnt++;
+}
+
+static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /*RF Interface Sowrtware Control */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+
+ /* RF Interface Readback Value */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+
+ /* RF Interface Output (and Enable) */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfo = RFPGA0_XC_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfo = RFPGA0_XD_RFINTERFACEOE;
+
+ /* RF Interface (Output and) Enable */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfe = RFPGA0_XC_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfe = RFPGA0_XD_RFINTERFACEOE;
+
+ /* Addr of LSSI. Wirte RF register by driver */
+ rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
+ RFPGA0_XA_LSSIPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =
+ RFPGA0_XB_LSSIPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_C].rf3wire_offset =
+ RFPGA0_XC_LSSIPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_D].rf3wire_offset =
+ RFPGA0_XD_LSSIPARAMETER;
+
+ /* RF parameter */
+ rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+
+ /* Tx AGC Gain Stage (same for all path. Should we remove this?) */
+ rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+ rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+ rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+ rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+
+ /* Tranceiver A~D HSSI Parameter-1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
+ rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
+ rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para1 = RFPGA0_XC_HSSIPARAMETER1;
+ rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para1 = RFPGA0_XD_HSSIPARAMETER1;
+
+ /* Tranceiver A~D HSSI Parameter-2 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2;
+ rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2;
+ rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para2 = RFPGA0_XC_HSSIPARAMETER2;
+ rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para2 = RFPGA0_XD_HSSIPARAMETER2;
+
+ /* RF switch Control */
+ rtlphy->phyreg_def[RF90_PATH_A].rfswitch_control =
+ RFPGA0_XAB_SWITCHCONTROL;
+ rtlphy->phyreg_def[RF90_PATH_B].rfswitch_control =
+ RFPGA0_XAB_SWITCHCONTROL;
+ rtlphy->phyreg_def[RF90_PATH_C].rfswitch_control =
+ RFPGA0_XCD_SWITCHCONTROL;
+ rtlphy->phyreg_def[RF90_PATH_D].rfswitch_control =
+ RFPGA0_XCD_SWITCHCONTROL;
+
+ /* AGC control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1;
+ rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1;
+ rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1;
+ rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1;
+
+ /* AGC control 2 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2;
+ rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2;
+ rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2;
+ rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2;
+
+ /* RX AFE control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbalance =
+ ROFDM0_XARXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbalance =
+ ROFDM0_XBRXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbalance =
+ ROFDM0_XCRXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbalance =
+ ROFDM0_XDRXIQIMBALANCE;
+
+ /* RX AFE control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE;
+
+ /* Tx AFE control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbalance =
+ ROFDM0_XATXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbalance =
+ ROFDM0_XBTXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbalance =
+ ROFDM0_XCTXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbalance =
+ ROFDM0_XDTXIQIMBALANCE;
+
+ /* Tx AFE control 2 */
+ rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE;
+ rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE;
+ rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
+ rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
+
+ /* Tranceiver LSSI Readback */
+ rtlphy->phyreg_def[RF90_PATH_A].rflssi_readback =
+ RFPGA0_XA_LSSIREADBACK;
+ rtlphy->phyreg_def[RF90_PATH_B].rflssi_readback =
+ RFPGA0_XB_LSSIREADBACK;
+ rtlphy->phyreg_def[RF90_PATH_C].rflssi_readback =
+ RFPGA0_XC_LSSIREADBACK;
+ rtlphy->phyreg_def[RF90_PATH_D].rflssi_readback =
+ RFPGA0_XD_LSSIREADBACK;
+
+ /* Tranceiver LSSI Readback PI mode */
+ rtlphy->phyreg_def[RF90_PATH_A].rflssi_readbackpi =
+ TRANSCEIVERA_HSPI_READBACK;
+ rtlphy->phyreg_def[RF90_PATH_B].rflssi_readbackpi =
+ TRANSCEIVERB_HSPI_READBACK;
+}
+
+
+static bool _rtl92s_phy_config_bb(struct ieee80211_hw *hw, u8 configtype)
+{
+ //int i;
+ u32 *phy_reg_table;
+ u32 *agc_table;
+ u16 phy_reg_len, agc_len;
+
+ agc_len = AGCTAB_ARRAYLENGTH;
+ agc_table = rtl8192seagctab_array;
+ /* Default RF_type: 2T2R */
+ phy_reg_len = PHY_REG_2T2RARRAYLENGTH;
+ phy_reg_table = rtl8192sephy_reg_2t2rarray;
+
+#if 0
+/* this takes forever to complete... comment out for now */
+ if (configtype == BASEBAND_CONFIG_PHY_REG) {
+ for (i = 0; i < phy_reg_len; i = i + 2) {
+ if (phy_reg_table[i] == 0xfe)
+ mdelay(50);
+ else if (phy_reg_table[i] == 0xfd)
+ mdelay(5);
+ else if (phy_reg_table[i] == 0xfc)
+ mdelay(1);
+ else if (phy_reg_table[i] == 0xfb)
+ udelay(50);
+ else if (phy_reg_table[i] == 0xfa)
+ udelay(5);
+ else if (phy_reg_table[i] == 0xf9)
+ udelay(1);
+
+ /* Add delay for ECS T20 & LG malow platform, */
+ udelay(1);
+
+ rtl92s_phy_set_bb_reg(hw, phy_reg_table[i], MASKDWORD,
+ phy_reg_table[i + 1]);
+ }
+ } else if (configtype == BASEBAND_CONFIG_AGC_TAB) {
+ for (i = 0; i < agc_len; i = i + 2) {
+ rtl92s_phy_set_bb_reg(hw, agc_table[i], MASKDWORD,
+ agc_table[i + 1]);
+
+ /* Add delay for ECS T20 & LG malow platform */
+ udelay(1);
+ }
+ }
+#endif
+
+ return true;
+}
+
+static bool _rtl92s_phy_set_bb_to_diff_rf(struct ieee80211_hw *hw,
+ u8 configtype)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 *phy_regarray2xtxr_table;
+ u16 phy_regarray2xtxr_len;
+ int i;
+
+ // XXX
+ return true;
+
+ if (rtlphy->rf_type == RF_1T1R) {
+ phy_regarray2xtxr_table = rtl8192sephy_changeto_1t1rarray;
+ phy_regarray2xtxr_len = PHY_CHANGETO_1T1RARRAYLENGTH;
+ } else if (rtlphy->rf_type == RF_1T2R) {
+ phy_regarray2xtxr_table = rtl8192sephy_changeto_1t2rarray;
+ phy_regarray2xtxr_len = PHY_CHANGETO_1T2RARRAYLENGTH;
+ } else {
+ return false;
+ }
+
+ if (configtype == BASEBAND_CONFIG_PHY_REG) {
+ for (i = 0; i < phy_regarray2xtxr_len; i = i + 3) {
+ if (phy_regarray2xtxr_table[i] == 0xfe)
+ mdelay(50);
+ else if (phy_regarray2xtxr_table[i] == 0xfd)
+ mdelay(5);
+ else if (phy_regarray2xtxr_table[i] == 0xfc)
+ mdelay(1);
+ else if (phy_regarray2xtxr_table[i] == 0xfb)
+ udelay(50);
+ else if (phy_regarray2xtxr_table[i] == 0xfa)
+ udelay(5);
+ else if (phy_regarray2xtxr_table[i] == 0xf9)
+ udelay(1);
+
+ rtl92s_phy_set_bb_reg(hw, phy_regarray2xtxr_table[i],
+ phy_regarray2xtxr_table[i + 1],
+ phy_regarray2xtxr_table[i + 2]);
+ }
+ }
+
+ return true;
+}
+
+static bool _rtl92s_phy_config_bb_with_pg(struct ieee80211_hw *hw,
+ u8 configtype)
+{
+ int i;
+ u32 *phy_table_pg;
+ u16 phy_pg_len;
+
+ // XXX
+ return true;
+
+ phy_pg_len = PHY_REG_ARRAY_PGLENGTH;
+ phy_table_pg = rtl8192sephy_reg_array_pg;
+
+ if (configtype == BASEBAND_CONFIG_PHY_REG) {
+ for (i = 0; i < phy_pg_len; i = i + 3) {
+ if (phy_table_pg[i] == 0xfe)
+ mdelay(50);
+ else if (phy_table_pg[i] == 0xfd)
+ mdelay(5);
+ else if (phy_table_pg[i] == 0xfc)
+ mdelay(1);
+ else if (phy_table_pg[i] == 0xfb)
+ udelay(50);
+ else if (phy_table_pg[i] == 0xfa)
+ udelay(5);
+ else if (phy_table_pg[i] == 0xf9)
+ udelay(1);
+
+ _rtl92s_store_pwrindex_diffrate_offset(hw,
+ phy_table_pg[i],
+ phy_table_pg[i + 1],
+ phy_table_pg[i + 2]);
+ rtl92s_phy_set_bb_reg(hw, phy_table_pg[i],
+ phy_table_pg[i + 1],
+ phy_table_pg[i + 2]);
+ }
+ }
+
+ return true;
+}
+
+static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ bool rtstatus = true;
+
+ // XXX
+ return true;
+
+ /* 1. Read PHY_REG.TXT BB INIT!! */
+ /* We will separate as 1T1R/1T2R/1T2R_GREEN/2T2R */
+ if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_2T2R ||
+ rtlphy->rf_type == RF_1T1R || rtlphy->rf_type == RF_2T2R_GREEN) {
+ rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_PHY_REG);
+
+ if (rtlphy->rf_type != RF_2T2R &&
+ rtlphy->rf_type != RF_2T2R_GREEN)
+ /* so we should reconfig BB reg with the right
+ * PHY parameters. */
+ rtstatus = _rtl92s_phy_set_bb_to_diff_rf(hw,
+ BASEBAND_CONFIG_PHY_REG);
+ } else {
+ rtstatus = false;
+ }
+
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ "Write BB Reg Fail!!\n");
+ goto phy_BB8190_Config_ParaFile_Fail;
+ }
+
+ /* 2. If EEPROM or EFUSE autoload OK, We must config by
+ * PHY_REG_PG.txt */
+ if (rtlefuse->autoload_failflag == false) {
+ rtlphy->pwrgroup_cnt = 0;
+
+ rtstatus = _rtl92s_phy_config_bb_with_pg(hw,
+ BASEBAND_CONFIG_PHY_REG);
+ }
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ "_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
+ goto phy_BB8190_Config_ParaFile_Fail;
+ }
+
+ /* 3. BB AGC table Initialization */
+ rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);
+
+ if (!rtstatus) {
+ pr_err("%s(): AGC Table Fail\n", __func__);
+ goto phy_BB8190_Config_ParaFile_Fail;
+ }
+
+ /* Check if the CCK HighPower is turned ON. */
+ /* This is used to calculate PWDB. */
+ rtlphy->cck_high_power = (bool)(rtl92s_phy_query_bb_reg(hw,
+ RFPGA0_XA_HSSIPARAMETER2, 0x200));
+
+phy_BB8190_Config_ParaFile_Fail:
+ return rtstatus;
+}
+
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ int i;
+ bool rtstatus = true;
+ u32 *radio_a_table;
+ u32 *radio_b_table;
+ u16 radio_a_tblen, radio_b_tblen;
+
+ // XXX
+ return true;
+
+ radio_a_tblen = RADIOA_1T_ARRAYLENGTH;
+ radio_a_table = rtl8192seradioa_1t_array;
+
+ /* Using Green mode array table for RF_2T2R_GREEN */
+ if (rtlphy->rf_type == RF_2T2R_GREEN) {
+ radio_b_table = rtl8192seradiob_gm_array;
+ radio_b_tblen = RADIOB_GM_ARRAYLENGTH;
+ } else {
+ radio_b_table = rtl8192seradiob_array;
+ radio_b_tblen = RADIOB_ARRAYLENGTH;
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Radio No %x\n", rfpath);
+ rtstatus = true;
+
+ switch (rfpath) {
+ case RF90_PATH_A:
+ for (i = 0; i < radio_a_tblen; i = i + 2) {
+ if (radio_a_table[i] == 0xfe)
+ /* Delay specific ms. Only RF configuration
+ * requires delay. */
+ mdelay(50);
+ else if (radio_a_table[i] == 0xfd)
+ mdelay(5);
+ else if (radio_a_table[i] == 0xfc)
+ mdelay(1);
+ else if (radio_a_table[i] == 0xfb)
+ udelay(50);
+ else if (radio_a_table[i] == 0xfa)
+ udelay(5);
+ else if (radio_a_table[i] == 0xf9)
+ udelay(1);
+ else
+ rtl92s_phy_set_rf_reg(hw, rfpath,
+ radio_a_table[i],
+ MASK20BITS,
+ radio_a_table[i + 1]);
+
+ /* Add delay for ECS T20 & LG malow platform */
+ udelay(1);
+ }
+
+ /* PA Bias current for inferiority IC */
+ _rtl92s_phy_config_rfpa_bias_current(hw, rfpath);
+ break;
+ case RF90_PATH_B:
+ for (i = 0; i < radio_b_tblen; i = i + 2) {
+ if (radio_b_table[i] == 0xfe)
+ /* Delay specific ms. Only RF configuration
+ * requires delay.*/
+ mdelay(50);
+ else if (radio_b_table[i] == 0xfd)
+ mdelay(5);
+ else if (radio_b_table[i] == 0xfc)
+ mdelay(1);
+ else if (radio_b_table[i] == 0xfb)
+ udelay(50);
+ else if (radio_b_table[i] == 0xfa)
+ udelay(5);
+ else if (radio_b_table[i] == 0xf9)
+ udelay(1);
+ else
+ rtl92s_phy_set_rf_reg(hw, rfpath,
+ radio_b_table[i],
+ MASK20BITS,
+ radio_b_table[i + 1]);
+
+ /* Add delay for ECS T20 & LG malow platform */
+ udelay(1);
+ }
+ break;
+ case RF90_PATH_C:
+ ;
+ break;
+ case RF90_PATH_D:
+ ;
+ break;
+ default:
+ break;
+ }
+
+ return rtstatus;
+}
+
+
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw)
+{
+/*
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 i;
+ u32 arraylength;
+ u32 *ptraArray;
+
+ arraylength = MAC_2T_ARRAYLENGTH;
+ ptraArray = rtl8192semac_2t_array;
+
+ for (i = 0; i < arraylength; i = i + 2)
+ rtl_write_byte(rtlpriv, ptraArray[i], (u8)ptraArray[i + 1]);
+*/
+
+ return true;
+}
+
+
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ bool rtstatus = true;
+ u8 pathmap, index, rf_num = 0;
+ u8 path1, path2;
+
+ // XXX
+ return true;
+
+ _rtl92s_phy_init_register_definition(hw);
+
+ /* Config BB and AGC */
+ rtstatus = _rtl92s_phy_bb_config_parafile(hw);
+
+
+ /* Check BB/RF confiuration setting. */
+ /* We only need to configure RF which is turned on. */
+ path1 = (u8)(rtl92s_phy_query_bb_reg(hw, RFPGA0_TXINFO, 0xf));
+ mdelay(10);
+ path2 = (u8)(rtl92s_phy_query_bb_reg(hw, ROFDM0_TRXPATHENABLE, 0xf));
+ pathmap = path1 | path2;
+
+ rtlphy->rf_pathmap = pathmap;
+ for (index = 0; index < 4; index++) {
+ if ((pathmap >> index) & 0x1)
+ rf_num++;
+ }
+
+ if ((rtlphy->rf_type == RF_1T1R && rf_num != 1) ||
+ (rtlphy->rf_type == RF_1T2R && rf_num != 2) ||
+ (rtlphy->rf_type == RF_2T2R && rf_num != 2) ||
+ (rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ "RF_Type(%x) does not match RF_Num(%x)!!\n",
+ rtlphy->rf_type, rf_num);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ "path1 0x%x, path2 0x%x, pathmap 0x%x\n",
+ path1, path2, pathmap);
+ }
+
+ return rtstatus;
+}
+
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /* Initialize general global value */
+ if (rtlphy->rf_type == RF_1T1R)
+ rtlphy->num_total_rfpath = 1;
+ else
+ rtlphy->num_total_rfpath = 2;
+
+ /* Config BB and RF */
+ return rtl92s_phy_rf6052_config(hw);
+}
+
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /* read rx initial gain */
+ rtlphy->default_initialgain[0] = rtl_get_bbreg(hw,
+ ROFDM0_XAAGCCORE1, MASKBYTE0);
+ rtlphy->default_initialgain[1] = rtl_get_bbreg(hw,
+ ROFDM0_XBAGCCORE1, MASKBYTE0);
+ rtlphy->default_initialgain[2] = rtl_get_bbreg(hw,
+ ROFDM0_XCAGCCORE1, MASKBYTE0);
+ rtlphy->default_initialgain[3] = rtl_get_bbreg(hw,
+ ROFDM0_XDAGCCORE1, MASKBYTE0);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n",
+ rtlphy->default_initialgain[0],
+ rtlphy->default_initialgain[1],
+ rtlphy->default_initialgain[2],
+ rtlphy->default_initialgain[3]);
+
+ /* read framesync */
+ rtlphy->framesync = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR3, MASKBYTE0);
+ rtlphy->framesync_c34 = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR2,
+ MASKDWORD);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Default framesync (0x%x) = 0x%x\n",
+ ROFDM0_RXDETECTOR3, rtlphy->framesync);
+
+}
+
+static void _rtl92s_phy_get_txpower_index(struct ieee80211_hw *hw, u8 channel,
+ u8 *cckpowerlevel, u8 *ofdmpowerLevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 index = (channel - 1);
+
+ /* 1. CCK */
+ /* RF-A */
+ cckpowerlevel[0] = rtlefuse->txpwrlevel_cck[0][index];
+ /* RF-B */
+ cckpowerlevel[1] = rtlefuse->txpwrlevel_cck[1][index];
+
+ /* 2. OFDM for 1T or 2T */
+ if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_1T1R) {
+ /* Read HT 40 OFDM TX power */
+ ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_1s[0][index];
+ ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_1s[1][index];
+ } else if (rtlphy->rf_type == RF_2T2R) {
+ /* Read HT 40 OFDM TX power */
+ ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_2s[0][index];
+ ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_2s[1][index];
+ }
+}
+
+static void _rtl92s_phy_ccxpower_indexcheck(struct ieee80211_hw *hw,
+ u8 channel, u8 *cckpowerlevel, u8 *ofdmpowerlevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ rtlphy->cur_cck_txpwridx = cckpowerlevel[0];
+ rtlphy->cur_ofdm24g_txpwridx = ofdmpowerlevel[0];
+}
+
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ /* [0]:RF-A, [1]:RF-B */
+ u8 cckpowerlevel[2], ofdmpowerLevel[2];
+
+ // XXX
+ return;
+
+ if (!rtlefuse->txpwr_fromeprom)
+ return;
+
+ /* Mainly we use RF-A Tx Power to write the Tx Power registers,
+ * but the RF-B Tx Power must be calculated by the antenna diff.
+ * So we have to rewrite Antenna gain offset register here.
+ * Please refer to BB register 0x80c
+ * 1. For CCK.
+ * 2. For OFDM 1T or 2T */
+ _rtl92s_phy_get_txpower_index(hw, channel, &cckpowerlevel[0],
+ &ofdmpowerLevel[0]);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "Channel-%d, cckPowerLevel (A / B) = 0x%x / 0x%x, ofdmPowerLevel (A / B) = 0x%x / 0x%x\n",
+ channel, cckpowerlevel[0], cckpowerlevel[1],
+ ofdmpowerLevel[0], ofdmpowerLevel[1]);
+
+ _rtl92s_phy_ccxpower_indexcheck(hw, channel, &cckpowerlevel[0],
+ &ofdmpowerLevel[0]);
+
+ rtl92s_phy_rf6052_set_ccktxpower(hw, cckpowerlevel[0]);
+ rtl92s_phy_rf6052_set_ofdmtxpower(hw, &ofdmpowerLevel[0], channel);
+
+}
+
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw)
+{
+ // XXX
+ return;
+#if 0
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 pollingcnt = 10000;
+ u32 tmpvalue;
+
+ /* Make sure that CMD IO has be accepted by FW. */
+ do {
+ udelay(10);
+
+ tmpvalue = rtl_read_dword(rtlpriv, WFM5);
+ if (tmpvalue == 0)
+ break;
+ } while (--pollingcnt);
+
+ if (pollingcnt == 0)
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Set FW Cmd fail!!\n");
+#endif
+}
+
+#if 0
+static void _rtl92s_phy_set_fwcmd_io(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 input, current_aid = 0;
+
+ if (is_hal_stop(rtlhal))
+ return;
+
+ /* We re-map RA related CMD IO to combinational ones */
+ /* if FW version is v.52 or later. */
+ switch (rtlhal->current_fwcmd_io) {
+ case FW_CMD_RA_REFRESH_N:
+ rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_N_COMB;
+ break;
+ case FW_CMD_RA_REFRESH_BG:
+ rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_BG_COMB;
+ break;
+ default:
+ break;
+ }
+
+ switch (rtlhal->current_fwcmd_io) {
+ case FW_CMD_RA_RESET:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, "FW_CMD_RA_RESET\n");
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_ACTIVE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, "FW_CMD_RA_ACTIVE\n");
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_N:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, "FW_CMD_RA_REFRESH_N\n");
+ input = FW_RA_REFRESH;
+ rtl_write_dword(rtlpriv, WFM5, input);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_ENABLE_RSSI_MASK);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_BG:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ "FW_CMD_RA_REFRESH_BG\n");
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_DISABLE_RSSI_MASK);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_N_COMB:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ "FW_CMD_RA_REFRESH_N_COMB\n");
+ input = FW_RA_IOT_N_COMB;
+ rtl_write_dword(rtlpriv, WFM5, input);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_BG_COMB:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ "FW_CMD_RA_REFRESH_BG_COMB\n");
+ input = FW_RA_IOT_BG_COMB;
+ rtl_write_dword(rtlpriv, WFM5, input);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_IQK_ENABLE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, "FW_CMD_IQK_ENABLE\n");
+ rtl_write_dword(rtlpriv, WFM5, FW_IQK_ENABLE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_PAUSE_DM_BY_SCAN:
+ /* Lower initial gain */
+ rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+ rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+ break;
+ case FW_CMD_RESUME_DM_BY_SCAN:
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+ rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+ break;
+ case FW_CMD_HIGH_PWR_DISABLE:
+ if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE)
+ break;
+
+ /* Lower initial gain */
+ rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+ rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+ break;
+ case FW_CMD_HIGH_PWR_ENABLE:
+ if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+ rtlpriv->dm.dynamic_txpower_enable)
+ break;
+
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+ break;
+ case FW_CMD_LPS_ENTER:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, "FW_CMD_LPS_ENTER\n");
+ current_aid = rtlpriv->mac80211.assoc_id;
+ rtl_write_dword(rtlpriv, WFM5, (FW_LPS_ENTER |
+ ((current_aid | 0xc000) << 8)));
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ /* FW set TXOP disable here, so disable EDCA
+ * turbo mode until driver leave LPS */
+ break;
+ case FW_CMD_LPS_LEAVE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, "FW_CMD_LPS_LEAVE\n");
+ rtl_write_dword(rtlpriv, WFM5, FW_LPS_LEAVE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_ADD_A2_ENTRY:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, "FW_CMD_ADD_A2_ENTRY\n");
+ rtl_write_dword(rtlpriv, WFM5, FW_ADD_A2_ENTRY);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_CTRL_DM_BY_DRIVER:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ "FW_CMD_CTRL_DM_BY_DRIVER\n");
+ rtl_write_dword(rtlpriv, WFM5, FW_CTRL_DM_BY_DRIVER);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+
+ default:
+ break;
+ }
+
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+
+ /* Clear FW CMD operation flag. */
+ rtlhal->set_fwcmd_inprogress = false;
+}
+#endif
+
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fw_cmdio)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct dig_t *digtable = &rtlpriv->dm_digtable;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 fw_param = FW_CMD_IO_PARA_QUERY(rtlpriv);
+ u16 fw_cmdmap = FW_CMD_IO_QUERY(rtlpriv);
+ bool bPostProcessing = false;
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ "Set FW Cmd(%#x), set_fwcmd_inprogress(%d)\n",
+ fw_cmdio, rtlhal->set_fwcmd_inprogress);
+
+ // XXX
+ return true;
+
+ do {
+ /* We re-map to combined FW CMD ones if firmware version */
+ /* is v.53 or later. */
+ switch (fw_cmdio) {
+ case FW_CMD_RA_REFRESH_N:
+ fw_cmdio = FW_CMD_RA_REFRESH_N_COMB;
+ break;
+ case FW_CMD_RA_REFRESH_BG:
+ fw_cmdio = FW_CMD_RA_REFRESH_BG_COMB;
+ break;
+ default:
+ break;
+ }
+
+ /* If firmware version is v.62 or later,
+ * use FW_CMD_IO_SET for FW_CMD_CTRL_DM_BY_DRIVER */
+ if (hal_get_firmwareversion(rtlpriv) >= 0x3E) {
+ if (fw_cmdio == FW_CMD_CTRL_DM_BY_DRIVER)
+ fw_cmdio = FW_CMD_CTRL_DM_BY_DRIVER_NEW;
+ }
+
+
+ /* We shall revise all FW Cmd IO into Reg0x364
+ * DM map table in the future. */
+ switch (fw_cmdio) {
+ case FW_CMD_RA_INIT:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, "RA init!!\n");
+ fw_cmdmap |= FW_RA_INIT_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_RA_INIT_CTL);
+ break;
+ case FW_CMD_DIG_DISABLE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ "Set DIG disable!!\n");
+ fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_DIG_ENABLE:
+ case FW_CMD_DIG_RESUME:
+ if (!(rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE)) {
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ "Set DIG enable or resume!!\n");
+ fw_cmdmap |= (FW_DIG_ENABLE_CTL | FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ }
+ break;
+ case FW_CMD_DIG_HALT:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ "Set DIG halt!!\n");
+ fw_cmdmap &= ~(FW_DIG_ENABLE_CTL | FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_TXPWR_TRACK_THERMAL: {
+ u8 thermalval = 0;
+ fw_cmdmap |= FW_PWR_TRK_CTL;
+
+ /* Clear FW parameter in terms of thermal parts. */
+ fw_param &= FW_PWR_TRK_PARAM_CLR;
+
+ thermalval = rtlpriv->dm.thermalvalue;
+ fw_param |= ((thermalval << 24) |
+ (rtlefuse->thermalmeter[0] << 16));
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ "Set TxPwr tracking!! FwCmdMap(%#x), FwParam(%#x)\n",
+ fw_cmdmap, fw_param);
+
+ FW_CMD_PARA_SET(rtlpriv, fw_param);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_PWR_TRK_CTL);
+ }
+ break;
+ /* The following FW CMDs are only compatible to
+ * v.53 or later. */
+ case FW_CMD_RA_REFRESH_N_COMB:
+ fw_cmdmap |= FW_RA_N_CTL;
+
+ /* Clear RA BG mode control. */
+ fw_cmdmap &= ~(FW_RA_BG_CTL | FW_RA_INIT_CTL);
+
+ /* Clear FW parameter in terms of RA parts. */
+ fw_param &= FW_RA_PARAM_CLR;
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ "[FW CMD] [New Version] Set RA/IOT Comb in n mode!! FwCmdMap(%#x), FwParam(%#x)\n",
+ fw_cmdmap, fw_param);
+
+ FW_CMD_PARA_SET(rtlpriv, fw_param);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_RA_N_CTL);
+ break;
+ case FW_CMD_RA_REFRESH_BG_COMB:
+ fw_cmdmap |= FW_RA_BG_CTL;
+
+ /* Clear RA n-mode control. */
+ fw_cmdmap &= ~(FW_RA_N_CTL | FW_RA_INIT_CTL);
+ /* Clear FW parameter in terms of RA parts. */
+ fw_param &= FW_RA_PARAM_CLR;
+
+ FW_CMD_PARA_SET(rtlpriv, fw_param);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_RA_BG_CTL);
+ break;
+ case FW_CMD_IQK_ENABLE:
+ fw_cmdmap |= FW_IQK_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_IQK_CTL);
+ break;
+ /* The following FW CMD is compatible to v.62 or later. */
+ case FW_CMD_CTRL_DM_BY_DRIVER_NEW:
+ fw_cmdmap |= FW_DRIVER_CTRL_DM_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ /* The followed FW Cmds needs post-processing later. */
+ case FW_CMD_RESUME_DM_BY_SCAN:
+ fw_cmdmap |= (FW_DIG_ENABLE_CTL |
+ FW_HIGH_PWR_ENABLE_CTL |
+ FW_SS_CTL);
+
+ if (rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE ||
+ !digtable->dig_enable_flag)
+ fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+ if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+ rtlpriv->dm.dynamic_txpower_enable)
+ fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+
+ if ((digtable->dig_ext_port_stage ==
+ DIG_EXT_PORT_STAGE_0) ||
+ (digtable->dig_ext_port_stage ==
+ DIG_EXT_PORT_STAGE_1))
+ fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ break;
+ case FW_CMD_PAUSE_DM_BY_SCAN:
+ fw_cmdmap &= ~(FW_DIG_ENABLE_CTL |
+ FW_HIGH_PWR_ENABLE_CTL |
+ FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ break;
+ case FW_CMD_HIGH_PWR_DISABLE:
+ fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ break;
+ case FW_CMD_HIGH_PWR_ENABLE:
+ if (!(rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) &&
+ !rtlpriv->dm.dynamic_txpower_enable) {
+ fw_cmdmap |= (FW_HIGH_PWR_ENABLE_CTL |
+ FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ }
+ break;
+ case FW_CMD_DIG_MODE_FA:
+ fw_cmdmap |= FW_FA_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_DIG_MODE_SS:
+ fw_cmdmap &= ~FW_FA_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_PAPE_CONTROL:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ "[FW CMD] Set PAPE Control\n");
+ fw_cmdmap &= ~FW_PAPE_CTL_BY_SW_HW;
+
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ default:
+ /* Pass to original FW CMD processing callback
+ * routine. */
+ bPostProcessing = true;
+ break;
+ }
+ } while (false);
+
+ /* We shall post processing these FW CMD if
+ * variable bPostProcessing is set. */
+ if (bPostProcessing && !rtlhal->set_fwcmd_inprogress) {
+ rtlhal->set_fwcmd_inprogress = true;
+ /* Update current FW Cmd for callback use. */
+ rtlhal->current_fwcmd_io = fw_cmdio;
+ } else {
+ return false;
+ }
+
+ //_rtl92s_phy_set_fwcmd_io(hw);
+ return true;
+}
+
+static void _rtl92s_phy_check_ephy_switchready(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 delay = 100;
+ u8 regu1;
+
+ regu1 = rtl_read_byte(rtlpriv, 0x554);
+ while ((regu1 & BIT(5)) && (delay > 0)) {
+ regu1 = rtl_read_byte(rtlpriv, 0x554);
+ delay--;
+ /* We delay only 50us to prevent
+ * being scheduled out. */
+ udelay(50);
+ }
+}
+
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ // XXX
+ return;
+
+ /* The way to be capable to switch clock request
+ * when the PG setting does not support clock request.
+ * This is the backdoor solution to switch clock
+ * request before ASPM or D3. */
+ rtl_write_dword(rtlpriv, 0x540, 0x73c11);
+ rtl_write_dword(rtlpriv, 0x548, 0x2407c);
+
+ /* Switch EPHY parameter!!!! */
+ rtl_write_word(rtlpriv, 0x550, 0x1000);
+ rtl_write_byte(rtlpriv, 0x554, 0x20);
+ _rtl92s_phy_check_ephy_switchready(hw);
+
+ rtl_write_word(rtlpriv, 0x550, 0xa0eb);
+ rtl_write_byte(rtlpriv, 0x554, 0x3e);
+ _rtl92s_phy_check_ephy_switchready(hw);
+
+ rtl_write_word(rtlpriv, 0x550, 0xff80);
+ rtl_write_byte(rtlpriv, 0x554, 0x39);
+ _rtl92s_phy_check_ephy_switchready(hw);
+
+ /* Delay L1 enter time */
+ if (ppsc->support_aspm && !ppsc->support_backdoor)
+ rtl_write_byte(rtlpriv, 0x560, 0x40);
+ else
+ rtl_write_byte(rtlpriv, 0x560, 0x00);
+
+}
+
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 BeaconInterval)
+{
+/*
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ rtl_write_dword(rtlpriv, WFM5, 0xF1000000 | (BeaconInterval << 8));
+*/
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/phy.h b/drivers/net/wireless/rtlwifi/rtl8192su/phy.h
new file mode 100644
index 0000000..02a9ecf
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/phy.h
@@ -0,0 +1,100 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+#ifndef __RTL92S_PHY_H__
+#define __RTL92S_PHY_H__
+
+#define MAX_TXPWR_IDX_NMODE_92S 63
+#define MAX_DOZE_WAITING_TIMES_9x 64
+
+/* Channel switch:The size of
+ * command tables for switch channel */
+#define MAX_PRECMD_CNT 16
+#define MAX_RFDEPENDCMD_CNT 16
+#define MAX_POSTCMD_CNT 16
+
+#define RF90_PATH_MAX 4
+
+enum version_8192s {
+ VERSION_8192S_ACUT,
+ VERSION_8192S_BCUT,
+ VERSION_8192S_CCUT
+};
+
+enum swchnlcmd_id {
+ CMDID_END,
+ CMDID_SET_TXPOWEROWER_LEVEL,
+ CMDID_BBREGWRITE10,
+ CMDID_WRITEPORT_ULONG,
+ CMDID_WRITEPORT_USHORT,
+ CMDID_WRITEPORT_UCHAR,
+ CMDID_RF_WRITEREG,
+};
+
+struct swchnlcmd {
+ enum swchnlcmd_id cmdid;
+ u32 para1;
+ u32 para2;
+ u32 msdelay;
+};
+
+enum baseband_config_type {
+ /* Radio Path A */
+ BASEBAND_CONFIG_PHY_REG = 0,
+ /* Radio Path B */
+ BASEBAND_CONFIG_AGC_TAB = 1,
+};
+
+#define hal_get_firmwareversion(rtlpriv) \
+ (((struct rt_firmware *)(rtlpriv->rtlhal.pfirmware))->firmwareversion)
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+ u32 data);
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data);
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+ enum nl80211_channel_type ch_type);
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw);
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate rfpower_state);
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw);
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw);
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw);
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel);
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fwcmd_io);
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw);
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 beaconinterval);
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath) ;
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/reg.h b/drivers/net/wireless/rtlwifi/rtl8192su/reg.h
new file mode 100644
index 0000000..c29c0b2
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/reg.h
@@ -0,0 +1,1232 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_92S_REG_H__
+#define __REALTEK_92S_REG_H__
+
+/* 1. System Configuration Registers */
+#define REG_SYS_ISO_CTRL 0x0000
+#define REG_SYS_FUNC_EN 0x0002
+#define PMC_FSM 0x0004
+#define SYS_CLKR 0x0008
+#define EPROM_CMD 0x000A
+#define EE_VPD 0x000C
+#define AFE_MISC 0x0010
+#define SPS0_CTRL 0x0011
+#define SPS1_CTRL 0x0018
+#define RF_CTRL 0x001F
+#define LDOA15_CTRL 0x0020
+#define LDOV12D_CTRL 0x0021
+#define LDOHCI12_CTRL 0x0022
+#define LDO_USB_SDIO 0x0023
+#define LPLDO_CTRL 0x0024
+#define AFE_XTAL_CTRL 0x0026
+#define AFE_PLL_CTRL 0x0028
+#define REG_EFUSE_CTRL 0x0030
+#define REG_EFUSE_TEST 0x0034
+#define PWR_DATA 0x0038
+#define DBG_PORT 0x003A
+#define DPS_TIMER 0x003C
+#define RCLK_MON 0x003E
+
+/* 2. Command Control Registers */
+#define CMDR 0x0040
+#define TXPAUSE 0x0042
+#define LBKMD_SEL 0x0043
+#define TCR 0x0044
+#define RCR 0x0048
+#define MSR 0x004C
+#define SYSF_CFG 0x004D
+#define RX_PKY_LIMIT 0x004E
+#define MBIDCTRL 0x004F
+
+/* 3. MACID Setting Registers */
+#define MACIDR 0x0050
+#define MACIDR0 0x0050
+#define MACIDR4 0x0054
+#define BSSIDR 0x0058
+#define HWVID 0x005E
+#define MAR 0x0060
+#define MBIDCAMCONTENT 0x0068
+#define MBIDCAMCFG 0x0070
+#define BUILDTIME 0x0074
+#define BUILDUSER 0x0078
+
+#define IDR0 MACIDR0
+#define IDR4 MACIDR4
+
+/* 4. Timing Control Registers */
+#define TSFR 0x0080
+#define SLOT_TIME 0x0089
+#define USTIME 0x008A
+#define SIFS_CCK 0x008C
+#define SIFS_OFDM 0x008E
+#define PIFS_TIME 0x0090
+#define ACK_TIMEOUT 0x0091
+#define EIFSTR 0x0092
+#define BCN_INTERVAL 0x0094
+#define ATIMWND 0x0096
+#define BCN_DRV_EARLY_INT 0x0098
+#define BCN_DMATIME 0x009A
+#define BCN_ERR_THRESH 0x009C
+#define MLT 0x009D
+#define RSVD_MAC_TUNE_US 0x009E
+
+/* 5. FIFO Control Registers */
+#define RQPN 0x00A0
+#define RQPN1 0x00A0
+#define RQPN2 0x00A1
+#define RQPN3 0x00A2
+#define RQPN4 0x00A3
+#define RQPN5 0x00A4
+#define RQPN6 0x00A5
+#define RQPN7 0x00A6
+#define RQPN8 0x00A7
+#define RQPN9 0x00A8
+#define RQPN10 0x00A9
+#define LD_RQPN 0x00AB
+#define RXFF_BNDY 0x00AC
+#define RXRPT_BNDY 0x00B0
+#define TXPKTBUF_PGBNDY 0x00B4
+#define PBP 0x00B5
+#define RXDRVINFO_SZ 0x00B6
+#define TXFF_STATUS 0x00B7
+#define RXFF_STATUS 0x00B8
+#define TXFF_EMPTY_TH 0x00B9
+#define SDIO_RX_BLKSZ 0x00BC
+#define RXDMA 0x00BD
+#define RXPKT_NUM 0x00BE
+#define C2HCMD_UDT_SIZE 0x00C0
+#define C2HCMD_UDT_ADDR 0x00C2
+#define FIFOPAGE1 0x00C4
+#define FIFOPAGE2 0x00C8
+#define FIFOPAGE3 0x00CC
+#define FIFOPAGE4 0x00D0
+#define FIFOPAGE5 0x00D4
+#define FW_RSVD_PG_CRTL 0x00D8
+#define RXDMA_AGG_PG_TH 0x00D9
+#define TXDESC_MSK 0x00DC
+#define TXRPTFF_RDPTR 0x00E0
+#define TXRPTFF_WTPTR 0x00E4
+#define C2HFF_RDPTR 0x00E8
+#define C2HFF_WTPTR 0x00EC
+#define RXFF0_RDPTR 0x00F0
+#define RXFF0_WTPTR 0x00F4
+#define RXFF1_RDPTR 0x00F8
+#define RXFF1_WTPTR 0x00FC
+#define RXRPT0_RDPTR 0x0100
+#define RXRPT0_WTPTR 0x0104
+#define RXRPT1_RDPTR 0x0108
+#define RXRPT1_WTPTR 0x010C
+#define RX0_UDT_SIZE 0x0110
+#define RX1PKTNUM 0x0114
+#define RXFILTERMAP 0x0116
+#define RXFILTERMAP_GP1 0x0118
+#define RXFILTERMAP_GP2 0x011A
+#define RXFILTERMAP_GP3 0x011C
+#define BCNQ_CTRL 0x0120
+#define MGTQ_CTRL 0x0124
+#define HIQ_CTRL 0x0128
+#define VOTID7_CTRL 0x012c
+#define VOTID6_CTRL 0x0130
+#define VITID5_CTRL 0x0134
+#define VITID4_CTRL 0x0138
+#define BETID3_CTRL 0x013c
+#define BETID0_CTRL 0x0140
+#define BKTID2_CTRL 0x0144
+#define BKTID1_CTRL 0x0148
+#define CMDQ_CTRL 0x014c
+#define TXPKT_NUM_CTRL 0x0150
+#define TXQ_PGADD 0x0152
+#define TXFF_PG_NUM 0x0154
+#define TRXDMA_STATUS 0x0156
+
+/* 6. Adaptive Control Registers */
+#define INIMCS_SEL 0x0160
+#define TX_RATE_REG INIMCS_SEL
+#define INIRTSMCS_SEL 0x0180
+#define RRSR 0x0181
+#define ARFR0 0x0184
+#define ARFR1 0x0188
+#define ARFR2 0x018C
+#define ARFR3 0x0190
+#define ARFR4 0x0194
+#define ARFR5 0x0198
+#define ARFR6 0x019C
+#define ARFR7 0x01A0
+#define AGGLEN_LMT_H 0x01A7
+#define AGGLEN_LMT_L 0x01A8
+#define DARFRC 0x01B0
+#define RARFRC 0x01B8
+#define MCS_TXAGC 0x01C0
+#define CCK_TXAGC 0x01C8
+
+/* 7. EDCA Setting Registers */
+#define EDCAPARA_VO 0x01D0
+#define EDCAPARA_VI 0x01D4
+#define EDCAPARA_BE 0x01D8
+#define EDCAPARA_BK 0x01DC
+#define BCNTCFG 0x01E0
+#define CWRR 0x01E2
+#define ACMAVG 0x01E4
+#define AcmHwCtrl 0x01E7
+#define VO_ADMTM 0x01E8
+#define VI_ADMTM 0x01EC
+#define BE_ADMTM 0x01F0
+#define RETRY_LIMIT 0x01F4
+#define SG_RATE 0x01F6
+
+/* 8. WMAC, BA and CCX related Register. */
+#define NAV_CTRL 0x0200
+#define BW_OPMODE 0x0203
+#define BACAMCMD 0x0204
+#define BACAMCONTENT 0x0208
+
+/* the 0x2xx register WMAC definition */
+#define LBDLY 0x0210
+#define FWDLY 0x0211
+#define HWPC_RX_CTRL 0x0218
+#define MQIR 0x0220
+#define MAIR 0x0222
+#define MSIR 0x0224
+#define CLM_RESULT 0x0227
+#define NHM_RPI_CNT 0x0228
+#define RXERR_RPT 0x0230
+#define NAV_PROT_LEN 0x0234
+#define CFEND_TH 0x0236
+#define AMPDU_MIN_SPACE 0x0237
+#define TXOP_STALL_CTRL 0x0238
+
+/* 9. Security Control Registers */
+#define REG_RWCAM 0x0240
+#define REG_WCAMI 0x0244
+#define REG_RCAMO 0x0248
+#define REG_CAMDBG 0x024C
+#define REG_SECR 0x0250
+
+/* 10. Power Save Control Registers */
+#define WOW_CTRL 0x0260
+#define PSSTATUS 0x0261
+#define PSSWITCH 0x0262
+#define MIMOPS_WAIT_PERIOD 0x0263
+#define LPNAV_CTRL 0x0264
+#define WFM0 0x0270
+#define WFM1 0x0280
+#define WFM2 0x0290
+#define WFM3 0x02A0
+#define WFM4 0x02B0
+#define WFM5 0x02C0
+#define WFCRC 0x02D0
+#define FW_RPT_REG 0x02c4
+
+/* 11. General Purpose Registers */
+#define PSTIME 0x02E0
+#define TIMER0 0x02E4
+#define TIMER1 0x02E8
+#define GPIO_IN_SE 0x02EC
+#define GPIO_IO_SEL 0x02EE
+#define MAC_PINMUX_CFG 0x02F1
+#define LEDCFG 0x02F2
+#define PHY_REG 0x02F3
+#define PHY_REG_DATA 0x02F4
+#define REG_EFUSE_CLK 0x02F8
+
+/* 12. Host Interrupt Status Registers */
+#define INTA_MASK 0x0300
+#define ISR 0x0308
+
+/* 13. Test Mode and Debug Control Registers */
+#define DBG_PORT_SWITCH 0x003A
+#define BIST 0x0310
+#define DBS 0x0314
+#define CPUINST 0x0318
+#define CPUCAUSE 0x031C
+#define LBUS_ERR_ADDR 0x0320
+#define LBUS_ERR_CMD 0x0324
+#define LBUS_ERR_DATA_L 0x0328
+#define LBUS_ERR_DATA_H 0x032C
+#define LX_EXCEPTION_ADDR 0x0330
+#define WDG_CTRL 0x0334
+#define INTMTU 0x0338
+#define INTM 0x033A
+#define FDLOCKTURN0 0x033C
+#define FDLOCKTURN1 0x033D
+#define TRXPKTBUF_DBG_DATA 0x0340
+#define TRXPKTBUF_DBG_CTRL 0x0348
+#define DPLL 0x034A
+#define CBUS_ERR_ADDR 0x0350
+#define CBUS_ERR_CMD 0x0354
+#define CBUS_ERR_DATA_L 0x0358
+#define CBUS_ERR_DATA_H 0x035C
+#define USB_SIE_INTF_ADDR 0x0360
+#define USB_SIE_INTF_WD 0x0361
+#define USB_SIE_INTF_RD 0x0362
+#define USB_SIE_INTF_CTRL 0x0363
+#define LBUS_MON_ADDR 0x0364
+#define LBUS_ADDR_MASK 0x0368
+#define IOCMD_CTRL 0x0370
+#define IOCMD_DATA 0x0374
+
+/* Boundary is 0x37F */
+
+/* 14. PCIE config register */
+#define TP_POLL 0x0500
+#define PM_CTRL 0x0502
+#define PCIF 0x0503
+
+#define THPDA 0x0514
+#define TMDA 0x0518
+#define TCDA 0x051C
+#define HDA 0x0520
+#define TVODA 0x0524
+#define TVIDA 0x0528
+#define TBEDA 0x052C
+#define TBKDA 0x0530
+#define TBDA 0x0534
+#define RCDA 0x0538
+#define RDQDA 0x053C
+#define DBI_WDATA 0x0540
+#define DBI_RDATA 0x0544
+#define DBI_CTRL 0x0548
+#define MDIO_DATA 0x0550
+#define MDIO_CTRL 0x0554
+#define PCI_RPWM 0x0561
+#define PCI_CPWM 0x0563
+
+/* Config register (Offset 0x800-) */
+#define PHY_CCA 0x803
+
+/* USB Configuration */
+#define REG_USB_INFO 0xFE17
+#define REG_USB_SPECIAL_OPTION 0xFE55
+#define REG_USB_HCPWM 0xFE57
+#define REG_USB_HRPWM 0xFE58
+#define REG_USB_DMA_AGG_TO 0xFE5B
+#define REG_USB_AGG_TO 0xFE5C
+#define REG_USB_AGG_TH 0xFE5D
+
+#define REG_USB_VID 0xFE60
+#define REG_USB_PID 0xFE62
+#define REG_USB_OPTIONAL 0xFE64
+#define REG_USB_CHIRP_K 0xFE65 // REG_USB_EP
+#define REG_USB_PHY 0xFE66 // 0xFE68?
+#define REG_USB_MAC_ADDR 0xFE70
+#define REG_USB_STRING 0xFE80
+
+/* Min Spacing related settings. */
+#define MAX_MSS_DENSITY_2T 0x13
+#define MAX_MSS_DENSITY_1T 0x0A
+
+/* Rx DMA Control related settings */
+#define RXDMA_AGG_EN BIT(7)
+
+#define RPWM PCI_RPWM
+
+/* Regsiter Bit and Content definition */
+
+#define ISO_MD2PP BIT(0)
+#define ISO_PA2PCIE BIT(3)
+#define ISO_PLL2MD BIT(4)
+#define ISO_PWC_DV2RP BIT(11)
+#define ISO_PWC_RV2RP BIT(12)
+
+
+#define FEN_MREGEN BIT(15)
+#define FEN_DCORE BIT(11)
+#define FEN_CPUEN BIT(10)
+
+#define PAD_HWPD_IDN BIT(22)
+
+#define SYS_CLKSEL_80M BIT(0)
+#define SYS_PS_CLKSEL BIT(1)
+#define SYS_CPU_CLKSEL BIT(2)
+#define SYS_MAC_CLK_EN BIT(11)
+#define SYS_SWHW_SEL BIT(14)
+#define SYS_FWHW_SEL BIT(15)
+
+#define CmdEEPROM_En BIT(5)
+#define CmdEERPOMSEL BIT(4)
+#define Cmd9346CR_9356SEL BIT(4)
+
+#define AFE_MISC_I32_EN BIT(3)
+#define AFE_MBEN BIT(1)
+#define AFE_BGEN BIT(0)
+
+#define SPS1_SWEN BIT(1)
+#define SPS1_LDEN BIT(0)
+
+#define RF_EN BIT(0)
+#define RF_RSTB BIT(1)
+#define RF_SDMRSTB BIT(2)
+
+#define LDA15_EN BIT(0)
+
+#define LDV12_EN BIT(0)
+#define LDV12_SDBY BIT(1)
+
+#define XTAL_GATE_AFE BIT(10)
+
+#define APLL_EN BIT(0)
+
+#define AFR_CardBEn BIT(0)
+#define AFR_CLKRUN_SEL BIT(1)
+#define AFR_FuncRegEn BIT(2)
+
+#define APSDOFF_STATUS BIT(15)
+#define APSDOFF BIT(14)
+#define BBRSTN BIT(13)
+#define BB_GLB_RSTN BIT(12)
+#define SCHEDULE_EN BIT(10)
+#define MACRXEN BIT(9)
+#define MACTXEN BIT(8)
+#define DDMA_EN BIT(7)
+#define FW2HW_EN BIT(6)
+#define RXDMA_EN BIT(5)
+#define TXDMA_EN BIT(4)
+#define HCI_RXDMA_EN BIT(3)
+#define HCI_TXDMA_EN BIT(2)
+
+#define StopHCCA BIT(6)
+#define StopHigh BIT(5)
+#define StopMgt BIT(4)
+#define StopVO BIT(3)
+#define StopVI BIT(2)
+#define StopBE BIT(1)
+#define StopBK BIT(0)
+
+#define LBK_NORMAL 0x00
+#define LBK_MAC_LB (BIT(0) | BIT(1) | BIT(3))
+#define LBK_MAC_DLB (BIT(0) | BIT(1))
+#define LBK_DMA_LB (BIT(0) | BIT(1) | BIT(2))
+
+#define TCP_OFDL_EN BIT(25)
+#define HWPC_TX_EN BIT(24)
+#define TXDMAPRE2FULL BIT(23)
+#define DISCW BIT(20)
+#define TCRICV BIT(19)
+#define CfendForm BIT(17)
+#define TCRCRC BIT(16)
+#define FAKE_IMEM_EN BIT(15)
+#define TSFRST BIT(9)
+#define TSFEN BIT(8)
+#define FWALLRDY (BIT(0) | BIT(1) | BIT(2) | \
+ BIT(3) | BIT(4) | BIT(5) | \
+ BIT(6) | BIT(7))
+#define FWRDY BIT(7)
+#define BASECHG BIT(6)
+#define IMEM BIT(5)
+#define DMEM_CODE_DONE BIT(4)
+#define EXT_IMEM_CHK_RPT BIT(3)
+#define EXT_IMEM_CODE_DONE BIT(2)
+#define IMEM_CHK_RPT BIT(1)
+#define IMEM_CODE_DONE BIT(0)
+#define IMEM_CODE_DONE BIT(0)
+#define IMEM_CHK_RPT BIT(1)
+#define EMEM_CODE_DONE BIT(2)
+#define EMEM_CHK_RPT BIT(3)
+#define DMEM_CODE_DONE BIT(4)
+#define IMEM_RDY BIT(5)
+#define BASECHG BIT(6)
+#define FWRDY BIT(7)
+#define LOAD_FW_READY (IMEM_CODE_DONE | \
+ IMEM_CHK_RPT | \
+ EMEM_CODE_DONE | \
+ EMEM_CHK_RPT | \
+ DMEM_CODE_DONE | \
+ IMEM_RDY | \
+ BASECHG | \
+ FWRDY)
+#define TCR_TSFEN BIT(8)
+#define TCR_TSFRST BIT(9)
+#define TCR_FAKE_IMEM_EN BIT(15)
+#define TCR_CRC BIT(16)
+#define TCR_ICV BIT(19)
+#define TCR_DISCW BIT(20)
+#define TCR_HWPC_TX_EN BIT(24)
+#define TCR_TCP_OFDL_EN BIT(25)
+#define TXDMA_INIT_VALUE (IMEM_CHK_RPT | \
+ EXT_IMEM_CHK_RPT)
+
+#define RCR_APPFCS BIT(31)
+#define RCR_DIS_ENC_2BYTE BIT(30)
+#define RCR_DIS_AES_2BYTE BIT(29)
+#define RCR_HTC_LOC_CTRL BIT(28)
+#define RCR_ENMBID BIT(27)
+#define RCR_RX_TCPOFDL_EN BIT(26)
+#define RCR_APP_PHYST_RXFF BIT(25)
+#define RCR_APP_PHYST_STAFF BIT(24)
+#define RCR_CBSSID BIT(23)
+#define RCR_APWRMGT BIT(22)
+#define RCR_ADD3 BIT(21)
+#define RCR_AMF BIT(20)
+#define RCR_ACF BIT(19)
+#define RCR_ADF BIT(18)
+#define RCR_APP_MIC BIT(17)
+#define RCR_APP_ICV BIT(16)
+#define RCR_RXFTH BIT(13)
+#define RCR_AICV BIT(12)
+#define RCR_RXDESC_LK_EN BIT(11)
+#define RCR_APP_BA_SSN BIT(6)
+#define RCR_ACRC32 BIT(5)
+#define RCR_RXSHFT_EN BIT(4)
+#define RCR_AB BIT(3)
+#define RCR_AM BIT(2)
+#define RCR_APM BIT(1)
+#define RCR_AAP BIT(0)
+#define RCR_MXDMA_OFFSET 8
+#define RCR_FIFO_OFFSET 13
+
+
+#define MSR_LINK_MASK ((1 << 0) | (1 << 1))
+#define MSR_LINK_MANAGED 2
+#define MSR_LINK_NONE 0
+#define MSR_LINK_SHIFT 0
+#define MSR_LINK_ADHOC 1
+#define MSR_LINK_MASTER 3
+#define MSR_NOLINK 0x00
+#define MSR_ADHOC 0x01
+#define MSR_INFRA 0x02
+#define MSR_AP 0x03
+
+#define ENUART BIT(7)
+#define ENJTAG BIT(3)
+#define BTMODE (BIT(2) | BIT(1))
+#define ENBT BIT(0)
+
+#define ENMBID BIT(7)
+#define BCNUM (BIT(6) | BIT(5) | BIT(4))
+
+#define USTIME_EDCA 0xFF00
+#define USTIME_TSF 0x00FF
+
+#define SIFS_TRX 0xFF00
+#define SIFS_CTX 0x00FF
+
+#define ENSWBCN BIT(15)
+#define DRVERLY_TU 0x0FF0
+#define DRVERLY_US 0x000F
+#define BCN_TCFG_CW_SHIFT 8
+#define BCN_TCFG_IFS 0
+
+#define RRSR_RSC_OFFSET 21
+#define RRSR_SHORT_OFFSET 23
+#define RRSR_RSC_BW_40M 0x600000
+#define RRSR_RSC_UPSUBCHNL 0x400000
+#define RRSR_RSC_LOWSUBCHNL 0x200000
+#define RRSR_SHORT 0x800000
+#define RRSR_1M BIT(0)
+#define RRSR_2M BIT(1)
+#define RRSR_5_5M BIT(2)
+#define RRSR_11M BIT(3)
+#define RRSR_6M BIT(4)
+#define RRSR_9M BIT(5)
+#define RRSR_12M BIT(6)
+#define RRSR_18M BIT(7)
+#define RRSR_24M BIT(8)
+#define RRSR_36M BIT(9)
+#define RRSR_48M BIT(10)
+#define RRSR_54M BIT(11)
+#define RRSR_MCS0 BIT(12)
+#define RRSR_MCS1 BIT(13)
+#define RRSR_MCS2 BIT(14)
+#define RRSR_MCS3 BIT(15)
+#define RRSR_MCS4 BIT(16)
+#define RRSR_MCS5 BIT(17)
+#define RRSR_MCS6 BIT(18)
+#define RRSR_MCS7 BIT(19)
+#define BRSR_AckShortPmb BIT(23)
+
+#define RATR_1M 0x00000001
+#define RATR_2M 0x00000002
+#define RATR_55M 0x00000004
+#define RATR_11M 0x00000008
+#define RATR_6M 0x00000010
+#define RATR_9M 0x00000020
+#define RATR_12M 0x00000040
+#define RATR_18M 0x00000080
+#define RATR_24M 0x00000100
+#define RATR_36M 0x00000200
+#define RATR_48M 0x00000400
+#define RATR_54M 0x00000800
+#define RATR_MCS0 0x00001000
+#define RATR_MCS1 0x00002000
+#define RATR_MCS2 0x00004000
+#define RATR_MCS3 0x00008000
+#define RATR_MCS4 0x00010000
+#define RATR_MCS5 0x00020000
+#define RATR_MCS6 0x00040000
+#define RATR_MCS7 0x00080000
+#define RATR_MCS8 0x00100000
+#define RATR_MCS9 0x00200000
+#define RATR_MCS10 0x00400000
+#define RATR_MCS11 0x00800000
+#define RATR_MCS12 0x01000000
+#define RATR_MCS13 0x02000000
+#define RATR_MCS14 0x04000000
+#define RATR_MCS15 0x08000000
+
+#define RATE_ALL_CCK (RATR_1M | RATR_2M | \
+ RATR_55M | RATR_11M)
+#define RATE_ALL_OFDM_AG (RATR_6M | RATR_9M | \
+ RATR_12M | RATR_18M | \
+ RATR_24M | RATR_36M | \
+ RATR_48M | RATR_54M)
+#define RATE_ALL_OFDM_1SS (RATR_MCS0 | RATR_MCS1 | \
+ RATR_MCS2 | RATR_MCS3 | \
+ RATR_MCS4 | RATR_MCS5 | \
+ RATR_MCS6 | RATR_MCS7)
+#define RATE_ALL_OFDM_2SS (RATR_MCS8 | RATR_MCS9 | \
+ RATR_MCS10 | RATR_MCS11 | \
+ RATR_MCS12 | RATR_MCS13 | \
+ RATR_MCS14 | RATR_MCS15)
+
+#define AC_PARAM_TXOP_LIMIT_OFFSET 16
+#define AC_PARAM_ECW_MAX_OFFSET 12
+#define AC_PARAM_ECW_MIN_OFFSET 8
+#define AC_PARAM_AIFS_OFFSET 0
+
+#define AcmHw_HwEn BIT(0)
+#define AcmHw_BeqEn BIT(1)
+#define AcmHw_ViqEn BIT(2)
+#define AcmHw_VoqEn BIT(3)
+#define AcmHw_BeqStatus BIT(4)
+#define AcmHw_ViqStatus BIT(5)
+#define AcmHw_VoqStatus BIT(6)
+
+#define RETRY_LIMIT_SHORT_SHIFT 8
+#define RETRY_LIMIT_LONG_SHIFT 0
+
+#define NAV_UPPER_EN BIT(16)
+#define NAV_UPPER 0xFF00
+#define NAV_RTSRST 0xFF
+
+#define BW_OPMODE_20MHZ BIT(2)
+#define BW_OPMODE_5G BIT(1)
+#define BW_OPMODE_11J BIT(0)
+
+#define RXERR_RPT_RST BIT(27)
+#define RXERR_OFDM_PPDU 0
+#define RXERR_OFDM_FALSE_ALARM 1
+#define RXERR_OFDM_MPDU_OK 2
+#define RXERR_OFDM_MPDU_FAIL 3
+#define RXERR_CCK_PPDU 4
+#define RXERR_CCK_FALSE_ALARM 5
+#define RXERR_CCK_MPDU_OK 6
+#define RXERR_CCK_MPDU_FAIL 7
+#define RXERR_HT_PPDU 8
+#define RXERR_HT_FALSE_ALARM 9
+#define RXERR_HT_MPDU_TOTAL 10
+#define RXERR_HT_MPDU_OK 11
+#define RXERR_HT_MPDU_FAIL 12
+#define RXERR_RX_FULL_DROP 15
+
+#define SCR_TXUSEDK BIT(0)
+#define SCR_RXUSEDK BIT(1)
+#define SCR_TXENCENABLE BIT(2)
+#define SCR_RXENCENABLE BIT(3)
+#define SCR_SKBYA2 BIT(4)
+#define SCR_NOSKMC BIT(5)
+
+#define CAM_VALID BIT(15)
+#define CAM_NOTVALID 0x0000
+#define CAM_USEDK BIT(5)
+
+#define CAM_NONE 0x0
+#define CAM_WEP40 0x01
+#define CAM_TKIP 0x02
+#define CAM_AES 0x04
+#define CAM_WEP104 0x05
+
+#define TOTAL_CAM_ENTRY 32
+#define HALF_CAM_ENTRY 16
+
+#define CAM_WRITE BIT(16)
+#define CAM_READ 0x00000000
+#define CAM_POLLINIG BIT(31)
+
+#define WOW_PMEN BIT(0)
+#define WOW_WOMEN BIT(1)
+#define WOW_MAGIC BIT(2)
+#define WOW_UWF BIT(3)
+
+#define GPIOMUX_EN BIT(3)
+#define GPIOSEL_GPIO 0
+#define GPIOSEL_PHYDBG 1
+#define GPIOSEL_BT 2
+#define GPIOSEL_WLANDBG 3
+#define GPIOSEL_GPIO_MASK (~(BIT(0)|BIT(1)))
+
+#define HST_RDBUSY BIT(0)
+#define CPU_WTBUSY BIT(1)
+
+#define IMR8190_DISABLED 0x0
+#define IMR_CPUERR BIT(5)
+#define IMR_ATIMEND BIT(4)
+#define IMR_TBDOK BIT(3)
+#define IMR_TBDER BIT(2)
+#define IMR_BCNDMAINT8 BIT(1)
+#define IMR_BCNDMAINT7 BIT(0)
+#define IMR_BCNDMAINT6 BIT(31)
+#define IMR_BCNDMAINT5 BIT(30)
+#define IMR_BCNDMAINT4 BIT(29)
+#define IMR_BCNDMAINT3 BIT(28)
+#define IMR_BCNDMAINT2 BIT(27)
+#define IMR_BCNDMAINT1 BIT(26)
+#define IMR_BCNDOK8 BIT(25)
+#define IMR_BCNDOK7 BIT(24)
+#define IMR_BCNDOK6 BIT(23)
+#define IMR_BCNDOK5 BIT(22)
+#define IMR_BCNDOK4 BIT(21)
+#define IMR_BCNDOK3 BIT(20)
+#define IMR_BCNDOK2 BIT(19)
+#define IMR_BCNDOK1 BIT(18)
+#define IMR_TIMEOUT2 BIT(17)
+#define IMR_TIMEOUT1 BIT(16)
+#define IMR_TXFOVW BIT(15)
+#define IMR_PSTIMEOUT BIT(14)
+#define IMR_BCNINT BIT(13)
+#define IMR_RXFOVW BIT(12)
+#define IMR_RDU BIT(11)
+#define IMR_RXCMDOK BIT(10)
+#define IMR_BDOK BIT(9)
+#define IMR_HIGHDOK BIT(8)
+#define IMR_COMDOK BIT(7)
+#define IMR_MGNTDOK BIT(6)
+#define IMR_HCCADOK BIT(5)
+#define IMR_BKDOK BIT(4)
+#define IMR_BEDOK BIT(3)
+#define IMR_VIDOK BIT(2)
+#define IMR_VODOK BIT(1)
+#define IMR_ROK BIT(0)
+
+#define TPPOLL_BKQ BIT(0)
+#define TPPOLL_BEQ BIT(1)
+#define TPPOLL_VIQ BIT(2)
+#define TPPOLL_VOQ BIT(3)
+#define TPPOLL_BQ BIT(4)
+#define TPPOLL_CQ BIT(5)
+#define TPPOLL_MQ BIT(6)
+#define TPPOLL_HQ BIT(7)
+#define TPPOLL_HCCAQ BIT(8)
+#define TPPOLL_STOPBK BIT(9)
+#define TPPOLL_STOPBE BIT(10)
+#define TPPOLL_STOPVI BIT(11)
+#define TPPOLL_STOPVO BIT(12)
+#define TPPOLL_STOPMGT BIT(13)
+#define TPPOLL_STOPHIGH BIT(14)
+#define TPPOLL_STOPHCCA BIT(15)
+#define TPPOLL_SHIFT 8
+
+#define CCX_CMD_CLM_ENABLE BIT(0)
+#define CCX_CMD_NHM_ENABLE BIT(1)
+#define CCX_CMD_FUNCTION_ENABLE BIT(8)
+#define CCX_CMD_IGNORE_CCA BIT(9)
+#define CCX_CMD_IGNORE_TXON BIT(10)
+#define CCX_CLM_RESULT_READY BIT(16)
+#define CCX_NHM_RESULT_READY BIT(16)
+#define CCX_CMD_RESET 0x0
+
+/* REG_USB_SPECIAL_OPTION */
+#define USB_SPECIAL_OPTION_AGG_EN BIT(3)
+
+/* REG_USB_HRPWM */
+#define USB_PS_ALL_ON BIT(2)
+#define USB_PS_ACTIVE BIT(3)
+
+/* REG_USB_CHIRP_K / REG_USB_EP ??? */
+#define USB_EP_HQ_M 0x000f
+#define USB_EP_HQ_S 0
+#define USB_EP_NQ_M 0x00f0
+#define USB_EP_NQ_S 4
+#define USB_EP_LQ_M 0x0f00
+#define USB_EP_LQ_S 8
+
+
+#define HWSET_MAX_SIZE_92S 256
+#define EFUSE_MAX_SECTION 16
+#define EFUSE_REAL_CONTENT_LEN 512
+#define EFUSE_OOB_PROTECT_BYTES 15
+
+#define RTL8190_EEPROM_ID 0x8129
+#define EEPROM_HPON 0x02
+
+#define EEPROM_VID 0x08
+#define EEPROM_DID 0x0A
+
+#define EEPROM_USB_OPTIONAL 0x0C // (&0x18)>>2 == #ep?
+#define EEPROM_USB_PHY_PARA1 0x0D // 0x0D-0x11
+
+#define EEPROM_MAC_ADDR 0x12
+#define EEPROM_NODE_ADDRESS_BYTE_0 0x12
+
+// 0x18-0x19?
+
+#define EEPROM_VERSION 0x50
+#define EEPROM_CHANNELPLAN 0x51
+#define EEPROM_CUSTOMID 0x52
+#define EEPROM_SUBCUSTOMID 0x53
+#define EEPROM_BOARDTYPE 0x54
+
+#define EEPROM_TXPOWERBASE 0x55 // 0x55-0x66 // should be TxPwIndex
+#define EEPROM_TX_PWR_INDEX_RANGE 18
+#define EEPROM_PWDIFF 0x67
+
+#define EEPROM_THERMALMETER 0x68
+#define EEPROM_CRYSTALCAP 0x69
+//#define EEPROM_TXPOWERBASE 0x6A
+
+#define EEPROM_TSSI_A 0x6B
+#define EEPROM_TSSI_B 0x6C
+//#define EEPROM_TXPWTKMODE 0x6D
+
+#define EEPROM_TX_PWR_HT20_DIFF 0x6E // 0x6E-0x70
+#define DEFAULT_HT20_TXPWR_DIFF 2
+#define EEPROM_TX_PWR_OFDM_DIFF 0x71 // 0x71-0x72,0x82
+
+// 0x73-0x78?
+
+#define EEPROM_TXPWRGROUP 0x79 // ???
+#define EEPROM_REGULATORY 0x7A // ???
+
+//#define TX_PWR_SAFETY_CHK 0x6D
+//#define EEPROM_TXPWINDEX_CCK_24G 0x5D
+//#define EEPROM_TXPWINDEX_OFDM_24G 0x6B
+//#define EEPROM_HT2T_CH1_A 0x6c
+//#define EEPROM_HT2T_CH7_A 0x6d
+//#define EEPROM_HT2T_CH13_A 0x6e
+//#define EEPROM_HT2T_CH1_B 0x6f
+//#define EEPROM_HT2T_CH7_B 0x70
+//#define EEPROM_HT2T_CH13_B 0x71
+
+#define EEPROM_RFIND_POWERDIFF 0x7B
+#define EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF 0x3
+
+//#define EEPROM_BLUETOOTH_COEXIST 0x78
+//#define EEPROM_BLUETOOTH_TYPE 0x4f
+
+//#define EEPROM_OPTIONAL 0x78
+//#define EEPROM_WOWLAN 0x78
+
+#define EEPROM_CHANNEL_PLAN_FCC 0x0
+#define EEPROM_CHANNEL_PLAN_IC 0x1
+#define EEPROM_CHANNEL_PLAN_ETSI 0x2
+#define EEPROM_CHANNEL_PLAN_SPAIN 0x3
+#define EEPROM_CHANNEL_PLAN_FRANCE 0x4
+#define EEPROM_CHANNEL_PLAN_MKK 0x5
+#define EEPROM_CHANNEL_PLAN_MKK1 0x6
+#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7
+#define EEPROM_CHANNEL_PLAN_TELEC 0x8
+#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9
+#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA
+#define EEPROM_CHANNEL_PLAN_NCC 0xB
+#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80
+
+#define FW_DIG_DISABLE 0xfd00cc00
+#define FW_DIG_ENABLE 0xfd000000
+#define FW_DIG_HALT 0xfd000001
+#define FW_DIG_RESUME 0xfd000002
+#define FW_HIGH_PWR_DISABLE 0xfd000008
+#define FW_HIGH_PWR_ENABLE 0xfd000009
+#define FW_ADD_A2_ENTRY 0xfd000016
+#define FW_TXPWR_TRACK_ENABLE 0xfd000017
+#define FW_TXPWR_TRACK_DISABLE 0xfd000018
+#define FW_TXPWR_TRACK_THERMAL 0xfd000019
+#define FW_TXANT_SWITCH_ENABLE 0xfd000023
+#define FW_TXANT_SWITCH_DISABLE 0xfd000024
+#define FW_RA_INIT 0xfd000026
+#define FW_CTRL_DM_BY_DRIVER 0Xfd00002a
+#define FW_RA_IOT_BG_COMB 0xfd000030
+#define FW_RA_IOT_N_COMB 0xfd000031
+#define FW_RA_REFRESH 0xfd0000a0
+#define FW_RA_UPDATE_MASK 0xfd0000a2
+#define FW_RA_DISABLE 0xfd0000a4
+#define FW_RA_ACTIVE 0xfd0000a6
+#define FW_RA_DISABLE_RSSI_MASK 0xfd0000ac
+#define FW_RA_ENABLE_RSSI_MASK 0xfd0000ad
+#define FW_RA_RESET 0xfd0000af
+#define FW_DM_DISABLE 0xfd00aa00
+#define FW_IQK_ENABLE 0xf0000020
+#define FW_IQK_SUCCESS 0x0000dddd
+#define FW_IQK_FAIL 0x0000ffff
+#define FW_OP_FAILURE 0xffffffff
+#define FW_TX_FEEDBACK_NONE 0xfb000000
+#define FW_TX_FEEDBACK_DTM_ENABLE (FW_TX_FEEDBACK_NONE | 0x1)
+#define FW_TX_FEEDBACK_CCX_ENABL (FW_TX_FEEDBACK_NONE | 0x2)
+#define FW_BB_RESET_ENABLE 0xff00000d
+#define FW_BB_RESET_DISABLE 0xff00000e
+#define FW_CCA_CHK_ENABLE 0xff000011
+#define FW_CCK_RESET_CNT 0xff000013
+#define FW_LPS_ENTER 0xfe000010
+#define FW_LPS_LEAVE 0xfe000011
+#define FW_INDIRECT_READ 0xf2000000
+#define FW_INDIRECT_WRITE 0xf2000001
+#define FW_CHAN_SET 0xf3000001
+
+#define IOCMD_CLASS_BB_RF 0xF0
+#define IOCMD_BB_READ_IDX 0x00
+#define IOCMD_BB_WRITE_IDX 0x01
+#define IOCMD_RF_READ_IDX 0x02
+#define IOCMD_RF_WRITE_IDX 0x03
+
+#define RFPC 0x5F
+#define RCR_9356SEL BIT(6)
+#define TCR_LRL_OFFSET 0
+#define TCR_SRL_OFFSET 8
+#define TCR_MXDMA_OFFSET 21
+#define TCR_SAT BIT(24)
+#define RCR_MXDMA_OFFSET 8
+#define RCR_FIFO_OFFSET 13
+#define RCR_OnlyErlPkt BIT(31)
+#define CWR 0xDC
+#define RETRYCTR 0xDE
+
+#define CPU_GEN_SYSTEM_RESET 0x00000001
+
+#define CCX_COMMAND_REG 0x890
+#define CLM_PERIOD_REG 0x894
+#define NHM_PERIOD_REG 0x896
+
+#define NHM_THRESHOLD0 0x898
+#define NHM_THRESHOLD1 0x899
+#define NHM_THRESHOLD2 0x89A
+#define NHM_THRESHOLD3 0x89B
+#define NHM_THRESHOLD4 0x89C
+#define NHM_THRESHOLD5 0x89D
+#define NHM_THRESHOLD6 0x89E
+#define CLM_RESULT_REG 0x8D0
+#define NHM_RESULT_REG 0x8D4
+#define NHM_RPI_COUNTER0 0x8D8
+#define NHM_RPI_COUNTER1 0x8D9
+#define NHM_RPI_COUNTER2 0x8DA
+#define NHM_RPI_COUNTER3 0x8DB
+#define NHM_RPI_COUNTER4 0x8DC
+#define NHM_RPI_COUNTER5 0x8DD
+#define NHM_RPI_COUNTER6 0x8DE
+#define NHM_RPI_COUNTER7 0x8DF
+
+#define HAL_8192S_HW_GPIO_OFF_BIT BIT(3)
+#define HAL_8192S_HW_GPIO_OFF_MASK 0xF7
+#define HAL_8192S_HW_GPIO_WPS_BIT BIT(4)
+
+#define RPMAC_RESET 0x100
+#define RPMAC_TXSTART 0x104
+#define RPMAC_TXLEGACYSIG 0x108
+#define RPMAC_TXHTSIG1 0x10c
+#define RPMAC_TXHTSIG2 0x110
+#define RPMAC_PHYDEBUG 0x114
+#define RPMAC_TXPACKETNNM 0x118
+#define RPMAC_TXIDLE 0x11c
+#define RPMAC_TXMACHEADER0 0x120
+#define RPMAC_TXMACHEADER1 0x124
+#define RPMAC_TXMACHEADER2 0x128
+#define RPMAC_TXMACHEADER3 0x12c
+#define RPMAC_TXMACHEADER4 0x130
+#define RPMAC_TXMACHEADER5 0x134
+#define RPMAC_TXDATATYPE 0x138
+#define RPMAC_TXRANDOMSEED 0x13c
+#define RPMAC_CCKPLCPPREAMBLE 0x140
+#define RPMAC_CCKPLCPHEADER 0x144
+#define RPMAC_CCKCRC16 0x148
+#define RPMAC_OFDMRXCRC32OK 0x170
+#define RPMAC_OFDMRXCRC32ER 0x174
+#define RPMAC_OFDMRXPARITYER 0x178
+#define RPMAC_OFDMRXCRC8ER 0x17c
+#define RPMAC_CCKCRXRC16ER 0x180
+#define RPMAC_CCKCRXRC32ER 0x184
+#define RPMAC_CCKCRXRC32OK 0x188
+#define RPMAC_TXSTATUS 0x18c
+
+#define RF_BB_CMD_ADDR 0x02c0
+#define RF_BB_CMD_DATA 0x02c4
+
+#define RFPGA0_RFMOD 0x800
+
+#define RFPGA0_TXINFO 0x804
+#define RFPGA0_PSDFUNCTION 0x808
+
+#define RFPGA0_TXGAINSTAGE 0x80c
+
+#define RFPGA0_RFTIMING1 0x810
+#define RFPGA0_RFTIMING2 0x814
+#define RFPGA0_XA_HSSIPARAMETER1 0x820
+#define RFPGA0_XA_HSSIPARAMETER2 0x824
+#define RFPGA0_XB_HSSIPARAMETER1 0x828
+#define RFPGA0_XB_HSSIPARAMETER2 0x82c
+#define RFPGA0_XC_HSSIPARAMETER1 0x830
+#define RFPGA0_XC_HSSIPARAMETER2 0x834
+#define RFPGA0_XD_HSSIPARAMETER1 0x838
+#define RFPGA0_XD_HSSIPARAMETER2 0x83c
+#define RFPGA0_XA_LSSIPARAMETER 0x840
+#define RFPGA0_XB_LSSIPARAMETER 0x844
+#define RFPGA0_XC_LSSIPARAMETER 0x848
+#define RFPGA0_XD_LSSIPARAMETER 0x84c
+
+#define RFPGA0_RFWAKEUP_PARAMETER 0x850
+#define RFPGA0_RFSLEEPUP_PARAMETER 0x854
+
+#define RFPGA0_XAB_SWITCHCONTROL 0x858
+#define RFPGA0_XCD_SWITCHCONTROL 0x85c
+
+#define RFPGA0_XA_RFINTERFACEOE 0x860
+#define RFPGA0_XB_RFINTERFACEOE 0x864
+#define RFPGA0_XC_RFINTERFACEOE 0x868
+#define RFPGA0_XD_RFINTERFACEOE 0x86c
+
+#define RFPGA0_XAB_RFINTERFACESW 0x870
+#define RFPGA0_XCD_RFINTERFACESW 0x874
+
+#define RFPGA0_XAB_RFPARAMETER 0x878
+#define RFPGA0_XCD_RFPARAMETER 0x87c
+
+#define RFPGA0_ANALOGPARAMETER1 0x880
+#define RFPGA0_ANALOGPARAMETER2 0x884
+#define RFPGA0_ANALOGPARAMETER3 0x888
+#define RFPGA0_ANALOGPARAMETER4 0x88c
+
+#define RFPGA0_XA_LSSIREADBACK 0x8a0
+#define RFPGA0_XB_LSSIREADBACK 0x8a4
+#define RFPGA0_XC_LSSIREADBACK 0x8a8
+#define RFPGA0_XD_LSSIREADBACK 0x8ac
+
+#define RFPGA0_PSDREPORT 0x8b4
+#define TRANSCEIVERA_HSPI_READBACK 0x8b8
+#define TRANSCEIVERB_HSPI_READBACK 0x8bc
+#define RFPGA0_XAB_RFINTERFACERB 0x8e0
+#define RFPGA0_XCD_RFINTERFACERB 0x8e4
+#define RFPGA1_RFMOD 0x900
+
+#define RFPGA1_TXBLOCK 0x904
+#define RFPGA1_DEBUGSELECT 0x908
+#define RFPGA1_TXINFO 0x90c
+
+#define RCCK0_SYSTEM 0xa00
+
+#define RCCK0_AFESETTING 0xa04
+#define RCCK0_CCA 0xa08
+
+#define RCCK0_RXAGC1 0xa0c
+#define RCCK0_RXAGC2 0xa10
+
+#define RCCK0_RXHP 0xa14
+
+#define RCCK0_DSPPARAMETER1 0xa18
+#define RCCK0_DSPPARAMETER2 0xa1c
+
+#define RCCK0_TXFILTER1 0xa20
+#define RCCK0_TXFILTER2 0xa24
+#define RCCK0_DEBUGPORT 0xa28
+#define RCCK0_FALSEALARMREPORT 0xa2c
+#define RCCK0_TRSSIREPORT 0xa50
+#define RCCK0_RXREPORT 0xa54
+#define RCCK0_FACOUNTERLOWER 0xa5c
+#define RCCK0_FACOUNTERUPPER 0xa58
+
+#define ROFDM0_LSTF 0xc00
+
+#define ROFDM0_TRXPATHENABLE 0xc04
+#define ROFDM0_TRMUXPAR 0xc08
+#define ROFDM0_TRSWISOLATION 0xc0c
+
+#define ROFDM0_XARXAFE 0xc10
+#define ROFDM0_XARXIQIMBALANCE 0xc14
+#define ROFDM0_XBRXAFE 0xc18
+#define ROFDM0_XBRXIQIMBALANCE 0xc1c
+#define ROFDM0_XCRXAFE 0xc20
+#define ROFDM0_XCRXIQIMBALANCE 0xc24
+#define ROFDM0_XDRXAFE 0xc28
+#define ROFDM0_XDRXIQIMBALANCE 0xc2c
+
+#define ROFDM0_RXDETECTOR1 0xc30
+#define ROFDM0_RXDETECTOR2 0xc34
+#define ROFDM0_RXDETECTOR3 0xc38
+#define ROFDM0_RXDETECTOR4 0xc3c
+
+#define ROFDM0_RXDSP 0xc40
+#define ROFDM0_CFO_AND_DAGC 0xc44
+#define ROFDM0_CCADROP_THRESHOLD 0xc48
+#define ROFDM0_ECCA_THRESHOLD 0xc4c
+
+#define ROFDM0_XAAGCCORE1 0xc50
+#define ROFDM0_XAAGCCORE2 0xc54
+#define ROFDM0_XBAGCCORE1 0xc58
+#define ROFDM0_XBAGCCORE2 0xc5c
+#define ROFDM0_XCAGCCORE1 0xc60
+#define ROFDM0_XCAGCCORE2 0xc64
+#define ROFDM0_XDAGCCORE1 0xc68
+#define ROFDM0_XDAGCCORE2 0xc6c
+
+#define ROFDM0_AGCPARAMETER1 0xc70
+#define ROFDM0_AGCPARAMETER2 0xc74
+#define ROFDM0_AGCRSSITABLE 0xc78
+#define ROFDM0_HTSTFAGC 0xc7c
+
+#define ROFDM0_XATXIQIMBALANCE 0xc80
+#define ROFDM0_XATXAFE 0xc84
+#define ROFDM0_XBTXIQIMBALANCE 0xc88
+#define ROFDM0_XBTXAFE 0xc8c
+#define ROFDM0_XCTXIQIMBALANCE 0xc90
+#define ROFDM0_XCTXAFE 0xc94
+#define ROFDM0_XDTXIQIMBALANCE 0xc98
+#define ROFDM0_XDTXAFE 0xc9c
+
+#define ROFDM0_RXHP_PARAMETER 0xce0
+#define ROFDM0_TXPSEUDO_NOISE_WGT 0xce4
+#define ROFDM0_FRAME_SYNC 0xcf0
+#define ROFDM0_DFSREPORT 0xcf4
+#define ROFDM0_TXCOEFF1 0xca4
+#define ROFDM0_TXCOEFF2 0xca8
+#define ROFDM0_TXCOEFF3 0xcac
+#define ROFDM0_TXCOEFF4 0xcb0
+#define ROFDM0_TXCOEFF5 0xcb4
+#define ROFDM0_TXCOEFF6 0xcb8
+
+
+#define ROFDM1_LSTF 0xd00
+#define ROFDM1_TRXPATHENABLE 0xd04
+
+#define ROFDM1_CFO 0xd08
+#define ROFDM1_CSI1 0xd10
+#define ROFDM1_SBD 0xd14
+#define ROFDM1_CSI2 0xd18
+#define ROFDM1_CFOTRACKING 0xd2c
+#define ROFDM1_TRXMESAURE1 0xd34
+#define ROFDM1_INTF_DET 0xd3c
+#define ROFDM1_PSEUDO_NOISESTATEAB 0xd50
+#define ROFDM1_PSEUDO_NOISESTATECD 0xd54
+#define ROFDM1_RX_PSEUDO_NOISE_WGT 0xd58
+
+#define ROFDM_PHYCOUNTER1 0xda0
+#define ROFDM_PHYCOUNTER2 0xda4
+#define ROFDM_PHYCOUNTER3 0xda8
+
+#define ROFDM_SHORT_CFOAB 0xdac
+#define ROFDM_SHORT_CFOCD 0xdb0
+#define ROFDM_LONG_CFOAB 0xdb4
+#define ROFDM_LONG_CFOCD 0xdb8
+#define ROFDM_TAIL_CFOAB 0xdbc
+#define ROFDM_TAIL_CFOCD 0xdc0
+#define ROFDM_PW_MEASURE1 0xdc4
+#define ROFDM_PW_MEASURE2 0xdc8
+#define ROFDM_BW_REPORT 0xdcc
+#define ROFDM_AGC_REPORT 0xdd0
+#define ROFDM_RXSNR 0xdd4
+#define ROFDM_RXEVMCSI 0xdd8
+#define ROFDM_SIG_REPORT 0xddc
+
+
+#define RTXAGC_RATE18_06 0xe00
+#define RTXAGC_RATE54_24 0xe04
+#define RTXAGC_CCK_MCS32 0xe08
+#define RTXAGC_MCS03_MCS00 0xe10
+#define RTXAGC_MCS07_MCS04 0xe14
+#define RTXAGC_MCS11_MCS08 0xe18
+#define RTXAGC_MCS15_MCS12 0xe1c
+
+
+#define RF_AC 0x00
+#define RF_IQADJ_G1 0x01
+#define RF_IQADJ_G2 0x02
+#define RF_POW_TRSW 0x05
+#define RF_GAIN_RX 0x06
+#define RF_GAIN_TX 0x07
+#define RF_TXM_IDAC 0x08
+#define RF_BS_IQGEN 0x0F
+
+#define RF_MODE1 0x10
+#define RF_MODE2 0x11
+#define RF_RX_AGC_HP 0x12
+#define RF_TX_AGC 0x13
+#define RF_BIAS 0x14
+#define RF_IPA 0x15
+#define RF_POW_ABILITY 0x17
+#define RF_MODE_AG 0x18
+#define RF_CHANNEL 0x18
+#define RF_CHNLBW 0x18
+#define RF_TOP 0x19
+#define RF_RX_G1 0x1A
+#define RF_RX_G2 0x1B
+#define RF_RX_BB2 0x1C
+#define RF_RX_BB1 0x1D
+#define RF_RCK1 0x1E
+#define RF_RCK2 0x1F
+
+#define RF_TX_G1 0x20
+#define RF_TX_G2 0x21
+#define RF_TX_G3 0x22
+#define RF_TX_BB1 0x23
+#define RF_T_METER 0x24
+#define RF_SYN_G1 0x25
+#define RF_SYN_G2 0x26
+#define RF_SYN_G3 0x27
+#define RF_SYN_G4 0x28
+#define RF_SYN_G5 0x29
+#define RF_SYN_G6 0x2A
+#define RF_SYN_G7 0x2B
+#define RF_SYN_G8 0x2C
+
+#define RF_RCK_OS 0x30
+#define RF_TXPA_G1 0x31
+#define RF_TXPA_G2 0x32
+#define RF_TXPA_G3 0x33
+
+#define BRFMOD 0x1
+#define BCCKEN 0x1000000
+#define BOFDMEN 0x2000000
+
+#define BXBTXAGC 0xf00
+#define BXCTXAGC 0xf000
+#define BXDTXAGC 0xf0000
+
+#define B3WIRE_DATALENGTH 0x800
+#define B3WIRE_ADDRESSLENGTH 0x400
+
+#define BRFSI_RFENV 0x10
+
+#define BLSSI_READADDRESS 0x7f800000
+#define BLSSI_READEDGE 0x80000000
+#define BLSSI_READBACK_DATA 0xfffff
+
+#define BADCLKPHASE 0x4000000
+
+#define BCCK_SIDEBAND 0x10
+
+#define BTX_AGCRATECCK 0x7f00
+
+#define MASKBYTE0 0xff
+#define MASKBYTE1 0xff00
+#define MASKBYTE2 0xff0000
+#define MASKBYTE3 0xff000000
+#define MASKHWORD 0xffff0000
+#define MASKLWORD 0x0000ffff
+#define MASKDWORD 0xffffffff
+
+#define MAKS12BITS 0xfffff
+#define MASK20BITS 0xfffff
+#define RFREG_OFFSET_MASK 0xfffff
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/rf.c b/drivers/net/wireless/rtlwifi/rtl8192su/rf.c
new file mode 100644
index 0000000..3fa351d
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/rf.c
@@ -0,0 +1,542 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+
+
+static void _rtl92s_get_powerbase(struct ieee80211_hw *hw, u8 *p_pwrlevel,
+ u8 chnl, u32 *ofdmbase, u32 *mcsbase,
+ u8 *p_final_pwridx)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 pwrbase0, pwrbase1;
+ u8 legacy_pwrdiff = 0, ht20_pwrdiff = 0;
+ u8 i, pwrlevel[4];
+
+ for (i = 0; i < 2; i++)
+ pwrlevel[i] = p_pwrlevel[i];
+
+ /* We only care about the path A for legacy. */
+ if (rtlefuse->eeprom_version < 2) {
+ pwrbase0 = pwrlevel[0] + (rtlefuse->legacy_httxpowerdiff & 0xf);
+ } else if (rtlefuse->eeprom_version >= 2) {
+ legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff
+ [RF90_PATH_A][chnl - 1];
+
+ /* For legacy OFDM, tx pwr always > HT OFDM pwr.
+ * We do not care Path B
+ * legacy OFDM pwr diff. NO BB register
+ * to notify HW. */
+ pwrbase0 = pwrlevel[0] + legacy_pwrdiff;
+ }
+
+ pwrbase0 = (pwrbase0 << 24) | (pwrbase0 << 16) | (pwrbase0 << 8) |
+ pwrbase0;
+ *ofdmbase = pwrbase0;
+
+ /* MCS rates */
+ if (rtlefuse->eeprom_version >= 2) {
+ /* Check HT20 to HT40 diff */
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
+ for (i = 0; i < 2; i++) {
+ /* rf-A, rf-B */
+ /* HT 20<->40 pwr diff */
+ ht20_pwrdiff = rtlefuse->txpwr_ht20diff
+ [i][chnl - 1];
+
+ if (ht20_pwrdiff < 8) /* 0~+7 */
+ pwrlevel[i] += ht20_pwrdiff;
+ else /* index8-15=-8~-1 */
+ pwrlevel[i] -= (16 - ht20_pwrdiff);
+ }
+ }
+ }
+
+ /* use index of rf-A */
+ pwrbase1 = pwrlevel[0];
+ pwrbase1 = (pwrbase1 << 24) | (pwrbase1 << 16) | (pwrbase1 << 8) |
+ pwrbase1;
+ *mcsbase = pwrbase1;
+
+ /* The following is for Antenna
+ * diff from Ant-B to Ant-A */
+ p_final_pwridx[0] = pwrlevel[0];
+ p_final_pwridx[1] = pwrlevel[1];
+
+ switch (rtlefuse->eeprom_regulatory) {
+ case 3:
+ /* The following is for calculation
+ * of the power diff for Ant-B to Ant-A. */
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ p_final_pwridx[0] += rtlefuse->pwrgroup_ht40
+ [RF90_PATH_A][
+ chnl - 1];
+ p_final_pwridx[1] += rtlefuse->pwrgroup_ht40
+ [RF90_PATH_B][
+ chnl - 1];
+ } else {
+ p_final_pwridx[0] += rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][
+ chnl - 1];
+ p_final_pwridx[1] += rtlefuse->pwrgroup_ht20
+ [RF90_PATH_B][
+ chnl - 1];
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "40MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
+ p_final_pwridx[0], p_final_pwridx[1]);
+ } else {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "20MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
+ p_final_pwridx[0], p_final_pwridx[1]);
+ }
+}
+
+static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
+ u8 *p_final_pwridx)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ char ant_pwr_diff = 0;
+ u32 u4reg_val = 0;
+
+ if (rtlphy->rf_type == RF_2T2R) {
+ ant_pwr_diff = p_final_pwridx[1] - p_final_pwridx[0];
+
+ /* range is from 7~-8,
+ * index = 0x0~0xf */
+ if (ant_pwr_diff > 7)
+ ant_pwr_diff = 7;
+ if (ant_pwr_diff < -8)
+ ant_pwr_diff = -8;
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "Antenna Diff from RF-B to RF-A = %d (0x%x)\n",
+ ant_pwr_diff, ant_pwr_diff & 0xf);
+
+ ant_pwr_diff &= 0xf;
+ }
+
+ /* Antenna TX power difference */
+ rtlefuse->antenna_txpwdiff[2] = 0;/* RF-D, don't care */
+ rtlefuse->antenna_txpwdiff[1] = 0;/* RF-C, don't care */
+ rtlefuse->antenna_txpwdiff[0] = (u8)(ant_pwr_diff); /* RF-B */
+
+ u4reg_val = rtlefuse->antenna_txpwdiff[2] << 8 |
+ rtlefuse->antenna_txpwdiff[1] << 4 |
+ rtlefuse->antenna_txpwdiff[0];
+
+ rtl_set_bbreg(hw, RFPGA0_TXGAINSTAGE, (BXBTXAGC | BXCTXAGC | BXDTXAGC),
+ u4reg_val);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "Write BCD-Diff(0x%x) = 0x%x\n",
+ RFPGA0_TXGAINSTAGE, u4reg_val);
+}
+
+static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
+ u8 chnl, u8 index,
+ u32 pwrbase0,
+ u32 pwrbase1,
+ u32 *p_outwrite_val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 i, chnlgroup, pwrdiff_limit[4];
+ u32 writeval, customer_limit;
+
+ /* Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate */
+ switch (rtlefuse->eeprom_regulatory) {
+ case 0:
+ /* Realtek better performance increase power diff
+ * defined by Realtek for large power */
+ chnlgroup = 0;
+
+ writeval = rtlphy->mcs_txpwrlevel_origoffset
+ [chnlgroup][index] +
+ ((index < 2) ? pwrbase0 : pwrbase1);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "RTK better performance, writeval = 0x%x\n", writeval);
+ break;
+ case 1:
+ /* Realtek regulatory increase power diff defined
+ * by Realtek for regulatory */
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ writeval = ((index < 2) ? pwrbase0 : pwrbase1);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "Realtek regulatory, 40MHz, writeval = 0x%x\n",
+ writeval);
+ } else {
+ if (rtlphy->pwrgroup_cnt == 1)
+ chnlgroup = 0;
+
+ if (rtlphy->pwrgroup_cnt >= 3) {
+ if (chnl <= 3)
+ chnlgroup = 0;
+ else if (chnl >= 4 && chnl <= 8)
+ chnlgroup = 1;
+ else if (chnl > 8)
+ chnlgroup = 2;
+ if (rtlphy->pwrgroup_cnt == 4)
+ chnlgroup++;
+ }
+
+ writeval = rtlphy->mcs_txpwrlevel_origoffset
+ [chnlgroup][index]
+ + ((index < 2) ?
+ pwrbase0 : pwrbase1);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "Realtek regulatory, 20MHz, writeval = 0x%x\n",
+ writeval);
+ }
+ break;
+ case 2:
+ /* Better regulatory don't increase any power diff */
+ writeval = ((index < 2) ? pwrbase0 : pwrbase1);
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "Better regulatory, writeval = 0x%x\n", writeval);
+ break;
+ case 3:
+ /* Customer defined power diff. increase power diff
+ defined by customer. */
+ chnlgroup = 0;
+
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "customer's limit, 40MHz = 0x%x\n",
+ rtlefuse->pwrgroup_ht40
+ [RF90_PATH_A][chnl - 1]);
+ } else {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "customer's limit, 20MHz = 0x%x\n",
+ rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][chnl - 1]);
+ }
+
+ for (i = 0; i < 4; i++) {
+ pwrdiff_limit[i] =
+ (u8)((rtlphy->mcs_txpwrlevel_origoffset
+ [chnlgroup][index] & (0x7f << (i * 8)))
+ >> (i * 8));
+
+ if (rtlphy->current_chan_bw ==
+ HT_CHANNEL_WIDTH_20_40) {
+ if (pwrdiff_limit[i] >
+ rtlefuse->pwrgroup_ht40
+ [RF90_PATH_A][chnl - 1]) {
+ pwrdiff_limit[i] =
+ rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][chnl - 1];
+ }
+ } else {
+ if (pwrdiff_limit[i] >
+ rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][chnl - 1]) {
+ pwrdiff_limit[i] =
+ rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][chnl - 1];
+ }
+ }
+ }
+
+ customer_limit = (pwrdiff_limit[3] << 24) |
+ (pwrdiff_limit[2] << 16) |
+ (pwrdiff_limit[1] << 8) |
+ (pwrdiff_limit[0]);
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "Customer's limit = 0x%x\n", customer_limit);
+
+ writeval = customer_limit + ((index < 2) ?
+ pwrbase0 : pwrbase1);
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "Customer, writeval = 0x%x\n", writeval);
+ break;
+ default:
+ chnlgroup = 0;
+ writeval = rtlphy->mcs_txpwrlevel_origoffset[chnlgroup][index] +
+ ((index < 2) ? pwrbase0 : pwrbase1);
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ "RTK better performance, writeval = 0x%x\n", writeval);
+ break;
+ }
+
+ if (rtlpriv->dm.dynamic_txhighpower_lvl == TX_HIGH_PWR_LEVEL_LEVEL1)
+ writeval = 0x10101010;
+ else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TX_HIGH_PWR_LEVEL_LEVEL2)
+ writeval = 0x0;
+
+ *p_outwrite_val = writeval;
+
+}
+
+static void _rtl92s_write_ofdm_powerreg(struct ieee80211_hw *hw,
+ u8 index, u32 val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u16 regoffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
+ u8 i, rfa_pwr[4];
+ u8 rfa_lower_bound = 0, rfa_upper_bound = 0, rf_pwr_diff = 0;
+ u32 writeval = val;
+
+ /* If path A and Path B coexist, we must limit Path A tx power.
+ * Protect Path B pwr over or under flow. We need to calculate
+ * upper and lower bound of path A tx power. */
+ if (rtlphy->rf_type == RF_2T2R) {
+ rf_pwr_diff = rtlefuse->antenna_txpwdiff[0];
+
+ /* Diff=-8~-1 */
+ if (rf_pwr_diff >= 8) {
+ /* Prevent underflow!! */
+ rfa_lower_bound = 0x10 - rf_pwr_diff;
+ /* if (rf_pwr_diff >= 0) Diff = 0-7 */
+ } else {
+ rfa_upper_bound = RF6052_MAX_TX_PWR - rf_pwr_diff;
+ }
+ }
+
+ for (i = 0; i < 4; i++) {
+ rfa_pwr[i] = (u8)((writeval & (0x7f << (i * 8))) >> (i * 8));
+ if (rfa_pwr[i] > RF6052_MAX_TX_PWR)
+ rfa_pwr[i] = RF6052_MAX_TX_PWR;
+
+ /* If path A and Path B coexist, we must limit Path A tx power.
+ * Protect Path B pwr over or under flow. We need to calculate
+ * upper and lower bound of path A tx power. */
+ if (rtlphy->rf_type == RF_2T2R) {
+ /* Diff=-8~-1 */
+ if (rf_pwr_diff >= 8) {
+ /* Prevent underflow!! */
+ if (rfa_pwr[i] < rfa_lower_bound)
+ rfa_pwr[i] = rfa_lower_bound;
+ /* Diff = 0-7 */
+ } else if (rf_pwr_diff >= 1) {
+ /* Prevent overflow */
+ if (rfa_pwr[i] > rfa_upper_bound)
+ rfa_pwr[i] = rfa_upper_bound;
+ }
+ }
+
+ }
+
+ writeval = (rfa_pwr[3] << 24) | (rfa_pwr[2] << 16) | (rfa_pwr[1] << 8) |
+ rfa_pwr[0];
+
+ rtl_set_bbreg(hw, regoffset[index], 0x7f7f7f7f, writeval);
+}
+
+void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw,
+ u8 *p_pwrlevel, u8 chnl)
+{
+ u32 writeval, pwrbase0, pwrbase1;
+ u8 index = 0;
+ u8 finalpwr_idx[4];
+
+ _rtl92s_get_powerbase(hw, p_pwrlevel, chnl, &pwrbase0, &pwrbase1,
+ &finalpwr_idx[0]);
+ _rtl92s_set_antennadiff(hw, &finalpwr_idx[0]);
+
+ for (index = 0; index < 6; index++) {
+ _rtl92s_get_txpower_writeval_byregulatory(hw, chnl, index,
+ pwrbase0, pwrbase1, &writeval);
+
+ _rtl92s_write_ofdm_powerreg(hw, index, writeval);
+ }
+}
+
+void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw, u8 pwrlevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 txagc = 0;
+ bool dont_inc_cck_or_turboscanoff = false;
+
+// if (((rtlefuse->eeprom_version >= 2) &&
+// (rtlefuse->txpwr_safetyflag == 1)) ||
+ if ((rtlefuse->eeprom_version >= 2) ||
+ ((rtlefuse->eeprom_version >= 2) &&
+ (rtlefuse->eeprom_regulatory != 0)))
+ dont_inc_cck_or_turboscanoff = true;
+
+ if (mac->act_scanning) {
+ txagc = 0x3f;
+ if (dont_inc_cck_or_turboscanoff)
+ txagc = pwrlevel;
+ } else {
+ txagc = pwrlevel;
+
+ if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TX_HIGH_PWR_LEVEL_LEVEL1)
+ txagc = 0x10;
+ else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TX_HIGH_PWR_LEVEL_LEVEL2)
+ txagc = 0x0;
+ }
+
+ if (txagc > RF6052_MAX_TX_PWR)
+ txagc = RF6052_MAX_TX_PWR;
+
+ rtl_set_bbreg(hw, RTXAGC_CCK_MCS32, BTX_AGCRATECCK, txagc);
+
+}
+
+bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 u4reg_val = 0;
+ u8 rfpath;
+ bool rtstatus = true;
+ struct bb_reg_def *pphyreg;
+
+ // XXX
+ return true;
+
+ /* Initialize RF */
+ for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+
+ pphyreg = &rtlphy->phyreg_def[rfpath];
+
+ /* Store original RFENV control type */
+ switch (rfpath) {
+ case RF90_PATH_A:
+ case RF90_PATH_C:
+ u4reg_val = rtl92s_phy_query_bb_reg(hw,
+ pphyreg->rfintfs,
+ BRFSI_RFENV);
+ break;
+ case RF90_PATH_B:
+ case RF90_PATH_D:
+ u4reg_val = rtl92s_phy_query_bb_reg(hw,
+ pphyreg->rfintfs,
+ BRFSI_RFENV << 16);
+ break;
+ }
+
+ /* Set RF_ENV enable */
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfe,
+ BRFSI_RFENV << 16, 0x1);
+
+ /* Set RF_ENV output high */
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+
+ /* Set bit number of Address and Data for RF register */
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
+ B3WIRE_ADDRESSLENGTH, 0x0);
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
+ B3WIRE_DATALENGTH, 0x0);
+
+ /* Initialize RF fom connfiguration file */
+ switch (rfpath) {
+ case RF90_PATH_A:
+ rtstatus = rtl92s_phy_config_rf(hw,
+ (enum radio_path)rfpath);
+ break;
+ case RF90_PATH_B:
+ rtstatus = rtl92s_phy_config_rf(hw,
+ (enum radio_path)rfpath);
+ break;
+ case RF90_PATH_C:
+ break;
+ case RF90_PATH_D:
+ break;
+ }
+
+ /* Restore RFENV control type */
+ switch (rfpath) {
+ case RF90_PATH_A:
+ case RF90_PATH_C:
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs, BRFSI_RFENV,
+ u4reg_val);
+ break;
+ case RF90_PATH_B:
+ case RF90_PATH_D:
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV << 16,
+ u4reg_val);
+ break;
+ }
+
+ if (!rtstatus) {
+ pr_err("Radio[%d] Fail!!\n", rfpath);
+ goto fail;
+ }
+
+ }
+
+ return rtstatus;
+
+fail:
+ return rtstatus;
+}
+
+void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ switch (bandwidth) {
+ case HT_CHANNEL_WIDTH_20:
+ rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+ 0xfffff3ff) | 0x0400);
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[0]);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+ 0xfffff3ff));
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[0]);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "unknown bandwidth: %#X\n", bandwidth);
+ break;
+ }
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/rf.h b/drivers/net/wireless/rtlwifi/rtl8192su/rf.h
new file mode 100644
index 0000000..bf4c34a
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/rf.h
@@ -0,0 +1,42 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+#ifndef __INC_RTL92S_RF_H
+#define __INC_RTL92S_RF_H
+
+#define RF6052_MAX_TX_PWR 0x3F
+
+void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
+ u8 bandwidth);
+bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw) ;
+void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw,
+ u8 powerlevel);
+void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw,
+ u8 *p_pwrlevel, u8 chnl);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/sw.c b/drivers/net/wireless/rtlwifi/rtl8192su/sw.c
new file mode 100644
index 0000000..45d63a6
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/sw.c
@@ -0,0 +1,546 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ * Joshua Roys <Joshua.Roys@xxxxxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../core.h"
+#include "../usb.h"
+#include "../base.h"
+#include "../efuse.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "hw.h"
+#include "sw.h"
+#include "trx.h"
+#include "led.h"
+
+#include <linux/module.h>
+
+MODULE_AUTHOR("lizhaoming <chaoming_li@xxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Realtek WlanFAE <wlanfae@xxxxxxxxxxx>");
+MODULE_AUTHOR("Larry Finger <Larry.Finger@xxxxxxxxxxxx>");
+MODULE_AUTHOR("Joshua Roys <Joshua.Roys@xxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 8192S/8191S 802.11n USB wireless");
+MODULE_FIRMWARE("rtlwifi/rtl8712u.bin");
+
+static void rtl92su_fw_cb(const struct firmware *firmware, void *context)
+{
+ struct ieee80211_hw *hw = context;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rt_firmware *pfirmware = NULL;
+ //int err;
+
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
+ "Firmware callback routine entered!\n");
+ complete(&rtlpriv->firmware_loading_complete);
+ if (!firmware) {
+ pr_err("Firmware %s not available\n", rtlpriv->cfg->fw_name);
+ rtlpriv->max_fw_size = 0;
+ return;
+ }
+ if (firmware->size > rtlpriv->max_fw_size) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Firmware is too big!\n");
+ rtlpriv->max_fw_size = 0;
+ release_firmware(firmware);
+ return;
+ }
+ pfirmware = (struct rt_firmware *)rtlpriv->rtlhal.pfirmware;
+ memcpy(pfirmware->sz_fw_tmpbuffer, firmware->data, firmware->size);
+ pfirmware->sz_fw_tmpbufferlen = firmware->size;
+ release_firmware(firmware);
+
+ //rtlusb->irq_enabled = 1;
+ set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
+
+ /*init rfkill */
+ //rtl_init_rfkill(hw);
+}
+
+static void rtl92su_modify_ieee80211_ops(struct ieee80211_ops *ops)
+{
+ ops->hw_scan = rtl92s_set_fw_sitesurvey_cmd;
+}
+
+static int rtl92su_init_sw_vars(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+ int err = 0;
+ u16 earlyrxthreshold = 7;
+
+ hw->wiphy->max_scan_ssids = 1;
+
+ rtlpriv->dm.dm_initialgain_enable = true;
+ rtlpriv->dm.dm_flag = 0;
+ rtlpriv->dm.disable_framebursting = false;
+ rtlpriv->dm.thermalvalue = 0;
+ rtlpriv->dm.useramask = true;
+ //rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
+ rtlpriv->dbg.global_debuglevel = DBG_TRACE;
+
+ /* compatible 5G band 91su just 2.4G band & smsp */
+ rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
+ rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
+ rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
+
+ mac->rx_conf =
+ RCR_APPFCS |
+ RCR_APWRMGT |
+ /*RCR_ADD3 |*/
+ RCR_AMF |
+ RCR_ADF |
+ RCR_APP_MIC |
+ RCR_APP_ICV |
+ RCR_AICV |
+ /* Accept ICV error, CRC32 Error */
+ RCR_ACRC32 |
+ RCR_AB |
+ /* Accept Broadcast, Multicast */
+ RCR_AM |
+ /* Accept Physical match */
+ RCR_APM |
+ /* Accept Destination Address packets */
+ /*RCR_AAP |*/
+ RCR_APP_PHYST_STAFF |
+ /* Accept PHY status */
+ RCR_APP_PHYST_RXFF |
+ RCR_RX_TCPOFDL_EN |
+ (earlyrxthreshold << RCR_FIFO_OFFSET);
+
+ rtlusb->irq_mask[0] = (u32)
+ (IMR_ROK |
+ IMR_VODOK |
+ IMR_VIDOK |
+ IMR_BEDOK |
+ IMR_BKDOK |
+ IMR_HCCADOK |
+ IMR_MGNTDOK |
+ IMR_COMDOK |
+ IMR_HIGHDOK |
+ IMR_BDOK |
+ IMR_RXCMDOK |
+ /*IMR_TIMEOUT0 |*/
+ IMR_RDU |
+ IMR_RXFOVW |
+ IMR_BCNINT
+ /*| IMR_TXFOVW*/
+ /*| IMR_TBDOK |
+ IMR_TBDER*/);
+
+ rtlusb->irq_mask[1] = (u32) 0;
+
+ /* for LPS & IPS */
+ rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
+ rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
+ rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
+ if (!rtlpriv->psc.inactiveps)
+ pr_info("Power Save off (module option)\n");
+ if (!rtlpriv->psc.fwctrl_lps)
+ pr_info("FW Power Save off (module option)\n");
+ rtlpriv->psc.reg_fwctrl_lps = 3;
+ rtlpriv->psc.reg_max_lps_awakeintvl = 5;
+
+ if (rtlpriv->psc.reg_fwctrl_lps == 1)
+ rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
+ else if (rtlpriv->psc.reg_fwctrl_lps == 2)
+ rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
+ else if (rtlpriv->psc.reg_fwctrl_lps == 3)
+ rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
+
+ /* for firmware buf */
+ rtlpriv->rtlhal.pfirmware = vzalloc(sizeof(struct rt_firmware));
+ if (!rtlpriv->rtlhal.pfirmware)
+ return 1;
+
+ rtlpriv->max_fw_size = RTL8192_MAX_RAW_FIRMWARE_CODE_SIZE;
+
+ pr_info("Driver for Realtek RTL8192SU/RTL8191SU/RTL8188SU\n"
+ "Loading firmware %s\n", rtlpriv->cfg->fw_name);
+ /* request fw */
+ err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
+ rtlpriv->io.dev, GFP_KERNEL, hw,
+ rtl92su_fw_cb);
+ if (err) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Failed to request firmware!\n");
+ return 1;
+ }
+
+ return err;
+}
+
+static void rtl92su_deinit_sw_vars(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->rtlhal.pfirmware) {
+ vfree(rtlpriv->rtlhal.pfirmware);
+ rtlpriv->rtlhal.pfirmware = NULL;
+ }
+}
+
+static struct rtl_hal_ops rtl8192su_hal_ops = {
+ .modify_ieee80211_ops = rtl92su_modify_ieee80211_ops,
+ .init_sw_vars = rtl92su_init_sw_vars,
+ .deinit_sw_vars = rtl92su_deinit_sw_vars,
+ .read_chip_version = rtl92su_read_chip_version,
+ .read_eeprom_info = rtl92su_read_eeprom_info,
+ .interrupt_recognized = rtl92su_interrupt_recognized,
+ .hw_init = rtl92su_hw_init,
+ .hw_disable = rtl92su_card_disable,
+ //.hw_suspend = rtl92su_suspend,
+ //.hw_resume = rtl92su_resume,
+ .enable_interrupt = rtl92su_enable_interrupt,
+ .disable_interrupt = rtl92su_disable_interrupt,
+ .set_network_type = rtl92su_set_network_type,
+ .set_chk_bssid = rtl92su_set_check_bssid,
+ .set_qos = rtl92su_set_qos,
+ .set_bcn_reg = rtl92su_set_beacon_related_registers,
+ .set_bcn_intv = rtl92su_set_beacon_interval,
+ .update_interrupt_mask = rtl92su_update_interrupt_mask,
+ .get_hw_reg = rtl92su_get_hw_reg,
+ .set_hw_reg = rtl92su_set_hw_reg,
+ .update_rate_tbl = rtl92su_update_hal_rate_tbl,
+ .fill_tx_desc = rtl92su_tx_fill_desc,
+ .fill_tx_cmddesc = rtl92su_tx_fill_cmddesc,
+ .query_rx_desc = rtl92su_rx_query_desc,
+ .set_channel_access = rtl92su_update_channel_access_setting,
+ .radio_onoff_checking = rtl92su_gpio_radio_on_off_checking,
+ .set_bw_mode = rtl92s_phy_set_bw_mode,
+ //.switch_channel = rtl92s_phy_sw_chnl,
+ .switch_channel = rtl92s_set_fw_setchannel_cmd,
+ .dm_watchdog = rtl92s_dm_watchdog,
+ .scan_operation_backup = rtl92s_phy_scan_operation_backup,
+ .set_rf_power_state = rtl92s_phy_set_rf_power_state,
+ .led_control = rtl92su_led_control,
+ //.set_desc = rtl92su_set_desc,
+ //.get_desc = rtl92su_get_desc,
+ //.tx_polling = rtl92su_tx_polling,
+ .enable_hw_sec = rtl92su_enable_hw_security_config,
+ .set_key = rtl92su_set_key,
+ .init_sw_leds = rtl92su_init_sw_leds,
+ .deinit_sw_leds = rtl92su_deinit_sw_leds,
+ .get_bbreg = rtl92s_phy_query_bb_reg,
+ .set_bbreg = rtl92s_phy_set_bb_reg,
+ .get_rfreg = rtl92s_phy_query_rf_reg,
+ .set_rfreg = rtl92s_phy_set_rf_reg,
+};
+
+static struct rtl_mod_params rtl92su_mod_params = {
+ .sw_crypto = false,
+ .inactiveps = false,
+ .swctrl_lps = false,
+ .fwctrl_lps = false,
+ .debug = DBG_TRACE,
+};
+
+static struct rtl_hal_usbint_cfg rtl92su_interface_cfg = {
+ /* rx */
+ .in_ep_num = RTL92S_USB_BULK_IN_NUM,
+ .rx_urb_num = RTL92S_NUM_RX_URBS,
+ .rx_max_size = RTL92S_SIZE_MAX_RX_BUFFER,
+ .usb_rx_hdl = rtl8192su_rx_hdl,
+ .usb_rx_segregate_hdl = NULL, /* rtl8192s_rx_segregate_hdl; */
+ /* tx */
+ .usb_tx_cleanup = rtl8192s_tx_cleanup,
+ .usb_tx_post_hdl = rtl8192s_tx_post_hdl,
+ .usb_tx_aggregate_hdl = rtl8192s_tx_aggregate_hdl,
+ /* endpoint mapping */
+ .usb_endpoint_mapping = rtl8192su_endpoint_mapping,
+ .usb_mq_to_hwq = rtl8192su_mq_to_hwq,
+};
+
+static struct rtl_hal_cfg rtl92su_hal_cfg = {
+ .name = "rtl92s_usb",
+ .fw_name = "rtlwifi/rtl8712u.bin",
+ .ops = &rtl8192su_hal_ops,
+ .mod_params = &rtl92su_mod_params,
+ .usb_interface_cfg = &rtl92su_interface_cfg,
+
+ .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
+ .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
+ .maps[SYS_CLK] = SYS_CLKR,
+ .maps[MAC_RCR_AM] = RCR_AM,
+ .maps[MAC_RCR_AB] = RCR_AB,
+ .maps[MAC_RCR_ACRC32] = RCR_ACRC32,
+ .maps[MAC_RCR_ACF] = RCR_ACF,
+ .maps[MAC_RCR_AAP] = RCR_AAP,
+
+ .maps[EFUSE_TEST] = REG_EFUSE_TEST,
+ .maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+ .maps[EFUSE_CLK] = REG_EFUSE_CLK,
+ .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
+ .maps[EFUSE_PWC_EV12V] = 0,
+ .maps[EFUSE_FEN_ELDR] = 0,
+ .maps[EFUSE_LOADER_CLK_EN] = 0,
+ .maps[EFUSE_ANA8M] = EFUSE_ANA8M,
+ .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE_92S,
+ .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
+ .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
+ .maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
+
+ .maps[RWCAM] = REG_RWCAM,
+ .maps[WCAMI] = REG_WCAMI,
+ .maps[RCAMO] = REG_RCAMO,
+ .maps[CAMDBG] = REG_CAMDBG,
+ .maps[SECR] = REG_SECR,
+ .maps[SEC_CAM_NONE] = CAM_NONE,
+ .maps[SEC_CAM_WEP40] = CAM_WEP40,
+ .maps[SEC_CAM_TKIP] = CAM_TKIP,
+ .maps[SEC_CAM_AES] = CAM_AES,
+ .maps[SEC_CAM_WEP104] = CAM_WEP104,
+
+ .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
+ .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
+ .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
+ .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
+ .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
+ .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
+ .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
+ .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
+ .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
+ .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
+ .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
+ .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
+ .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
+ .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
+ .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
+ .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
+
+ .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
+ .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
+ .maps[RTL_IMR_BcnInt] = IMR_BCNINT,
+ .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
+ .maps[RTL_IMR_RDU] = IMR_RDU,
+ .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
+ .maps[RTL_IMR_BDOK] = IMR_BDOK,
+ .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
+ .maps[RTL_IMR_TBDER] = IMR_TBDER,
+ .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
+ .maps[RTL_IMR_COMDOK] = IMR_COMDOK,
+ .maps[RTL_IMR_TBDOK] = IMR_TBDOK,
+ .maps[RTL_IMR_BKDOK] = IMR_BKDOK,
+ .maps[RTL_IMR_BEDOK] = IMR_BEDOK,
+ .maps[RTL_IMR_VIDOK] = IMR_VIDOK,
+ .maps[RTL_IMR_VODOK] = IMR_VODOK,
+ .maps[RTL_IMR_ROK] = IMR_ROK,
+ .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
+
+ .maps[RTL_RC_CCK_RATE1M] = DESC92_RATE1M,
+ .maps[RTL_RC_CCK_RATE2M] = DESC92_RATE2M,
+ .maps[RTL_RC_CCK_RATE5_5M] = DESC92_RATE5_5M,
+ .maps[RTL_RC_CCK_RATE11M] = DESC92_RATE11M,
+ .maps[RTL_RC_OFDM_RATE6M] = DESC92_RATE6M,
+ .maps[RTL_RC_OFDM_RATE9M] = DESC92_RATE9M,
+ .maps[RTL_RC_OFDM_RATE12M] = DESC92_RATE12M,
+ .maps[RTL_RC_OFDM_RATE18M] = DESC92_RATE18M,
+ .maps[RTL_RC_OFDM_RATE24M] = DESC92_RATE24M,
+ .maps[RTL_RC_OFDM_RATE36M] = DESC92_RATE36M,
+ .maps[RTL_RC_OFDM_RATE48M] = DESC92_RATE48M,
+ .maps[RTL_RC_OFDM_RATE54M] = DESC92_RATE54M,
+
+ .maps[RTL_RC_HT_RATEMCS7] = DESC92_RATEMCS7,
+ .maps[RTL_RC_HT_RATEMCS15] = DESC92_RATEMCS15,
+};
+
+module_param_named(swenc, rtl92su_mod_params.sw_crypto, bool, 0444);
+module_param_named(debug, rtl92su_mod_params.debug, int, 0444);
+//module_param_named(ips, rtl92su_mod_params.inactiveps, bool, 0444);
+//module_param_named(swlps, rtl92su_mod_params.swctrl_lps, bool, 0444);
+//module_param_named(fwlps, rtl92su_mod_params.fwctrl_lps, bool, 0444);
+MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)");
+MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+//MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)");
+//MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)");
+//MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)");
+
+#define USB_VENDER_ID_REALTEK 0x0bda
+
+static struct usb_device_id rtl8192s_usb_ids[] = {
+
+/* RTL8188SU */
+ /* Realtek */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8171, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8173, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8712, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8713, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0xC512, rtl92su_hal_cfg)},
+ /* Abocom */
+ {RTL_USB_DEVICE(0x07B8, 0x8188, rtl92su_hal_cfg)},
+ /* ASUS */
+ {RTL_USB_DEVICE(0x0B05, 0x1786, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0B05, 0x1791, rtl92su_hal_cfg)}, /* 11n mode disable */
+ /* Belkin */
+ {RTL_USB_DEVICE(0x050D, 0x945A, rtl92su_hal_cfg)},
+ /* Corega */
+ {RTL_USB_DEVICE(0x07AA, 0x0047, rtl92su_hal_cfg)},
+ /* D-Link */
+ {RTL_USB_DEVICE(0x2001, 0x3306, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x07D1, 0x3306, rtl92su_hal_cfg)}, /* 11n mode disable */
+ /* Edimax */
+ {RTL_USB_DEVICE(0x7392, 0x7611, rtl92su_hal_cfg)},
+ /* EnGenius */
+ {RTL_USB_DEVICE(0x1740, 0x9603, rtl92su_hal_cfg)},
+ /* Hawking */
+ {RTL_USB_DEVICE(0x0E66, 0x0016, rtl92su_hal_cfg)},
+ /* Hercules */
+ {RTL_USB_DEVICE(0x06F8, 0xE034, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x06F8, 0xE032, rtl92su_hal_cfg)},
+ /* Logitec */
+ {RTL_USB_DEVICE(0x0789, 0x0167, rtl92su_hal_cfg)},
+ /* PCI */
+ {RTL_USB_DEVICE(0x2019, 0xAB28, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x2019, 0xED16, rtl92su_hal_cfg)},
+ /* Sitecom */
+ {RTL_USB_DEVICE(0x0DF6, 0x0057, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0DF6, 0x0045, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0DF6, 0x0059, rtl92su_hal_cfg)}, /* 11n mode disable */
+ {RTL_USB_DEVICE(0x0DF6, 0x004B, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0DF6, 0x005B, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0DF6, 0x005D, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0DF6, 0x0063, rtl92su_hal_cfg)},
+ /* Sweex */
+ {RTL_USB_DEVICE(0x177F, 0x0154, rtl92su_hal_cfg)},
+ /* Thinkware */
+ {RTL_USB_DEVICE(0x0BDA, 0x5077, rtl92su_hal_cfg)},
+ /* Toshiba */
+ {RTL_USB_DEVICE(0x1690, 0x0752, rtl92su_hal_cfg)},
+ /* - */
+ {RTL_USB_DEVICE(0x20F4, 0x646B, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x083A, 0xC512, rtl92su_hal_cfg)},
+
+/* RTL8191SU */
+ /* Realtek */
+ {RTL_USB_DEVICE(0x0BDA, 0x8172, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0BDA, 0x8192, rtl92su_hal_cfg)},
+ /* Amigo */
+ {RTL_USB_DEVICE(0x0EB0, 0x9061, rtl92su_hal_cfg)},
+ /* ASUS/EKB */
+ {RTL_USB_DEVICE(0x13D3, 0x3323, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x13D3, 0x3311, rtl92su_hal_cfg)}, /* 11n mode disable */
+ {RTL_USB_DEVICE(0x13D3, 0x3342, rtl92su_hal_cfg)},
+ /* ASUS/EKBLenovo */
+ {RTL_USB_DEVICE(0x13D3, 0x3333, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x13D3, 0x3334, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x13D3, 0x3335, rtl92su_hal_cfg)}, /* 11n mode disable */
+ {RTL_USB_DEVICE(0x13D3, 0x3336, rtl92su_hal_cfg)}, /* 11n mode disable */
+ /* ASUS/Media BOX */
+ {RTL_USB_DEVICE(0x13D3, 0x3309, rtl92su_hal_cfg)},
+ /* Belkin */
+ {RTL_USB_DEVICE(0x050D, 0x815F, rtl92su_hal_cfg)},
+ /* D-Link */
+ {RTL_USB_DEVICE(0x07D1, 0x3302, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x07D1, 0x3300, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x07D1, 0x3303, rtl92su_hal_cfg)},
+ /* Edimax */
+ {RTL_USB_DEVICE(0x7392, 0x7612, rtl92su_hal_cfg)},
+ /* EnGenius */
+ {RTL_USB_DEVICE(0x1740, 0x9605, rtl92su_hal_cfg)},
+ /* Guillemot */
+ {RTL_USB_DEVICE(0x06F8, 0xE031, rtl92su_hal_cfg)},
+ /* Hawking */
+ {RTL_USB_DEVICE(0x0E66, 0x0015, rtl92su_hal_cfg)},
+ /* Mediao */
+ {RTL_USB_DEVICE(0x13D3, 0x3306, rtl92su_hal_cfg)},
+ /* PCI */
+ {RTL_USB_DEVICE(0x2019, 0xED18, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x2019, 0x4901, rtl92su_hal_cfg)},
+ /* Sitecom */
+ {RTL_USB_DEVICE(0x0DF6, 0x0058, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0DF6, 0x0049, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0DF6, 0x004C, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x0DF6, 0x0064, rtl92su_hal_cfg)},
+ /* Skyworth */
+ {RTL_USB_DEVICE(0x14b2, 0x3300, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x14b2, 0x3301, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x14B2, 0x3302, rtl92su_hal_cfg)},
+ /* - */
+ {RTL_USB_DEVICE(0x04F2, 0xAFF2, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x04F2, 0xAFF5, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x04F2, 0xAFF6, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x13D3, 0x3339, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x13D3, 0x3340, rtl92su_hal_cfg)}, /* 11n mode disable */
+ {RTL_USB_DEVICE(0x13D3, 0x3341, rtl92su_hal_cfg)}, /* 11n mode disable */
+ {RTL_USB_DEVICE(0x13D3, 0x3310, rtl92su_hal_cfg)},
+ {RTL_USB_DEVICE(0x13D3, 0x3325, rtl92su_hal_cfg)},
+
+/* RTL8192SU */
+ /* Realtek */
+ {RTL_USB_DEVICE(0x0BDA, 0x8174, rtl92su_hal_cfg)},
+ /* Belkin */
+ {RTL_USB_DEVICE(0x050D, 0x845A, rtl92su_hal_cfg)},
+ /* Corega */
+ {RTL_USB_DEVICE(0x07AA, 0x0051, rtl92su_hal_cfg)},
+ /* Edimax */
+ {RTL_USB_DEVICE(0x7392, 0x7622, rtl92su_hal_cfg)},
+ /* NEC */
+ {RTL_USB_DEVICE(0x0409, 0x02B6, rtl92su_hal_cfg)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8192s_usb_ids);
+
+static struct usb_driver rtl8192su_driver = {
+ .name = "rtl8192su",
+ .probe = rtl_usb_probe,
+ .disconnect = rtl_usb_disconnect,
+ .id_table = rtl8192s_usb_ids,
+
+#ifdef CONFIG_PM
+ /* .suspend = rtl_usb_suspend, */
+ /* .resume = rtl_usb_resume, */
+ /* .reset_resume = rtl8192c_resume, */
+#endif /* CONFIG_PM */
+#ifdef CONFIG_AUTOSUSPEND
+ .supports_autosuspend = 1,
+#endif
+};
+
+#if 1
+static int __init rtl8192su_init(void)
+{
+ return usb_register(&rtl8192su_driver);
+}
+
+static void __exit rtl8192su_exit(void)
+{
+ usb_deregister(&rtl8192su_driver);
+}
+
+module_init(rtl8192su_init);
+module_exit(rtl8192su_exit);
+#else
+module_usb_driver(rtl8192su_driver);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/sw.h b/drivers/net/wireless/rtlwifi/rtl8192su/sw.h
new file mode 100644
index 0000000..5b9b553
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/sw.h
@@ -0,0 +1,36 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_SW_H__
+#define __REALTEK_PCI92SE_SW_H__
+
+#define EFUSE_MAX_SECTION 16
+
+int rtl92su_init_sw(struct ieee80211_hw *hw);
+void rtl92su_deinit_sw(struct ieee80211_hw *hw);
+void rtl92su_init_var_map(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/table.c b/drivers/net/wireless/rtlwifi/rtl8192su/table.c
new file mode 100644
index 0000000..9295208
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/table.c
@@ -0,0 +1,633 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ * Created on 2010/ 5/18, 1:41
+ *****************************************************************************/
+
+#include "table.h"
+
+u32 rtl8192sephy_reg_2t2rarray[PHY_REG_2T2RARRAYLENGTH] = {
+ 0x01c, 0x07000000,
+ 0x800, 0x00040000,
+ 0x804, 0x00008003,
+ 0x808, 0x0000fc00,
+ 0x80c, 0x0000000a,
+ 0x810, 0x10005088,
+ 0x814, 0x020c3d10,
+ 0x818, 0x00200185,
+ 0x81c, 0x00000000,
+ 0x820, 0x01000000,
+ 0x824, 0x00390004,
+ 0x828, 0x01000000,
+ 0x82c, 0x00390004,
+ 0x830, 0x00000004,
+ 0x834, 0x00690200,
+ 0x838, 0x00000004,
+ 0x83c, 0x00690200,
+ 0x840, 0x00010000,
+ 0x844, 0x00010000,
+ 0x848, 0x00000000,
+ 0x84c, 0x00000000,
+ 0x850, 0x00000000,
+ 0x854, 0x00000000,
+ 0x858, 0x48484848,
+ 0x85c, 0x65a965a9,
+ 0x860, 0x0f7f0130,
+ 0x864, 0x0f7f0130,
+ 0x868, 0x0f7f0130,
+ 0x86c, 0x0f7f0130,
+ 0x870, 0x03000700,
+ 0x874, 0x03000300,
+ 0x878, 0x00020002,
+ 0x87c, 0x004f0201,
+ 0x880, 0xa8300ac1,
+ 0x884, 0x00000058,
+ 0x888, 0x00000008,
+ 0x88c, 0x00000004,
+ 0x890, 0x00000000,
+ 0x894, 0xfffffffe,
+ 0x898, 0x40302010,
+ 0x89c, 0x00706050,
+ 0x8b0, 0x00000000,
+ 0x8e0, 0x00000000,
+ 0x8e4, 0x00000000,
+ 0xe00, 0x30333333,
+ 0xe04, 0x2a2d2e2f,
+ 0xe08, 0x00003232,
+ 0xe10, 0x30333333,
+ 0xe14, 0x2a2d2e2f,
+ 0xe18, 0x30333333,
+ 0xe1c, 0x2a2d2e2f,
+ 0xe30, 0x01007c00,
+ 0xe34, 0x01004800,
+ 0xe38, 0x1000dc1f,
+ 0xe3c, 0x10008c1f,
+ 0xe40, 0x021400a0,
+ 0xe44, 0x281600a0,
+ 0xe48, 0xf8000001,
+ 0xe4c, 0x00002910,
+ 0xe50, 0x01007c00,
+ 0xe54, 0x01004800,
+ 0xe58, 0x1000dc1f,
+ 0xe5c, 0x10008c1f,
+ 0xe60, 0x021400a0,
+ 0xe64, 0x281600a0,
+ 0xe6c, 0x00002910,
+ 0xe70, 0x31ed92fb,
+ 0xe74, 0x361536fb,
+ 0xe78, 0x361536fb,
+ 0xe7c, 0x361536fb,
+ 0xe80, 0x361536fb,
+ 0xe84, 0x000d92fb,
+ 0xe88, 0x000d92fb,
+ 0xe8c, 0x31ed92fb,
+ 0xed0, 0x31ed92fb,
+ 0xed4, 0x31ed92fb,
+ 0xed8, 0x000d92fb,
+ 0xedc, 0x000d92fb,
+ 0xee0, 0x000d92fb,
+ 0xee4, 0x015e5448,
+ 0xee8, 0x21555448,
+ 0x900, 0x00000000,
+ 0x904, 0x00000023,
+ 0x908, 0x00000000,
+ 0x90c, 0x01121313,
+ 0xa00, 0x00d047c8,
+ 0xa04, 0x80ff0008,
+ 0xa08, 0x8ccd8300,
+ 0xa0c, 0x2e62120f,
+ 0xa10, 0x9500bb78,
+ 0xa14, 0x11144028,
+ 0xa18, 0x00881117,
+ 0xa1c, 0x89140f00,
+ 0xa20, 0x1a1b0000,
+ 0xa24, 0x090e1317,
+ 0xa28, 0x00000204,
+ 0xa2c, 0x10d30000,
+ 0xc00, 0x40071d40,
+ 0xc04, 0x00a05633,
+ 0xc08, 0x000000e4,
+ 0xc0c, 0x6c6c6c6c,
+ 0xc10, 0x08800000,
+ 0xc14, 0x40000100,
+ 0xc18, 0x08000000,
+ 0xc1c, 0x40000100,
+ 0xc20, 0x08000000,
+ 0xc24, 0x40000100,
+ 0xc28, 0x08000000,
+ 0xc2c, 0x40000100,
+ 0xc30, 0x6de9ac44,
+ 0xc34, 0x469652cf,
+ 0xc38, 0x49795994,
+ 0xc3c, 0x0a979764,
+ 0xc40, 0x1f7c403f,
+ 0xc44, 0x000100b7,
+ 0xc48, 0xec020000,
+ 0xc4c, 0x007f037f,
+ 0xc50, 0x69543420,
+ 0xc54, 0x433c0094,
+ 0xc58, 0x69543420,
+ 0xc5c, 0x433c0094,
+ 0xc60, 0x69543420,
+ 0xc64, 0x433c0094,
+ 0xc68, 0x69543420,
+ 0xc6c, 0x433c0094,
+ 0xc70, 0x2c7f000d,
+ 0xc74, 0x0186155b,
+ 0xc78, 0x0000001f,
+ 0xc7c, 0x00b91612,
+ 0xc80, 0x40000100,
+ 0xc84, 0x20f60000,
+ 0xc88, 0x20000080,
+ 0xc8c, 0x20200000,
+ 0xc90, 0x40000100,
+ 0xc94, 0x00000000,
+ 0xc98, 0x40000100,
+ 0xc9c, 0x00000000,
+ 0xca0, 0x00492492,
+ 0xca4, 0x00000000,
+ 0xca8, 0x00000000,
+ 0xcac, 0x00000000,
+ 0xcb0, 0x00000000,
+ 0xcb4, 0x00000000,
+ 0xcb8, 0x00000000,
+ 0xcbc, 0x28000000,
+ 0xcc0, 0x00000000,
+ 0xcc4, 0x00000000,
+ 0xcc8, 0x00000000,
+ 0xccc, 0x00000000,
+ 0xcd0, 0x00000000,
+ 0xcd4, 0x00000000,
+ 0xcd8, 0x64b22427,
+ 0xcdc, 0x00766932,
+ 0xce0, 0x00222222,
+ 0xce4, 0x00000000,
+ 0xce8, 0x37644302,
+ 0xcec, 0x2f97d40c,
+ 0xd00, 0x00000750,
+ 0xd04, 0x00000403,
+ 0xd08, 0x0000907f,
+ 0xd0c, 0x00000001,
+ 0xd10, 0xa0633333,
+ 0xd14, 0x33333c63,
+ 0xd18, 0x6a8f5b6b,
+ 0xd1c, 0x00000000,
+ 0xd20, 0x00000000,
+ 0xd24, 0x00000000,
+ 0xd28, 0x00000000,
+ 0xd2c, 0xcc979975,
+ 0xd30, 0x00000000,
+ 0xd34, 0x00000000,
+ 0xd38, 0x00000000,
+ 0xd3c, 0x00027293,
+ 0xd40, 0x00000000,
+ 0xd44, 0x00000000,
+ 0xd48, 0x00000000,
+ 0xd50, 0x6437140a,
+ 0xd54, 0x024dbd02,
+ 0xd58, 0x00000000,
+ 0xd5c, 0x30032064,
+ 0xd60, 0x4653de68,
+ 0xd64, 0x00518a3c,
+ 0xd68, 0x00002101,
+ 0xf14, 0x00000003,
+ 0xf4c, 0x00000000,
+ 0xf00, 0x00000300,
+};
+
+u32 rtl8192sephy_changeto_1t1rarray[PHY_CHANGETO_1T1RARRAYLENGTH] = {
+ 0x844, 0xffffffff, 0x00010000,
+ 0x804, 0x0000000f, 0x00000001,
+ 0x824, 0x00f0000f, 0x00300004,
+ 0x82c, 0x00f0000f, 0x00100002,
+ 0x870, 0x04000000, 0x00000001,
+ 0x864, 0x00000400, 0x00000000,
+ 0x878, 0x000f000f, 0x00000002,
+ 0xe74, 0x0f000000, 0x00000002,
+ 0xe78, 0x0f000000, 0x00000002,
+ 0xe7c, 0x0f000000, 0x00000002,
+ 0xe80, 0x0f000000, 0x00000002,
+ 0x90c, 0x000000ff, 0x00000011,
+ 0xc04, 0x000000ff, 0x00000011,
+ 0xd04, 0x0000000f, 0x00000001,
+ 0x1f4, 0xffff0000, 0x00007777,
+ 0x234, 0xf8000000, 0x0000000a,
+};
+
+u32 rtl8192sephy_changeto_1t2rarray[PHY_CHANGETO_1T2RARRAYLENGTH] = {
+ 0x804, 0x0000000f, 0x00000003,
+ 0x824, 0x00f0000f, 0x00300004,
+ 0x82c, 0x00f0000f, 0x00300002,
+ 0x870, 0x04000000, 0x00000001,
+ 0x864, 0x00000400, 0x00000000,
+ 0x878, 0x000f000f, 0x00000002,
+ 0xe74, 0x0f000000, 0x00000002,
+ 0xe78, 0x0f000000, 0x00000002,
+ 0xe7c, 0x0f000000, 0x00000002,
+ 0xe80, 0x0f000000, 0x00000002,
+ 0x90c, 0x000000ff, 0x00000011,
+ 0xc04, 0x000000ff, 0x00000033,
+ 0xd04, 0x0000000f, 0x00000003,
+ 0x1f4, 0xffff0000, 0x00007777,
+ 0x234, 0xf8000000, 0x0000000a,
+};
+
+u32 rtl8192sephy_reg_array_pg[PHY_REG_ARRAY_PGLENGTH] = {
+ 0xe00, 0xffffffff, 0x06090909,
+ 0xe04, 0xffffffff, 0x00030406,
+ 0xe08, 0x0000ff00, 0x00000000,
+ 0xe10, 0xffffffff, 0x0a0c0d0e,
+ 0xe14, 0xffffffff, 0x04070809,
+ 0xe18, 0xffffffff, 0x0a0c0d0e,
+ 0xe1c, 0xffffffff, 0x04070809,
+ 0xe00, 0xffffffff, 0x04040404,
+ 0xe04, 0xffffffff, 0x00020204,
+ 0xe08, 0x0000ff00, 0x00000000,
+ 0xe10, 0xffffffff, 0x02040404,
+ 0xe14, 0xffffffff, 0x00000002,
+ 0xe18, 0xffffffff, 0x02040404,
+ 0xe1c, 0xffffffff, 0x00000002,
+ 0xe00, 0xffffffff, 0x04040404,
+ 0xe04, 0xffffffff, 0x00020204,
+ 0xe08, 0x0000ff00, 0x00000000,
+ 0xe10, 0xffffffff, 0x02040404,
+ 0xe14, 0xffffffff, 0x00000002,
+ 0xe18, 0xffffffff, 0x02040404,
+ 0xe1c, 0xffffffff, 0x00000002,
+ 0xe00, 0xffffffff, 0x02020202,
+ 0xe04, 0xffffffff, 0x00020202,
+ 0xe08, 0x0000ff00, 0x00000000,
+ 0xe10, 0xffffffff, 0x02020202,
+ 0xe14, 0xffffffff, 0x00000002,
+ 0xe18, 0xffffffff, 0x02020202,
+ 0xe1c, 0xffffffff, 0x00000002,
+};
+
+u32 rtl8192seradioa_1t_array[RADIOA_1T_ARRAYLENGTH] = {
+ 0x000, 0x00030159,
+ 0x001, 0x00030250,
+ 0x002, 0x00010000,
+ 0x010, 0x0008000f,
+ 0x011, 0x000231fc,
+ 0x010, 0x000c000f,
+ 0x011, 0x0003f9f8,
+ 0x010, 0x0002000f,
+ 0x011, 0x00020101,
+ 0x014, 0x0001093e,
+ 0x014, 0x0009093e,
+ 0x015, 0x0000f8f4,
+ 0x017, 0x000f6500,
+ 0x01a, 0x00013056,
+ 0x01b, 0x00060000,
+ 0x01c, 0x00000300,
+ 0x01e, 0x00031059,
+ 0x021, 0x00054000,
+ 0x022, 0x0000083c,
+ 0x023, 0x00001558,
+ 0x024, 0x00000060,
+ 0x025, 0x00022583,
+ 0x026, 0x0000f200,
+ 0x027, 0x000eacf1,
+ 0x028, 0x0009bd54,
+ 0x029, 0x00004582,
+ 0x02a, 0x00000001,
+ 0x02b, 0x00021334,
+ 0x02a, 0x00000000,
+ 0x02b, 0x0000000a,
+ 0x02a, 0x00000001,
+ 0x02b, 0x00000808,
+ 0x02b, 0x00053333,
+ 0x02c, 0x0000000c,
+ 0x02a, 0x00000002,
+ 0x02b, 0x00000808,
+ 0x02b, 0x0005b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000003,
+ 0x02b, 0x00000808,
+ 0x02b, 0x00063333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000004,
+ 0x02b, 0x00000808,
+ 0x02b, 0x0006b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000005,
+ 0x02b, 0x00000709,
+ 0x02b, 0x00053333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000006,
+ 0x02b, 0x00000709,
+ 0x02b, 0x0005b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000007,
+ 0x02b, 0x00000709,
+ 0x02b, 0x00063333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000008,
+ 0x02b, 0x00000709,
+ 0x02b, 0x0006b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000009,
+ 0x02b, 0x0000060a,
+ 0x02b, 0x00053333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000a,
+ 0x02b, 0x0000060a,
+ 0x02b, 0x0005b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000b,
+ 0x02b, 0x0000060a,
+ 0x02b, 0x00063333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000c,
+ 0x02b, 0x0000060a,
+ 0x02b, 0x0006b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000d,
+ 0x02b, 0x0000050b,
+ 0x02b, 0x00053333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000e,
+ 0x02b, 0x0000050b,
+ 0x02b, 0x00066623,
+ 0x02c, 0x0000001a,
+ 0x02a, 0x000e4000,
+ 0x030, 0x00020000,
+ 0x031, 0x000b9631,
+ 0x032, 0x0000130d,
+ 0x033, 0x00000187,
+ 0x013, 0x00019e6c,
+ 0x013, 0x00015e94,
+ 0x000, 0x00010159,
+ 0x018, 0x0000f401,
+ 0x0fe, 0x00000000,
+ 0x01e, 0x0003105b,
+ 0x0fe, 0x00000000,
+ 0x000, 0x00030159,
+ 0x010, 0x0004000f,
+ 0x011, 0x000203f9,
+};
+
+u32 rtl8192seradiob_array[RADIOB_ARRAYLENGTH] = {
+ 0x000, 0x00030159,
+ 0x001, 0x00001041,
+ 0x002, 0x00011000,
+ 0x005, 0x00080fc0,
+ 0x007, 0x000fc803,
+ 0x013, 0x00017cb0,
+ 0x013, 0x00011cc0,
+ 0x013, 0x0000dc60,
+ 0x013, 0x00008c60,
+ 0x013, 0x00004450,
+ 0x013, 0x00000020,
+};
+
+u32 rtl8192seradiob_gm_array[RADIOB_GM_ARRAYLENGTH] = {
+ 0x000, 0x00030159,
+ 0x001, 0x00001041,
+ 0x002, 0x00011000,
+ 0x005, 0x00080fc0,
+ 0x007, 0x000fc803,
+};
+
+u32 rtl8192semac_2t_array[MAC_2T_ARRAYLENGTH] = {
+ 0x020, 0x00000035,
+ 0x048, 0x0000000e,
+ 0x049, 0x000000f0,
+ 0x04a, 0x00000077,
+ 0x04b, 0x00000083,
+ 0x0b5, 0x00000021,
+ 0x0dc, 0x000000ff,
+ 0x0dd, 0x000000ff,
+ 0x0de, 0x000000ff,
+ 0x0df, 0x000000ff,
+ 0x116, 0x00000000,
+ 0x117, 0x00000000,
+ 0x118, 0x00000000,
+ 0x119, 0x00000000,
+ 0x11a, 0x00000000,
+ 0x11b, 0x00000000,
+ 0x11c, 0x00000000,
+ 0x11d, 0x00000000,
+ 0x160, 0x0000000b,
+ 0x161, 0x0000000b,
+ 0x162, 0x0000000b,
+ 0x163, 0x0000000b,
+ 0x164, 0x0000000b,
+ 0x165, 0x0000000b,
+ 0x166, 0x0000000b,
+ 0x167, 0x0000000b,
+ 0x168, 0x0000000b,
+ 0x169, 0x0000000b,
+ 0x16a, 0x0000000b,
+ 0x16b, 0x0000000b,
+ 0x16c, 0x0000000b,
+ 0x16d, 0x0000000b,
+ 0x16e, 0x0000000b,
+ 0x16f, 0x0000000b,
+ 0x170, 0x0000000b,
+ 0x171, 0x0000000b,
+ 0x172, 0x0000000b,
+ 0x173, 0x0000000b,
+ 0x174, 0x0000000b,
+ 0x175, 0x0000000b,
+ 0x176, 0x0000000b,
+ 0x177, 0x0000000b,
+ 0x178, 0x0000000b,
+ 0x179, 0x0000000b,
+ 0x17a, 0x0000000b,
+ 0x17b, 0x0000000b,
+ 0x17c, 0x0000000b,
+ 0x17d, 0x0000000b,
+ 0x17e, 0x0000000b,
+ 0x17f, 0x0000000b,
+ 0x236, 0x0000000c,
+ 0x503, 0x00000022,
+ 0x560, 0x00000000,
+};
+
+u32 rtl8192seagctab_array[AGCTAB_ARRAYLENGTH] = {
+ 0xc78, 0x7f000001,
+ 0xc78, 0x7f010001,
+ 0xc78, 0x7e020001,
+ 0xc78, 0x7d030001,
+ 0xc78, 0x7c040001,
+ 0xc78, 0x7b050001,
+ 0xc78, 0x7a060001,
+ 0xc78, 0x79070001,
+ 0xc78, 0x78080001,
+ 0xc78, 0x77090001,
+ 0xc78, 0x760a0001,
+ 0xc78, 0x750b0001,
+ 0xc78, 0x740c0001,
+ 0xc78, 0x730d0001,
+ 0xc78, 0x720e0001,
+ 0xc78, 0x710f0001,
+ 0xc78, 0x70100001,
+ 0xc78, 0x6f110001,
+ 0xc78, 0x6f120001,
+ 0xc78, 0x6e130001,
+ 0xc78, 0x6d140001,
+ 0xc78, 0x6d150001,
+ 0xc78, 0x6c160001,
+ 0xc78, 0x6b170001,
+ 0xc78, 0x6a180001,
+ 0xc78, 0x6a190001,
+ 0xc78, 0x691a0001,
+ 0xc78, 0x681b0001,
+ 0xc78, 0x671c0001,
+ 0xc78, 0x661d0001,
+ 0xc78, 0x651e0001,
+ 0xc78, 0x641f0001,
+ 0xc78, 0x63200001,
+ 0xc78, 0x4c210001,
+ 0xc78, 0x4b220001,
+ 0xc78, 0x4a230001,
+ 0xc78, 0x49240001,
+ 0xc78, 0x48250001,
+ 0xc78, 0x47260001,
+ 0xc78, 0x46270001,
+ 0xc78, 0x45280001,
+ 0xc78, 0x44290001,
+ 0xc78, 0x2c2a0001,
+ 0xc78, 0x2b2b0001,
+ 0xc78, 0x2a2c0001,
+ 0xc78, 0x292d0001,
+ 0xc78, 0x282e0001,
+ 0xc78, 0x272f0001,
+ 0xc78, 0x26300001,
+ 0xc78, 0x25310001,
+ 0xc78, 0x24320001,
+ 0xc78, 0x23330001,
+ 0xc78, 0x22340001,
+ 0xc78, 0x09350001,
+ 0xc78, 0x08360001,
+ 0xc78, 0x07370001,
+ 0xc78, 0x06380001,
+ 0xc78, 0x05390001,
+ 0xc78, 0x043a0001,
+ 0xc78, 0x033b0001,
+ 0xc78, 0x023c0001,
+ 0xc78, 0x013d0001,
+ 0xc78, 0x003e0001,
+ 0xc78, 0x003f0001,
+ 0xc78, 0x7f400001,
+ 0xc78, 0x7f410001,
+ 0xc78, 0x7e420001,
+ 0xc78, 0x7d430001,
+ 0xc78, 0x7c440001,
+ 0xc78, 0x7b450001,
+ 0xc78, 0x7a460001,
+ 0xc78, 0x79470001,
+ 0xc78, 0x78480001,
+ 0xc78, 0x77490001,
+ 0xc78, 0x764a0001,
+ 0xc78, 0x754b0001,
+ 0xc78, 0x744c0001,
+ 0xc78, 0x734d0001,
+ 0xc78, 0x724e0001,
+ 0xc78, 0x714f0001,
+ 0xc78, 0x70500001,
+ 0xc78, 0x6f510001,
+ 0xc78, 0x6f520001,
+ 0xc78, 0x6e530001,
+ 0xc78, 0x6d540001,
+ 0xc78, 0x6d550001,
+ 0xc78, 0x6c560001,
+ 0xc78, 0x6b570001,
+ 0xc78, 0x6a580001,
+ 0xc78, 0x6a590001,
+ 0xc78, 0x695a0001,
+ 0xc78, 0x685b0001,
+ 0xc78, 0x675c0001,
+ 0xc78, 0x665d0001,
+ 0xc78, 0x655e0001,
+ 0xc78, 0x645f0001,
+ 0xc78, 0x63600001,
+ 0xc78, 0x4c610001,
+ 0xc78, 0x4b620001,
+ 0xc78, 0x4a630001,
+ 0xc78, 0x49640001,
+ 0xc78, 0x48650001,
+ 0xc78, 0x47660001,
+ 0xc78, 0x46670001,
+ 0xc78, 0x45680001,
+ 0xc78, 0x44690001,
+ 0xc78, 0x2c6a0001,
+ 0xc78, 0x2b6b0001,
+ 0xc78, 0x2a6c0001,
+ 0xc78, 0x296d0001,
+ 0xc78, 0x286e0001,
+ 0xc78, 0x276f0001,
+ 0xc78, 0x26700001,
+ 0xc78, 0x25710001,
+ 0xc78, 0x24720001,
+ 0xc78, 0x23730001,
+ 0xc78, 0x22740001,
+ 0xc78, 0x09750001,
+ 0xc78, 0x08760001,
+ 0xc78, 0x07770001,
+ 0xc78, 0x06780001,
+ 0xc78, 0x05790001,
+ 0xc78, 0x047a0001,
+ 0xc78, 0x037b0001,
+ 0xc78, 0x027c0001,
+ 0xc78, 0x017d0001,
+ 0xc78, 0x007e0001,
+ 0xc78, 0x007f0001,
+ 0xc78, 0x3000001e,
+ 0xc78, 0x3001001e,
+ 0xc78, 0x3002001e,
+ 0xc78, 0x3003001e,
+ 0xc78, 0x3004001e,
+ 0xc78, 0x3405001e,
+ 0xc78, 0x3806001e,
+ 0xc78, 0x3e07001e,
+ 0xc78, 0x3e08001e,
+ 0xc78, 0x4409001e,
+ 0xc78, 0x460a001e,
+ 0xc78, 0x480b001e,
+ 0xc78, 0x480c001e,
+ 0xc78, 0x4e0d001e,
+ 0xc78, 0x560e001e,
+ 0xc78, 0x5a0f001e,
+ 0xc78, 0x5e10001e,
+ 0xc78, 0x6211001e,
+ 0xc78, 0x6c12001e,
+ 0xc78, 0x7213001e,
+ 0xc78, 0x7214001e,
+ 0xc78, 0x7215001e,
+ 0xc78, 0x7216001e,
+ 0xc78, 0x7217001e,
+ 0xc78, 0x7218001e,
+ 0xc78, 0x7219001e,
+ 0xc78, 0x721a001e,
+ 0xc78, 0x721b001e,
+ 0xc78, 0x721c001e,
+ 0xc78, 0x721d001e,
+ 0xc78, 0x721e001e,
+ 0xc78, 0x721f001e,
+};
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/table.h b/drivers/net/wireless/rtlwifi/rtl8192su/table.h
new file mode 100644
index 0000000..df5b861
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/table.h
@@ -0,0 +1,48 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8192SE_FW_IMG_H
+#define __INC_HAL8192SE_FW_IMG_H
+
+#include <linux/types.h>
+
+/*Created on 2010/ 4/12, 5:56*/
+
+#define PHY_REG_2T2RARRAYLENGTH 372
+extern u32 rtl8192sephy_reg_2t2rarray[PHY_REG_2T2RARRAYLENGTH];
+#define PHY_CHANGETO_1T1RARRAYLENGTH 48
+extern u32 rtl8192sephy_changeto_1t1rarray[PHY_CHANGETO_1T1RARRAYLENGTH];
+#define PHY_CHANGETO_1T2RARRAYLENGTH 45
+extern u32 rtl8192sephy_changeto_1t2rarray[PHY_CHANGETO_1T2RARRAYLENGTH];
+#define PHY_REG_ARRAY_PGLENGTH 84
+extern u32 rtl8192sephy_reg_array_pg[PHY_REG_ARRAY_PGLENGTH];
+#define RADIOA_1T_ARRAYLENGTH 202
+extern u32 rtl8192seradioa_1t_array[RADIOA_1T_ARRAYLENGTH];
+#define RADIOB_ARRAYLENGTH 22
+extern u32 rtl8192seradiob_array[RADIOB_ARRAYLENGTH];
+#define RADIOB_GM_ARRAYLENGTH 10
+extern u32 rtl8192seradiob_gm_array[RADIOB_GM_ARRAYLENGTH];
+#define MAC_2T_ARRAYLENGTH 106
+extern u32 rtl8192semac_2t_array[MAC_2T_ARRAYLENGTH];
+#define AGCTAB_ARRAYLENGTH 320
+extern u32 rtl8192seagctab_array[AGCTAB_ARRAYLENGTH];
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/trx.c b/drivers/net/wireless/rtlwifi/rtl8192su/trx.c
new file mode 100644
index 0000000..67abf79
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/trx.c
@@ -0,0 +1,1089 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../usb.h"
+#include "../ps.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "fw.h"
+#include "trx.h"
+#include "led.h"
+#include "rf.h"
+#include "dm.h"
+
+static void _ThreeOutEpMapping(struct rtl_ep_map *ep_map)
+{
+ ep_map->ep_mapping[RTL_TXQ_BK] = 0x06;
+ ep_map->ep_mapping[RTL_TXQ_BE] = 0x06;
+ ep_map->ep_mapping[RTL_TXQ_VI] = 0x04;
+ ep_map->ep_mapping[RTL_TXQ_VO] = 0x04;
+ ep_map->ep_mapping[RTL_TXQ_MGT] = 0x0d;
+ ep_map->ep_mapping[RTL_TXQ_BCN] = 0x0d;
+ ep_map->ep_mapping[RTL_TXQ_HI] = 0x0d;
+}
+
+static void _FiveOutEpMapping(struct rtl_ep_map *ep_map)
+{
+ ep_map->ep_mapping[RTL_TXQ_BK] = 0x07;
+ ep_map->ep_mapping[RTL_TXQ_BE] = 0x06;
+ ep_map->ep_mapping[RTL_TXQ_VI] = 0x05;
+ ep_map->ep_mapping[RTL_TXQ_VO] = 0x04;
+ ep_map->ep_mapping[RTL_TXQ_MGT] = 0x0d;
+ ep_map->ep_mapping[RTL_TXQ_BCN] = 0x0d;
+ ep_map->ep_mapping[RTL_TXQ_HI] = 0x0d;
+}
+
+static void _EightOutEpMapping(struct rtl_ep_map *ep_map)
+{
+ ep_map->ep_mapping[RTL_TXQ_BK] = 0x07;
+ ep_map->ep_mapping[RTL_TXQ_BE] = 0x06;
+ ep_map->ep_mapping[RTL_TXQ_VI] = 0x05;
+ ep_map->ep_mapping[RTL_TXQ_VO] = 0x04;
+ ep_map->ep_mapping[RTL_TXQ_MGT] = 0x0c;
+ ep_map->ep_mapping[RTL_TXQ_BCN] = 0x0a;
+ ep_map->ep_mapping[RTL_TXQ_HI] = 0x0b;
+}
+
+/* endpoint mapping */
+int rtl8192su_endpoint_mapping(struct ieee80211_hw *hw)
+{
+ struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw);
+ struct rtl_usb *rtlusb = rtl_usbdev(usb_priv);
+ struct rtl_ep_map *ep_map = &(rtlusb->ep_map);
+
+ rtlusb->in_ep = 0x03;
+ switch (rtlusb->out_ep_nums) {
+ case 3:
+ _ThreeOutEpMapping(ep_map);
+ break;
+ case 5:
+ _FiveOutEpMapping(ep_map);
+ break;
+ case 8:
+ _EightOutEpMapping(ep_map);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+u16 rtl8192su_mq_to_hwq(__le16 fc, u16 mac80211_queue_index)
+{
+ u16 hw_queue_index;
+
+ if (unlikely(ieee80211_is_beacon(fc))) {
+ hw_queue_index = RTL_TXQ_BCN;
+ goto out;
+ }
+ if (ieee80211_is_mgmt(fc)) {
+ hw_queue_index = RTL_TXQ_MGT;
+ goto out;
+ }
+ switch (mac80211_queue_index) {
+ case 0:
+ hw_queue_index = RTL_TXQ_VO;
+ break;
+ case 1:
+ hw_queue_index = RTL_TXQ_VI;
+ break;
+ case 2:
+ hw_queue_index = RTL_TXQ_BE;
+ break;
+ case 3:
+ hw_queue_index = RTL_TXQ_BK;
+ break;
+ default:
+ hw_queue_index = RTL_TXQ_BE;
+ RT_ASSERT(false, "QSLT_BE queue, skb_queue:%d\n",
+ mac80211_queue_index);
+ break;
+ }
+out:
+ return hw_queue_index;
+}
+
+static u8 _rtl92se_map_hwqueue_to_fwqueue(struct sk_buff *skb, u8 skb_queue)
+{
+ __le16 fc = rtl_get_fc(skb);
+
+ if (unlikely(ieee80211_is_beacon(fc)))
+ return QSLT_BEACON;
+ if (ieee80211_is_mgmt(fc))
+ return QSLT_MGNT;
+ if (ieee80211_is_nullfunc(fc))
+ return QSLT_HIGH;
+
+ return skb->priority;
+}
+
+#if 0
+/* rtl8712_recv.c query_rx_pwr_percentage */
+static u8 _rtl92s_query_rxpwrpercentage(char antpower)
+{
+ if ((antpower <= -100) || (antpower >= 20))
+ return 0;
+ else if (antpower >= 0)
+ return 100;
+ else
+ return 100 + antpower;
+}
+
+/* rtl8712_recv.c evm_db2percentage */
+static u8 _rtl92s_evm_db_to_percentage(char value)
+{
+ char ret_val;
+ ret_val = value;
+
+ if (ret_val >= 0)
+ ret_val = 0;
+
+ if (ret_val <= -33)
+ ret_val = -33;
+
+ ret_val = 0 - ret_val;
+ ret_val *= 3;
+
+ if (ret_val == 99)
+ ret_val = 100;
+
+ return ret_val;
+}
+
+static long _rtl92se_translate_todbm(struct ieee80211_hw *hw,
+ u8 signal_strength_index)
+{
+ long signal_power;
+
+ signal_power = (long)((signal_strength_index + 1) >> 1);
+ signal_power -= 95;
+ return signal_power;
+}
+
+/* rtl8712_recv.c r8712_signal_scale_mapping */
+static long _rtl92se_signal_scale_mapping(struct ieee80211_hw *hw,
+ long currsig)
+{
+ long retsig = 0;
+
+ /* Step 1. Scale mapping. */
+ if (currsig > 47)
+ retsig = 100;
+ else if (currsig > 14 && currsig <= 47)
+ retsig = 100 - ((47 - currsig) * 3) / 2;
+ else if (currsig > 2 && currsig <= 14)
+ retsig = 48 - ((14 - currsig) * 15) / 7;
+ else if (currsig >= 0)
+ retsig = currsig * 9 + 1;
+
+ return retsig;
+}
+
+/* rtl8712_recv.c query_rx_phy_status */
+static void _rtl92se_query_rxphystatus(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats, u8 *pdesc,
+ struct rx_fwinfo *p_drvinfo,
+ bool packet_match_bssid,
+ bool packet_toself,
+ bool packet_beacon)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct phy_sts_cck_8192s_t *cck_buf;
+ s8 rx_pwr_all = 0, rx_pwr[4];
+ u8 rf_rx_num = 0, evm, pwdb_all;
+ u8 i, max_spatial_stream;
+ u32 rssi, total_rssi = 0;
+ bool in_powersavemode = false;
+ bool is_cck = pstats->is_cck;
+
+ pstats->packet_matchbssid = packet_match_bssid;
+ pstats->packet_toself = packet_toself;
+ pstats->packet_beacon = packet_beacon;
+ pstats->rx_mimo_signalquality[0] = -1;
+ pstats->rx_mimo_signalquality[1] = -1;
+
+ if (is_cck) {
+ u8 report, cck_highpwr;
+ cck_buf = (struct phy_sts_cck_8192s_t *)p_drvinfo;
+
+ if (!in_powersavemode)
+ cck_highpwr = (u8) rtl_get_bbreg(hw,
+ RFPGA0_XA_HSSIPARAMETER2,
+ 0x200);
+ else
+ cck_highpwr = false;
+
+ if (!cck_highpwr) {
+ u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
+ report = cck_buf->cck_agc_rpt & 0xc0;
+ report = report >> 6;
+ switch (report) {
+ case 0x3:
+ rx_pwr_all = -40 - (cck_agc_rpt & 0x3e);
+ break;
+ case 0x2:
+ rx_pwr_all = -20 - (cck_agc_rpt & 0x3e);
+ break;
+ case 0x1:
+ rx_pwr_all = -2 - (cck_agc_rpt & 0x3e);
+ break;
+ case 0x0:
+ rx_pwr_all = 14 - (cck_agc_rpt & 0x3e);
+ break;
+ }
+ } else {
+ u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
+ report = p_drvinfo->cfosho[0] & 0x60;
+ report = report >> 5;
+ switch (report) {
+ case 0x3:
+ rx_pwr_all = -40 - ((cck_agc_rpt & 0x1f) << 1);
+ break;
+ case 0x2:
+ rx_pwr_all = -20 - ((cck_agc_rpt & 0x1f) << 1);
+ break;
+ case 0x1:
+ rx_pwr_all = -2 - ((cck_agc_rpt & 0x1f) << 1);
+ break;
+ case 0x0:
+ rx_pwr_all = 14 - ((cck_agc_rpt & 0x1f) << 1);
+ break;
+ }
+ }
+
+ pwdb_all = _rtl92s_query_rxpwrpercentage(rx_pwr_all);
+
+ /* CCK gain is smaller than OFDM/MCS gain, */
+ /* so we add gain diff by experiences, the val is 6 */
+ pwdb_all += 6;
+ if (pwdb_all > 100)
+ pwdb_all = 100;
+ /* modify the offset to make the same gain index with OFDM. */
+ if (pwdb_all > 34 && pwdb_all <= 42)
+ pwdb_all -= 2;
+ else if (pwdb_all > 26 && pwdb_all <= 34)
+ pwdb_all -= 6;
+ else if (pwdb_all > 14 && pwdb_all <= 26)
+ pwdb_all -= 8;
+ else if (pwdb_all > 4 && pwdb_all <= 14)
+ pwdb_all -= 4;
+
+ pstats->rx_pwdb_all = pwdb_all;
+ pstats->recvsignalpower = rx_pwr_all;
+
+ if (packet_match_bssid) {
+ u8 sq;
+ if (pstats->rx_pwdb_all > 40) {
+ sq = 100;
+ } else {
+ sq = cck_buf->sq_rpt;
+ if (sq > 64)
+ sq = 0;
+ else if (sq < 20)
+ sq = 100;
+ else
+ sq = ((64 - sq) * 100) / 44;
+ }
+
+ pstats->signalquality = sq;
+ pstats->rx_mimo_signalquality[0] = sq;
+ pstats->rx_mimo_signalquality[1] = -1;
+ }
+ } else {
+ rtlpriv->dm.rfpath_rxenable[0] =
+ rtlpriv->dm.rfpath_rxenable[1] = true;
+ for (i = RF90_PATH_A; i < RF90_PATH_MAX; i++) {
+ if (rtlpriv->dm.rfpath_rxenable[i])
+ rf_rx_num++;
+
+ rx_pwr[i] = ((p_drvinfo->gain_trsw[i] &
+ 0x3f) * 2) - 110;
+ rssi = _rtl92s_query_rxpwrpercentage(rx_pwr[i]);
+ total_rssi += rssi;
+ rtlpriv->stats.rx_snr_db[i] =
+ (long)(p_drvinfo->rxsnr[i] / 2);
+
+ if (packet_match_bssid)
+ pstats->rx_mimo_signalstrength[i] = (u8) rssi;
+ }
+
+ rx_pwr_all = ((p_drvinfo->pwdb_all >> 1) & 0x7f) - 110;
+ pwdb_all = _rtl92s_query_rxpwrpercentage(rx_pwr_all);
+ pstats->rx_pwdb_all = pwdb_all;
+ pstats->rxpower = rx_pwr_all;
+ pstats->recvsignalpower = rx_pwr_all;
+
+ if (pstats->is_ht && pstats->rate >= DESC92_RATEMCS8 &&
+ pstats->rate <= DESC92_RATEMCS15)
+ max_spatial_stream = 2;
+ else
+ max_spatial_stream = 1;
+
+ for (i = 0; i < max_spatial_stream; i++) {
+ evm = _rtl92s_evm_db_to_percentage(p_drvinfo->rxevm[i]);
+
+ if (packet_match_bssid) {
+ if (i == 0)
+ pstats->signalquality = (u8)(evm &
+ 0xff);
+ pstats->rx_mimo_signalquality[i] =
+ (u8) (evm & 0xff);
+ }
+ }
+ }
+
+ if (is_cck)
+ pstats->signalstrength = (u8)(_rtl92se_signal_scale_mapping(hw,
+ pwdb_all));
+ else if (rf_rx_num != 0)
+ pstats->signalstrength = (u8) (_rtl92se_signal_scale_mapping(hw,
+ total_rssi /= rf_rx_num));
+}
+
+/* rtl8712_recv.c process_rssi */
+static void _rtl92se_process_ui_rssi(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u8 rfpath;
+ u32 last_rssi, tmpval;
+
+ if (pstats->packet_toself || pstats->packet_beacon) {
+ rtlpriv->stats.rssi_calculate_cnt++;
+
+ if (rtlpriv->stats.ui_rssi.total_num++ >=
+ PHY_RSSI_SLID_WIN_MAX) {
+ rtlpriv->stats.ui_rssi.total_num =
+ PHY_RSSI_SLID_WIN_MAX;
+ last_rssi = rtlpriv->stats.ui_rssi.elements[
+ rtlpriv->stats.ui_rssi.index];
+ rtlpriv->stats.ui_rssi.total_val -= last_rssi;
+ }
+
+ rtlpriv->stats.ui_rssi.total_val += pstats->signalstrength;
+ rtlpriv->stats.ui_rssi.elements[rtlpriv->stats.ui_rssi.index++]
+ = pstats->signalstrength;
+
+ if (rtlpriv->stats.ui_rssi.index >= PHY_RSSI_SLID_WIN_MAX)
+ rtlpriv->stats.ui_rssi.index = 0;
+
+ tmpval = rtlpriv->stats.ui_rssi.total_val /
+ rtlpriv->stats.ui_rssi.total_num;
+ rtlpriv->stats.signal_strength = _rtl92se_translate_todbm(hw,
+ (u8) tmpval);
+ pstats->rssi = rtlpriv->stats.signal_strength;
+ }
+
+ if (!pstats->is_cck && pstats->packet_toself) {
+ for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath;
+ rfpath++) {
+ if (rtlpriv->stats.rx_rssi_percentage[rfpath] == 0) {
+ rtlpriv->stats.rx_rssi_percentage[rfpath] =
+ pstats->rx_mimo_signalstrength[rfpath];
+
+ }
+
+ if (pstats->rx_mimo_signalstrength[rfpath] >
+ rtlpriv->stats.rx_rssi_percentage[rfpath]) {
+ rtlpriv->stats.rx_rssi_percentage[rfpath] =
+ ((rtlpriv->stats.rx_rssi_percentage[rfpath]
+ * (RX_SMOOTH_FACTOR - 1)) +
+ (pstats->rx_mimo_signalstrength[rfpath])) /
+ (RX_SMOOTH_FACTOR);
+
+ rtlpriv->stats.rx_rssi_percentage[rfpath] =
+ rtlpriv->stats.rx_rssi_percentage[rfpath]
+ + 1;
+ } else {
+ rtlpriv->stats.rx_rssi_percentage[rfpath] =
+ ((rtlpriv->stats.rx_rssi_percentage[rfpath]
+ * (RX_SMOOTH_FACTOR - 1)) +
+ (pstats->rx_mimo_signalstrength[rfpath])) /
+ (RX_SMOOTH_FACTOR);
+ }
+
+ }
+ }
+}
+
+static void _rtl92se_update_rxsignalstatistics(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ int weighting = 0;
+
+ if (rtlpriv->stats.recv_signal_power == 0)
+ rtlpriv->stats.recv_signal_power = pstats->recvsignalpower;
+
+ if (pstats->recvsignalpower > rtlpriv->stats.recv_signal_power)
+ weighting = 5;
+ else if (pstats->recvsignalpower < rtlpriv->stats.recv_signal_power)
+ weighting = (-5);
+
+ rtlpriv->stats.recv_signal_power = (rtlpriv->stats.recv_signal_power * 5
+ + pstats->recvsignalpower +
+ weighting) / 6;
+}
+
+static void _rtl92se_process_pwdb(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ long undec_sm_pwdb = 0;
+
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ return;
+ } else {
+ undec_sm_pwdb =
+ rtlpriv->dm.undecorated_smoothed_pwdb;
+ }
+
+ if (pstats->packet_toself || pstats->packet_beacon) {
+ if (undec_sm_pwdb < 0)
+ undec_sm_pwdb = pstats->rx_pwdb_all;
+
+ if (pstats->rx_pwdb_all > (u32) undec_sm_pwdb) {
+ undec_sm_pwdb =
+ (((undec_sm_pwdb) *
+ (RX_SMOOTH_FACTOR - 1)) +
+ (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
+
+ undec_sm_pwdb = undec_sm_pwdb + 1;
+ } else {
+ undec_sm_pwdb = (((undec_sm_pwdb) *
+ (RX_SMOOTH_FACTOR - 1)) + (pstats->rx_pwdb_all)) /
+ (RX_SMOOTH_FACTOR);
+ }
+
+ rtlpriv->dm.undecorated_smoothed_pwdb = undec_sm_pwdb;
+ _rtl92se_update_rxsignalstatistics(hw, pstats);
+ }
+}
+
+static void rtl_92s_process_streams(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ if (pstats->rx_mimo_signalquality[stream] != -1) {
+ if (rtlpriv->stats.rx_evm_percentage[stream] == 0) {
+ rtlpriv->stats.rx_evm_percentage[stream] =
+ pstats->rx_mimo_signalquality[stream];
+ }
+
+ rtlpriv->stats.rx_evm_percentage[stream] =
+ ((rtlpriv->stats.rx_evm_percentage[stream] *
+ (RX_SMOOTH_FACTOR - 1)) +
+ (pstats->rx_mimo_signalquality[stream] *
+ 1)) / (RX_SMOOTH_FACTOR);
+ }
+ }
+}
+
+/* rtl8712_recv.c process_link_qual */
+static void _rtl92se_process_ui_link_quality(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 last_evm = 0, tmpval;
+
+ if (pstats->signalquality != 0) {
+ if (pstats->packet_toself || pstats->packet_beacon) {
+
+ if (rtlpriv->stats.ui_link_quality.total_num++ >=
+ PHY_LINKQUALITY_SLID_WIN_MAX) {
+ rtlpriv->stats.ui_link_quality.total_num =
+ PHY_LINKQUALITY_SLID_WIN_MAX;
+ last_evm =
+ rtlpriv->stats.ui_link_quality.elements[
+ rtlpriv->stats.ui_link_quality.index];
+ rtlpriv->stats.ui_link_quality.total_val -=
+ last_evm;
+ }
+
+ rtlpriv->stats.ui_link_quality.total_val +=
+ pstats->signalquality;
+ rtlpriv->stats.ui_link_quality.elements[
+ rtlpriv->stats.ui_link_quality.index++] =
+ pstats->signalquality;
+
+ if (rtlpriv->stats.ui_link_quality.index >=
+ PHY_LINKQUALITY_SLID_WIN_MAX)
+ rtlpriv->stats.ui_link_quality.index = 0;
+
+ tmpval = rtlpriv->stats.ui_link_quality.total_val /
+ rtlpriv->stats.ui_link_quality.total_num;
+ rtlpriv->stats.signal_quality = tmpval;
+
+ rtlpriv->stats.last_sigstrength_inpercent = tmpval;
+
+ rtl_92s_process_streams(hw, pstats);
+
+ }
+ }
+}
+
+/* rtl8712_recv.c process_phy_info */
+static void _rtl92se_process_phyinfo(struct ieee80211_hw *hw,
+ u8 *buffer,
+ struct rtl_stats *pcurrent_stats)
+{
+
+ if (!pcurrent_stats->packet_matchbssid &&
+ !pcurrent_stats->packet_beacon)
+ return;
+
+ _rtl92se_process_ui_rssi(hw, pcurrent_stats);
+ _rtl92se_process_pwdb(hw, pcurrent_stats);
+ _rtl92se_process_ui_link_quality(hw, pcurrent_stats);
+}
+
+static void _rtl92se_translate_rx_signal_stuff(struct ieee80211_hw *hw,
+ struct sk_buff *skb, struct rtl_stats *pstats,
+ u8 *pdesc, struct rx_fwinfo *p_drvinfo)
+{
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+ struct ieee80211_hdr *hdr;
+ u8 *tmp_buf;
+ u8 *praddr;
+ __le16 fc;
+ u16 type, cfc;
+ bool packet_matchbssid, packet_toself, packet_beacon;
+
+ tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift;
+
+ hdr = (struct ieee80211_hdr *)tmp_buf;
+ fc = hdr->frame_control;
+ cfc = le16_to_cpu(fc);
+ type = WLAN_FC_GET_TYPE(fc);
+ praddr = hdr->addr1;
+
+ packet_matchbssid = ((IEEE80211_FTYPE_CTL != type) &&
+ (!compare_ether_addr(mac->bssid, (cfc & IEEE80211_FCTL_TODS) ?
+ hdr->addr1 : (cfc & IEEE80211_FCTL_FROMDS) ?
+ hdr->addr2 : hdr->addr3)) && (!pstats->hwerror) &&
+ (!pstats->crc) && (!pstats->icv));
+
+ packet_toself = packet_matchbssid &&
+ (!compare_ether_addr(praddr, rtlefuse->dev_addr));
+
+ if (ieee80211_is_beacon(fc))
+ packet_beacon = true;
+
+ _rtl92se_query_rxphystatus(hw, pstats, pdesc, p_drvinfo,
+ packet_matchbssid, packet_toself, packet_beacon);
+ _rtl92se_process_phyinfo(hw, tmp_buf, pstats);
+}
+#endif
+
+/* r8712_signal_scale_mapping from rtl8712_recv.c */
+static s32 rtl92s_signal_scale_mapping(s32 cur_sig)
+{
+ s32 ret_sig;
+
+ if (cur_sig >= 51 && cur_sig <= 100)
+ ret_sig = 100;
+ else if (cur_sig >= 41 && cur_sig <= 50)
+ ret_sig = 80 + ((cur_sig - 40) * 2);
+ else if (cur_sig >= 31 && cur_sig <= 40)
+ ret_sig = 66 + (cur_sig - 30);
+ else if (cur_sig >= 21 && cur_sig <= 30)
+ ret_sig = 54 + (cur_sig - 20);
+ else if (cur_sig >= 10 && cur_sig <= 20)
+ ret_sig = 42 + (((cur_sig - 10) * 2) / 3);
+ else if (cur_sig >= 5 && cur_sig <= 9)
+ ret_sig = 22 + (((cur_sig - 5) * 3) / 2);
+ else if (cur_sig >= 1 && cur_sig <= 4)
+ ret_sig = 6 + (((cur_sig - 1) * 3) / 2);
+ else
+ ret_sig = cur_sig;
+ return ret_sig;
+}
+
+static void _rtl92su_c2h_survey_resp(struct ieee80211_hw *hw, u8 *data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct ndis_wlan_bssid_ex *survey = (struct ndis_wlan_bssid_ex *)data;
+ struct ndis_802_11_fixed_ies *fixed;
+ struct ieee80211_channel *chan;
+ struct cfg80211_bss *bss;
+ u16 caps, beaconint;
+ s32 signal;
+ u32 bssid_len;
+ u64 tsf;
+ int freq;
+ size_t ie_len;
+ u8 *ie;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, "Found BSS: %s/%pM, channel %i\n",
+ survey->ssid.ssid, survey->macaddr, survey->config.dsconfig);
+
+ bssid_len = le32_to_cpu(survey->len);
+
+ if (bssid_len < sizeof(struct ndis_wlan_bssid_ex) +
+ sizeof(struct ndis_802_11_fixed_ies))
+ return;
+
+ fixed = (struct ndis_802_11_fixed_ies *)survey->ies;
+
+ ie = survey->ies + sizeof(struct ndis_802_11_fixed_ies);
+ ie_len = survey->ielen - sizeof(struct ndis_802_11_fixed_ies);
+ if (sizeof(struct ndis_802_11_fixed_ies) > survey->ielen)
+ ie_len = 0;
+
+ freq = ieee80211_channel_to_frequency(survey->config.dsconfig,
+ IEEE80211_BAND_2GHZ);
+ chan = ieee80211_get_channel(hw->wiphy, freq);
+
+ signal = DBM_TO_MBM(rtl92s_signal_scale_mapping(le32_to_cpu(survey->rssi)));
+ tsf = le64_to_cpu(*(__le64 *)fixed->timestamp);
+ caps = le16_to_cpu(fixed->caps);
+ beaconint = le16_to_cpu(fixed->beaconint);
+
+ bss = cfg80211_inform_bss(hw->wiphy, chan, survey->macaddr, tsf, caps,
+ beaconint, ie, ie_len, signal, GFP_ATOMIC);
+ cfg80211_put_bss(bss);
+}
+
+void rtl92su_c2h_event(struct ieee80211_hw *hw, u8 *pdesc)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 len;
+ u8 evnum, seq;
+ u8 *data;
+ bool frag;
+
+ len = (u16)SHIFT_AND_MASK_LE(pdesc, 0, 16);
+ evnum = (u8)SHIFT_AND_MASK_LE(pdesc, 16, 8);
+ seq = (u8)SHIFT_AND_MASK_LE(pdesc, 24, 7);
+ frag = (bool)SHIFT_AND_MASK_LE(pdesc, 31, 1);
+ data = pdesc + 8;
+
+ //RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "C2H ID:%d len:%u\n", evnum, len);
+
+ switch(evnum) {
+ case 0x08: // SURVEY
+ _rtl92su_c2h_survey_resp(hw, data);
+ break;
+ case 0x09: // SURVEY_DONE
+ ieee80211_scan_completed(hw, false);
+ break;
+ case 0x13: // FWDBG
+ RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "fwdbg: %s%s",
+ data, data[len - 2] == '\n' ? "" : "\n");
+ break;
+
+ default:
+ RT_TRACE(rtlpriv, COMP_FW, DBG_WARNING, "unhandled C2H: %i\n",
+ evnum);
+ break;
+ }
+}
+
+bool rtl92su_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
+ struct ieee80211_rx_status *rx_status, u8 *pdesc,
+ struct sk_buff *skb)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+/*
+ struct rx_fwinfo *p_drvinfo;
+ u32 phystatus = (u32)GET_RX_STATUS_DESC_PHY_STATUS(pdesc);
+*/
+ struct ieee80211_hdr *hdr;
+ bool first_ampdu = false;
+
+ stats->length = (u16)GET_RX_STATUS_DESC_PKT_LEN(pdesc);
+ stats->rx_drvinfo_size = (u8)GET_RX_STATUS_DESC_DRVINFO_SIZE(pdesc) * 8;
+ stats->rx_bufshift = (u8)(GET_RX_STATUS_DESC_SHIFT(pdesc) & 0x03);
+ stats->icv = (u16)GET_RX_STATUS_DESC_ICV(pdesc);
+ stats->crc = (u16)GET_RX_STATUS_DESC_CRC32(pdesc);
+ stats->hwerror = (u16)(stats->crc | stats->icv);
+ stats->decrypted = !GET_RX_STATUS_DESC_SWDEC(pdesc);
+
+ stats->rate = (u8)GET_RX_STATUS_DESC_RX_MCS(pdesc);
+ stats->shortpreamble = (u16)GET_RX_STATUS_DESC_SPLCP(pdesc);
+ stats->isampdu = (bool)(GET_RX_STATUS_DESC_PAGGR(pdesc) == 1);
+ stats->isfirst_ampdu = (bool) ((GET_RX_STATUS_DESC_PAGGR(pdesc) == 1)
+ && (GET_RX_STATUS_DESC_FAGGR(pdesc) == 1));
+ stats->timestamp_low = GET_RX_STATUS_DESC_TSFL(pdesc);
+ stats->rx_is40Mhzpacket = (bool)GET_RX_STATUS_DESC_BW(pdesc);
+ stats->is_ht = (bool)GET_RX_STATUS_DESC_RX_HT(pdesc);
+ stats->is_cck = SE_RX_HAL_IS_CCK_RATE(pdesc);
+
+ if (stats->hwerror)
+ return false;
+
+ if (GET_RX_STATUS_DESC_MACID(pdesc) == 0x1f &&
+ GET_RX_STATUS_DESC_TID(pdesc) == 0x0f) {
+ /* C2H event */
+ rtl92su_c2h_event(hw, pdesc + RX_STATUS_DESC_SIZE);
+ return false;
+ }
+
+ rx_status->freq = hw->conf.channel->center_freq;
+ rx_status->band = hw->conf.channel->band;
+
+ hdr = (struct ieee80211_hdr *)(skb->data + stats->rx_drvinfo_size
+ + stats->rx_bufshift);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "DATA fc[%02x] a1[%pM] a2[%pM] a3[%pM]\n",
+ hdr->frame_control, hdr->addr1, hdr->addr2, hdr->addr3);
+
+ if (stats->crc)
+ rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+ if (stats->rx_is40Mhzpacket)
+ rx_status->flag |= RX_FLAG_40MHZ;
+
+ if (stats->is_ht)
+ rx_status->flag |= RX_FLAG_HT;
+
+ rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+
+ /* hw will set stats->decrypted true, if it finds the
+ * frame is open data frame or mgmt frame,
+ * hw will not decrypt robust managment frame
+ * for IEEE80211w but still set stats->decrypted
+ * true, so here we should set it back to undecrypted
+ * for IEEE80211w frame, and mac80211 sw will help
+ * to decrypt it */
+ if (stats->decrypted) {
+ if ((ieee80211_is_robust_mgmt_frame(hdr)) &&
+ (ieee80211_has_protected(hdr->frame_control)))
+ rx_status->flag &= ~RX_FLAG_DECRYPTED;
+ else
+ rx_status->flag |= RX_FLAG_DECRYPTED;
+ }
+
+ rx_status->rate_idx = rtlwifi_rate_mapping(hw,
+ stats->is_ht, stats->rate, first_ampdu);
+
+ rx_status->mactime = stats->timestamp_low;
+/*
+ if (phystatus) {
+ p_drvinfo = (struct rx_fwinfo *)(skb->data +
+ stats->rx_bufshift);
+ // this call currently results in a BUG: scheduling while atomic
+ // _rtl_rx_completed+0x81/0x210
+ // _rtl_usb_rx_process_noagg+0xa8/0x220
+ // rtl92su_rx_query_desc+0x782/0xa60
+ // rtl92s_phy_query_bb_reg+0x63/0xe0
+ // ...
+ _rtl92se_translate_rx_signal_stuff(hw, skb, stats, pdesc,
+ p_drvinfo);
+ }
+*/
+
+ /*rx_status->qual = stats->signal; */
+ rx_status->signal = stats->rssi + 10;
+ /*rx_status->noise = -stats->noise; */
+
+ return true;
+}
+
+void rtl8192su_rx_hdl(struct ieee80211_hw *hw, struct sk_buff * skb)
+{
+ struct ieee80211_rx_status *rx_status =
+ (struct ieee80211_rx_status *)IEEE80211_SKB_RXCB(skb);
+ u8 *rxdesc;
+ struct rtl_stats stats = {
+ .signal = 0,
+ .noise = -98,
+ .rate = 0,
+ };
+
+ memset(rx_status, 0, sizeof(*rx_status));
+ rxdesc = skb->data;
+ if (rtl92su_rx_query_desc(hw, &stats, rx_status, rxdesc, skb)) {
+ skb_pull(skb, (stats.rx_drvinfo_size + RTL_RX_DESC_SIZE));
+ memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
+ ieee80211_rx_irqsafe(hw, skb);
+ }
+}
+
+/*
+void rtl8192s_rx_segregate_hdl(
+ struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct sk_buff_head *skb_list)
+{
+}
+*/
+
+static void _rtl_fill_usb_tx_desc(u8 *txdesc)
+{
+ SET_TX_DESC_OWN(txdesc, 1);
+ SET_TX_DESC_LAST_SEG(txdesc, 1);
+ SET_TX_DESC_FIRST_SEG(txdesc, 1);
+}
+
+/*
+static void _rtl_tx_desc_checksum(u8 *txdesc)
+{
+ u16 *ptr = (u16 *)txdesc;
+ u16 checksum = 0;
+ u32 index;
+
+ // Clear first
+ SET_TX_DESC_TX_DESC_CHECKSUM(txdesc, 0);
+ for (index = 0; index < 16; index++)
+ checksum = checksum ^ (*(ptr + index));
+ SET_TX_DESC_TX_DESC_CHECKSUM(txdesc, cpu_to_le16(checksum));
+}
+*/
+
+void rtl92su_tx_fill_desc(struct ieee80211_hw *hw,
+ struct ieee80211_hdr *hdr, u8 *pdesc_tx,
+ struct ieee80211_tx_info *info, struct sk_buff *skb,
+ u8 hw_queue, struct rtl_tcb_desc *ptcb_desc)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct ieee80211_sta *sta = info->control.sta;
+ u8 *pdesc = (u8 *) pdesc_tx;
+ u16 seq_number;
+ __le16 fc = hdr->frame_control;
+ u8 reserved_macid = 0;
+ u8 fw_qsel = _rtl92se_map_hwqueue_to_fwqueue(skb, hw_queue);
+ u8 bw_40 = 0;
+
+ if (mac->opmode == NL80211_IFTYPE_STATION) {
+ bw_40 = mac->bw_40;
+ } else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC) {
+ if (sta)
+ bw_40 = sta->ht_cap.cap &
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ }
+
+ /* 3 Fill necessary field in First Descriptor */
+ /*DWORD 0*/
+ SET_TX_DESC_LINIP(pdesc, 0);
+ SET_TX_DESC_OFFSET(pdesc, 32);
+ /* fill in packet size before adding pdesc header */
+ SET_TX_DESC_PKT_SIZE(pdesc, (u16) skb->len - RTL_TX_HEADER_SIZE);
+
+ seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
+
+ rtl_get_tcb_desc(hw, info, sta, skb, ptcb_desc);
+
+ if (hw_queue == RTL_TXQ_MGT) {
+// SET_TX_DESC_MACID(pdesc, 0x05);
+// SET_TX_DESC_QUEUE_SEL(pdesc, fw_qsel);
+ SET_TX_DESC_QUEUE_SEL(pdesc, 0x11); // QSLT_HIGH
+ SET_TX_DESC_SEQ(pdesc, seq_number);
+
+ SET_TX_DESC_USER_RATE(pdesc, 1);
+ SET_TX_DESC_DISABLE_FB(pdesc, 1);
+ SET_TX_DESC_DATA_RATE_FB_LIMIT(pdesc, 0x1f);
+ } else {
+ if (rtlpriv->dm.useramask) {
+ /* set pdesc macId */
+ if (ptcb_desc->mac_id < 32) {
+ SET_TX_DESC_MACID(pdesc, ptcb_desc->mac_id);
+ reserved_macid |= ptcb_desc->mac_id;
+ }
+ }
+ SET_TX_DESC_RSVD_MACID(pdesc, reserved_macid);
+
+ SET_TX_DESC_TXHT(pdesc, ((ptcb_desc->hw_rate >=
+ DESC92_RATEMCS0) ? 1 : 0));
+
+ if (rtlhal->version == VERSION_8192S_ACUT) {
+ if (ptcb_desc->hw_rate == DESC92_RATE1M ||
+ ptcb_desc->hw_rate == DESC92_RATE2M ||
+ ptcb_desc->hw_rate == DESC92_RATE5_5M ||
+ ptcb_desc->hw_rate == DESC92_RATE11M) {
+ ptcb_desc->hw_rate = DESC92_RATE12M;
+ }
+ }
+
+ SET_TX_DESC_TX_RATE(pdesc, ptcb_desc->hw_rate);
+
+ if (ptcb_desc->use_shortgi || ptcb_desc->use_shortpreamble)
+ SET_TX_DESC_TX_SHORT(pdesc, 0);
+
+ /* Aggregation related */
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ SET_TX_DESC_AGG_ENABLE(pdesc, 1);
+
+ /* For AMPDU, we must insert SSN into TX_DESC */
+ SET_TX_DESC_SEQ(pdesc, seq_number);
+
+ /* Protection mode related */
+ /* For 92S, if RTS/CTS are set, HW will execute RTS. */
+ /* We choose only one protection mode to execute */
+ SET_TX_DESC_RTS_ENABLE(pdesc, ((ptcb_desc->rts_enable &&
+ !ptcb_desc->cts_enable) ? 1 : 0));
+ SET_TX_DESC_CTS_ENABLE(pdesc, ((ptcb_desc->cts_enable) ?
+ 1 : 0));
+ SET_TX_DESC_RTS_STBC(pdesc, ((ptcb_desc->rts_stbc) ? 1 : 0));
+
+ SET_TX_DESC_RTS_RATE(pdesc, ptcb_desc->rts_rate);
+ SET_TX_DESC_RTS_BANDWIDTH(pdesc, 0);
+ SET_TX_DESC_RTS_SUB_CARRIER(pdesc, ptcb_desc->rts_sc);
+ SET_TX_DESC_RTS_SHORT(pdesc, ((ptcb_desc->rts_rate <=
+ DESC92_RATE54M) ?
+ (ptcb_desc->rts_use_shortpreamble ? 1 : 0)
+ : (ptcb_desc->rts_use_shortgi ? 1 : 0)));
+
+
+ /* Set Bandwidth and sub-channel settings. */
+ if (bw_40) {
+ if (ptcb_desc->packet_bw) {
+ SET_TX_DESC_TX_BANDWIDTH(pdesc, 1);
+ /* use duplicated mode */
+ SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0);
+ } else {
+ SET_TX_DESC_TX_BANDWIDTH(pdesc, 0);
+ SET_TX_DESC_TX_SUB_CARRIER(pdesc,
+ mac->cur_40_prime_sc);
+ }
+ } else {
+ SET_TX_DESC_TX_BANDWIDTH(pdesc, 0);
+ SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0);
+ }
+
+ /*DWORD 1*/
+ SET_TX_DESC_RA_BRSR_ID(pdesc, ptcb_desc->ratr_index);
+
+ /* Fill security related */
+ if (info->control.hw_key) {
+ struct ieee80211_key_conf *keyconf;
+
+ keyconf = info->control.hw_key;
+ switch (keyconf->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ SET_TX_DESC_SEC_TYPE(pdesc, 0x1);
+ break;
+ case WLAN_CIPHER_SUITE_TKIP:
+ SET_TX_DESC_SEC_TYPE(pdesc, 0x2);
+ break;
+ case WLAN_CIPHER_SUITE_CCMP:
+ SET_TX_DESC_SEC_TYPE(pdesc, 0x3);
+ break;
+ default:
+ SET_TX_DESC_SEC_TYPE(pdesc, 0x0);
+ break;
+
+ }
+ }
+
+ /* Set Packet ID */
+ SET_TX_DESC_PACKET_ID(pdesc, 0);
+
+ /* We will assign magement queue to BK. */
+ SET_TX_DESC_QUEUE_SEL(pdesc, fw_qsel);
+
+ /* Alwasy enable all rate fallback range */
+ SET_TX_DESC_DATA_RATE_FB_LIMIT(pdesc, 0x1F);
+
+ /* Fix: I don't kown why hw use 6.5M to tx when set it */
+ SET_TX_DESC_USER_RATE(pdesc,
+ ptcb_desc->use_driver_rate ? 1 : 0);
+
+ /* Set NON_QOS bit. */
+ if (!ieee80211_is_data_qos(fc))
+ SET_TX_DESC_NON_QOS(pdesc, 1);
+
+ }
+
+ _rtl_fill_usb_tx_desc(pdesc);
+ //_rtl_tx_desc_checksum(pdesc);
+
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE, "\n");
+}
+
+void rtl92su_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
+ bool firstseg, bool lastseg, struct sk_buff *skb)
+{
+ //struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_tcb_desc *tcb_desc = (struct rtl_tcb_desc *)(skb->cb);
+
+ memset((void *)pdesc, 0, RTL_TX_HEADER_SIZE);
+
+ /* This bit indicate this packet is used for FW download. */
+ if (tcb_desc->cmd_or_init == DESC_PACKET_TYPE_INIT) {
+ /* For firmware downlaod we only need to set LINIP */
+ SET_TX_DESC_LINIP(pdesc, tcb_desc->last_inipkt);
+
+ /* 92SE must set as 1 for firmware download HW DMA error */
+ //SET_TX_DESC_FIRST_SEG(pdesc, 1);
+ //SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+ /* 92SE need not to set TX packet size when firmware download */
+ SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len) -
+ RTL_TX_HEADER_SIZE);
+
+ //SET_TX_DESC_OWN(pdesc, 1);
+ } else { /* H2C Command Desc format (Host TXCMD) */
+ /* 92SE must set as 1 for firmware download HW DMA error */
+ SET_TX_DESC_FIRST_SEG(pdesc, 1);
+ SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+ SET_TX_DESC_OFFSET(pdesc, 0x20);
+
+ /* Buffer size + command header */
+ SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len) -
+ RTL_TX_HEADER_SIZE);
+ /* Fixed queue of H2C command */
+ SET_TX_DESC_QUEUE_SEL(pdesc, 0x13);
+
+ //SET_BITS_TO_LE_4BYTE(skb->data, 24, 7, rtlhal->h2c_txcmd_seq);
+
+ SET_TX_DESC_OWN(pdesc, 1);
+
+ }
+}
+
+void rtl8192s_tx_cleanup(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+}
+
+int rtl8192s_tx_post_hdl(struct ieee80211_hw *hw, struct urb *urb,
+ struct sk_buff *skb)
+{
+ return 0;
+}
+
+struct sk_buff *rtl8192s_tx_aggregate_hdl(struct ieee80211_hw *hw,
+ struct sk_buff_head *list)
+{
+ return skb_dequeue(list);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192su/trx.h b/drivers/net/wireless/rtlwifi/rtl8192su/trx.h
new file mode 100644
index 0000000..bb5859e
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192su/trx.h
@@ -0,0 +1,59 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_TRX_H__
+#define __REALTEK_PCI92SE_TRX_H__
+
+#define RTL92S_USB_BULK_IN_NUM 1
+#define RTL92S_NUM_RX_URBS 8
+
+#define RTL92S_SIZE_MAX_RX_BUFFER 30720
+#define RX_DRV_INFO_SIZE_UNIT 8
+
+int rtl8192su_endpoint_mapping(struct ieee80211_hw *hw);
+u16 rtl8192su_mq_to_hwq(__le16 fc, u16 mac80211_queue_index);
+bool rtl92su_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
+ struct ieee80211_rx_status *rx_status, u8 *pdesc,
+ struct sk_buff *skb);
+void rtl8192su_rx_hdl(struct ieee80211_hw *hw, struct sk_buff * skb);
+void rtl8192s_tx_cleanup(struct ieee80211_hw *hw, struct sk_buff *skb);
+int rtl8192s_tx_post_hdl(struct ieee80211_hw *hw, struct urb *urb,
+ struct sk_buff *skb);
+struct sk_buff *rtl8192s_tx_aggregate_hdl(struct ieee80211_hw *,
+ struct sk_buff_head *);
+void rtl92su_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+ u8 *pdesc, struct ieee80211_tx_info *info,
+ struct sk_buff *skb, u8 hw_queue,
+ struct rtl_tcb_desc *ptcb_desc);
+void rtl92su_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc, bool firstseg,
+ bool lastseg, struct sk_buff *skb);
+void rtl92su_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+u32 rtl92su_get_desc(u8 *pdesc, bool istx, u8 desc_name);
+void rtl92su_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
+
+#endif
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
