>From 750c8403c86edc794999de6330ee7390f923cf6a Mon Sep 17 00:00:00 2001
From: Joshua Roys <Joshua.Roys@xxxxxxxxxxxxxxx>
Date: Thu, 3 May 2012 00:12:48 -0400
Subject: [PATCH 4/9] rtlwifi: fix the selection of the bulk in endpoint
The endpoint number is not always the same as the number of bulk in
endpoints. I don't actually have a CU card, but I can only assume
that the bulk in endpoint number is 1.
Signed-off-by: Joshua Roys <Joshua.Roys@xxxxxxxxxxxxxxx>
---
drivers/net/wireless/rtlwifi/rtl8192cu/trx.c | 2 ++
drivers/net/wireless/rtlwifi/usb.c | 1 -
2 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
index 9e01f96..32dc884 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
@@ -203,7 +203,9 @@ err_out:
int rtl8192cu_endpoint_mapping(struct ieee80211_hw *hw)
{
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_usb *rtlusb = rtl_usbdev(usb_priv);
int error = 0;
+ rtlusb->in_ep = 0x01;
if (likely(IS_NORMAL_CHIP(rtlhal->version)))
error = _ConfigVerNOutEP(hw);
else
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 91969ee..88dbef0 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -302,7 +302,6 @@ static int _rtl_usb_init_rx(struct ieee80211_hw *hw)
rtlusb->rx_max_size = rtlpriv->cfg->usb_interface_cfg->rx_max_size;
rtlusb->rx_urb_num = rtlpriv->cfg->usb_interface_cfg->rx_urb_num;
- rtlusb->in_ep = rtlpriv->cfg->usb_interface_cfg->in_ep_num;
rtlusb->usb_rx_hdl = rtlpriv->cfg->usb_interface_cfg->usb_rx_hdl;
rtlusb->usb_rx_segregate_hdl =
rtlpriv->cfg->usb_interface_cfg->usb_rx_segregate_hdl;
--
1.7.7.6
