Search Linux Wireless

Re: wlan0 not present

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



OK, that was the firmware I had tried before. I deleted it because it did not work, too.

Here is the output you wanted:
# ls /lib/firmware/iwlwifi-6000*
/lib/firmware/iwlwifi-6000g2a-5.ucode

After copying the firmware there again and rebooting dmesg looks like this:
# dmesg | grep iwl
iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlwifi 0000:02:00.0: setting latency timer to 64
iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:02:00.0: pci_resource_base = f2478000
iwlwifi 0000:02:00.0: HW Revision ID = 0x34
iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X
iwlwifi 0000:02:00.0: ea4b7e1c

Still no wlan0 for me...

Full dmesg:
# dmesg
Reserving virtual address space above 0xff400000
Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
Xen-provided machine memory map:
 BIOS: 0000000000000000 - 000000000009a800 (usable)
 BIOS: 000000000009a800 - 00000000000a0000 (reserved)
 BIOS: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS: 0000000000100000 - 0000000020000000 (usable)
 BIOS: 0000000020000000 - 0000000020200000 (reserved)
 BIOS: 0000000020200000 - 0000000040000000 (usable)
 BIOS: 0000000040000000 - 0000000040200000 (reserved)
 BIOS: 0000000040200000 - 00000000caa25000 (usable)
 BIOS: 00000000caa25000 - 00000000caa69000 (reserved)
 BIOS: 00000000caa69000 - 00000000cadb7000 (usable)
 BIOS: 00000000cadb7000 - 00000000cade7000 (reserved)
 BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS)
 BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data)
 BIOS: 00000000cafff000 - 00000000cb000000 (usable)
 BIOS: 00000000cb800000 - 00000000cfa00000 (reserved)
 BIOS: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved)
 BIOS: 0000000100000000 - 000000022e000000 (usable)
Xen-provided physical RAM map:
 Xen: 0000000000000000 - 000000002f800000 (usable)
DMI 2.6 present.
last_pfn = 0x2f800 max_arch_pfn = 0x10000000
initial memory mapped : 0 - 00000000
init_memory_mapping: 0000000000000000-000000002f800000
NX (Execute Disable) protection: active
 0000000000 - 002f800000 page 4k
kernel direct mapping tables up to 2f800000 @ e4e000-fcf000
RAMDISK: 005f9000 - 00d80e00
ACPI: RSDP 000fe300 00024 (v02 DELL  )
ACPI: XSDT caffde18 0007C (v01 DELL    CBX3    06222004 MSFT 00010013)
ACPI: FACP caf87d98 000F4 (v04 DELL    CBX3    06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486)
ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
ACPI: FACS cafe4e40 00040
ACPI: APIC caffcf18 000CC (v02 DELL    CBX3    06222004 MSFT 00010013)
ACPI: TCPA cafe5d18 00032 (v02                 00000000      00000000)
ACPI: SSDT caf88a98 002F9 (v01 DELLTP      TPM 00003000 INTL 20090903)
ACPI: MCFG cafe5c98 0003C (v01 DELL   SNDYBRDG 06222004 MSFT 00000097)
ACPI: HPET cafe5c18 00038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
ACPI: BOOT cafe5b98 00028 (v01 DELL   CBX3     06222004 AMI  00010013)
ACPI: SSDT caf6c018 00888 (v01  PmRef  Cpu0Ist 00003000 INTL 20090903)
ACPI: SSDT caf6b018 00996 (v01  PmRef    CpuPm 00003000 INTL 20090903)
ACPI: XMAR caf87c18 000E8 (v01 INTEL      SNB  00000001 INTL 00000001)
ACPI: SLIC caf75c18 00176 (v03 DELL    CBX3    06222004 MSFT 00010013)
0MB HIGHMEM available.
760MB LOWMEM available.
  mapped low ram: 0 - 2f800000
  low ram: 0 - 2f800000
  node 0 low ram: 00000000 - 2f000000
  node 0 bootmap 00000000 - 00005e00
(5 early reservations) ==> bootmem [0000000000 - 002f000000]
  #0 [0000100000 - 00005d8284]    TEXT DATA BSS ==> [0000100000 - 00005d8284]
  #1 [00005f9000 - 0000e4e000]     Xen provided ==> [00005f9000 - 0000e4e000]
  #2 [00005d9000 - 00005d91b3]              BRK ==> [00005d9000 - 00005d91b3]
  #3 [0000e4e000 - 0000fc4000]          PGTABLE ==> [0000e4e000 - 0000fc4000]
  #4 [0000000000 - 0000006000]          BOOTMAP ==> [0000000000 - 0000006000]
found SMP MP-table at [ff3eca70] 000f1a70
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0002f800
  HighMem  0x0002f800 -> 0x0002f800
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0002f000
    0: 0x0002f800 -> 0x0002f800
On node 0 totalpages: 192512
free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1488 pages used for memmap
  Normal zone: 186928 pages, LIFO batch:31
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536
pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190992
Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Software IO TLB enabled: 
 Aperture:     64 megabytes
 Address size: 28 bits
 Kernel range: c17b2000 - c57b2000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xff077000 - 0xff3ff000   (3616 kB)
    pkmap   : 0xfec00000 - 0xfee00000   (2048 kB)
    vmalloc : 0xf0000000 - 0xfebfe000   ( 235 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
      .init : 0xc04f7000 - 0xc0546000   ( 316 kB)
      .data : 0xc0387d67 - 0xc04f66f8   (1466 kB)
      .text : 0xc0100000 - 0xc0387d67   (2591 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2048
Extended CMOS year: 2000
Xen reported: 2793.780 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
mce: CPU supports 7 MCE banks
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
Initializing CPU#3
Grant table version 2
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
_OSC invalid UUID
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f]
pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7]
pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff]
pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7]
pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3]
pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7]
pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3]
pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff]
pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-08]
pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff]
pci 0000:00:1c.3: PCI bridge to [bus 09-09]
pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff]
pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff]
pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff]
pci 0000:0a:00.1: supports D1 D2
pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.1: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
_OSC invalid UUID
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
xen_mem: Initialising balloon driver.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0x1000-0x100f has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0x400-0x47f has been reserved
system 00:05: ioport range 0x500-0x57f has been reserved
system 00:05: ioport range 0x164e-0x164f has been reserved
system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved
system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0c: iomem range 0x20000000-0x201fffff has been reserved
system 00:0c: iomem range 0x40000000-0x401fffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xe2d00000-0xe2dfffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2:   IO window: 0x3000-0x3fff
pci 0000:00:1c.2:   MEM window: 0xe2200000-0xe2bfffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000e0a00000-0x000000e13fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
pci 0000:00:1c.3:   MEM window: 0xe1800000-0xe21fffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000e0000000-0x000000e09fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a
pci 0000:00:1c.5:   IO window: disabled
pci 0000:00:1c.5:   MEM window: 0xe2c00000-0xe2cfffff
pci 0000:00:1c.5:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff]
pci_bus 0000:03: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff]
pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff]
pci_bus 0000:09: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff]
pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff]
pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7711k freed
Simple Boot Flag at 0xf3 set to 0x1
MCE: bind virq for DOM0 logging
MCE_DOM0_LOG: enter dom0 mce vIRQ handler
MCE_DOM0_LOG: No more urgent data
MCE_DOM0_LOG: No more nonurgent data
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 379
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k
vesafb: mode is 640x480x16, linelength=1280, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
floppy0: Unable to grab DMA2 for the floppy driver
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Xen virtual console successfully installed as hvc0
Event-channel device installed.
blktap_device_init: blktap device major 253
blktap_ring_init: blktap ring major: 253
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 17
registered taskstats version 1
input: AT Translated Set 2 keyboard as /class/input/input0
PCI IO multiplexer device installed.
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 316k freed
Console: switching to colour frame buffer device 80x30
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279
ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279
ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279
ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279
input: PS/2 Generic Mouse as /class/input/input1
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST9500423AS      0002 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.4: new full speed USB device using ehci_hcd and address 3
usb 1-1.4: configuration #1 chosen from 1 choice
usb 1-1.5: new high speed USB device using ehci_hcd and address 4
usb 1-1.5: configuration #1 chosen from 1 choice
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GU60N    A102 PQ: 0 ANSI: 5
usb 2-1.8: new full speed USB device using ehci_hcd and address 3
usb 2-1.8: configuration #0 chosen from 1 choice
usb 2-1.8: config 0 descriptor??
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
kjournald starting.  Commit interval 15 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input2
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI
e1000e: Copyright(c) 1999 - 2010 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
parport_pc 00:08: activated
parport_pc 00:08: reported by Plug and Play ACPI
parport_pc 00:08: disabled
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: SSDT cadd7798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
ACPI: SSDT cadd8a98 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
ACPI: SSDT cadd6d98 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /class/input/input4
ACPI: Power Button [PBTN]
input: Sleep Button as /class/input/input5
ACPI: Sleep Button [SBTN]
input: Power Button as /class/input/input6
ACPI: Power Button [PWRF]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Compat-wireless backport release: compat-wireless-v3.4-rc1-2
Backport based on linux-stable.git v3.4-rc1
cfg80211: Calling CRDA to update world regulatory domain
ACPI: AC Adapter [AC] (on-line)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlwifi 0000:02:00.0: setting latency timer to 64
iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:02:00.0: pci_resource_base = f2478000
iwlwifi 0000:02:00.0: HW Revision ID = 0x34
iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X
acpi device:37: registered as cooling_device8
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
Non-volatile memory driver v1.3
lp: driver loaded but no devices found
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on sda1, internal journal
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Adding 524280k swap on /var/swap/swap.001.  Priority:-1 extents:137 across:637248k 
Microcode Update Driver: v2.00-xen <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
Microcode Update Driver: v2.00-xen removed.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (12157 buckets, 48628 max)
e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X
e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X
802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
All bugs added by David S. Miller <davem@xxxxxxxxxx>
device xenbr0 entered promiscuous mode
device eth0 entered promiscuous mode
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
warning: `ntpdate' uses 32-bit capabilities (legacy support in use)
suspend: event channel 38
kjournald starting.  Commit interval 15 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
iwlwifi 0000:02:00.0: ea4b7e1c
iwlwifi 0000:02:00.0: ca253e1c
iwlwifi 0000:02:00.0: ca253de8
iwlwifi 0000:02:00.0: PCI INT A disabled


Am 18.04.2012 um 18:37 schrieb Emmanuel Grumbach:

> On Wed, Apr 18, 2012 at 17:39, Dominik Feser
> <dominik.feser@xxxxxxxxxxxxxx> wrote:
>> There it is:
>> 
>> # lspci -x -s 02:00
>> 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)
>> 00: 86 80 82 00 02 00 10 00 34 00 80 02 10 00 00 00
>> 10: 04 00 d0 e2 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 21 13
>> 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00
>> 
> 
> Ok, you need a fw whose name is iwlwifi-6000g2a-*
> 
> can you send the output of
> 
> ls /lib/firmware iwlwifi-6000g2a-*
> 
> 
> thanks

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux