Search Linux Wireless

Re: Kernel panic with brcm4313 (kernel 3.2.2)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/04/12 13:52, Arend van Spriel wrote:
On 04/17/2012 02:24 PM, Frank Kingswood wrote:
Hi Arend,
I noticed in some log you sent that your regulatory domain is set to
GB, which makes sense. I submitted a patch [1] last week so could you
try that and let me know the results.
[re-sending as plain text]

Thanks for the update. Yes, my AP is on channel 13 so might be affected
by this.

That line is in brcms_c_wait_for_tx_completion()

main.c,8006 WARN_ON_ONCE(timeout == 0);

Would using another channel be any different for this?


I actually did not expect that warning to come up with the patch in place. So if you can try another channel in 1-11 range and let me know the result, I might be able to make some sense of it all.
Sorry, I misremembered.
It was already on channel 11, but it had 20/40 MHz bandwidth selected with channel 9 as the extension channel. That might have been OK on channel 13, but I think these two overlap.

Also I'm not sure if this is a standard mode, so I've turned it to just 802.11n+g mode, with 20MHz BW on channel 7 now. Output from "iw dev wlan0 scan" for reference.

Attempting to connect with NM no longer gives the kernel warning, but stull no luck.

BSS 00:22:57:xx:xx:xx (on wlan0)
    TSF: 1796346187 usec (0d, 00:29:56)
    freq: 2442
    beacon interval: 333
    capability: ESS Privacy ShortSlotTime (0x0411)
    signal: -44.00 dBm
    last seen: 476 ms ago
    SSID: xxxxxxxxxxxx
    Supported rates: 1.0* 2.0* 5.5* 11.0* 9.0 18.0 36.0 54.0
    DS Parameter set: channel 7
    Extended supported rates: 6.0 12.0 24.0 48.0
    Country: GB    Environment: Indoor/Outdoor
        Channels [1 - 11] @ 16 dBm
    TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x0
    ERP: Barker_Preamble_Mode
    HT capabilities:
        Capabilities: 0x1ec
            HT20
            SM Power Save disabled
            RX HT20 SGI
            RX HT40 SGI
            TX STBC
            RX STBC 1-stream
            Max AMSDU length: 3839 bytes
            No DSSS/CCK HT40
        Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
        Minimum RX AMPDU time spacing: 4 usec (0x05)
        HT RX MCS rate indexes supported: 0-15
        HT TX MCS rate indexes are undefined
    HT operation:
         * primary channel: 7
         * secondary channel offset: no secondary
         * STA channel width: 20 MHz
         * RIFS: 0
         * HT protection: non-HT mixed
         * non-GF present: 1
         * OBSS non-GF present: 0
         * dual beacon: 0
         * dual CTS protection: 0
         * STBC beacon: 0
         * L-SIG TXOP Prot: 0
         * PCO active: 0
         * PCO phase: 0
    Extended capabilities: HT Information Exchange Supported
    RSN:     * Version: 1
         * Group cipher: CCMP
         * Pairwise ciphers: CCMP
         * Authentication suites: PSK
         * Capabilities: PreAuth (0x0001)
    WMM:     * Parameter version 1
         * BE: CW 15-1023, AIFSN 3
         * BK: CW 15-1023, AIFSN 7
         * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
         * VO: acm CW 3-7, AIFSN 2, TXOP 1504 usec

Frank
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux