Hi Joyce, On 03/27/2012 10:36 AM, Joyce Chain wrote: > I have to try compile ath6kl on Linux Kernel 3.0.8 for out target. > The compile options are CONFIG_ATH6K_LEGACY=Y, CONFIG_MMC=y, > CONFIG_WLAN=y, CONFIG_CFG80211=y. > And copy binary files(bdata.SD31.bin, bdata.SD32.bin, bdata.WB31.bin, > data.patch.bin, endpointping.bin, fw-2.bin, otp.bin) to [Linux > Kernel]/firmware/ath6k/AR6003/hw2.1.1/. > But the execute results are as below on out target: > > mmc1: queuing unknown CIS tuple 0x80 (1 bytes) > mmc1: queuing unknown CIS tuple 0x81 (1 bytes) > mmc1: queuing unknown CIS tuple 0x82 (1 bytes) > mmc1: new high speed SDIO card at address 0001 > AR6000: Unsupported configuration opcode: 3 > AR6000: Unsupported configuration opcode: 3 > HIF Interrupt processing is SYNC ONLY > AR6000: Unsupported configuration opcode: 7 > AR6000: Unsupported configuration opcode: 5 > In aggr_init.. > going out of aggr_init..status OK > baud = 0x0001C200 > quot = 0x00030068 > -E- SdioHost_WaitTransfer timeout : 1 > -E- McardC=10202, McSdC=5db5, McSdArg=941fb824, McSdIc=1, McSdOp=0 > -E- SDIO fail in CMD-53 > [DMA] CurAddr f4d8024 StartAddr f4d8000 MC_DMARL 800009 > dwTimeOut 0x3000000 > AR6000: SDIO bus operation failed! MMC stack returned : -2 > Unable to send the BMI data to the device > Unable to write to the device > BMI operation failed: 1134 > ar6000_avail: ar6000_sysfs_bmi_get_config failed You are still using the old version of ath6kl from staging. But it seems that there's a problem with the SDIO bus, I just don't know what as I have forgotten almost everything from the staging version. If you want to try the "new" ath6kl you need to install compat-wireless on your device. But I don't know if that will work any better. Kalle -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
