Hi all
We have a new board using the wl1271. As long as I keep it busy,
everything is fine. But once it becomes idle I get,
"wl12xx: ERROR watchdog interrupt received! starting recovery."
Has this been seen by others?
I'm using compat-wireless-2012-01-26 and my kernel is based on 3.0
Other relevant log messages:
cfg80211: Calling CRDA to update world regulatory domain
add wake up source irq 108
wl12xx: loaded
wl12xx: firmware booted (Rev 6.3.0.0.77)
wlan0: authenticate with 00:12:17:31:67:e7 (try 1)
wlan0: authenticated
wlan0: associate with 00:12:17:31:67:e7 (try 1)
wlan0: RX AssocResp from 00:12:17:31:67:e7 (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: moving STA 00:12:17:31:67:e7 to state 1
wlan0: moving STA 00:12:17:31:67:e7 to state 2
wlan0: moving STA 00:12:17:31:67:e7 to state 3
wl12xx: Association completed.
.......
wl12xx: ERROR watchdog interrupt received! starting recovery.
wl12xx: Reading FW panic log
wl12xx: ERROR command complete timeout
------------[ cut here ]------------
WARNING: at
/home/tkisky/compat-wireless-2012-01-26/drivers/net/wireless/wl12xx/cmd.c:108
wl1271_cmd_send+0x378/0x3d0 [wl12xx]()
Modules linked in: wl12xx mac80211 cfg80211 wl12xx_sdio ov5642_camera
[<800416f8>] (unwind_backtrace+0x0/0xfc) from [<80064074>]
(warn_slowpath_common+0x54/0x64)
[<80064074>] (warn_slowpath_common+0x54/0x64) from [<800640a0>]
(warn_slowpath_null+0x1c/0x24)
[<800640a0>] (warn_slowpath_null+0x1c/0x24) from [<7f09e080>]
(wl1271_cmd_send+0x378/0x3d0 [wl12xx])
[<7f09e080>] (wl1271_cmd_send+0x378/0x3d0 [wl12xx]) from [<7f09e720>]
(wl12xx_cmd_stop_fwlog+0x54/0x80 [wl12xx])
[<7f09e720>] (wl12xx_cmd_stop_fwlog+0x54/0x80 [wl12xx]) from
[<7f09ce18>] (wl1271_recovery_work+0x220/0x314 [wl12xx])
[<7f09ce18>] (wl1271_recovery_work+0x220/0x314 [wl12xx]) from
[<80079b90>] (process_one_work+0x10c/0x408)
[<80079b90>] (process_one_work+0x10c/0x408) from [<8007a228>]
(worker_thread+0x19c/0x470)
[<8007a228>] (worker_thread+0x19c/0x470) from [<8008071c>]
(kthread+0x8c/0x90)
[<8008071c>] (kthread+0x8c/0x90) from [<8003c474>]
(kernel_thread_exit+0x0/0x8)
---[ end trace b6d18e2d5294f64d ]---
wl12xx: ERROR failed to send stop firmware logger command
wl12xx: Hardware recovery in progress. FW ver: Rev 6.3.0.0.77 pc: 0x23923
wl12xx: down
ieee80211 phy0: Hardware restart was requested
mmc2: Timeout waiting for hardware interrupt.
sdhci: =========== REGISTER DUMP (mmc2)===========
sdhci: Sys addr: 0x4a3b1ae8 | Version: 0x00000003
sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci: Argument: 0x26ff8804 | Trn mode: 0x00000000
sdhci: Present: 0xfff9820e | Host ctl: 0x000000de
sdhci: Power: 0x0000000b | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x0000007f
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x007f000b | Sig enab: 0x007f000b
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
sdhci: Caps: 0x07f30000 | Caps_1: 0x00000007
sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff
sdhci: Host ctl2: 0x00000088
sdhci: ===========================================
wl1271_sdio mmc2:0001:2: sdio read failed (-110)
wl1271_sdio mmc2:0001:2: sdio write failed (-84)
mmc2: Timeout waiting for hardware interrupt.
sdhci: =========== REGISTER DUMP (mmc2)===========
sdhci: Sys addr: 0x4a3b1ae8 | Version: 0x00000003
sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci: Argument: 0x279c6804 | Trn mode: 0x00000000
sdhci: Present: 0xfff9820e | Host ctl: 0x000000de
sdhci: Power: 0x0000000b | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x0000007f
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x007f000b | Sig enab: 0x007f000b
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
sdhci: Caps: 0x07f30000 | Caps_1: 0x00000007
sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff
sdhci: Host ctl2: 0x00000088
sdhci: ===========================================
wl1271_sdio mmc2:0001:2: sdio read failed (-110)
wl12xx: ERROR chip id doesn't match after firmware boot
mmc2: Timeout waiting for hardware interrupt.
sdhci: =========== REGISTER DUMP (mmc2)===========
sdhci: Sys addr: 0x4a3b1ae8 | Version: 0x00000003
sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci: Argument: 0x24ace804 | Trn mode: 0x00000000
sdhci: Present: 0xfff9820e | Host ctl: 0x000000de
sdhci: Power: 0x0000000b | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x0000007f
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x007f000b | Sig enab: 0x007f000b
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
sdhci: Caps: 0x07f30000 | Caps_1: 0x00000007
sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff
sdhci: Host ctl2: 0x00000088
sdhci: ===========================================
wl1271_sdio mmc2:0001:2: sdio read failed (-110)
wl12xx: WARNING unsupported chip id: 0x1
mmc2: Timeout waiting for hardware interrupt.
sdhci: =========== REGISTER DUMP (mmc2)===========
sdhci: Sys addr: 0x4a3b1ae8 | Version: 0x00000003
sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci: Argument: 0x24ace804 | Trn mode: 0x00000000
sdhci: Present: 0xfff9820e | Host ctl: 0x000000de
sdhci: Power: 0x0000000b | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x0000007f
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x007f000b | Sig enab: 0x007f000b
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
sdhci: Caps: 0x07f30000 | Caps_1: 0x00000007
sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff
sdhci: Host ctl2: 0x00000088
sdhci: ===========================================
wl1271_sdio mmc2:0001:2: sdio read failed (-110)
wl12xx: WARNING unsupported chip id: 0x1
wl12xx: ERROR firmware boot failed despite 3 retries
ieee80211 phy0: failed to set key (0, ff:ff:ff:ff:ff:ff) to hardware (-11)
____________________________________________
I've tried the latest compat-wireless, but it gets an error after
association is completed.
Here's the messages with compat-wireless-2012-03-18;
Any tips appreciated.
Thanks
Troy
*************************************************************************
cfg80211: Calling CRDA to update world regulatory domain
add wake up source irq 108
wl12xx: loaded
wl12xx: firmware booted (Rev 6.3.5.0.98)
wlan0: authenticate with 00:12:17:31:67:e7
wlan0: send auth to 00:12:17:31:67:e7 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:12:17:31:67:e7 (try 1/3)
wlan0: RX AssocResp from 00:12:17:31:67:e7 (capab=0x411 status=0 aid=3)
wlan0: associated
wl12xx: ERROR command complete timeout
------------[ cut here ]------------
WARNING: at
/home/tkisky/compat-wireless-2012-03-18/drivers/net/wireless/wl12xx/cmd.c:108
wl1271_cmd_send+0x378/0x3d0 [wl12xx]()
Modules linked in: wl12xx mac80211 cfg80211 wl12xx_sdio compat ov5642_camera
[<800416f8>] (unwind_backtrace+0x0/0xfc) from [<80064074>]
(warn_slowpath_common+0x54/0x64)
[<80064074>] (warn_slowpath_common+0x54/0x64) from [<800640a0>]
(warn_slowpath_null+0x1c/0x24)
[<800640a0>] (warn_slowpath_null+0x1c/0x24) from [<7f0aa1fc>]
(wl1271_cmd_send+0x378/0x3d0 [wl12xx])
[<7f0aa1fc>] (wl1271_cmd_send+0x378/0x3d0 [wl12xx]) from [<7f0abb3c>]
(wl1271_cmd_configure+0x38/0x60 [wl12xx])
[<7f0abb3c>] (wl1271_cmd_configure+0x38/0x60 [wl12xx]) from [<7f0b0afc>]
(wl1271_acx_set_ht_capabilities+0x80/0xd4 [wl12xx])
[<7f0b0afc>] (wl1271_acx_set_ht_capabilities+0x80/0xd4 [wl12xx]) from
[<7f0a64c8>] (wl1271_op_bss_info_changed+0x7c8/0x10ec [wl12xx])
[<7f0a64c8>] (wl1271_op_bss_info_changed+0x7c8/0x10ec [wl12xx]) from
[<7f057b10>] (ieee80211_bss_info_change_notify+0xd4/0x1ac [mac80211])
[<7f057b10>] (ieee80211_bss_info_change_notify+0xd4/0x1ac [mac80211])
from [<7f07c9d4>] (ieee80211_assoc_success+0x360/0x5cc [mac80211])
[<7f07c9d4>] (ieee80211_assoc_success+0x360/0x5cc [mac80211]) from
[<7f07cd94>] (ieee80211_rx_mgmt_assoc_resp+0x154/0x26c [mac80211])
[<7f07cd94>] (ieee80211_rx_mgmt_assoc_resp+0x154/0x26c [mac80211]) from
[<7f07d698>] (ieee80211_sta_rx_queued_mgmt+0xc0/0x518 [mac80211])
[<7f07d698>] (ieee80211_sta_rx_queued_mgmt+0xc0/0x518 [mac80211]) from
[<7f065824>] (ieee80211_iface_work+0x1c4/0x2cc [mac80211])
[<7f065824>] (ieee80211_iface_work+0x1c4/0x2cc [mac80211]) from
[<80079b90>] (process_one_work+0x10c/0x408)
[<80079b90>] (process_one_work+0x10c/0x408) from [<8007a228>]
(worker_thread+0x19c/0x470)
[<8007a228>] (worker_thread+0x19c/0x470) from [<8008071c>]
(kthread+0x8c/0x90)
[<8008071c>] (kthread+0x8c/0x90) from [<8003c474>]
(kernel_thread_exit+0x0/0x8)
---[ end trace 211b9f291393445e ]---
wl12xx: WARNING CONFIGURE command NOK
wl12xx: WARNING acx ht capabilities setting failed: -110
wl12xx: WARNING Set ht cap false failed -110
wl12xx: ERROR watchdog interrupt received! starting recovery.
wl12xx: ERROR command complete timeout
------------[ cut here ]------------
WARNING: at
/home/tkisky/compat-wireless-2012-03-18/drivers/net/wireless/wl12xx/cmd.c:108
wl1271_cmd_send+0x378/0x3d0 [wl12xx]()
Modules linked in: wl12xx mac80211 cfg80211 wl12xx_sdio compat ov5642_camera
[<800416f8>] (unwind_backtrace+0x0/0xfc) from [<80064074>]
(warn_slowpath_common+0x54/0x64)
[<80064074>] (warn_slowpath_common+0x54/0x64) from [<800640a0>]
(warn_slowpath_null+0x1c/0x24)
[<800640a0>] (warn_slowpath_null+0x1c/0x24) from [<7f0aa1fc>]
(wl1271_cmd_send+0x378/0x3d0 [wl12xx])
[<7f0aa1fc>] (wl1271_cmd_send+0x378/0x3d0 [wl12xx]) from [<7f0ab1cc>]
(wl12xx_cmd_set_default_wep_key+0x80/0xb0 [wl12xx])
[<7f0ab1cc>] (wl12xx_cmd_set_default_wep_key+0x80/0xb0 [wl12xx]) from
[<7f0a5180>] (wl1271_set_key+0x2ec/0x3e4 [wl12xx])
[<7f0a5180>] (wl1271_set_key+0x2ec/0x3e4 [wl12xx]) from [<7f0a53c0>]
(wl1271_op_set_key+0x148/0x2d0 [wl12xx])
[<7f0a53c0>] (wl1271_op_set_key+0x148/0x2d0 [wl12xx]) from [<7f074de4>]
(ieee80211_key_enable_hw_accel+0xd4/0x1b4 [mac80211])
[<7f074de4>] (ieee80211_key_enable_hw_accel+0xd4/0x1b4 [mac80211]) from
[<7f075350>] (ieee80211_key_link+0xa4/0x13c [mac80211])
[<7f075350>] (ieee80211_key_link+0xa4/0x13c [mac80211]) from
[<7f06c654>] (ieee80211_add_key+0xc0/0x140 [mac80211])
[<7f06c654>] (ieee80211_add_key+0xc0/0x140 [mac80211]) from [<7f025198>]
(cfg80211_upload_connect_keys+0xb0/0x654 [cfg80211])
[<7f025198>] (cfg80211_upload_connect_keys+0xb0/0x654 [cfg80211]) from
[<7f03ce98>] (__cfg80211_connect_result+0x1e8/0x330 [cfg80211])
[<7f03ce98>] (__cfg80211_connect_result+0x1e8/0x330 [cfg80211]) from
[<7f03abb0>] (cfg80211_send_rx_assoc+0x104/0x12c [cfg80211])
[<7f03abb0>] (cfg80211_send_rx_assoc+0x104/0x12c [cfg80211]) from
[<7f07d77c>] (ieee80211_sta_rx_queued_mgmt+0x1a4/0x518 [mac80211])
[<7f07d77c>] (ieee80211_sta_rx_queued_mgmt+0x1a4/0x518 [mac80211]) from
[<7f065824>] (ieee80211_iface_work+0x1c4/0x2cc [mac80211])
[<7f065824>] (ieee80211_iface_work+0x1c4/0x2cc [mac80211]) from
[<80079b90>] (process_one_work+0x10c/0x408)
[<80079b90>] (process_one_work+0x10c/0x408) from [<8007a228>]
(worker_thread+0x19c/0x470)
[<8007a228>] (worker_thread+0x19c/0x470) from [<8008071c>]
(kthread+0x8c/0x90)
[<8008071c>] (kthread+0x8c/0x90) from [<8003c474>]
(kernel_thread_exit+0x0/0x8)
---[ end trace 211b9f291393445f ]---
wl12xx: WARNING cmd set_default_wep_key failed: -110
wl12xx: ERROR Could not add or replace key
ieee80211 phy0: failed to set key (0, ff:ff:ff:ff:ff:ff) to hardware (-110)
wl12xx: Reading FW panic log
wl12xx: ERROR command complete timeout
------------[ cut here ]------------
WARNING: at
/home/tkisky/compat-wireless-2012-03-18/drivers/net/wireless/wl12xx/cmd.c:108
wl1271_cmd_send+0x378/0x3d0 [wl12xx]()
Modules linked in: wl12xx mac80211 cfg80211 wl12xx_sdio compat ov5642_camera
[<800416f8>] (unwind_backtrace+0x0/0xfc) from [<80064074>]
(warn_slowpath_common+0x54/0x64)
[<80064074>] (warn_slowpath_common+0x54/0x64) from [<800640a0>]
(warn_slowpath_null+0x1c/0x24)
[<800640a0>] (warn_slowpath_null+0x1c/0x24) from [<7f0aa1fc>]
(wl1271_cmd_send+0x378/0x3d0 [wl12xx])
[<7f0aa1fc>] (wl1271_cmd_send+0x378/0x3d0 [wl12xx]) from [<7f0aa8ec>]
(wl12xx_cmd_stop_fwlog+0x54/0x80 [wl12xx])
[<7f0aa8ec>] (wl12xx_cmd_stop_fwlog+0x54/0x80 [wl12xx]) from
[<7f0a8dac>] (wl1271_recovery_work+0x228/0x328 [wl12xx])
[<7f0a8dac>] (wl1271_recovery_work+0x228/0x328 [wl12xx]) from
[<80079b90>] (process_one_work+0x10c/0x408)
[<80079b90>] (process_one_work+0x10c/0x408) from [<8007a228>]
(worker_thread+0x19c/0x470)
[<8007a228>] (worker_thread+0x19c/0x470) from [<8008071c>]
(kthread+0x8c/0x90)
[<8008071c>] (kthread+0x8c/0x90) from [<8003c474>]
(kernel_thread_exit+0x0/0x8)
---[ end trace 211b9f2913934460 ]---
wl12xx: ERROR failed to send stop firmware logger command
wl12xx: Hardware recovery in progress. FW ver: Rev 6.3.5.0.98 pc: 0x9a16
wl12xx: down
ieee80211 phy0: Hardware restart was requested
wl12xx: ERROR timeout waiting for the hardware to complete initialization
wl12xx: ERROR timeout waiting for the hardware to complete initialization
wl12xx: ERROR timeout waiting for the hardware to complete initialization
wl12xx: ERROR firmware boot failed despite 3 retries
------------[ cut here ]------------
WARNING: at
/home/tkisky/compat-wireless-2012-03-18/net/mac80211/util.c:1254
ieee80211_reconfig+0x39c/0x6bc [mac80211]()
Modules linked in: wl12xx mac80211 cfg80211 wl12xx_sdio compat ov5642_camera
[<800416f8>] (unwind_backtrace+0x0/0xfc) from [<80064074>]
(warn_slowpath_common+0x54/0x64)
[<80064074>] (warn_slowpath_common+0x54/0x64) from [<800640a0>]
(warn_slowpath_null+0x1c/0x24)
[<800640a0>] (warn_slowpath_null+0x1c/0x24) from [<7f077f00>]
(ieee80211_reconfig+0x39c/0x6bc [mac80211])
[<7f077f00>] (ieee80211_reconfig+0x39c/0x6bc [mac80211]) from
[<7f05834c>] (ieee80211_restart_work+0x68/0x84 [mac80211])
[<7f05834c>] (ieee80211_restart_work+0x68/0x84 [mac80211]) from
[<80079b90>] (process_one_work+0x10c/0x408)
[<80079b90>] (process_one_work+0x10c/0x408) from [<8007a228>]
(worker_thread+0x19c/0x470)
[<8007a228>] (worker_thread+0x19c/0x470) from [<8008071c>]
(kthread+0x8c/0x90)
[<8008071c>] (kthread+0x8c/0x90) from [<8003c474>]
(kernel_thread_exit+0x0/0x8)
---[ end trace 211b9f2913934461 ]---
------------[ cut here ]------------
WARNING: at
/home/tkisky/compat-wireless-2012-03-18/net/mac80211/util.c:1254
ieee80211_reconfig+0x39c/0x6bc [mac80211]()
Modules linked in: wl12xx mac80211 cfg80211 wl12xx_sdio compat ov5642_camera
[<800416f8>] (unwind_backtrace+0x0/0xfc) from [<80064074>]
(warn_slowpath_common+0x54/0x64)
[<80064074>] (warn_slowpath_common+0x54/0x64) from [<800640a0>]
(warn_slowpath_null+0x1c/0x24)
[<800640a0>] (warn_slowpath_null+0x1c/0x24) from [<7f077f00>]
(ieee80211_reconfig+0x39c/0x6bc [mac80211])
[<7f077f00>] (ieee80211_reconfig+0x39c/0x6bc [mac80211]) from
[<7f05834c>] (ieee80211_restart_work+0x68/0x84 [mac80211])
[<7f05834c>] (ieee80211_restart_work+0x68/0x84 [mac80211]) from
[<80079b90>] (process_one_work+0x10c/0x408)
[<80079b90>] (process_one_work+0x10c/0x408) from [<8007a228>]
(worker_thread+0x19c/0x470)
[<8007a228>] (worker_thread+0x19c/0x470) from [<8008071c>]
(kthread+0x8c/0x90)
[<8008071c>] (kthread+0x8c/0x90) from [<8003c474>]
(kernel_thread_exit+0x0/0x8)
---[ end trace 211b9f2913934462 ]---
------------[ cut here ]------------
WARNING: at
/home/tkisky/compat-wireless-2012-03-18/net/mac80211/util.c:1254
ieee80211_reconfig+0x39c/0x6bc [mac80211]()
Modules linked in: wl12xx mac80211 cfg80211 wl12xx_sdio compat ov5642_camera
[<800416f8>] (unwind_backtrace+0x0/0xfc) from [<80064074>]
(warn_slowpath_common+0x54/0x64)
[<80064074>] (warn_slowpath_common+0x54/0x64) from [<800640a0>]
(warn_slowpath_null+0x1c/0x24)
[<800640a0>] (warn_slowpath_null+0x1c/0x24) from [<7f077f00>]
(ieee80211_reconfig+0x39c/0x6bc [mac80211])
[<7f077f00>] (ieee80211_reconfig+0x39c/0x6bc [mac80211]) from
[<7f05834c>] (ieee80211_restart_work+0x68/0x84 [mac80211])
[<7f05834c>] (ieee80211_restart_work+0x68/0x84 [mac80211]) from
[<80079b90>] (process_one_work+0x10c/0x408)
[<80079b90>] (process_one_work+0x10c/0x408) from [<8007a228>]
(worker_thread+0x19c/0x470)
[<8007a228>] (worker_thread+0x19c/0x470) from [<8008071c>]
(kthread+0x8c/0x90)
[<8008071c>] (kthread+0x8c/0x90) from [<8003c474>]
(kernel_thread_exit+0x0/0x8)
---[ end trace 211b9f2913934463 ]---
ieee80211 phy0: failed to set key (0, ff:ff:ff:ff:ff:ff) to hardware (-11)
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
