On Sun, Mar 11, 2012 at 05:43:26PM +0000, Kamil Grzebien wrote: > I've initialisation problem with my iwl3945 network card in Dell XPS > M1530 laptop. The issue is known and described in couple of bug > reports (eg. http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2143). > There are workarounds but I'd like to solve the problem permanently. > Basically when initializing I get: > > iwl3945 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > iwl3945 0000:0b:00.0: setting latency timer to 64 > iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF > iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF > .... > iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF > iwl3945 0000:0b:00.0: bad EEPROM signature,EEPROM_GP=0x00000007 > iwl3945 0000:0b:00.0: EEPROM not found, EEPROM_GP=0xffffffff It's worth to mansion that this problem happen after wakeup from suspend to ram. > 1. Driver can't initialize card as all ioread32/iowrite32 seems to not > do their job. All reads finalize with 0xffffffff. > > However I can see that: > - pci_iomap(pdev, 0, 0) doesn't return error, > - pci_resource_start(pdev, 0) seems gives correct address (I can > compare it with the one I can see in /proc/iomem). > > If I access the memory directly, not by mapping, I can write and read > pci memory but driver load fails anyway. I don't understand why can't > access using mapped memory. How do you access memory directly ? > 2. If I check BASE_ADDRESS with setpci it doesn't give correct values: > > # setpci -v -s 0b:00.0 BASE_ADDRESS_0 BASE_ADDRESS_1 > 0000:0b:00.0 @10 = 00000000 > 0000:0b:00.0 @14 = 00000000 > > Not sure if it's done by driver itself or it should point correct > values even if the driver wasn't fully loaded. > > Have you got any idea of: > - why IO memory isn't accessible? what could cause that? > - how APIC could change the load process in this particular case? (if > I boot with noapic kernel option it usually works fine) Is this really noapic or maybe noacpi ? ACPI manage PCIe devices. > This issue is reproducible in 100% on my system when I turn on the > machine. It doesn't occur after some work on it. I'd be very happy to > get rid of the issue. > > Could you point some ideas that might be worth checking in driver or > kernel please? I've tried couple of ideas but none worked for me. Would be good to check if pcie bridge is configured correctly after suspend to ram. But I don't know how to do this, that's why we are on linux-pci mailing list :-) Note we have similar bug report, which was actual regression and that problem is already fixed by PCI patch: http://marc.info/?l=linux-kernel&m=132577331232330&w=2 Stanislaw -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
