From: Johannes Berg <johannes.berg@xxxxxxxxx>
No need to have a special config variable
for the PA type, we can just use the
additional NIC config function to config
the hardware correctly.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-6000.c | 17 +++++++++--------
drivers/net/wireless/iwlwifi/iwl-shared.h | 12 ------------
2 files changed, 9 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 1e29a51..6f7d5f0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -96,20 +96,21 @@ static void iwl6150_additional_nic_config(struct iwl_priv *priv)
CSR_GP_DRIVER_REG_BIT_6050_1x2);
}
+static void iwl6000i_additional_nic_config(struct iwl_priv *priv)
+{
+ /* 2x2 IPA phy type */
+ iwl_write32(trans(priv), CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
+}
+
/* NIC configuration for 6000 series */
static void iwl6000_nic_config(struct iwl_priv *priv)
{
iwl_rf_config(priv);
- /* no locking required for register write */
- if (cfg(priv)->pa_type == IWL_PA_INTERNAL) {
- /* 2x2 IPA phy type */
- iwl_write32(trans(priv), CSR_GP_DRIVER_REG,
- CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
- }
/* do additional nic configuration if needed */
if (cfg(priv)->additional_nic_config)
- cfg(priv)->additional_nic_config(priv);
+ cfg(priv)->additional_nic_config(priv);
}
static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
@@ -471,8 +472,8 @@ const struct iwl_cfg iwl130_bg_cfg = {
.eeprom_ver = EEPROM_6000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \
.lib = &iwl6000_lib, \
+ .additional_nic_config = iwl6000i_additional_nic_config,\
.base_params = &iwl6000_base_params, \
- .pa_type = IWL_PA_INTERNAL, \
.led_mode = IWL_LED_BLINK
const struct iwl_cfg iwl6000i_2agn_cfg = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-shared.h
index 55f9f07..2ab7462 100644
--- a/drivers/net/wireless/iwlwifi/iwl-shared.h
+++ b/drivers/net/wireless/iwlwifi/iwl-shared.h
@@ -209,16 +209,6 @@ enum iwl_ucode_type {
IWL_UCODE_WOWLAN,
};
-/**
- * enum iwl_pa_type - Power Amplifier type
- * @IWL_PA_SYSTEM: based on uCode configuration
- * @IWL_PA_INTERNAL: use Internal only
- */
-enum iwl_pa_type {
- IWL_PA_SYSTEM = 0,
- IWL_PA_INTERNAL = 1,
-};
-
/*
* LED mode
* IWL_LED_DEFAULT: use device default
@@ -299,7 +289,6 @@ struct iwl_base_params {
* @base_params: pointer to basic parameters
* @ht_params: point to ht patameters
* @bt_params: pointer to bt parameters
- * @pa_type: used by 6000 series only to identify the type of Power Amplifier
* @need_temp_offset_calib: need to perform temperature offset calibration
* @no_xtal_calib: some devices do not need crystal calibration data,
* don't send it to those
@@ -339,7 +328,6 @@ struct iwl_cfg {
/* params likely to change within a device family */
const struct iwl_ht_params *ht_params;
const struct iwl_bt_params *bt_params;
- enum iwl_pa_type pa_type; /* if used set to IWL_PA_SYSTEM */
const bool need_temp_offset_calib; /* if used set to true */
const bool no_xtal_calib;
u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
