Wireless Broadcom chips can have either their SPROM data stored on either external SPROM or on-chip OTP memory. Both are accessed through the same register space. This patch adds support for the on-chip OTP memory. Tested with: BCM43224 OTP and SPROM BCM4331 SPROM BCM4313 OTP This patch is in response to linux-wireless thread [1]. [1] http://article.gmane.org/gmane.linux.kernel.wireless.general/85426 Tested-by: Saul St. John <saul.stjohn@xxxxxxxxx> Tested-by: Rafal Milecki <zajec5@xxxxxxxxx> Tested-by: Hauke Mehrtens <hauke@xxxxxxxxxx> Cc: Larry Finger <Larry.Finger@xxxxxxxxxxxx> Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx> --- drivers/bcma/sprom.c | 126 ++++++++++++++++++++++---- include/linux/bcma/bcma_driver_chipcommon.h | 10 ++- 2 files changed, 115 insertions(+), 21 deletions(-) diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c index fba8066..cdcf75c 100644 --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -300,37 +300,128 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) SSB_SROM8_FEM_ANTSWLUT_SHIFT); } -static bool bcma_is_sprom_available(struct bcma_bus *bus) +/* + * Indicates the presence of external SPROM. + */ +static bool bcma_sprom_ext_available(struct bcma_bus *bus) { - u32 sromctrl; + u32 chip_status; + u32 srom_control; + u32 present_mask; - if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) - return false; + if (bus->drv_cc.core->id.rev >= 31) { + if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) + return false; - if (bus->drv_cc.core->id.rev >= 32) { - sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL); - return sromctrl & BCMA_CC_SROM_CONTROL_PRESENT; + srom_control = bcma_read32(bus->drv_cc.core, + BCMA_CC_SROM_CONTROL); + return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; } - return true; + + /* older chipcommon revisions use chip status register */ + chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); + switch (bus->chipinfo.id) { + case 0x4313: + present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; + break; + + case 0x4331: + present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; + break; + + default: + return true; + } + + return chip_status & present_mask; +} + +/* + * Indicates that on-chip OTP memory is present and enabled. + */ +static bool bcma_sprom_onchip_available(struct bcma_bus *bus) +{ + u32 chip_status; + u32 otpsize = 0; + bool present; + + chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); + switch (bus->chipinfo.id) { + case 0x4313: + present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; + break; + + case 0x4331: + present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; + break; + + case 43224: + case 43225: + /* for these chips OTP is always available */ + present = true; + break; + + default: + present = false; + break; + } + + if (present) { + otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; + otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; + } + + return otpsize != 0; +} + +/* + * Verify OTP is filled and determine the byte + * offset where SPROM data is located. + * + * On error, returns 0; byte offset otherwise. + */ +static int bcma_sprom_onchip_offset(struct bcma_bus *bus) +{ + struct bcma_device *cc = bus->drv_cc.core; + u32 offset; + + /* verify OTP status */ + if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) + return 0; + + /* obtain bit offset from otplayout register */ + offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); + return BCMA_CC_SPROM + (offset >> 3); } int bcma_sprom_get(struct bcma_bus *bus) { - u16 offset; + u16 offset = BCMA_CC_SPROM; u16 *sprom; int err = 0; if (!bus->drv_cc.core) return -EOPNOTSUPP; - if (!bcma_is_sprom_available(bus)) { + if (!bcma_sprom_ext_available(bus)) { /* - * Maybe there is no SPROM on the device? - * Now we ask the arch code if there is some sprom - * available for this device in some other storage. + * External SPROM takes precedence so check + * on-chip OTP only when no external SPROM + * is present. */ - err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); - return err; + if (bcma_sprom_onchip_available(bus)) { + /* determine offset */ + offset = bcma_sprom_onchip_offset(bus); + } + if (!offset) { + /* + * Maybe there is no SPROM on the device? + * Now we ask the arch code if there is some sprom + * available for this device in some other storage. + */ + err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); + return err; + } } sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), @@ -341,11 +432,6 @@ int bcma_sprom_get(struct bcma_bus *bus) if (bus->chipinfo.id == 0x4331) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); - /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). - * According to brcm80211 this applies to cards with PCIe rev >= 6 - * TODO: understand this condition and use it */ - offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : - BCMA_CC_SPROM_PCIE6; pr_debug("SPROM offset 0x%x\n", offset); bcma_sprom_read(bus, offset, sprom); diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index e72938b..8bbfe31 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -56,6 +56,9 @@ #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 +#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ +#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 +#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ #define BCMA_CC_OTPC 0x0014 /* OTP control */ #define BCMA_CC_OTPC_RECWAIT 0xFF000000 #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -72,6 +75,8 @@ #define BCMA_CC_OTPP_READ 0x40000000 #define BCMA_CC_OTPP_START 0x80000000 #define BCMA_CC_OTPP_BUSY 0x80000000 +#define BCMA_CC_OTPL 0x001C /* OTP layout */ +#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ #define BCMA_CC_IRQSTAT 0x0020 #define BCMA_CC_IRQMASK 0x0024 #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -79,6 +84,10 @@ #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 +#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 +#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 +#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -256,7 +265,6 @@ #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
