> On 03/05/12, Larry Finger wrote:
>> On 03/05/2012 11:07 AM, alupu@xxxxxxxxxxx wrote:
>> System: (B)LFS i686-pc-linux-gnu, 3.2.9
>> Rosewill Wireless Adapter: RNX-N180UBE
>> I compiled (as part of kernel 3.2.9) the r8712u module.
>> Comes up OK but cannot take an essid nor a key.
>> ...
> There are a couple of bugs in 3.2.6+.
> I don't think they have been fixed by 3.2.9.
> Check dmesg for a "Badfw size" message.
> If you see that, the two attached patches will fix that.
Hi Larry,
Thank you for the patches.
Unfortunately, no cigar:
<After kernel re-compile>
usb 8-1: new high-speed USB device number 2 using ehci_hcd
r8712u: module is from the staging directory, the quality is unknown,
you have been warned.
r8712u: DriverVersion: v7_0.20100831
r8712u: register rtl8712_netdev_ops to netdev_ops
r8712u: USB_SPEED_HIGH with 4 endpoints
r8712u: Boot from EFUSE: Autoload OK
r8712u: CustomerID = 0x0000
r8712u: MAC Address from efuse = 00:1a:ef:25:2d:f9
r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
usbcore: registered new interface driver r8712u
r8712u: r8711_wx_set_enc: IW_ENCODE_RESTRICTED
usb 8-1: USB disconnect, device number 2
NOTE: I haven't seen any "Badfw size" message.
I applied the patches, hope against hope.
(maybe, as a side effect, it can fix my problem)
------
iwconfig
lo no wireless extensions.
wlan0 unassociated Nickname:"rtl_wifi"
Mode:Auto Access Point: Not-Associated Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth0 no wireless extensions.
------
iwconfig wlan0 essid <ESSIS> key restricted <Encryption Key>
r8712u: r8711_wx_set_enc: IW_ENCODE_RESTRICTED
iwconfig wlan0
wlan0 unassociated Nickname:"rtl_wifi"
Mode:Auto Access Point: Not-Associated Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
NOTE: 'iwconfig wlan0 essid ' and 'iwconfig wlan0 key restricted '
can be tried separately, with or without double quotes
(for the particular ESSID or KEY), with the same failed result.
------
iwconfig wlan0 Mode managed
iwconfig wlan0
wlan0 unassociated Nickname:"rtl_wifi"
Mode:Managed Access Point: Not-Associated Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
------
Any idea what's happening?
Thanks,
-- Alex
---------------------------------------------------
For reference:
[/linux-3.2.9/drivers/staging/rtl8712]$ ls -og os_intfs.c* usb_intf.c*
-rw-rw-r-- 1 15584 2012-03-05 19:25 os_intfs.c
-rw-rw-r-- 1 15781 2012-02-29 19:32 os_intfs.c-orig
-rw-rw-r-- 1 18798 2012-03-05 19:25 usb_intf.c
-rw-rw-r-- 1 18609 2012-02-29 19:32 usb_intf.c-orig
------
[/linux-3.2.9/drivers/staging/rtl8712]$ diff os_intfs.c os_intfs.c.orig
478a479,483
> /* The interface is no longer Up: */
> padapter->bup = false;
> release_firmware(padapter->fw);
> /* never exit with a firmware callback pending */
> wait_for_completion(&padapter->rtl8712_fw_ready);
------
[/linux-3.2.9/drivers/staging/rtl8712]$ diff usb_intf.c usb_intf.c.orig
33d32
< #include
625,628d623
< if (padapter->fw_found)
< release_firmware(padapter->fw);
< /* never exit with a firmware callback pending */
< wait_for_completion(&padapter->rtl8712_fw_ready);
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
