From: Johannes Berg <johannes.berg@xxxxxxxxx>
This is used from there, so should be in it.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-core.h | 42 ----------------------------
drivers/net/wireless/iwlwifi/iwl-shared.h | 43 +++++++++++++++++++++++++++++
2 files changed, 43 insertions(+), 42 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index db44115..7259cbf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -96,48 +96,6 @@ struct iwl_lib_ops {
};
/*
- * @max_ll_items: max number of OTP blocks
- * @shadow_ram_support: shadow support for OTP memory
- * @led_compensation: compensate on the led on/off time per HW according
- * to the deviation to achieve the desired led frequency.
- * The detail algorithm is described in iwl-led.c
- * @chain_noise_num_beacons: number of beacons used to compute chain noise
- * @adv_thermal_throttle: support advance thermal throttle
- * @support_ct_kill_exit: support ct kill exit condition
- * @support_wimax_coexist: support wimax/wifi co-exist
- * @plcp_delta_threshold: plcp error rate threshold used to trigger
- * radio tuning when there is a high receiving plcp error rate
- * @chain_noise_scale: default chain noise scale used for gain computation
- * @wd_timeout: TX queues watchdog timeout
- * @max_event_log_size: size of event log buffer size for ucode event logging
- * @shadow_reg_enable: HW shadhow register bit
- * @no_idle_support: do not support idle mode
- * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
- * wd_disable: disable watchdog timer
- */
-struct iwl_base_params {
- int eeprom_size;
- int num_of_queues; /* def: HW dependent */
- int num_of_ampdu_queues;/* def: HW dependent */
- /* for iwl_apm_init() */
- u32 pll_cfg_val;
-
- const u16 max_ll_items;
- const bool shadow_ram_support;
- u16 led_compensation;
- bool adv_thermal_throttle;
- bool support_ct_kill_exit;
- const bool support_wimax_coexist;
- u8 plcp_delta_threshold;
- s32 chain_noise_scale;
- unsigned int wd_timeout;
- u32 max_event_log_size;
- const bool shadow_reg_enable;
- const bool no_idle_support;
- const bool hd_v2;
- const bool wd_disable;
-};
-/*
* @advanced_bt_coexist: support advanced bt coexist
* @bt_init_traffic_load: specify initial bt traffic load
* @bt_prio_boost: default bt priority boost value
diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-shared.h
index b816e70..ef80e03 100644
--- a/drivers/net/wireless/iwlwifi/iwl-shared.h
+++ b/drivers/net/wireless/iwlwifi/iwl-shared.h
@@ -267,6 +267,49 @@ enum iwl_led_mode {
IWL_LED_DISABLE,
};
+/*
+ * @max_ll_items: max number of OTP blocks
+ * @shadow_ram_support: shadow support for OTP memory
+ * @led_compensation: compensate on the led on/off time per HW according
+ * to the deviation to achieve the desired led frequency.
+ * The detail algorithm is described in iwl-led.c
+ * @chain_noise_num_beacons: number of beacons used to compute chain noise
+ * @adv_thermal_throttle: support advance thermal throttle
+ * @support_ct_kill_exit: support ct kill exit condition
+ * @support_wimax_coexist: support wimax/wifi co-exist
+ * @plcp_delta_threshold: plcp error rate threshold used to trigger
+ * radio tuning when there is a high receiving plcp error rate
+ * @chain_noise_scale: default chain noise scale used for gain computation
+ * @wd_timeout: TX queues watchdog timeout
+ * @max_event_log_size: size of event log buffer size for ucode event logging
+ * @shadow_reg_enable: HW shadhow register bit
+ * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
+ * @no_idle_support: do not support idle mode
+ * wd_disable: disable watchdog timer
+ */
+struct iwl_base_params {
+ int eeprom_size;
+ int num_of_queues; /* def: HW dependent */
+ int num_of_ampdu_queues;/* def: HW dependent */
+ /* for iwl_apm_init() */
+ u32 pll_cfg_val;
+
+ const u16 max_ll_items;
+ const bool shadow_ram_support;
+ u16 led_compensation;
+ bool adv_thermal_throttle;
+ bool support_ct_kill_exit;
+ const bool support_wimax_coexist;
+ u8 plcp_delta_threshold;
+ s32 chain_noise_scale;
+ unsigned int wd_timeout;
+ u32 max_event_log_size;
+ const bool shadow_reg_enable;
+ const bool hd_v2;
+ const bool no_idle_support;
+ const bool wd_disable;
+};
+
/**
* struct iwl_cfg
* @name: Offical name of the device
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
