The patch contains firmware downloading code for the cw1200 device driver.
Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@xxxxxxxxxxxxxx>
---
drivers/staging/cw1200/fwio.c | 593 +++++++++++++++++++++++++++++++++++++++++
drivers/staging/cw1200/fwio.h | 36 +++
2 files changed, 629 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/cw1200/fwio.c
create mode 100644 drivers/staging/cw1200/fwio.h
diff --git a/drivers/staging/cw1200/fwio.c b/drivers/staging/cw1200/fwio.c
new file mode 100644
index 0000000..9452125
--- /dev/null
+++ b/drivers/staging/cw1200/fwio.c
@@ -0,0 +1,593 @@
+/*
+ * Firmware I/O code for mac80211 ST-Ericsson CW1200 drivers
+ *
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@xxxxxxxxxxxxxx>
+ *
+ * Based on:
+ * ST-Ericsson UMAC CW1200 driver which is
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Ajitpal Singh <ajitpal.singh@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/sched.h>
+#include <linux/firmware.h>
+
+#include "cw1200.h"
+#include "fwio.h"
+#include "hwio.h"
+#include "sbus.h"
+#include "bh.h"
+
+static int cw1200_get_hw_type(u32 config_reg_val, int *major_revision)
+{
+ int hw_type = -1;
+ u32 silicon_type = (config_reg_val >> 24) & 0x3;
+ u32 silicon_vers = (config_reg_val >> 31) & 0x1;
+
+ /* Check if we have CW1200 or STLC9000 */
+ if ((silicon_type == 0x1) || (silicon_type == 0x2)) {
+ *major_revision = silicon_type;
+ if (silicon_vers)
+ hw_type = HIF_8601_VERSATILE;
+ else
+ hw_type = HIF_8601_SILICON;
+ } else {
+ *major_revision = 1;
+ hw_type = HIF_9000_SILICON_VERSTAILE;
+ }
+
+ return hw_type;
+}
+
+static int config_reg_read_stlc9000(struct cw1200_common *priv,
+ u16 reg, u32 *val)
+{
+ u16 val16;
+ int ret = cw1200_reg_read_16(priv, reg, &val16);
+ if (ret < 0)
+ return ret;
+ *val = val16;
+ return 0;
+}
+
+static int config_reg_write_stlc9000(struct cw1200_common *priv,
+ u16 reg, u32 val)
+{
+ return cw1200_reg_write_16(priv, reg, (u16)val);
+}
+
+static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
+{
+ int ret, block, num_blocks;
+ unsigned i;
+ u32 val32;
+ u32 put = 0, get = 0;
+ u8 *buf = NULL;
+ const char *fw_path;
+ const struct firmware *firmware = NULL;
+
+ /* Macroses are local. */
+#define APB_WRITE(reg, val) \
+ do { \
+ ret = cw1200_apb_write_32(priv, CW12000_APB(reg), (val)); \
+ if (ret < 0) { \
+ cw1200_dbg(CW1200_DBG_ERROR, \
+ "%s: can't write %s at line %d.\n", \
+ __func__, #reg, __LINE__); \
+ goto error; \
+ } \
+ } while (0)
+#define APB_READ(reg, val) \
+ do { \
+ ret = cw1200_apb_read_32(priv, CW12000_APB(reg), &(val)); \
+ if (ret < 0) { \
+ cw1200_dbg(CW1200_DBG_ERROR, \
+ "%s: can't read %s at line %d.\n", \
+ __func__, #reg, __LINE__); \
+ goto error; \
+ } \
+ } while (0)
+#define REG_WRITE(reg, val) \
+ do { \
+ ret = cw1200_reg_write_32(priv, (reg), (val)); \
+ if (ret < 0) { \
+ cw1200_dbg(CW1200_DBG_ERROR, \
+ "%s: can't write %s at line %d.\n", \
+ __func__, #reg, __LINE__); \
+ goto error; \
+ } \
+ } while (0)
+#define REG_READ(reg, val) \
+ do { \
+ ret = cw1200_reg_read_32(priv, (reg), &(val)); \
+ if (ret < 0) { \
+ cw1200_dbg(CW1200_DBG_ERROR, \
+ "%s: can't read %s at line %d.\n", \
+ __func__, #reg, __LINE__); \
+ goto error; \
+ } \
+ } while (0)
+
+ switch (priv->hw_revision) {
+ case CW1200_HW_REV_CUT10:
+ fw_path = FIRMWARE_CUT10;
+ break;
+ case CW1200_HW_REV_CUT11:
+ fw_path = FIRMWARE_CUT11;
+ break;
+ case CW1200_HW_REV_CUT20:
+ fw_path = FIRMWARE_CUT20;
+ break;
+ case CW1200_HW_REV_CUT22:
+ fw_path = FIRMWARE_CUT22;
+ break;
+ default:
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: invalid silicon revision %d.\n",
+ __func__, priv->hw_revision);
+ return -EINVAL;
+ }
+
+ /* Initialize common registers */
+ APB_WRITE(DOWNLOAD_IMAGE_SIZE_REG, DOWNLOAD_ARE_YOU_HERE);
+ APB_WRITE(DOWNLOAD_PUT_REG, 0);
+ APB_WRITE(DOWNLOAD_GET_REG, 0);
+ APB_WRITE(DOWNLOAD_STATUS_REG, DOWNLOAD_PENDING);
+ APB_WRITE(DOWNLOAD_FLAGS_REG, 0);
+
+ /* Write the NOP Instruction */
+ REG_WRITE(ST90TDS_SRAM_BASE_ADDR_REG_ID, 0xFFF20000);
+ REG_WRITE(ST90TDS_AHB_DPORT_REG_ID, 0xEAFFFFFE);
+
+ /* Release CPU from RESET */
+ REG_READ(ST90TDS_CONFIG_REG_ID, val32);
+ val32 &= ~ST90TDS_CONFIG_CPU_RESET_BIT;
+ REG_WRITE(ST90TDS_CONFIG_REG_ID, val32);
+
+ /* Enable Clock */
+ val32 &= ~ST90TDS_CONFIG_CPU_CLK_DIS_BIT;
+ REG_WRITE(ST90TDS_CONFIG_REG_ID, val32);
+
+ /* Load a firmware file */
+ ret = request_firmware(&firmware, fw_path, priv->pdev);
+ if (ret) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: can't load firmware file %s.\n",
+ __func__, fw_path);
+ goto error;
+ }
+ BUG_ON(!firmware->data);
+
+ buf = kmalloc(DOWNLOAD_BLOCK_SIZE, GFP_KERNEL | GFP_DMA);
+ if (!buf) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: can't allocate firmware buffer.\n", __func__);
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ /* Check if the bootloader is ready */
+ for (i = 0; i < 100; i += 1 + i / 2) {
+ APB_READ(DOWNLOAD_IMAGE_SIZE_REG, val32);
+ if (val32 == DOWNLOAD_I_AM_HERE)
+ break;
+ mdelay(i);
+ } /* End of for loop */
+
+ if (val32 != DOWNLOAD_I_AM_HERE) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: bootloader is not ready.\n", __func__);
+ ret = -ETIMEDOUT;
+ goto error;
+ }
+
+ /* Calculcate number of download blocks */
+ num_blocks = (firmware->size - 1) / DOWNLOAD_BLOCK_SIZE + 1;
+
+ /* Updating the length in Download Ctrl Area */
+ val32 = firmware->size; /* Explicit cast from size_t to u32 */
+ APB_WRITE(DOWNLOAD_IMAGE_SIZE_REG, val32);
+
+ /* Firmware downloading loop */
+ for (block = 0; block < num_blocks ; block++) {
+ size_t tx_size;
+ size_t block_size;
+
+ /* check the download status */
+ APB_READ(DOWNLOAD_STATUS_REG, val32);
+ if (val32 != DOWNLOAD_PENDING) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: bootloader reported error %d.\n",
+ __func__, val32);
+ ret = -EIO;
+ goto error;
+ }
+
+ /* loop until put - get <= 24K */
+ for (i = 0; i < 100; i++) {
+ APB_READ(DOWNLOAD_GET_REG, get);
+ if ((put - get) <=
+ (DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE))
+ break;
+ mdelay(i);
+ }
+
+ if ((put - get) > (DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE)) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: Timeout waiting for FIFO.\n",
+ __func__);
+ return -ETIMEDOUT;
+ }
+
+ /* calculate the block size */
+ tx_size = block_size = min((size_t)(firmware->size - put),
+ (size_t)DOWNLOAD_BLOCK_SIZE);
+
+ memcpy(buf, &firmware->data[put], block_size);
+ if (block_size < DOWNLOAD_BLOCK_SIZE) {
+ memset(&buf[block_size],
+ 0, DOWNLOAD_BLOCK_SIZE - block_size);
+ tx_size = DOWNLOAD_BLOCK_SIZE;
+ }
+
+ /* send the block to sram */
+ ret = cw1200_apb_write(priv,
+ CW12000_APB(DOWNLOAD_FIFO_OFFSET +
+ (put & (DOWNLOAD_FIFO_SIZE - 1))),
+ buf, tx_size);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: can't write block at line %d.\n",
+ __func__, __LINE__);
+ goto error;
+ }
+
+ /* update the put register */
+ put += block_size;
+ APB_WRITE(DOWNLOAD_PUT_REG, put);
+ } /* End of firmware download loop */
+
+ /* Wait for the download completion */
+ for (i = 0; i < 300; i += 1 + i / 2) {
+ APB_READ(DOWNLOAD_STATUS_REG, val32);
+ if (val32 != DOWNLOAD_PENDING)
+ break;
+ mdelay(i);
+ }
+ if (val32 != DOWNLOAD_SUCCESS) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: wait for download completion failed. " \
+ "Read: 0x%.8X\n", __func__, val32);
+ ret = -ETIMEDOUT;
+ goto error;
+ } else {
+ cw1200_dbg(CW1200_DBG_MSG,
+ "Firmware download completed.\n");
+ ret = 0;
+ }
+
+error:
+ kfree(buf);
+ if (firmware)
+ release_firmware(firmware);
+ return ret;
+
+#undef APB_WRITE
+#undef APB_READ
+#undef REG_WRITE
+#undef REG_READ
+}
+
+int cw1200_load_firmware(struct cw1200_common *priv)
+{
+ int ret;
+ int i;
+ u32 val32;
+ u16 val16;
+ u32 dpll = 0;
+ int major_revision;
+ int (*config_reg_read)(struct cw1200_common *priv, u16 reg, u32 *val);
+ int (*config_reg_write)(struct cw1200_common *priv, u16 reg, u32 val);
+
+ BUG_ON(!priv);
+
+ /* Read CONFIG Register Value - We will read 32 bits */
+ ret = cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: can't read config register.\n", __func__);
+ goto out;
+ }
+
+ priv->hw_type = cw1200_get_hw_type(val32, &major_revision);
+ if (priv->hw_type < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: can't deduct hardware type.\n", __func__);
+ ret = -ENOTSUPP;
+ goto out;
+ }
+
+ switch (priv->hw_type) {
+ case HIF_8601_VERSATILE:
+ case HIF_8601_SILICON:
+ dpll = DPLL_INIT_VAL_CW1200;
+ config_reg_read = cw1200_reg_read_32;
+ config_reg_write = cw1200_reg_write_32;
+ break;
+ case HIF_9000_SILICON_VERSTAILE:
+ dpll = DPLL_INIT_VAL_9000;
+ config_reg_read = config_reg_read_stlc9000;
+ config_reg_write = config_reg_write_stlc9000;
+ break;
+ default:
+ BUG_ON(1);
+ }
+
+ ret = cw1200_reg_write_32(priv, ST90TDS_TSET_GEN_R_W_REG_ID, dpll);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: can't write DPLL register.\n", __func__);
+ goto out;
+ }
+
+ msleep(20);
+
+ /* Read DPLL Reg value and compare with value written */
+ ret = cw1200_reg_read_32(priv,
+ ST90TDS_TSET_GEN_R_W_REG_ID, &val32);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: can't read DPLL register.\n", __func__);
+ goto out;
+ }
+
+ if (val32 != dpll) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: unable to initialise " \
+ "DPLL register. Wrote 0x%.8X, read 0x%.8X.\n",
+ __func__, dpll, val32);
+ ret = -EIO;
+ goto out;
+ }
+
+ /* Set wakeup bit in device */
+ ret = cw1200_reg_read_16(priv, ST90TDS_CONTROL_REG_ID, &val16);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: set_wakeup: can't read " \
+ "control register.\n", __func__);
+ goto out;
+ }
+
+ ret = cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID,
+ val16 | ST90TDS_CONT_WUP_BIT);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: set_wakeup: can't write " \
+ "control register.\n", __func__);
+ goto out;
+ }
+
+ /* Wait for wakeup */
+ for (i = 0 ; i < 300 ; i += 1 + i / 2) {
+ ret = cw1200_reg_read_16(priv,
+ ST90TDS_CONTROL_REG_ID, &val16);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: wait_for_wakeup: can't read " \
+ "control register.\n", __func__);
+ goto out;
+ }
+
+ if (val16 & ST90TDS_CONT_RDY_BIT) {
+ cw1200_dbg(CW1200_DBG_MSG,
+ "WLAN device is ready.\n");
+ break;
+ }
+ msleep(i);
+ }
+
+ if ((val16 & ST90TDS_CONT_RDY_BIT) == 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: wait_for_wakeup: device is not responding.\n",
+ __func__);
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ if (major_revision == 1) {
+ /* CW1200 Hardware detection logic : Check for CUT1.1 */
+ ret = cw1200_ahb_read_32(priv, CW1200_CUT_ID_ADDR, &val32);
+ if (ret) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: HW detection: can't read CUT ID.\n",
+ __func__);
+ goto out;
+ }
+
+ switch (val32) {
+ case CW1200_CUT_11_ID_STR:
+ cw1200_dbg(CW1200_DBG_MSG,
+ "Cut 1.1 silicon is detected.\n");
+ priv->hw_revision = CW1200_HW_REV_CUT11;
+ break;
+ default:
+ cw1200_dbg(CW1200_DBG_MSG,
+ "Cut 1.0 silicon is detected.\n");
+ priv->hw_revision = CW1200_HW_REV_CUT10;
+ break;
+ }
+ } else if (major_revision == 2) {
+ u32 ar1, ar2, ar3;
+ cw1200_dbg(CW1200_DBG_MSG, "Cut 2.x silicon is detected.\n");
+
+ ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR, &ar1);
+ if (ret) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: (1) HW detection: can't read CUT ID.\n",
+ __func__);
+ goto out;
+ }
+ ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR + 4, &ar2);
+ if (ret) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: (2) HW detection: can't read CUT ID.\n",
+ __func__);
+ goto out;
+ }
+
+ ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR + 8, &ar3);
+ if (ret) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: (3) HW detection: can't read CUT ID.\n",
+ __func__);
+ goto out;
+ }
+
+ if (ar1 == CW1200_CUT_22_ID_STR1 &&
+ ar2 == CW1200_CUT_22_ID_STR2 &&
+ ar3 == CW1200_CUT_22_ID_STR3) {
+ cw1200_dbg(CW1200_DBG_MSG, "Cut 2.2 detected.\n");
+ priv->hw_revision = CW1200_HW_REV_CUT22;
+ } else {
+ cw1200_dbg(CW1200_DBG_MSG, "Cut 2.0 detected.\n");
+ priv->hw_revision = CW1200_HW_REV_CUT20;
+ }
+ } else {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: unsupported silicon major revision %d.\n",
+ __func__, major_revision);
+ ret = -ENOTSUPP;
+ goto out;
+ }
+
+ /* Checking for access mode */
+ ret = config_reg_read(priv, ST90TDS_CONFIG_REG_ID, &val32);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: check_access_mode: can't read " \
+ "config register.\n", __func__);
+ goto out;
+ }
+
+ if (val32 & ST90TDS_CONFIG_ACCESS_MODE_BIT) {
+ switch (priv->hw_type) {
+ case HIF_8601_SILICON:
+ cw1200_dbg(CW1200_DBG_MSG,
+ "%s: CW1200 detected.\n", __func__);
+ ret = cw1200_load_firmware_cw1200(priv);
+ break;
+ case HIF_8601_VERSATILE:
+ /* TODO: Not implemented yet!
+ ret = cw1200_load_firmware_cw1100(priv);
+ */
+ ret = -ENOTSUPP;
+ goto out;
+ case HIF_9000_SILICON_VERSTAILE:
+ /* TODO: Not implemented yet!
+ ret = cw1200_load_firmware_stlc9000(priv);
+ */
+ ret = -ENOTSUPP;
+ goto out;
+ default:
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: Unknown hardware: %d.\n",
+ __func__, priv->hw_type);
+ }
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: can't download firmware.\n", __func__);
+ goto out;
+ }
+ } else {
+ cw1200_dbg(CW1200_DBG_MSG,
+ "%s: check_access_mode: device is already " \
+ "in QUEUE mode.\n", __func__);
+ /* TODO: verify this branch. Do we need something to do? */
+ }
+
+ /* Register Interrupt Handler */
+ ret = priv->sbus_ops->irq_subscribe(priv->sbus_priv,
+ (sbus_irq_handler)cw1200_irq_handler, priv);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: can't register IRQ handler.\n", __func__);
+ goto out;
+ }
+
+ if (HIF_8601_SILICON == priv->hw_type) {
+ /* If device is CW1200 the IRQ enable/disable bits
+ * are in CONFIG register */
+ ret = config_reg_read(priv, ST90TDS_CONFIG_REG_ID, &val32);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: enable_irq: can't read " \
+ "config register.\n", __func__);
+ goto unsubscribe;
+ }
+ ret = config_reg_write(priv, ST90TDS_CONFIG_REG_ID,
+ val32 | ST90TDS_CONF_IRQ_RDY_ENABLE);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: enable_irq: can't write " \
+ "config register.\n", __func__);
+ goto unsubscribe;
+ }
+ } else {
+ /* If device is STLC9000 the IRQ enable/disable bits
+ * are in CONTROL register */
+ /* Enable device interrupts - Both DATA_RDY and WLAN_RDY */
+ ret = cw1200_reg_read_16(priv, ST90TDS_CONFIG_REG_ID, &val16);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: enable_irq: can't read " \
+ "control register.\n", __func__);
+ goto unsubscribe;
+ }
+ ret = cw1200_reg_write_16(priv, ST90TDS_CONFIG_REG_ID,
+ val16 | ST90TDS_CONT_IRQ_RDY_ENABLE);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: enable_irq: can't write " \
+ "control register.\n", __func__);
+ goto unsubscribe;
+ }
+
+ }
+
+ /* Configure device for MESSSAGE MODE */
+ ret = config_reg_read(priv, ST90TDS_CONFIG_REG_ID, &val32);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: set_mode: can't read config register.\n",
+ __func__);
+ goto unsubscribe;
+ }
+ ret = config_reg_write(priv, ST90TDS_CONFIG_REG_ID,
+ val32 & ~ST90TDS_CONFIG_ACCESS_MODE_BIT);
+ if (ret < 0) {
+ cw1200_dbg(CW1200_DBG_ERROR,
+ "%s: set_mode: can't write config register.\n",
+ __func__);
+ goto unsubscribe;
+ }
+
+ /* Unless we read the CONFIG Register we are
+ * not able to get an interrupt */
+ mdelay(10);
+ config_reg_read(priv, ST90TDS_CONFIG_REG_ID, &val32);
+
+out:
+ return ret;
+
+unsubscribe:
+ priv->sbus_ops->irq_unsubscribe(priv->sbus_priv);
+ return ret;
+}
diff --git a/drivers/staging/cw1200/fwio.h b/drivers/staging/cw1200/fwio.h
new file mode 100644
index 0000000..cb91b8d
--- /dev/null
+++ b/drivers/staging/cw1200/fwio.h
@@ -0,0 +1,36 @@
+/*
+ * Firmware API for mac80211 ST-Ericsson CW1200 drivers
+ *
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@xxxxxxxxxxxxxx>
+ *
+ * Based on:
+ * ST-Ericsson UMAC CW1200 driver which is
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Ajitpal Singh <ajitpal.singh@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef FWIO_H_INCLUDED
+#define FWIO_H_INCLUDED
+
+#define FIRMWARE_CUT22 ("cw1200/wsm_22.bin")
+#define FIRMWARE_CUT20 ("cw1200/wsm_20.bin")
+#define FIRMWARE_CUT11 ("cw1200/wsm_11.bin")
+#define FIRMWARE_CUT10 ("cw1200/wsm_10.bin")
+#define SDD_FILE_22 ("cw1200/sdd_22.bin")
+#define SDD_FILE_20 ("cw1200/sdd_20.bin")
+#define SDD_FILE_11 ("cw1200/sdd_11.bin")
+#define SDD_FILE_10 ("cw1200/sdd_10.bin")
+
+#define CW1200_HW_REV_CUT10 (10)
+#define CW1200_HW_REV_CUT11 (11)
+#define CW1200_HW_REV_CUT20 (20)
+#define CW1200_HW_REV_CUT22 (22)
+
+int cw1200_load_firmware(struct cw1200_common *priv);
+
+#endif
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
