This patch adds an attribute, NL80211_ATTR_INACTIVITY_TIMEOUT,
to set the inactivity timeout which can be used to remove the
station in AP mode. This can be passed in NL80211_CMD_START_AP
and used by the drivers which have AP MLME in firmware but
don't support get_station() properly. To disable inactivity
timer in userspace, wpa_s for example, there is a capability
flag, WIPHY_FLAG_SUPPORTS_INACTIVITY_TIMER, through which
drivers can register their capability to use the inactivity
timeout to free the stations.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@xxxxxxxxxxxxxxxx>
---
include/linux/nl80211.h | 17 +++++++++++++++--
include/net/cfg80211.h | 5 +++++
net/wireless/nl80211.c | 11 +++++++++++
3 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index be35a68..b03f860 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -168,8 +168,8 @@
* %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
* %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
* %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
- * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY and
- * %NL80211_ATTR_AUTH_TYPE.
+ * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
* @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
* @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
* @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
@@ -1197,6 +1197,15 @@ enum nl80211_commands {
* @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
* up to 16 TIDs.
*
+ * @NL80211_ATTR_INACTIVITY_TIMER_SUPPORT: Indicates if the driver has the
+ * capability to use %NL80211_ATTR_INACTIVITY_TIMEOUT for freeing up
+ * connected stations.
+ * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
+ * used by the drivers which has MLME in firmware and does not have support
+ * to report per station tx/rx activity to free up the staion entry from
+ * the list. This should not be sent from userspace when the driver does
+ * not register it's capability to timeout the stations.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1442,6 +1451,10 @@ enum nl80211_attrs {
NL80211_ATTR_NOACK_MAP,
+ NL80211_ATTR_INACTIVITY_TIMER_SUPPORT,
+
+ NL80211_ATTR_INACTIVITY_TIMEOUT,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 0178c74..1b3163c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -413,6 +413,7 @@ struct cfg80211_beacon_data {
* @crypto: crypto settings
* @privacy: the BSS uses privacy
* @auth_type: Authentication type (algorithm)
+ * @inactivity_timeout: time in seconds to determine station's inactivity.
*/
struct cfg80211_ap_settings {
struct cfg80211_beacon_data beacon;
@@ -424,6 +425,7 @@ struct cfg80211_ap_settings {
struct cfg80211_crypto_settings crypto;
bool privacy;
enum nl80211_auth_type auth_type;
+ int inactivity_timeout;
};
/**
@@ -1760,6 +1762,8 @@ struct cfg80211_ops {
* responds to probe-requests in hardware.
* @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
* @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
+ * @WIPHY_FLAG_SUPPORTS_INACTIVITY_TIMER: Device has support to remove inactive
+ * connected stations in AP mode.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -1783,6 +1787,7 @@ enum wiphy_flags {
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19),
WIPHY_FLAG_OFFCHAN_TX = BIT(20),
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21),
+ WIPHY_FLAG_SUPPORTS_INACTIVITY_TIMER = BIT(22),
};
/**
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 1998c36..eddd864 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -204,6 +204,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
.len = NL80211_HT_CAPABILITY_LEN
},
[NL80211_ATTR_NOACK_MAP] = { .type = NLA_U16 },
+ [NL80211_ATTR_INACTIVITY_TIMER_SUPPORT] = { .type = NLA_FLAG },
+ [NL80211_ATTR_INACTIVITY_TIMEOUT] = { .type = NLA_U16 },
};
/* policy for the key attributes */
@@ -749,6 +751,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
NLA_PUT_FLAG(msg, NL80211_ATTR_TDLS_SUPPORT);
if (dev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP)
NLA_PUT_FLAG(msg, NL80211_ATTR_TDLS_EXTERNAL_SETUP);
+ if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_INACTIVITY_TIMER)
+ NLA_PUT_FLAG(msg, NL80211_ATTR_INACTIVITY_TIMER_SUPPORT);
NLA_PUT(msg, NL80211_ATTR_CIPHER_SUITES,
sizeof(u32) * dev->wiphy.n_cipher_suites,
@@ -2214,6 +2218,13 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
if (err)
return err;
+ if (info->attrs[NL80211_ATTR_INACTIVITY_TIMEOUT]) {
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_INACTIVITY_TIMER))
+ return -EOPNOTSUPP;
+ params.inactivity_timeout = nla_get_u16(
+ info->attrs[NL80211_ATTR_INACTIVITY_TIMEOUT]);
+ }
+
err = rdev->ops->start_ap(&rdev->wiphy, dev, ¶ms);
if (!err)
wdev->beacon_interval = params.beacon_interval;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
