[PATCH] p54spi: Release GPIO lines and IRQ on error in p54spi_probe

[Max Filippov <jcmvbkbc@xxxxxxxxx>]

This makes it possible to reload driver if insmod has failed due to
missing firmware.

Signed-off-by: Max Filippov <jcmvbkbc@xxxxxxxxx>
---
 drivers/net/wireless/p54/p54spi.c |   14 ++++++++++----
 1 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 7faed62..f792990 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -618,19 +618,19 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "spi_setup failed");
-		goto err_free_common;
+		goto err_free;
 	}
 
 	ret = gpio_request(p54spi_gpio_power, "p54spi power");
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
-		goto err_free_common;
+		goto err_free;
 	}
 
 	ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
-		goto err_free_common;
+		goto err_free_gpio_power;
 	}
 
 	gpio_direction_output(p54spi_gpio_power, 0);
@@ -641,7 +641,7 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 			  priv->spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "request_irq() failed");
-		goto err_free_common;
+		goto err_free_gpio_irq;
 	}
 
 	irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
@@ -673,6 +673,12 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 	return 0;
 
 err_free_common:
+	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
+err_free_gpio_irq:
+	gpio_free(p54spi_gpio_irq);
+err_free_gpio_power:
+	gpio_free(p54spi_gpio_power);
+err_free:
 	p54_free_common(priv->hw);
 	return ret;
 }
-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html