Search Linux Wireless

Re: Instability in brcmsmac

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/19/2012 09:53 PM, Larry Finger wrote:
Arend,

I have just started testing brcmsmac with my BCM43224 card. I find it rather
unstable. A typical cycle between authentication and disassociating is as follows:

[ 1066.227729] wlan8: authenticate with 00:1a:70:46:ba:b1
[ 1066.238397] wlan8: send auth to 00:1a:70:46:ba:b1 (try 1/3)
[ 1066.440128] wlan8: send auth to 00:1a:70:46:ba:b1 (try 2/3)
[ 1066.443739] wlan8: authenticated
[ 1066.448139] wlan8: associate with 00:1a:70:46:ba:b1 (try 1/3)
[ 1066.456657] wlan8: RX AssocResp from 00:1a:70:46:ba:b1 (capab=0x411 status=0
aid=1)
[ 1066.456673] wlan8: associated
[ 1066.458051] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true
(implement)
[ 1066.458067] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 1066.458087] ieee80211 phy0: changing basic rates failed: -22
[ 1066.458101] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering:
enabled true, count 1 (implement)
[ 1076.464670] wlan8: disassociating from 00:1a:70:46:ba:b1 by local choice
(reason=3)
[ 1076.465981] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false
(implement)
[ 1076.466051] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 1076.466074] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering:
enabled false, count 1 (implement)
[ 1076.490224] cfg80211: Calling CRDA to update world regulatory domain
[ 1076.507338] wlan8: deauthenticating from 00:1a:70:46:ba:b1 by local choice
(reason=3)

The period of time that the interface is up ranges from 10 - 200 seconds. The
connection is WPA-TKIP and the kernel is master-2012-02-15-510-g20b79b4 from
wireless-testing with local patches applied to other drivers. Both brcmsmac and
bcma are untouched.

Thanks,

Larry

Hi Larry,

Thanks. There have been a couple of other people indicating a similar issue. We run tests nightly on bcm43224 equipped systems and brcmsmac mostly runs fine apart from occasional mac80211 interfacing issue, which is one reason to run these tests. I will dig deeper into this.

Gr. AvS

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux