W dniu 14 lutego 2012 17:22 użytkownik Saul St. John <saul.stjohn@xxxxxxxxx> napisał: > On Tue, Feb 14, 2012 at 7:34 AM, Rafał Miłecki <zajec5@xxxxxxxxx> wrote: >> W dniu 14 lutego 2012 05:01 użytkownik Saul St. John >> <saul.stjohn@xxxxxxxxx> napisał: >>> I don't know if this is correct in the general sense, but the wireless on my >>> mid-2010 MacBook Pro doesn't work without it. >>> >>> Signed-off-by: Saul St. John <saul.stjohn@xxxxxxxxx> >>> --- >>> drivers/bcma/sprom.c | 4 ++-- >>> 1 files changed, 2 insertions(+), 2 deletions(-) >>> >>> diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c >>> index 6f230fb..06c87b5 100644 >>> --- a/drivers/bcma/sprom.c >>> +++ b/drivers/bcma/sprom.c >>> @@ -228,8 +228,8 @@ int bcma_sprom_get(struct bcma_bus *bus) >>> /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). >>> * According to brcm80211 this applies to cards with PCIe rev >= 6 >>> * TODO: understand this condition and use it */ >>> - offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : >>> - BCMA_CC_SPROM_PCIE6; >>> + offset = (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43224) ? >>> + BCMA_CC_SPROM : BCMA_CC_SPROM_PCIE6; >>> bcma_sprom_read(bus, offset, sprom); >>> >>> if (bus->chipinfo.id == 0x4331) >> >> I'm quite sure it'll break my BCM43224. It's not chip-specific, >> probably some status bit specific. >> >> -- >> Rafał > > My BCM43324 was broken by bmca up until "[PATCH] bcma: don't fail for > bad SPROM CRC." Even with that patch, I still get "bmca: Failed to get > SPROM: -71" in the dmesg log. Is that error harmless? It's harmless for brcmsmac, which doesn't use SPROM struct of bcma bus driver. This bug should be fixed and brcmsmac should be improved in many contexts: using SPROM, standard bcma module functions, dropping other cores initializing. For now you can live with this. > The CRC check appears to pass without issue when using the 0x800 > offset on my device. The quick fix would be probably to implement in bcma two tries of reading SPROM. One for 0x800 second for 0x830 (base address). The real fix is to grab the real condition from specs/brcmsmac and implement it in bcma. -- Rafał -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html