Using AR_SREV_* macros for setting up the chip-specific NF
values will make adding support for new chips hard. Use separate
macros for each chip. Currently, AR9462 has the same value for
all NF limits.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 15 +++++++++++----
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 13 +++++++++----
2 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 2b0bfb8..70e27d2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1099,13 +1099,20 @@ static void ar9003_hw_set_nf_limits(struct ath_hw *ah)
{
ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9300_2GHZ;
ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9300_2GHZ;
- if (AR_SREV_9330(ah))
- ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9330_2GHZ;
- else
- ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9300_2GHZ;
+ ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9300_2GHZ;
ah->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9300_5GHZ;
ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9300_5GHZ;
ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9300_5GHZ;
+
+ if (AR_SREV_9330(ah))
+ ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9330_2GHZ;
+
+ if (AR_SREV_9462(ah)) {
+ ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9462_2GHZ;
+ ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9462_2GHZ;
+ ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9462_5GHZ;
+ ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9462_5GHZ;
+ }
}
/*
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index ed64114..aca24bf 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -325,13 +325,18 @@
#define AR_PHY_RX_OCGAIN (AR_AGC_BASE + 0x200)
-#define AR_PHY_CCA_NOM_VAL_9300_2GHZ (AR_SREV_9462(ah) ? -127 : -110)
-#define AR_PHY_CCA_NOM_VAL_9300_5GHZ (AR_SREV_9462(ah) ? -127 : -115)
-#define AR_PHY_CCA_MIN_GOOD_VAL_9300_2GHZ (AR_SREV_9462(ah) ? -127 : -125)
-#define AR_PHY_CCA_MIN_GOOD_VAL_9300_5GHZ (AR_SREV_9462(ah) ? -127 : -125)
+#define AR_PHY_CCA_NOM_VAL_9300_2GHZ -110
+#define AR_PHY_CCA_NOM_VAL_9300_5GHZ -115
+#define AR_PHY_CCA_MIN_GOOD_VAL_9300_2GHZ -125
+#define AR_PHY_CCA_MIN_GOOD_VAL_9300_5GHZ -125
#define AR_PHY_CCA_MAX_GOOD_VAL_9300_2GHZ -95
#define AR_PHY_CCA_MAX_GOOD_VAL_9300_5GHZ -100
+#define AR_PHY_CCA_NOM_VAL_9462_2GHZ -127
+#define AR_PHY_CCA_MIN_GOOD_VAL_9462_2GHZ -127
+#define AR_PHY_CCA_NOM_VAL_9462_5GHZ -127
+#define AR_PHY_CCA_MIN_GOOD_VAL_9462_5GHZ -127
+
#define AR_PHY_CCA_NOM_VAL_9330_2GHZ -118
/*
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
